RocketFish RF-VIDLED1 Guide d'installation rapide

Taper
Guide d'installation rapide
Installing your LED video light
1 Make sure that the upper lock ring is
screwed tightly against the LED video
light.
2 Unscrew the video light’s lower lock ring
to loosen it, then insert the camera hot
shoe mount into the camera hot shoe.
3 Tighten the lower lock ring against the
camera hot shoe.
Using your LED video light
1 Install batteries (2 × AA) according to
indications in the battery compartment.
2 Turn on the video light.
3 Turn the brightness controller to adjust
the brightness.
Combining multiple video lights
Multiple video lights can be combined
to provide increased illumination and to
better control of video lighting eects.
Attaching another LED video
light
Attach an additional LED video light by
inserting its camera hot shoe mount into
the expansion port of your existing LED
video light.
Package contents
LED video light
Quick Setup Guide
Features
Excellent for macro photography
Adjustable brightness for customized
control
QUICK SETUP GUIDE
LED Video Light
RF-VIDLED1
1 36 LEDs
2 Power switch
3 Brightness controller
4 Battery compartment
5 Upper lock ring
6 Lower lock ring
7 Camera hot shoe mount
8 Multiple light expansion ports
OFF/ON
RF-VIDLED1_12-0877_QSG_V1_EN.ai 1 8/31/2012 3:17:00 PMRF-VIDLED1_12-0877_QSG_V1_EN.ai 1 8/31/2012 3:17:00 PM
ENGLISH 12-0877
Specications
*Product design and specications are
subject to change without notice.
Important safety instructions
Do not expose to high temperature or
high humidity.
Do not handle with wet hands,
immerse in water, or expose to rain.
Observe precautions when handling
batteries:
Do not mix new and used batteries
or batteries of dierent types.
Do not put batteries into a re or
apply direct heat to them.
Batteries are prone to leakage when
fully discharged. To avoid damage to
the product, be sure to remove
batteries out when the product is
not used for a long time or when
batteries run out of charge.
Should liquid from batteries come
into contact with skin or clothing,
rinse immediately with fresh water.
DC power supply
Power (max.)
Color temperature
Brightness (max.)
Brightness control
LED beads
Dimensions
Net weight
3V (2 × AA batteries)
1.3W
3000~3300K
420 Lux (0.5m)
Variable (not stepped)
36
2.75 × 3.5 × 1.49 in.
(70 × 89 × 38 mm)
2.89 oz. (82 g)
FCC Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate this equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003; Cet
appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
One-year limited warranty
Visit www.rocketfishproducts.com for details.
Contact Rocketfish:
For customer service, call 1-800-620-2790
www.rocketfishproducts.com
© 2012 BBY Solutions, Inc. All Rights Reserved.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand
names are trademarks of their respective owners.
RF-VIDLED1_12-0877_QSG_V1_EN.ai 2 8/31/2012 3:17:00 PMRF-VIDLED1_12-0877_QSG_V1_EN.ai 2 8/31/2012 3:17:00 PM
  • Page 1 1
  • Page 2 2

RocketFish RF-VIDLED1 Guide d'installation rapide

Taper
Guide d'installation rapide

dans d''autres langues