Emac SMR120 Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

R03.001_22/04/2010
TECHNICAL FILE
Prole with a smoothed curve and reduced size, wich makes easier
the cleaning of difcult areas and avoids the germen accumulation.
The technology applied on its surface, protects it against harmful
organisms such as molds, fungi and bacteria. Its installation without
need of work, makes it perfect for rehabilitation or reform works.
It’s ideal for installations where high levels of hygiene and cleaning
are required or for homes for private use.
Novoescocia® 4 Mini
Material: Aluminium
Length: 8ft2in / 2,5 l.m.
Dimensions: h: 7/16” / 11 mm.
a: 9/16” / 15,3 mm.
Packaging: 50 u./box
Finishes:
General Features
Applications
Complementary pieces
Novoescocia® 4 mini has complementary pieces available ,made of Zamak, to achieve a perfect
nish.
Scope of Novoescocia® 4 Mini:
- Corners between wall and kitchen counter
- Perimeters in shower trays or bathtubes
- Wall-oor, wall-wall or wall-ceiling joints, horizontally and vertically
It’s ideal for bathrooms, kitchens, medical consultations, restaurants, etc...
Its design is versatile and is appropriate for homes, ofces, public buildings or installations with high
requirements of hygiene and cleaning.
Exterior angle Interior angle Cover
Page 1 of 3
with technology of control of microbial deterioration
Reg. 1673617-2
* Anthracite nish (138) does not have antibacterial technology
R03.001_22/04/2010
TECHNICAL FILE
Materials
Aluminium
Novoescocia® 4 Mini is a prole made by extrusion of aluminium. Its coating improves the corrosion
resistance and provides properties for control of microbial deterioration.
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
Zamak
The complementary pieces of Novoescocia® 4 Mini are made of Zamak. The zamak is a non ferrous
alloy of zinc with aluminium, magnesium and copper (UNE EN 1774). It is tough, has high hardness, high
mechanical strength and excellent plastic deformability.
The surface nish applied, protects the prole and is similar to Novoescocia® 4 Mini’s nishes.
*You can nd more information by consulting the Technical Files of the materials in www.emac.es
Technical Features and Tests
Alloy 6063 (L-3441/38-337)
Fire resistance M0 (UNE 23-727-90)
Bacterial growth resis-
tance
Reduction of bacterial growth in +99%
Reduction of magnitude of population >2.5
JIS Z 2801:2000
Stain resistance.
Kitchen furniture.
Not work surfaces.
Supercial resistance to foodstuff.
Unchanged.
UNE56842:2001
AIDI-
MA
Stain resistance.
Kitchen furniture.
Not work surfaces.
Supercial resistance to typical kitchen
cleaning
products.
Unchanged.
UNE56842:2001
AIDI-
MA
Stain resistance.
Bath furniture.
Fronts.
Supercial resistance to typical bathroom
cleaning products.
Unchanged.
UNE 56867:2002 AIDI-
MA
Surface resistance to
staining
Unchanged.
UNE EN 438-
2:2005
Apdo.23
AIDI-
MA
Control of the microbial deterioration
Page 2 of 3
Novoescocia® 4 mini has a specic coating which protects the initial properties of materials and
objects where it’s applied through the control of microbial deterioration. The technology applied to the
prole is a volatile compound resistant to high temperatures. Its ecacy extends along the prole’s life
and doesn’t suffer detriment in its activity because it’s not eliminated through daily cleaning.
Novoescocia® 4 Mini prevents, on the surface of its prole, the growth and migration of bacteria,
fungi, yeasts and molds, interfering with the gas permeability of the membrane (cellular breathing). In
this way, microorganism lose quickly its ability to grow and reproduce, producing its destruction. The
probability that microorganisms develope resistance to treatment is very low.
Novoescocia® 4 Mini is effective against a large number of bacteria among which are: Legionella
neumophilia,Escherichia Coli, Salmonella, Staphylococcos Aureus (SARM), Listeria Monocytogenes,
Pseudomonas Aeruginosa, Streptococcus Faecalis, Vibrio Parahaemolyticus y Enterobacter Aerogenes.
TECHNICAL FILE
R03.001_22/04/2010
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in tecnico@emac.es.
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Placement
1
2 3
4
To achieve a complete nish and protection, we recommend the installation of Novolistel® 3 in vertical
edges as a complement for these Novoescia®. This listello is available with the same covering with
control of microbial deterioration. The angle pieces allow its combination, guaranteing a perfect nish
in the joints. The are also available with the same covering.
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral. If a preserving agent is applied, as well as keep a very thin layer of water repellent, note that it
can’t be yellow,attract dust or dirt or have iridescent effects.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
Cleaning and maintenance
Indoors Wall tiling Pavements Recyclable
Page 3 of 3
To see the video, capture
this picture with your mobile
phone (QR code reader soft-
ware is necessary) or click on
the picture.
Clean the surface destinated to the installation of Novoescocia® 4 Mini.
1. Cover generously the back face of Novoescocia® 4 Mini with an adhesive silicone type such as “MS
Sealing/Express Adhesive” from Fischer.
2. Fill also the posterior cavity with the same adhesive to ensure a perfect sealing and good grip.
3. Place the Novoescocia® 4 Mini on the corner and press rmly ensuring a good contact between
both surfaces.
4.Finally clean the remaining material and let dry.
* In humid environments or in direct touch with water, it is recommended to seal the joints between Novoesco-
cias® with silicones.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Emac SMR120 Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues