LG UD501KOJ5 Manuel utilisateur

MFL63261231

Rev.00_042519

UD501KOJ5

www.lg.com

Please read this manual carefully before operating the appliance and retain it

for future reference.

OWNER’S MANUAL

DEHUMIDIFIER

ENGLISH

ESPAÑOL

FRANÇAIS

2

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

3 SAFETY INSTRUCTIONS

3 READ ALL INSTRUCTIONS BEFORE USE

3 IMPORTANT SAFETY INSTRUCTIONS

6 PRODUCT OVERVIEW

6 Front

6 Back

6 Components

7 BEFORE USE

8 OPERATION

8 Control Panel and Display

9 Dehumidifying

9 Setting the Timer

9 Timer function

10 Safety Standby Light

10 Bucket Full Light

10 Checking the Filter

10 Auto Defrost Light

10 Continuous Drainage Setup

11 Emptying the Water Bucket

12 Using the Pump

14 MAINTENANCE

14 Cleaning the Exterior

14 Cleaning the Water Bucket

15 Cleaning the Air Filter

16 Cleaning the Pump Filter

16 Storing the Product

17 SMART FUNCTIONS

17 Using LG SmartThinQ Application

17 Before Using LG SmartThinQ

18 Installing LG SmartThinQ

18 Registering the Product Via Wi-Fi

18 Wi-Fi Function

18 Wireless LAN Module Specifications

20 Open Source Software Notice Information

20 Using Smart Diagnosis™

20 Smart Diagnosis™ Through the Customer Information Center

21 TROUBLESHOOTING

SAFETY INSTRUCTIONS

3

ENGLISH

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on the appliance. Always

read and follow all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or injure you and others. All safety

messages will follow the safety alert symbol and either the word WARNING or CAUTION.

These words mean:

WARNING

Failure to follow the instructions could result in death or serious injury.

CAUTION

Failure to follow the instructions could result in personal injury or property damage.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, scalding, or injury to persons when

using this appliance, follow basic precautions, including the following:

INSTALLATION

• Adhere to all industry recommended safety procedures including the use of long-sleeved gloves

and safety glasses.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,

or has missing or broken parts, including a damaged cord or plug.

• Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

• When installing or moving the appliance, be careful not to pinch, crush, or damage the power

cord.

• Keep packing materials out of the reach of children. Packaging materials can be dangerous for

children. There is a risk of suffocation.

• Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked.

Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can

become airtight chambers.

• Store and install the appliance where it will not be exposed to temperatures below freezing or

exposed to outdoor weather conditions.

• Do not damage, alter, excessively bend, twist, pull, pinch or heat the power cord.

• Call an authorized service technician to repair or immediately replace all power cords that have

become damaged. Do not use a cord that shows cracks or abrasion damage along its length or

at either end.

• Do not use multiple-outlet adaptors with this dehumidifier.

!

4

SAFETY INSTRUCTIONS

ENGLISH

• Do not use the product if the outlet is damaged or loose.

• In the event of a gas leak (propane gas, LP gas, etc.) do not operate this or any other appliance.

Open a window or door to ventilate the area immediately.

• Do not disassemble, repair or modify the product.

• Do not store or use flammable gases or materials near the dehumidifier.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the appliance.

OPERATION

• Read all instructions before using the appliance and save these instructions.

• Do not tamper with controls.

• If the product has been submerged, contact an LG Electronics customer information center for

instructions before resuming use.

• Push the power plug all the way into the wall outlet so that it is not loose.

• Do not grasp the power cord or touch the appliance controls with wet hands.

• Do not modify or extend the power cord.

• If the product makes a strange noise or emits a smell or smoke, pull the power plug out and

contact an LG Electronics customer information center.

• Avoid placing the dehumidifier or other heavy objects on top of the power cord.

• Do not use water to clean the dehumidifier.

• Keep the air inlet and outlet free from obstructions.

• Do not cover the power cord with a rug or carpeting.

Placing heavy objects on top of the cord could damage it.

• Do not place combustion appliances directly in the path of the dehumidifier’s airway.

Doing so could result in incomplete combustion or deformation by heat.

• Keep the product away from open flames.

• Do not use the product in places where it could be splashed by water.

• Do not insert fingers, sticks etc. into the air inlet or outlet.

The fan is running at high speeds and could cause personal injuries.

• Do not repair or replace any part of the appliance. All repairs and servicing must be performed

by qualified service personnel unless specifically recommended in this owner’s manual. Use

only authorized factory parts.

• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.

SAFETY INSTRUCTIONS

5

ENGLISH

CAUTION

To reduce the risk of injury to persons, malfunction, or damage to the product or property when

using the appliance, follow basic safety precautions, including the following:

INSTALLATION

• Use this appliance only for its intended purpose.

This product is not designed for preserving precision instruments, tableware or art works.

• Use the appliance only in a well-ventilated area.

Keep the area well ventilated, especially if also using a combustion appliance. Inadequate

ventilation reduces the oxygen level in the air.

• Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull

straight out from the outlet.

• Do not use the product in places where chemicals are used.

Chemicals and solvents dissolved in the air in places such as hospitals, factories, laboratories

and hair salons could cause product deformation and leaking, resulting in property damage.

• Turn off the dehumidifier and pull out the power plug before cleaning.

Wait for the fan to stop moving.

• Do not operate the dehumidifier without a filter.

Using the product without a filter could result in a reduced product lifespan, electric shock or

injury.

OPERATION

• Do not use the product for preserving animals/plants, precision instruments, art works etc.

• Do not place vases or water jars on the dehumidifier.

• Turn off the dehumidifier and empty the water bucket before moving the dehumidifier.

• Pull out the power plug if you will not be using the product for an extended period.

• Do not use the product in a very small space such as a closet.

Poor ventilation could result in overheating or fire.

• Do not use wax, thinner or a strong detergent when cleaning. Wipe the product using a soft

cloth.

Using inappropriate cleaning products could cause the product to become discolored or develop

surface flaws.

• Do not use the product in direct sunlight or rain.

• Do not touch the product with wet hands.

• Position the product on a firm, stable surface.

• Remove cable ties and extend power cord before use.

• Do not spray foreign substances or water on the product.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

!

6

PRODUCT OVERVIEW

ENGLISH

Components

Power cord and plug may differ depending on the country where the product is purchased.

Long pump hose

16 1/4 ft. (5 m)

Short pump hose

Drainage adapter

※ Screw provided

Owner’s manual

Hose cover

Air ﬁlter

Air Inlet

Draws in air from room

and absorbs moisture

Power plug

Casters

Air outlet

Display

Cover

Water bucket

Stores dehumidified water

Owner’s

manual

Back

PRODUCT OVERVIEW

Front

BEFORE USE

7

ENGLISH

BEFORE USE

Indoor temperature and relative humidity affect dehumidification.

- Dehumidification is decreased if the temperature or relative humidity is low.

- The product does not operate unless the desired humidity level is lower than the current

humidity level.

This product operates at temperatures from 41 °F - 90 °F (5 °C - 32 °C).

- At temperatures of 32 °F (0 °C) or less, water freezes inside the product.

- At temperatures over 90 °F (32 °C), the internal temperature of the product trips a protective

device which deactivates the product to avoid product damage.

When the dehumidifier is operating, the indoor temperature will rise.

- The dehumidifier does not have a cooling/heating function.

- Heat is generated during operation, so the room temperature may be increased by about 5 °F

(3 °C) depending on the usage conditions (indoor temperature, size of the room).

The compressor has a 3-minute delay before restarting.

- If the product is stopped and immediately restarted, to protect the compressor there is a 3-

minute delay until the compressor restarts.

The product cannot be operated continuously for more than 23 hours.

After 23 hours of continuous operation, the compressor automatically shuts off for one hour to

prevent product damage. The compressor will restart after one hour. This Safety Standby function

is normal.

Install the product at least 11 13/ 16" (30 cm) from walls or other obstacles.

The product needs clearance for air intake and exhaust purposes.

There may be water in the drain water bucket before first use.

Water may remain in the drain water bucket from the product's outgoing inspection to check

operation. This is normal.

8

OPERATION

ENGLISH

OPERATION

Control Panel and Display

1 Safety Standby light (red)

After 23 hours of continuous operation, the red lamp lights

up for 1 hour.

2 Power button Starts and stops the product.

3 Fan Speed control button

Adjusts the fan speed and air volume.

Wi-Fi - To turn the Wi-Fi function on, press and hold the

button for 3 seconds.

※ To turn the Wi-Fi function off, press and hold the Power

button and the Fan Speed control button at the same

time for 3 seconds.

4 Fan Speed indicator lights Light up to indicate fan speed (High/Low).

5 Humidity display

Displays the current humidity (25-90 %) and the humidity

setting (30-80 %).

6 Humidity control button

Adjusts the humidity setting. Desired humidity levels can

be set in 5-percent increments from 30-80 %.

7 Timer button

Sets a time for the product to automatically turn off.

Press the button repeatedly to increase the time until

shutoff in 1-hour increments up to 12 hours.

Filter Reset - After cleaning the filter, press for 3 seconds

to reset operating time.

8 Pump button

Press and hold until the Pump Standby LED lights up to

turn the pump on in standby mode. Press again to turn the

pump off. When the water bucket is full, if the pump is in

standby mode it will automatically turn on and remove the

collected water using the included pump hose.

9 Auto Defrost light Lights up when the product is defrosting.

10 Bucket Full light Lights up when drain water bucket is full.

11 Check Filter light

Lights up after 350 hours of operation. Check and clean

the filter.

12 Timer On light Lights up when the Timer function is set.

13 Pump Standby light Lights up when the pump function is turned on.

14 Wi-Fi On light Lights up when the Wi-Fi function is connected.

15 Timer Function light Lights up when the Timer function is set in the app.

1 9 10 1341114

2515678123

OPERATION

9

ENGLISH

Dehumidifying

1 Press to turn on the power.

- It takes 30 minutes of continuous

operation to reach the desired humidity

level the first time the product is used.

- The display shows the current humidity

level.

2 Press / to change humidity.

- The desired humidity level can be set in

5-percent increments from 30-80 %.

- The display shows the desired humidity

level while it is being set, then reverts to

the current humidity level after 5 seconds.

- The current humidity level is displayed in

5-percent increments from 25-90 %.

If the humidity level is outside the range,

the display continues to show either 25 %

or 90 %.

3 Press to change the fan speed.

The fan speed has two levels: low or high.

4 Press to turn off the product.

Setting the Timer

The Timer function turns the product off

automatically after a set time.

1 Empty the drain water bucket. Press to

turn on the power.

2 Press to set the automatic shut off

time.

- Press the button repeatedly to increase

the time until shut off in 1-hour

increments up to 12 hours.

3 Press to cancel the Timer function.

- Press the Timer button repeatedly until

the Timer On light turns off.

Timer function

Various kinds of reservation including the

power on/off can be made by the LG

SmartThinQ application. (Execute SmartThinQ

Application → Select the dehumidifier product

→ Make reservation)

- For more detailed description on the use of

LG SmartThinQ, refer to the Using the Smart

Functions section.

- You can set the timer time through app.

- You can set the timer function only through

LG SmartThinQ app.

NOTE

!

• If the product is restarted immediately

after being shut down, to protect the

compressor there is a 3-minute delay

until the compressor begins operating.

• It is normal for the compressor to cause

the product to vibrate while starting or

stopping.

NOTE

!

Empty the drain water bucket before

setting the Timer function.

If the water bucket becomes full during the

Timer function, the Bucket Full light goes

on and dehumidification stops.

The Timer Function icon lights up

when the Timer function is set

through the app.

10

OPERATION

ENGLISH

Safety Standby Light

- After 23 hours of continuous operation, the

red Safety Standby light turns on for one

hour and the fan and compressor shut off to

prevent product malfunction.

- After an hour with the fan and compressor

shut off, the Safety Standby light turns off

and the fan and compressor automatically

restart.

Bucket Full Light

- Empty the water bucket within three minutes

of the Bucket Full light turning on.

- After the light turns on, the fan operates for

an additional three minutes to remove

remaining condensed water and then the

product shuts off.

- See Emptying the Water Bucket for further

instructions.

Checking the Filter

Check and clean the filter when the Check

Filter light turns on.

1 After 350 hours of operation, the Check

Filter light turns on. Check the filter and

clean it if necessary or wait 24 hours for

the light to go off automatically.

2 After cleaning the filter, press and hold

for three seconds to reset the operating

time.

Auto Defrost Light

The Auto Defrost function automatically

removes any frost in the heat exchanger

caused by low indoor temperatures.

- The Auto Defrost light turns on while the

product automatically defrosts the heat

exchanger.

- The compressor stops during the automatic

defrost function.

Continuous Drainage Setup

Items Needed:

3/4" (outer diameter) threaded garden hose

nearby sink or drain.

1 Unplug the product. Turn the hose cover at

the back of the product counterclockwise to

open it.

2 Remove the water bucket.

3 Insert the drainage adapter into the

opening for the hose and turn it clockwise.

Insert the provided screw to secure it in

place.

4 Turn the end of the garden hose clockwise

to attach it to the drainage adapter.

- Firmly attach the garden hose to avoid

leaks. Hand tighten; then make an

additional 1/8 turn with pliers.

OPERATION

11

ENGLISH

5 Reinstall the water bucket.

Emptying the Water Bucket

1 Gently pull the top handle of the water

bucket to remove the bucket from the

product.

2 Lift off the cover of the water bucket.

3 Pour the water out of the bucket.

4 Put the cover back on the water bucket.

5 Angle the bottom of the water bucket into

place first, then push the top into place.

NOTE

!

• The product does not work without the

water bucket installed.

• Place the end of the garden hose in a

nearby sink or drain. Secure the hose in

place to prevent it from falling out of the

sink.

• When removing the garden hose, hold a

cloth or container under the end of the

drainage adapter to catch any water.

Take care not to injure hands while

connecting drainage hose.

CAUTION

!

Cover

Water bucket

handle

Water bucket

handle

Cover

Water bucket

handle

12

OPERATION

ENGLISH

2 Insert the adapter on one end of the

included long pump hose into the pump

hose connector until it stops. Gently tug on

the hose to make sure the hose is secure.

3 Place the end of the long pump hose in a

nearby sink or drain. Secure the hose in

place to prevent it from falling out of the

sink.

Watch pinch points to avoid injuring

fingers when installing the water bucket.

CAUTION

!

NOTE

!

• If the water bucket is removed

immediately after turning off the

dehumidifier, the water remaining in the

heat exchanger may drip inside the water

bucket storage area. Remove the water

with a soft cloth.

• While cleaning, do not touch the water

detection device on the inside top of the

water bucket storage area.

• Clean the water bucket once a week

during use.

• If the ambient temperature is low, there is

less moisture in the air for the product to

remove.

• Unplug the product before removing the

water bucket. If the bucket is removed

while the product is operating, the

compressor stops. The fan operates for

another three minutes to clear the

remaining water inside the heat

exchanger and then also stops.

Push hose in

!

Using the Pump

The pump function provides continuous

drainage which can be enabled from the

control panel.

1 Unplug the product. Turn the hose cover at

the back of the product counterclockwise to

open it and reveal the pump hose

connector.

OPERATION

13

ENGLISH

4 Remove the water bucket. Connect the

short pump hose (provided) to the

connector at the back of the water bucket

storage area. Insert the hose until it stops

and tug gently to make sure it is secure.

5 Reinstall the water bucket, sliding the end

of the short pump hose through the square

opening in the cover.

6 To activate the pump, press the Pump

button for 3 seconds. Confirm that the

Pump Standby light is on. The pump will

start automatically once the water bucket is

full. The pump will continue to operate if

the water bucket is removed.

7 To remove either the short or long pump

hose, use your index finger and thumb to

push the inner white ring in at the base of

the hose connector while sliding the hose

out. If you're pressing the correct ring, you

should feel some give in the hose.

• Do not install the end of the pump hose

higher than 16 1/4 ft. (5 m). Doing so

could result in leaks or product damage.

• The dehumidifier will go into standby

mode after about 3 minutes if the water

bucket is removed but the pump will

continue to function. To avoid damaging

the pump, turn off the appliance before

removing the water bucket.

• Do not operate the pump without the

pump hoses and water bucket in place.

• Do not operate with the filter disconnected

from the short pump hose.

CAUTION

!

Pull hose out

Press white ring in

White ring

NOTE

!

• Check that the pump hose is connected

correctly and that it is not twisted, bent or

cracked as that may allow water to

escape.

• Do not use a bent or crimped hose as

water flow may be blocked.

• A replacement water hose can be

purchased online at www.lg.com or

contact an authorized dealer for

assistance.

• To avoid leaks, do not use the drainage

adapter when the pump hose is inserted.

• Some residual water may leak out when

the hoses are removed.

• The pump only operates when the water

bucket is full.

• The pump will not drain the water bucket

completely dry. To avoid odor, clean the

water bucket at least once a week.

• Turn the appliance off before removing

the bucket for cleaning.

14

MAINTENANCE

ENGLISH

MAINTENANCE

Cleaning the Exterior

Wipe the exterior of the dehumidifier with a

soft, damp cloth.

- Do not spray water directly on the product.

Doing so may cause damage to the

insulation or stains on the surface of the

product.

Use a vacuum cleaner or soft brush to remove

dust from the filter case.

Cleaning the Water Bucket

1 Lift off the cover of the water bucket.

2 Empty the water bucket and use a soft

cloth to remove any remaining moisture

inside it. Reassemble the cover before

using.

Do not use materials such as thinners,

benzene, acid, or sponges to clean the

product. They may damage the surface of

the product.

CAUTION

!

Operating the product with the cover of the

water bucket missing or assembled

improperly may result in leaking.

CAUTION

!

Soft cloth

MAINTENANCE

15

ENGLISH

Cleaning the Air Filter

1 Release the two hooks at the right of the

filter case and swing it open to remove it.

2 Pull the center tab on the air filter to

remove it from the filter case.

3 Clean the air filter with a vacuum cleaner or

soft brush.

- If the filter is very dirty, wash it in water

and a neutral detergent.

- Clean the air filter once a month.

4 Bend the sides of the air filter inward

slightly to reinsert it. Make sure the filter is

seated under the tabs inside the filter case.

5 Align the hinges on the filter case with the

hinge openings on the product and then

swing the case to the right to reattach the

two hooks.

• Unplug the unit before cleaning it.

• Allow the filter to dry completely, out of

direct sunlight, before reinserting it in the

product. Operating the product with a

damp filter may cause product failure.

CAUTION

!

NOTE

!

Service calls to clean the air filter are not

covered under the product warranty.

16

MAINTENANCE

ENGLISH

Cleaning the Pump Filter

1 Remove the filter from the short pump

2 Clean the filter with a soft brush or wash

3 Assemble the filter and the short pump

hose.

it in water and a neutral detergent. Clean

the air filter once a month.

Storing the Product

1 Unplug the product.

2 Empty the water bucket completely.

- Remove the lid from the water bucket and

use a soft cloth to wipe up any remaining

water in the bucket.

3 Clean the filter.

- Let the filter thoroughly dry for several

hours in a shaded, well-ventilated area

before reinstalling it.

- Placing the filter in direct sunlight or near

a fire may cause product deformation.

4 Disconnect the drainage hose and adapter

or pump hose (if connected).

5 While the filter is drying, place the

dehumidifier out of direct sunlight in a

well-ventilated area and allow it to

thoroughly dry for several hours. Reinstall

the filter and cover the dehumidifier before

storing it in an upright position.

(A dust cover for storing the dehumidifier is

not included.)

SMART FUNCTIONS

17

ENGLISH

SMART FUNCTIONS

Using LG SmartThinQ

Application

The LG SmartThinQ application allows you to

communicate with the appliance using a

smartphone.

Before Using LG

SmartThinQ

1 Check the distance between the appliance

and the wireless router (Wi-Fi network).

• If the appliance is too far from the

wireless router, the signal strength

becomes weak. It may take a long time to

register or installation may fail.

2 Turn off the Mobile data or Cellular Data on

your smartphone.

• For iPhones, turn data off by going to

Settings → Cellular → Cellular Data.

3 Connect your smartphone to the wireless

router.

NOTE

!

• To verify the Wi-Fi connection, check that

Wi-Fi icon on the control panel is lit.

• The appliance supports 2.4 GHz Wi-Fi

networks only. To check your network

frequency, contact your Internet service

provider or refer to your wireless router

manual.

• LG SmartThinQ is not responsible for

any network connection problems or any

faults, malfunctions, or errors caused by

network connection.

• If the appliance is having trouble

connecting to the Wi-Fi network, it may

be too far from the router. Purchase a

Wi-Fi repeater (range extender) to

improve the Wi-Fi signal strength.

• The Wi-Fi connection may not connect or

may be interrupted because of the home

network environment.

• The network connection may not work

properly depending on the Internet

service provider.

• The surrounding wireless environment

can make the wireless network service

run slowly.

• If the appliance cannot be registered due

to problems with the wireless signal

transmission, unplug the appliance and

wait about a minute before trying again.

• If the firewall on your wireless router is

enabled, disable the firewall or add an

exception to it.

• The wireless network name (SSID)

should be a combination of English

letters and numbers. (Do not use special

characters.)

• Smartphone user interface (UI) may vary

depending on the mobile operating

system (OS) and the manufacturer.

• For best results, set the security protocol

on the router to WPA2. If the WEP

protocol is used, the product may fail to

register on the network.

• Connect only to wireless networks you

are authorized to use. Unauthorized

Wi-Fi connections are illegal, and may

subject you to legal action.

18

SMART FUNCTIONS

ENGLISH

Installing LG SmartThinQ

Search for the LG SmartThinQ application

from the Google Play Store or Apple App

Store on a smart phone. Follow instructions to

download and install the application.

Registering the Product Via

Wi-Fi

1 Press button to start dehumidifier

operation.

2 Check the information (Wi-Fi network

name, password) of AP at the place where

the dehumidifier is installed.

3 Install the LG SmartThinQ app on a

smartphone and register the product in the

app.

• To connect to Wi-Fi, follow the guide in

the app and press and hold the Fan

Speed button until the Wi-Fi icon starts

blinking. (For detailed instructions, see

the connection guide in the LG

SmartThinQ app.)

* Make sure the Wi-Fi icon on the product

display is blinking. The icon will blink for 5 to

10 minutes while the network information is

being sent.

Wi-Fi Function

Smart Diagnosis™

Troubleshoot problems with the product using

the Smart Diagnosis™ function in the

application.

Settings

Use the Settings feature to manage product or

application settings.

Wireless LAN Module

Specifications

Wireless function S/W version: V 1.0

For consideration of the user, this device

should be installed and operated with a

minimum distance of 20 cm between the

device and the body.

NOTE

!

• If you change your wireless router,

Internet service provider, or password,

delete the registered appliance from the

LG SmartThinQ application and register

it again.

• The application is subject to change for

appliance improvement purposes without

notice to users.

• Functions may vary by model.

Model LCW-003

Frequency

Range

2412 - 2462 MHz

Output

Power

(Max)

IEEE 802.11b: 17.56 dBm

IEEE 802.11g: 25.53 dBm

IEEE 802.11n: 25.29 dBm

• If the dehumidifier is too far from your

wireless router, the Wi-Fi functions may

not work properly.

• If the Wi-Fi connection is not stable, you

may be unable to connect to the product

and use features through the LG

SmartThinQ app.

CAUTION

!

SMART FUNCTIONS

19

ENGLISH

FCC Notice (For transmitter

module contained in this product)

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the

equipment and the receiver.

- Connect the equipment to an outlet on a

circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced

radio/TV technician for help.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful

interference and

(2) this device must accept any interference

received, including interference that may

cause undesired operation of the device.

Any changes or modifications in construction

of this device which are not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

FCC RF Radiation Exposure

Statement

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be

co-located or operating in conjunction with any

other antenna or transmitter.

This equipment should be installed and

operated with a minimum distance of 20 cm

(7.8 inches) between the antenna and your

body. Users must follow the specific operating

instructions for satisfying RF exposure

compliance.

Industry Canada Statement (For

transmitter module contained in

this product)

This device contains licence-exempt

transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic

Development Canada’s licence-exempt

RSS(s). Operation is subject to the following

two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference,

including interference that may cause

undesired operation of the device.

IC Radiation Exposure Statement

This equipment complies with IC radiation

exposure limits set forth for an uncontrolled

environment. This equipment should be

installed and operated with a minimum

distance of20 cm (7.8 inches) between the

antenna and your body.

20

SMART FUNCTIONS

ENGLISH

Using Smart Diagnosis™

• For appliances with the logo.

Smart Diagnosis™ Through

the Customer Information

Center

Troubleshoot product issues with the

assistance of the LG Electronics Customer

Information Center. Only use this function

when directed to do so by the call center

agent.

Smart Diagnosis™ cannot be used unless the

product is connected to power.

1 Open the LG SmartThinQ application on

the smartphone.

2 Select the Dehumidifier in dashboard.

3 Press Start Smart Diagnosis™ button.

4 Follow the instructions on the smartphone.

NOTE

!

• The Smart Diagnosis™ function depends

on the local call quality.

• The communication performance will

improve and you may get more accurate

results if you use a landline phone.

• Poor call quality may interfere with an

accurate diagnosis.

NOTE: THE MANUFACTURER IS NOT

RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY

UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS

COULD VOID THE USER’S AUTHORITY TO

OPERATE THE EQUIPMENT.

Open Source Software

Notice Information

To obtain the source code under GPL, LGPL,

MPL, and other open source licenses, that is

contained in this product, please visit

http://opensource.lge.com.

In addition to the source code, all referred

license terms, warranty disclaimers and

copyright notices are available for download.

LG Electronics will also provide open source

code to you on CD-ROM for a charge covering

the cost of performing such distribution (such

as the cost of media, shipping, and handling)

upon email request to [email protected].

This offer is valid for a period of three years

after our last shipment of this product. This

offer is valid to anyone in receipt of this

information.

La page est en cours de chargement...

LG UD501KOJ5 Manuel utilisateur

Ce manuel convient également à

LG UD501KOJ5 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents