Haier HL42XD1a Le manuel du propriétaire

R

TFT-LCD TV

OWNER'S MANUAL

Please READ this manual carefully before

operating your TV, and retain it for future

reference.

MODELS :

HL32D1

HL42XD1

Warning

CAUTION

RISK ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

7KHOLJKWQLQJÀDVKZLWKDUURZKHDGV\PEROZLWKLQDQ

equilateral triangle is intended to alert the user to the

SUHVHQFHRIXQLQVXODWHGGDQJHURXVYROWDJHZLWKLQWKH

SURGXFW¶VHQFORVXUHWKDWPD\EHRIVXI¿FLHQWPDJQLWXGH

to constitute a risk of electric shock.

7KHH[FODPDWLRQSRLQWZLWKLQDQHTXLODWHUDOWULDQJOHLV

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the

risk of electric shock, do not perform any servicing other than that contained in the operating instructions

unless you are qualified to do so.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

+HHGDOOZDUQLQJV

)ROORZDOOLQVWUXFWLRQV

'RQRWXVHWKLVDSSDUDWXVQHDUZDWHU

&OHDQRQO\ZLWKGU\FORWK

'RQRWEORFNDQ\YHQWLODWLRQRSHQLQJV,QVWDOOLQDFFRUGDQFHZLWKWKHPDQXIDFWXUHU¶VLQVWUXFWLRQV

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

'RQRWGHIHDWWKHVDIHW\SXUSRVHRIWKHSRODUL]HGRUJURXQGLQJW\SHSOXJ$ SRODUL]HGSOXJ KDVWZR EODGHVZLWK

RQHZLGHUWKDQWKHRWKHU$JURXQGLQJW\SHSOXJKDVWZREODGHVDQGDWKLUGJURXQGLQJSURQJ7KHZLGHEODGHRUWKH

third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

3URWHFWWKHSRZHUFRUGIURPEHLQJZDONHGRQRUSLQFKHGSDUWLFXODUO\DWSOXJVFRQYHQLHQFHUHFHSWDFOHVDQGWKH

SRLQWZKHUHWKH\H[LWIURPWKHDSSDUDWXV

11) Only use attachments/accessories specified by the manufacturer.

8VHRQO\ZLWKWKHFDUWVWDQGWULSRGEUDFNHWRUWDEOHVSHFLILHGE\WKHPDQXIDFWXUHU

RUVROGZLWKWKHDSSDUDWXV:KHQDFDUWLVXVHGXVHFDXWLRQZKHQPRYLQJWKHFDUW

Apparatus combination to avoid injury from tip-over.

8QSOXJWKLVDSSDUDWXVGXULQJOLJKWQLQJVWRUPVRUZKHQXQXVHGIRUORQJSHULRGVRIWLPH

5HIHUDOOVHUYLFLQJWRTXDOLILHGVHUYLFHSHUVRQQHO6HUYLFLQJLVUHTXLUHGZKHQWKHDSSDUDWXVKDVEHHQGDPDJHG

LQDQ\ZD\VXFK DVSRZHUVXSSO\FRUGRUSOXJLVGDPDJHGOLTXLGKDVEHHQVSLOOHGRUREMHFWVKDYHIDOOHQLQWRWKH

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

7KHDSSDUDWXVVKDOOQRWEHH[SRVHGWRGULSSLQJRUVSODVKLQJDQGWKDWQRREMHFWVILOOHGZLWKOLTXLGVVXFKDVYDVHV

shall be placed on the apparatus.

16)The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the

apparatus normal use.

&ODVV,DSSDUDWXVVKDOOEHFRQQHFWHGWRDPDLQVVRFNHWRXWOHWZLWKDSURWHFWLYHHDUWKLQJFRQQHFWLRQ

2ZQHUV0DQXDO

Safety Instructions

FCC STATEMENT

7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUD&ODVV%GLJLWDOGHYLFHSXUVXDQWWR3DUWRIWKH

FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in

DFFRUGDQFHZLWKWKHLQVWUXFWLRQVPD\FDXVHKDUPIXOLQWHUIHUHQFHWRUDGLRFRPPXQLFDWLRQV+RZHYHUWKHUHLVQR

JXDUDQWHHWKDWLQWHUIHUHQFHZLOOQRWRFFXULQSDUWLFXODULQVWDOODWLRQ,IWKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFH

WRUDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGRQWKHXVHULVHQFRXUDJHWR

WU\WRFRUUHFWWKHLQWHUIHUHQFHE\RQHRUPRUHRIWKHIROORZLQJPHDVXUHV

*Reorient or relocate the receiving antenna.

,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU

&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFKWKHUHFHLYHULVFRQQHFWHG

*Consult the dealer or an experienced radio/TV technician for help.

7KLVGHYLFHFRPSLOHVZLWK3DUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQV

(1) This device may be not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause undesired

operation.

FCC CAUTION:

To assure continued compliance and possible undesirable interference, the provided ferrite cores must be

XVHGZKHQFRQQHFWLQJWKLV/&'GLVSOD\WRYLGHRHTXLSPHQWDQGPDLQWDLQDWOHDVWFPVSDFLQJWRRWKHU

peripheral device.

CANADIAN NOTICE:

7KLV&ODVV%GLJLWDODSSDUDWXVFRPSLOHVZLWK&DQDGLDQ,&(6

Energy Star compliant(models - HL32D1,HL42XD1)

By being Energy Star compliant you are assured that your Haier model is helping the environment by using less

HQHUJ\ZKLOHVDYLQJ\RXPRQH\(1(5*<67$5LVDMRLQWSURJUDPRIWKH86(QYLURQPHQWDO3URWHFWLRQ$JHQF\DQG

WKH86'HSDUWPHQWRI(QHUJ\SURPRWLQJHQHUJ\HI¿FLHQF\

4 TV LCD-TFT

Safety Instructions

SAVE THESE INSTRUCTIONS

7KDQN\RXIRUSXUFKDVLQJWKH+DLHUSURGXFW7KLVHDV\WRXVHPDQXDOZLOOJXLGH\RXLQJHWWLQJWKHEHVWXVHRI\RXU

product. Remember to record the model and serial number. They are on label in back of the unit.

Model number

serial number

Date of purchase

Staple your receipt to your manual. You will need it to obtain warranty service.

hsilgnE

TABLE OF CONTENT

DIGITAL TELEVISION TRANSITION NOTICE .......................................

1

PRECAUTIONS AND REMINDERS ...........................................................

2

IMPORTANT SAFETY INSTRUCTIONS ...................................................

3

PREPARATION.................................................................................................

5

PREPARING YOUR LCD HDTV FOR WALL MOUNTING ..........................................5

PERIPHERAL CONNECTION GUIDE ......................................................

7

OPERATING INSTRUCTIONS....................................................................

8

TO USE THE FRONT PANEL CONTROL.........................................................................8

TO USE THE REMOTE CONTROL.....................................................................................9

TO USE THE MENUS ........................................................................................................... 10

CHANNEL MENU ................................................................................................................ 10

VIDEO MENU ........................................................................................................................ 10

AUDIO MENU....................................................................................................................... 11

FEATURE MENU....................................................................................................................11

VGA MENU............................................................................................................................. 13

TIPS ........................................................................................................................................... 14

PRODUCT SPECIFICATION.......................................................................

15

BEFORE CALLING SERVICE.......................................................................

17

GLOSSARY.......................................................................................................

18

WARRANTY.....................................................................................................

20

1 TV LCD-TFT

hsilgnE

DIGITAL TELEVISION TRANSITION NOTICE

This device contains a digital television tuner, so it should receive digital over the air TV programming,

with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June

12 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to

receive over the air digital programming, but should continue to work as before for other purposes (e.g.,

for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing

video games).

For more information,

call the FCC at 1-888-CALL-FCC (1-888-225-5322)

or see www.DTV.gov.

For information on the TV Converter program, and on government coupons that may be used toward

the purchase of one, see www.dtv2009.gov,

or call the NTIA at 1-888-DTV-2009

.

AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN DIGITAL

Este equipo incorpora un sintonizador de televisión digital, lo que le permitirá recibir una programación

digital televisada por aire, con una antena adecuada, cuando se terminará la transmisión de alta potencia

de la televisión analógica en los Estados Unidos el 12 de Junio de 2009. Ciertos receptores de televisión

antiguos, si dependen de una antena de TV, necesitarán un conversor de TV para recibir por el aire una

programación digital, pero seguirán funcionando como antes para otros usos (por ejemplo para ver

emisoras de TV de baja potencia que todavía transmiten en analógico, para ver películas pregrabadas, o

para utilizar sus videojuegos).

Para obtener más información,

llame FCC 1-888-CALL-FCC (1-888-225-5322)

o refiérase a www.DTV.gov.

Para toda información sobre el programa de conversores de TV, y acerca de los cupones del gobierno

que se pueden usar para comprarlos, refiérase a www.dtv2009.gov,

o llame al NTIA al 1-888-DTV-2009

SYMBOL SYMBOL DEFINITION

SA 1965

DANGEROUS VOLTAGE: The lightning flash with arrowhead

symbol, within an equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of

electrical shock to persons.

SA 1966

INSTRUCTIONS: The exclamation point within on

equilateral triangle to alert the user to the presence of

important operating and maintenance (servicing)

instruction in the literature accompanying the appliance.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, Such as

vases, shall be placed on the apparatus.

Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

Batteries installed warning

Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as

sunshine, fire or the like.

2ZQHUV0DQXDO

hsilgnE

PRECAUTIONS AND REMINDERS

Place unit on even surfaces.

Unplug immediately if is

malfunction like no picture,

no video/audio,smoke and

bad odor from TV.

Don't throw any object

inside the TV box like

metals or other flammable

materials.

Don't place the TV in

confined spaces or in a box

when using it.

Unplug immediately if other

foreign materials are put

inside TV box or if the TV

fell down.

Prohibit/Avoid opening TV

cabinet.

Remember to unplug the

AC cord from the AC outlet

before cleaning. Do not use

liquid cleaners or aerosol

cleaners to clean the display.

Make sure to unplug the

unit when not in use for a

long period of time (days).

Do not cover or block

any vents and openings.

Inadequate ventilation

may shorten the life of

the display unit and cause

overheating.

Avoid direct sunlight, dusty,

high humidity and smoky

areas

.

Call service personnel to

clean the internal part of

the TV once a year.

Do not place the display

near water, such as bathtub,

washbasin, kitchen sink

laundry tub, swimming pool

or in a damp basement.

Notice for Remote Controller

Avoid Dropping

1

2

3

4

5

6

7

8

9

0

Avoid Liquids

1

2

3

4

5

6

7

8

9

0

Avoid Aerosol Cleaners

1

2

3

4

5

6

7

8

9

0

3 TV LCD-TFT

hsilgnE

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturers

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and third grounding

prong. The wide blade or third prong is provided for your safety. When the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

15. The TV should be operated only from the type of power source indicated on the label. If you are not

sure of the type of power supplied to your home, consult your dealer or local power company.

16. Class I Protective Earthing Connection – "The Class I apparatus shall be connected to a mains socket

outlet with a protective earthing connection."

17. Disconnect Device - Mains Plug or Appliance Coupler – "The mains plug or appliance coupler is

used as the disconnect device, the disconnect device shall remain readily operable."

18. Disconnect Device - An all-pole MAINS SWITCH – "An all-pole MAINS SWITCH is used as the

disconnect device, the switch shall remain readily operable."

19. Service Instructions – "CAUTION – These servicing instructions are for use by qualified service

personnel only. To reduce the risk of electric shock, do not perform any servicing other than that

contained in the operating instructions unless you are qualified to do so."

20. Wall Mount Bracket Wording – "For use only with UL Listed Wall Mount Bracket with minimum

weight/load: Please see page.15"

21. Information about the DTV transition –after June 12,2009, a television receiver with only an analog

broadcast tuner will require a converter box to receive full power over-the- air broadcasts with an

antenna because of the Nation's transition to digital broadcasting. Analog-only TVs should continue

to work as before to receiver low power, Class A or translator television stations and with cable

and satellite TV services, gaming consoles, VCRs, DVD players, and similar products. For more

information about the DTV transition is available from http://www.DTV.gov or 1-888-CALL-FCC,

and from http://www.dtv2009.cov or 1-888-DTV-2009 for information about subsidized coupons for

2ZQHUV0DQXDO

hsilgnE

digital-to-analog converter boxes.

CONSUMER ALERT – This television receiver has only an analog broadcast tuner and will require a

converter box after June 12,2009,to receive over-the-air broadcasts with an antenna because of the

Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before with

cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products, For more

information, call the Federal Communications Commission at 1-888-225-5322(TTY:1-888-835-5322)

or visit the Commission's digital television website at:www.DTV.gov.

22. Tilt/Stability – All televisions must comply with recommended international global safety standards

for tilt and stability properties of its cabinets design.

Ɣ

Do not compromise these design standards by applying excessive pull force to the front, or top,

of the cabinet, which could ultimately overturn the product

Ɣ

Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top

of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product

damage and/or personal injury.

23. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as

recommended by the manufacturer.

24. Power Lines – An outdoor antenna should be located away from power lines.

25. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the

antenna system is grounded so as to provide some protection against voltage surges and built

up static charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides

information with respect to proper grounding of the mats and supporting structure grounding of the

lead-in wire to an antenna-discharge unit, size of grounding connectors, location of antennadischarge

unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure

below.

ANTENNA

ANTENNA DISCHARGE UNIT

GROUNDING CONDUCTORS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the

CATV system installer: This reminder is provided to call the CATV system installer’s attention to

Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies

that the cable ground shall be connected to the 6 English grounding system of the building, as close

to the point of cable entry as practical. Please, make sure to connect the power plug to the wall

outlet socket after connecting the TV to the adapter!

26. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,such as

vases, shall be placed on the apparatus.

5 TV LCD-TFT

hsilgnE

PREPARATION

IMPORTANT: Do not apply pressure to the screen display area which may compromise the

integrity of the display. The manufacturer’s warranty does not cover user abuse or improper

installations.

PREPARING YOUR LCD HDTV FOR WALL MOUNTING

We suggest that you keep your TV at least 2.36 inches (6.0 cm) from the wall to prevent cable

interference.

Before mounting your TV on the wall, you need to remove the base.

For your safety, please use only with UL listed wall mount bracket with minimum weight of the

TV without stand. (Please see page.15.)

To attach a wall mount bracket to your TV:

1 Loosen the screws on the back of the stand and remove the back cover of the stand.

2 Pull up the stand base from the hinge to remove the stand base from your TV.

3 Secure the wall mount bracket to the back of your TV using four M6 screws, as indicated

in the illustration.

32" 42"

200 mm

400 mm

200 mm

NOTE

fFP[FPLQFK[LQFKZDOOPRXQWEUDFNHW0VFUHZVDUHQRWLQFOXGHG

fFP[FPLQFK[LQFKZDOOPRXQWEUDFNHW0VFUHZVDUHQRWLQFOXGHG

f $IWHU WDNLQJ WKH EDVH DSDUW XVHUV PXVW DWWDFK WKH WZR VFUHZ ORFNHUV PDUNHG WKH SLFWXUH WR

PDFKLQHLQRUGHUWRSUHYHQWJDSDIWHUKDQJLQJRQWKHZDOO

2ZQHUV0DQXDO

hsilgnE

3. Remote control:

Remove the cover of the battery

compartment. Insert the 2 batteries

supplied (Type AAA 1.5V).

4. Power:

Insert the power cord in the wall socket

with AC power supply. You can see LED

states at the front panel. If the LED color

is

Blue

, means the TV set is power on. If

the LED color is Red, which means this TV

set is in standby state.

5. Turn the TV on:

Press the POWER key on the Remote

control or the side panel control knobs.

The TV will be turned on in a minute with

display on the screen.

Power

Video

Comp PC/HDMI TV

Power Key

Please make sure to connect the power plug

to the wall outlet socket after connecting the

TV to the power cord!

1. Install the base stand; place the TV

on a solid surface.

Min

1 m

Ensure that the TV is placed in a position

to allow free flow of air. Do not cover the

ventilation openings on the back cover.

To prevent any unsafe situations, no naked

flame sources, such as lighted candles,

should be placed on or in the vicinity.

Avoid heat, direct sunlight and exposure

to rain or water. The equipment shall not

be exposed to dripping or splashing.

2. Connect the antenna cable or CATV cable

to the aerial socket ANT IN 75

:

at the

back of the TV set.

32"

42"

7 TV LCD-TFT

hsilgnE

PERIPHERAL CONNECTION GUIDE

32" 42"

NICP

PC IN

3 4 SERVICE

PORT

AC POWER

1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or

set top box through this all digital connector. The white color band on the rear of the TV

indicates this connection.

2. PC IN – Connect the video and audio cables from a computer here.

3. AV IN (AV/S-VIDEO) – Connect the primary source for composite video devices, such as

a VCR or video game. Use the white and red connectors to connect the external audio from

the same source. The signal being carried by the S-Video cable and connector, if connected,

will take priority over the Video RCA connector (yellow connector).

4. COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the primary source for

component video devices such as a DVD Player or set top box here. From left to right, use

red for Pr, blue for Pb, green for Y, red for right audio (R) and white for left audio (L) inputs.

5. ANTENNA/CABLE DIGITAL/ANALOG – Connect to an antenna or digital cable (out-

of-the-wall, not from Cable Box) for Digital TV.*

6. SPDIF (Optical Digital Audio Out) – When a digital audio signal is associated with the

input selected for viewing, the digital audio will be available on this SPDIF connection to

your home theater system.

7. AUDIO OUT – Connect an external sound system with standard audio cable to the

AUDIO OUT L and R jacks on the back of your TV and to the AUDIO IN jacks on the

amplifier.

Once your equipment is connected, use the following procedure to view the input signal:

Press the source button on the remote controller to select the relevant source to view. (ex: Press

COMP button to select “Component” if you have connected a video recorder to Component socket.)

2ZQHUV0DQXDO

hsilgnE

OPERATING INSTRUCTIONS

TO USE THE FRONT PANEL CONTROL

1

2

3

5

6

4

7

SOURCE

1 VOL + VOL +: Press to increase the sound volume level.

2. VOL - VOL - : Press to decrease the sound volume level.

3. CH

Ÿ

CH +: Press to select the next higher Program number.

4. CH

ź

CH - : Press to select the next lower Program number.

5. MENU Menu key: Press to open or exit the OSD (on-screen display) menu.

6. SOURCE Source key: Press to select the input source.

7.

i

Power key: Press to turn on / off (standby) the TV set. (Press to turn on

TV after the power on status, LED had changed to the

Blue

color and

stopped flashing.)

9 TV LCD-TFT

hsilgnE

TO USE THE REMOTE CONTROL

Power

Press to turn ON/OFF (standby)

TV.(Note:1.TV is never

completely powered off. unless

physically unplugged. 2.Press

to turn on TV after the power

on status, LED had changed

to the blue color and stopped

flashing.)

Video

Press repeatedly to choose

AV1/AV2 source mode.

Comp

Press repeatedly to choose

Component 1/Component 2

source mode.

PC/HDMI

Press repeatedly to choose VGA

or HDMI source mode (HDMI1,

HDMI2,HDMI3).

TV

Press to choose ATSC/NTSC

TV source mode.

0 ~ 9 /- number

Press to enter TV channel

number to select channel (Press

‘-’ to choose the sub-channel).

Sleep

Press to set a time period (off/5

min /10 min /15 min /30min/45

min /60min/90min/120 min

/180 min /240 min)after which

the TV should switch itself to

standby mode.

Freeze

Press to freeze the displayed

picture.

CH-/ CH +

Press + or - to browse through

the TV channels.

Menu

Press to open or exit menu.

“<”,“>”,“

<

”,“

>

”,“ENTER

Press to adjust the various

function items on the menu.

PREV CH

Press to display the previous

channel

MTS/SAP

Press to activate the NTSC TV

sounds, such as: Stereo, SAP or

Mono tone, and languages of

DTV.

Press to choose the display

aspect as: Normal, Wide or

Zoom.

Source

Press repeatedly to choose the

various input sources.

EPG

This function is not supported.

Mute

Switch the sound ON/OFF

Info

Press to show the information

about the input source,TV

channel,display resolution and

current time.

VOL- / VOL+

Press + or - to adjust the

volume.

Exit

Press to exit menu or OSD.

V-Chip

Press to lock / unlock Parental

Control temporarily. (After

setting the restricted table of

MPAA or TV Rating.)

Video Adj

Press to choose the Picture

Mode from Vivid/Standard/PWR/

Theater/Sport/Custom.

Audio Adj

Press to choose Standard/Movie/

News/Custom.

C.C.

Press repeatedly to change the

closed caption type as CC ON/

CC OFF/CC ON WITH MUTE.

Favorite

Press to toggle the Favorite/

Normal mode.

Power

Video

123

456

789

0

PREV CH

Comp PC/HDMI TV

Sleep

Fav Source

Mute

Menu Exit

ENTER

V-Chip

Video Adj Audio Adj

C.C.

Info

VOLCH

EPG

Freeze MTS/SAP

(Only 42” have HDMI 4).

2ZQHUV0DQXDO

hsilgnE

TO USE THE MENUS

1. Press the MENU/EXIT button to display

or close the main menu

2. Use the Navigation Ring to move around

to select, adjust or confirm an item in the

OSD (On Screen Display) menu.

Press the MENU/EXIT button to enter the

main OSD. Adjust the items including Video

menu, Audio menu, Feature menu,

Channel menu and VGA menu. However,

some function items in the menus may only be

enabled in the particular source modes.

CHANNEL MENU

The Channel menu in TV mode shows as

below.

Enter Exit

Channel

Video

Tuning Band

Channel Strength

Auto CH Search

Channels List

Add on CH Search

Channel Labels

FAV Channel Setting

Move Select Return Exit

Cable

Audio

Feature

Channel

VGA

1. Tuning Band: Select TV source signal

from the Air (antenna) or Cable (CATV).

2. Channel Strength: Show the intensity of

the received DTV signal.

3. Auto CH Search: Automatically scan

all NTSC / ATSC TV channels and then

store in the channel table. In channel scan

process, the OSD can display the number

of channels which had been found.

4. Add on CH search: Add channels which

are new found.

5. Channels List: Show the channel List.

User can edit (add/delete) the channel

numbers.

6. Channel Labels: Show the NTSC / ATSC

TV channel label menu for user modifying

channel labels specifically.

7. FAV Channel Setting: Show the Favorite

Channel List. User can edit (add/delete) the

favorite channels.

VIDEO MENU

The Video menu in most source modes shows

as below. It provides several video adjustment

items for user fine tuning the video display.

Only in VGA source mode, the Video menu

simply provides Picture Mode, Color Temp,

Backlight, Aspect Ratio and Preset items.

Enter Exit

Video

Picture Mode

Brightness

Contrast

Color

Sharpness

Tint

Color Temp

Move Select Return Exit

Vivid

62

+10

41

42

0

Cool

Audio

Feature

Channel

VGA

1. Picture Mode: Adjust the best picture

appearance from selecting the preset value

of Vivid, Standard, PWR, Theater, Sport, or

Custom.

2. Brightness: Video brightness adjustment,

the tuning range is 0 ~ 100.

3. Contrast: Video contrast adjustment, the

tuning range is 0 ~ 100.

4. Sharpness: Video sharpness adjustment,

the tuning range is 0 ~ 100.

5. Color: Video color chroma adjustment,

the tuning range is 0 ~ 100.

6. Tint: Video tint adjustment, the tuning

range is R50 ~ G50.

7. Color Temp: Three color temperature

modes. (Normal / Warm / Cool)

8. Backlight: Backlight strength adjustment,

the tuning range is 0 ~ 30.

9. Aspect Ratio: Choose the display aspect:

Standard/Fill/Overscan.

10. Preset: Restore the default video settings.

11 TV LCD-TFT

hsilgnE

AUDIO MENU

The Audio menu in TV mode shows as below.

It provides audio adjustment for user to modify

the audio setting. Audio language setting is only

available with ATSC TV source, the option is

disable under other source modes.

Enter Exit

Audio

Video

Sound Mode

Bass

Treble

Audio Source

Balance

30

0

SPDIF

Speaker

Move Select Return Exit

Movie

Mono

RAW

On

Audio

Feature

Channel

VGA

1. Sound Mode: Choose the sound mode:

Standard, Movie, News, or Custom.

2. Bass: Bass tone adjustment, the tuning

range is 0 ~ 63. (The default state is

enabled)

3. Treble: Treble tone adjustment, the tuning

range is 0 ~ 63. (The default state is

enabled)

4. Balance: Audio balance adjustment, the

tuning range is L50 ~ R50.

5. Audio Source: Select the audio source

from Mono, Stereo, or SAP. (This function

works in ATV only).

6. Audio Language: Change the audio

language setting on ATSC TV programs. The

number of the supported audio languages

depends on the ATSC TV programs. (English

/ Français / Español)

7. SPDIF: Digital audio output format. Select

from RAW and PCM.

8. Speaker: Choose to turn on / off the TV

internal speaker. The digital audio output

signals and earphone output signals will not

be turned off even though the TV speaker

is off. The default setting is On.

9. AVL: Choose On or off to adjust volume

to be consistent across programs and

channels automatically.

10. Preset: Restore the default audio settings.

FEATURE MENU

The Feature menu in TV mode shows as below.

This menu gives users the most flexibilities to

satisfy their generally demands. According to

the various requirements in different source

modes, certain features should be hidden

(disable) on the menu. The details footnotes

will be described clearly below.

Enter Exit

Feature

Video

Menu Language

Time

Advanced Video

Password Setting

Transparency

0

Parental Control

Closed Captions

Move Select Return Exit

English

Off

Audio

Feature

Channel

VGA

1. Menu Language: Select the menu display

language. (English / Français / Español)

2. Time: Set current time. The sub-menu

includes Time Mode, Time Zone and

Daylight Savings.

[Time Mode] – Choose from Auto or

Manual.

[Time Zone] – Set current time zone.

[Daylight Savings] – Set to On or Off.

Enter Exit

Time Set

Video

Time Mode

Time Zone

Daylight Savings

Month

Day

Time

Year

Move Select Return Exit

Auto

HST

Off

2007

Jan

1

4:32 PM

Audio

Feature

Channel

VGA

3. Advanced Video: Provide the Noise

Reduction, Adaptive Contrast, and DCR for

enhancing video quality.

[Noise Reduction] – Gives four NR

effect degrees, such as: Low, Mid, High and

Off. The default setting is Mid.

2ZQHUV0DQXDO

hsilgnE

[Adaptive Contrast] – Choose On or

off to adjust the gamma after analyzing the

input signal automatically.

[DCR] – Dynamic Contrast Ratio (DCR)

auto adjusts the backlight of the screen.

[Preset] – Restore the default advanced

video option settings.

4. Transparency: Adjust the transparency of

the on-screen menu from range 1 to 10.

5. Password Setting: Change the 4-numeral

parental control password. Three steps are

required for changing the password: Enter

Old Password -> Enter New Password ->

Confirm New Password. Note: This item is

only available in TV, Composite and S-Video

source modes. The default password is

ό

0

0 0 0

ύ

.

Enter Old Password

Enter New Password

Confirm New Password

6. Parental Control: provide the parental

Control (V-chip) function setting. Before

entering the Parental Control sub-menu,

user has to key in the password first. Enter

the Parental Locks item, then the user can

modify the restricted table about MPAA or

TV Rating respectively. While exiting the

sub-menu, the parental control function is

working. The inhibitive channels or source

signals can be un-lock through pressing

the V-CHIP key on the remote control

and then key in the correct password.

Note: This feature is only available in TV,

Composite and S-Video source modes.

(The default password is: 0 0 0 0.)

Enter Password

Enter Exit

Parental Control

Video

Button Lock

Block Unrated TV

USA Parental Locks

Open V-Chip

Canadian Parental Locks

Move Select Return Exit

Off

Audio

Feature

Channel

VGA

[Button Lock] – Select On or Off to

lock or unlock the control buttons on the

side panel of the TV. When this function

enables, the control buttons on your TV

will be locked and TV will be controlled by

remote control only.

[Block Unrated TV] – When Block

Unrated TV is set to on, your TV will block

unrated program.

[USA Parental Locks] – Set the parental

control level by MPAA or TV Rating.

[Canadian Parental Locks] – Set the

parental control level by English Rating or

French Rating.

[Open V-Chip] – Open V-Chip is an

advanced V-Chip rating system for digital

channels that are received.

The rating table will be updated by

downloading the RRT5 data for blocking.

7. Closed Captions Display: Select a closed

caption options. (Off / On / With Mute)

8. Analog Captions: Select an analog caption

options. (CC 1-4 / TEXT 1-4)

9. Digital Captions: Select a digital caption

options. (Service 1-6)

10.Digital Captions Setup: Provide

numerous options for setting the digital

closed caption style in the sub-menu.

13 TV LCD-TFT

hsilgnE

[Style] – Set to Automatic or Custom

mode. If Custom mode is selected, user can

modify the detail styles described below. The

setting result will be shown immediately on

the bottom of the sub-menu OSD. Note:

This feature is only available in Digital TV

(ATSC) mode.

[Size] – Digital closed caption font size,

which can be set as Automatic, Small,

Normal or Large.

[Font] – Digital closed caption font style,

which can be chosen as Automatic, Default

or Font 1 ~ 7.

[Text Color] – Automatic / White / Red

/ Green / Blue / Yellow / Magenta / Cyan /

Black

[Text Opacity] – Automatic / Solid /

Flashing / Transparent / Translucent

[Background Color] – Automatic /

Black / White/ Red / Green / Blue/ Yellow /

Magenta / Cyan

[Background Opacity] – Automatic /

Solid / Flashing / Transparent / Translucent

[Edge Effect] – Automatic / None / Raised

/ Depressed / Uniform / Left Shadow / Right

Shadow

[Edge Color] – Automatic / Red / Green

/ Blue / Yellow / Magenta / Cyan / Black /

White.

11.Input Labels: User can edit the input

labels.

12.Component Setting: This option only

shows and is available in component mode,

which provides fine tuning component

display.

[Phase] – Adjust Picture Phase to reduce

Horizontal-Line noise. The tuning range is

from 0 to 100.

[Preset] – Restore the default component

setting values.

13.Reset to Default: Restore all the default

settings.

VGA MENU

This option only shows and is available in VGA

mode, which provides several items for the

VGA display fine tuning.

1. H-Position: Adjust the horizontal position

of the picture. (0-100)

2. V-Position: Adjust the vertical position of

the picture. (0-100)

3. Clock: Adjust picture clock to reduce

Vertical-Line noise. (0-100)

4. Phase: Adjust Picture Phase to reduce

Horizontal-Line noise. (0-100)

5. Auto Adjust: Adjust the settings

automatically.

6. Preset: Restore the default VGA setting

values.

2ZQHUV0DQXDO

hsilgnE

TIPS

Care of the screen

Do not rub or strike the screen with anything

hard as this may scratch, mar, or damage the

screen permanently.

Unplug the power cord before cleaning the

screen. Dust the TV by wiping the screen

and the cabinet with a soft, clean cloth. If the

screen requires additional cleaning,

use a

clean, damp cloth. Do not use liquid cleaners

or aerosol cleaners.

Mobile telephone warning

To avoid disturbances in picture and sound,

malfunctioning of your TV or even damage

to the TV, keep away your mobile telephone

from the TV.

End of life directives

We are paying a lot of attention to produce

environmental friendly in green focal areas.

Your new receiver contains materials, which

can be recycled and reused.

At the end of its life, specialized companies

can dismantle the discarded receiver to

concentrate the reusable materials and to

minimize the amount of materials to be

disposed of.

Please ensure you dispose of your old

receiver according to local regulations.

Dolby License Notice and Trademark

Acknowledgement

Manufactured under license from Dolby

Laboratories. "Dolby" and the double-D

symbol are trademarks of Dolby Laboratories

Regulatory Notices – Federal

Communications Commission Notice

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

z

Reorient or relocate the receiving

antenna.

z

Increase the separation between the

equipment and the TV.

z

Connect the equipment into wall power

outlet on a circuit different from that to

which the receiver is connected.

z

Consult the dealer or an experienced

radio or television technician for help.

Modifications –

The FCC requires the user to be notified that

any changes or modifications made to this

device that are not expressly approved by

our company may void the user’s authority to

operate the equipment.

Cables –

Connections to this device must be made with

shielded cables with metallic RF/EMI connector

hoods to maintain compliance with FCC Rules

and Regulations.

Canadian notice –

This Class B digital apparatus meets all

requirements of the Canadian Interference-

Causing Equipment Regulations.

Avis Canadian –

Cat apparel numerous de la classed B

respected toutes les exigencies du règlement

sur le materiel brouilleur du Canada.

15 TV LCD-TFT

hsilgnE

PRODUCT SPECIFICATION

NOTE

*

This model complies with the specifications

listed below.

* Designs and specifications are subject to

change without notice.

* This model may not be compatible with

features and/or specifications that may be

added in the future.

* 32” LCD TV (31.5” viewable) Viewable im-

age size: 81cm diagonal

Television System:

NTSC standard

ATSC standard (8-VSB, Clear-QAM)

Channel Coverage:

VHF: 2 through 13

UHF: 14 through 69

Cable TV: Mild band (A - 8 through A - 1, A

through I )Super band (J through W)Hyper

band (AA through ZZ, AAA, BBB)Ultra band (65

through 94, 100 through 135)

Power Source:

AC power supply: 100-240V~50-60Hz

Power Consumption

d

150 W

<1 W in standby mode (power cord plugged in

and power OFF)

Audio Power

10 W + 10 W, Internal Speaker

Video/Audio Terminals:

Rear AV x1: S-Video/Video/Audio Input

Side AV x1: Video/Audio Input

S-VIDEO INPUT:

Y: 1 V(p-p), 75 ohm, negative sync.

C: 0.286 V(p-p) (burst signal), 75 ohm

VIDEO/AUDIO INPUT:

VIDEO: 1 V(p-p), 75 ohm, negative sync.

AUDIO: 300mv(rms)

Component INPUT:

Rear Component x2:

Y: 1V(p-p), 75 ohm, including sync.

Pr/Cr: ±0.35V(p-p), 75 ohm

Pb/Cb: ±0.35V(p-p), 75 ohm

AUDIO: 300mv(rms)

Supported resolutions: 1080i, 720p, 480p, 480i

HDMI Terminals:

HDMI INPUT: Rear HDMI x2; Side HDMI x1

HDCP compliant

E-EDID compliant

Supported scan rates: 1080i, 720p, 480p, 480i

VGA Terminals:

VGA INPUT:

Rear VGA (D-SUB 15 Pin) Input x1

E-EDID compliant

Supported scan rates:

640 x 480 /60Hz

800 x 600 /60Hz

1024 x 768 /60Hz

1360 x 768 /60Hz

Recommended: 1360 x 768 /60Hz

Audio INPUT: Headphone Mini-jack for stereo

(3.5Ø )

Audio Out: SPDIF / RCA Jack (R/L)

Environmental Temperature: 5°C - 35°C

Dimensions:

Include Stand:

78.3cm(W) x 55.9cm(H) x 20.9cm(L)

30.8inch(W)X 22.0inch(H) X 8.2inch

(L)

Weight:(Ibs/kg)

24.70/11.2 (With Stand)

21.83/9.9 (w/o stand and base)

Wall Mounting:

20.0x20.0cm

7.87 x 7.87inch

(Wall mount kit is not included)

Supplied Accessories:

1 x Power cord

1 x Remote control(with two size AAA alkaline

batteries)

1 x User manual

1 x FCC Card

1 x Register card

La page est en cours de chargement...

Haier HL42XD1a Le manuel du propriétaire

Ce manuel convient également à

Haier HL42XD1a Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents