Motorola IMPRES Smart Energy System Manuel utilisateur

Accessories

EN

DE

FR

PR

IT

NL

RU

CZ

Adaptive Multi-Unit Charger

Mehrfach-Rekonditionierungsladegerät

Chargeur Conditionneur Multiple

Cargador adaptable múltiple

Carregador auto adaptável múltiplo

Caricatore adattivo a più unità

Adaptieve meervoudige lader

Àäàïòèâíîå ìíîãîìåñòíîå çàðÿäíîå óñòðîéñòâî

Adaptivní víceèlánkovou nabíjeèku

ES

IMPRES™

Adaptive Mult-unit Charger

37D22-B_Cover_new.fm Page 1 Tuesday, July 11, 2006 3:17 PM

37D22-B_Cover_new.fm Page 2 Tuesday, July 11, 2006 3:17 PM

1

English

TABLE OF CONTENTS

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Operational Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

IMPRES Feature/Benefit Description . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operational Characteristics/Differences . . . . . . . . . . . . . . . . . . . . . . . 5

Battery Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Power Sources and Motorola Authorized Power Adapters . . . . . . . . 10

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Charging the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Manually Reconditioning the Batteries . . . . . . . . . . . . . . . . . . . . . 14

Automatically Reconditioning the Batteries . . . . . . . . . . . . . . . . . . 14

Manually Terminating the Reconditioning Process . . . . . . . . . . . . 15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chargers with Display Module (CDM) . . . . . . . . . . . . . . . . . . . . . . . . 18

This accessory manual is applicable to the following IMPRES Universal Multi-Unit

chargers:

WPLN4108, WPLN4109, WPLN4110, WPLN4118, WPLN4119, WPLN4120, WPLN4121,

WPLN4123, WPLN4130, WPLN4131, WPLN4132, WPLN4133, WPLN4134,

WPLN4135, WPLN4136

Additionally, this manual includes the following IMPRES Universal Multi-Unit chargers

that are available for the GP Professional Series radios:

WPLN4144, WPLN4145, WPLN4146, WPLN4187, WPLN4188, WPLN4189,

WPLN4190, WPLN4191, WPLN4192, WPLN4193, WPLN4194, WPLN4195,

WPLN4196, WPLN4204, WPLN4205

‘Universal’ denotes that the charger supports multiple radio models and, through the use

of battery adapters, all batteries listed in tables 1 - 6 inclusive.

37D22-B_Impres_MUC_EN.fm Page 1 Wednesday, July 12, 2006 2:02 PM

2

English

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This document contains important safety and operating instructions.

Please read these instructions carefully and save them for future

reference.

Before using the battery charger, read all the instructions and

cautionary markings on (1) the charger and (2) the battery (3) and on

the radio using the battery.

1. To reduce risk of injury, charge only the

rechargeable Motorola authorized batteries listed in

Tables 1 through 5. Other batteries may explode,

causing personal injury and damage.

2. Use of accessories not recommended by Motorola may result in

risk of fire, electric shock, or injury.

3. To reduce risk of damage to the electric plug and cord, pull by

the plug rather than the cord when disconnecting the charger.

4. An extension cord should not be used unless absolutely

necessary. Use of an improper extension cord could result in

risk of fire and electric shock. If an extension cord must be used,

make sure that the cord size is 18AWG for lengths of up to 100

feet (30.48m), and 16AWG for lengths up to 150 feet (45.72m).

5. To reduce risk of fire, electric shock, or injury, do not operate the

charger if it has been broken or damaged in any way. Take it to a

qualified Motorola service representative.

6. This unit is repairable.

Each pocket is powered by a unique

printed circuit board & power supply. The PCB / power supply

can be purchased from the Aftermarket / Parts organization.

The PCB replacement part number is RLN5325. No other

component level replacement parts are available. A service

manual describing the replacement process can also be

ordered from the Aftermarket / Parts organization. The Service

Manual Number is 6880309L66.

7. To reduce risk of electric shock, unplug the charger from the ac

outlet before attempting any maintenance or cleaning.

!

WARNING

37D22-B_Impres_MUC_EN.fm Page 2 Wednesday, July 12, 2006 2:02 PM

3

English

OPERATIONAL SAFETY GUIDELINES

• Turn the radio off when charging the battery.

• This equipment is not suitable for outdoor use. Use only in dry

locations/conditions.

• Connect equipment only to an appropriately fused and wired supply

of the correct voltage (as specified on the product).

• Disconnect from line voltage by removing the mains plug from the outlet.

• The socket outlet to which this equipment is connected should be

close and easily accessible.

• For equipment using fuses, replacements must comply with the type

and rating specified in the equipment instructions.

• Maximum ambient temperature around the charger must not exceed

40°C (104°F).

• Make sure the cord is located where it will not be stepped on, tripped

over, or subjected to water, damage, or stress.

• This unit utilizes the same wall mount unit as the NTN4796 Multi Unit

Charger. The wall mount part number is NLN7967.

• For fuse replacement, use only fuses of the same type and rating

listed on the charger label. The following parts can be ordered from

your local Parts / Aftermarket facility:

Fuse 6571489S01

Holder 0987626G01

Cover 0987739G01

37D22-B_Impres_MUC_EN.fm Page 3 Wednesday, July 12, 2006 2:02 PM

4

English

IMPRES FEATURE / BENEFIT DESCRIPTION

The IMPRES energy solution is an advanced Tri-Chemistry energy

system developed by Motorola which encompasses (a) IMPRES

batteries, (b) the IMPRES Adaptive Multi-Unit Charger, and (c) radio

hardware / software which provides the capability for IMPRES

compatible radios to communicate with IMPRES batteries (not

applicable for GP Professional Series radios).

The IMPRES Adaptive Multi-Unit Charger, when used in conjunction

with Motorola IMPRES batteries will:

• maximize operation time between charge cycles by automatically

eliminating memory effect

• maximize battery life by significantly reducing heat during the trickle

and post charge cycles

• eliminate the need to purchase reconditioning equipment and train

personnel to “manage battery maintenance tasks.”

With this unique patented system approach, there is no need to track

and record battery use, conduct manual reconditioning cycles or

remove batteries from chargers following charging.

The IMPRES Adaptive Multi-Unit Charger monitors the usage pattern

of the IMPRES batteries, stores that information in the IMPRES

batteries, and performs a recondition cycle only when needed.

The IMPRES Adaptive Multi-Unit Charger will not overheat the

batteries regardless of how long the batteries are left in the charger

pockets. The charger monitors the batteries and automatically “tops

off” the batteries, as required.

The IMPRES Adaptive Multi-Unit Charger simplifies the charging and

battery care process: Just follow these simple steps:

1. Place the radios / batteries into the charger pockets.

2. Remove the radios / batteries when fully charged!

Motorola is the only manufacturer that offers a conditioning or

reconditioning charger that provides users with the choice of charging

the radios with the batteries attached or the batteries separately.

37D22-B_Impres_MUC_EN.fm Page 4 Wednesday, July 12, 2006 2:02 PM

5

English

OPERATIONAL CHARACTERISTICS / DIFFERENCES:

1. IMPRES batteries may be charged in conventional chargers.

However, in order for the Smart Energy features to be enabled,

IMPRES batteries must be charged in the IMPRES Adaptive Multi-

Unit Charger. The first time an IMPRES battery is charged in an

IMPRES Adaptive Multi-Unit Charger, the charger initially indicates

a

STEADY YELLOW

on the charger indicator. This first charge

must be allowed to complete to a

STEADY GREEN

indication on

the charger indicator. This properly calibrates the IMPRES battery

and enables the Smart Energy features. If this process is

interrupted, the charger will calibrate the battery upon the next

insertion.

2. Since the IMPRES Adaptive Multi-Unit Charger automatically

determines the conditions necessary to recondition an IMPRES

battery, the charger may go into recondition mode when a radio or

battery is inserted. This is indicated by a

STEADY YELLOW

on the

charger indicator. The recondition mode can be over ridden, if

required, by removing and reinserting the radio or battery. (Please

see instructions later in this guide.)

3. The IMPRES Adaptive Multi-Unit Charger is designed to charge

any battery listed in Tables 1 through 6. However, only genuine

IMPRES batteries will provide Smart Energy features.

4. The IMPRES Adaptive Multi-Unit Charger must be used to calibrate

IMPRES Smart batteries to ensure they accurately record, store

and display IMPRES battery usage data.

37D22-B_Impres_MUC_EN.fm Page 5 Wednesday, July 12, 2006 2:02 PM

6

English

5. If an IMPRES battery is used with a display radio (e.g. XTS5000),

the radio may display an icon indicating the charge status of the

battery. This icon is enabled after an IMPRES battery has been

calibrated in an IMPRES charger. The charger status icon will

remain displayed as long as the user continues to use IMPRES

chargers to charge the batteries. However, if an IMPRES battery is

charged in a non-IMPRES charger for a period of 7 days (or more),

the icon will disappear. To re-enable the icon, insert an IMPRES

battery into an IMPRES charger and allow it to complete the

charging process (resulting in a

STEADY GREEN

indication). The

charge status icon will then be displayed on the radio. If the icon

does not appear after a full charge, place a partially discharged

battery (at least 70% discharged) into the charger, initiate a

reconditioning, and allow it to complete the charging process.

The icon will then appear on the radio display (not applicable to GP

Professional Series radios).

6. The IMPRES Adaptive Multi-Unit Charger can only be repaired by a

qualified service technician authorised by Motorola CGISS. Any

violation of this policy can void unit warranty.

37D22-B_Impres_MUC_EN.fm Page 6 Wednesday, July 12, 2006 2:02 PM

7

English

BATTERY LISTS

The following tables list the batteries that can be used with the specific

subscriber radios identified in the table headings.

*

Universal Charger requires battery adapter part number RLN5212 to charge MTP700

batteries

.

Table 1. ASTRO XTS3000 / XTS3500 / DiMetra Series Radios

& ASTRO XTS5000 Digital Radio

Kit (PN) Chemistry FM Smart Capacity New Model

HNN9031 NiCD No Yes Ultra High No

HNN9032 NiCD Yes Yes Ultra High No

NTN8294 NiCD No No Ultra High No

NTN8295 NiCD Yes No Ultra High No

NTN8297 NiCD Yes No Ultra High No

NTN8299 NiCD Yes No Ultra High No

NTN8610 LiIon No No High No

NTN8293 NiMH No No Ultra High No

NNTN4435 NiMH No Yes Ultra High No

NNTN4436 NiMH Yes Yes Ultra High No

NNTN4437 NiMH Yes Yes Ultra High No

RNN4006 NiMH No No Very High New

RNN4007 NIMH Yes No Very High New

NTN9862 LiIon No Yes Ultra High New

Table 2. ASTRO XTS2500 Digital Radios

Kit (PN) Chemistry FM Smart Capacity New Model

NTN9859 NiMH No No Ultra High New

NTN9857 NiMH Yes No Ultra High New

NTN9815 NiCD No No High New

NTN9816 NiCD Yes No High New

Table 3. MTP700 Digital Radios

Kit (PN) Chemistry FM Smart Capacity New Model

PMNN4048* NiMH No Yes High New

PMNN4049* NiMH Yes Yes High New

PMNN4050* Lilon No Yes High New

PMNN4047* LiIon No Yes High New

37D22-B_Impres_MUC_EN.fm Page 7 Wednesday, July 12, 2006 2:02 PM

8

English

**Universal Charger requires battery adapter part number 4385922B01 to charge Astro

Saber batteries

.

Table 4. HT1000 / MT2000 / MTS2000 / MTX8000

& MTX9000 Jedi Series Radios

Kit (PN) Chemistry FM Smart Capacity New Model

HNN9028 NiCD No Yes Ultra High No

HNN9029 NiCD Yes Yes Ultra High No

NTN7143 NiCD No No High No

NTN7144 NiCD No No Ultra High No

NTN7146 NiCD Yes No High No

NTN7147 NiCD Yes No Ultra High No

NTN7148 NiCD CENELEC No High No

NTN7149 NiCD CSA No High No

NTN7150 NiCD MSHA No High No

NTN7341 NiCD Yes No Ultra High No

NTN7372 NiCD Yes No High No

WPPN4013 NiMH No No Ultra High No

WPPN4037 NiMH Yes No Ultra high No

RNN4008 NiCD ATEX No High No

Table 5. Saber / Astro Saber/ SSE5000 / MX1000 Radios

Kit (PN) Chemistry FM Smart Capacity New Model

HNN9033 NiCD No Yes Ultra High No

HNN9031 NiCD Yes Yes Ultra High No

NTN4537** NiCD Yes No Low No

NTN4538 NiCD Yes No High No

NTN4592** NiCD No No Low No

NTN4593 NiCD No No High No

NTN4595 NiCD No No Ultra High No

NTN4596 NiCD Yes No Ultra High No

NTN4657 NiCD No No High No

NTN4671 NiCD CENELEC No High No

NTN4992 NiCD Yes No Ultra High No

NTN7014** NiMH No No High No

NTN7058 NiCD Yes No Ultra High No

NTN7426 NiCD Yes No Low No

NTN8251 NiMH Yes No Ultra High No

NTN8818** LiIon No No High No

37D22-B_Impres_MUC_EN.fm Page 8 Wednesday, July 12, 2006 2:02 PM

9

English

Universal Charger requires battery adapter part number RLN5648.

Table 6. GP Professional Series Radios

Kit (PN) Chemistry FM Smart Capacity New Model

HNN9003 NiMH

AA Bluetooth

No No High No

HNN9008 NiMH No No High No

HNN9009 NiMH No No Ultra High No

HNN9010 NiMH Yes No Ultra High No

HNN9011 NiCD Yes No High No

HNN9012 NiCD No No High No

HNN9013 LiIon No No High No

WPNN4045 NiMH No No High No

PMNN4045 NiMH No No High No

HNN4001 Impres NiMH No Yes Ultra High Yes

HNN4002 Impres NiMH Yes Yes Ultra High Yes

HNN4003 Impres LiIon No Yes Ultra High Yes

NOTE:

Adapters can be purchased from a radio sales or Aftermarket

sales team representative.

37D22-B_Impres_MUC_EN.fm Page 9 Wednesday, July 12, 2006 2:02 PM

10

English

POWER SOURCES AND MOTOROLA AUTHORIZED POWER ADAPTERS

This charger is designed for use in 100 V ac to 240 V ac, 50/60 Hz

applications and uses the following Motorola power cords shown in

Table 7. Power cords used with the charger for GP Professional Series

radios are listed in Table 8:

Table 7. Motorola Universal Model Power Cords

Plug Type Charger Kit Charger Kit

(Display Model)

Power Cord

No Power cord / plug WPLN4121 WPLN4127 None

U.S./NA WPLN4108 WPLN4130 3087791G01

Euro WPLN4109 WPLN4131 3087791G04

U.K. WPLN4110 WPLN4132 3087791G07

Australia/New Zealand WPLN4118 WPLN4133 3087791G10

Argentina WPLN4119 WPLN4134 3087791G13

U.S./NA WPLN4120 WPLN4135 3087791G01

Korea WPLN4123 WPLN4136 3087791G16

Table 8. Motorola GP Professional Series Model Power Cords

Plug Type Charger Kit Charger Kit

(Display Model)

Power Cord

No Power cord / plug WPLN4197 WPLN4198 None

U.S./NA WPLN4187 WPLN4192 3087791G01

Euro WPLN4189 WPLN4194 3087791G04

U.K. WPLN4188 WPLN4193 3087791G07

Australia/New Zealand WPLN4190 WPLN4195 3087791G10

Argentina WPLN4191 WPLN4196 3087791G13

U.S./NA WPLN4205 WPLN4204 3087791G01

Korea WPLN4146 WPLN4145 3087791G16

37D22-B_Impres_MUC_EN.fm Page 10 Wednesday, July 12, 2006 2:02 PM

11

English

OPERATING INSTRUCTIONS

The charger pockets accommodate either a radio with a battery

attached or a battery alone. Prior to charging a radio with a battery,

turn the radio off. Batteries charge best if they are at room

temperature when charged.

1. Plug the charger end of the power cord into the ac receptacle

located at the back of the charger.

2. Plug the wall receptacle end of the power cord into the appropriate

ac outlet. A successful power-up sequence is indicated by a

SINGLE FLASH GREEN

on the charger indicator.

3. Insert a battery, or radio with a battery (radio turned off), into a

charger pocket by:

a. aligning the groove on each side of the battery with the

corresponding raised rail on each side of the charger pocket

b. pressing the battery toward the rear of the pocket

c. sliding the battery into the charger pocket, ensuring complete

contact between the charger and battery contacts.

Once a battery is properly seated into a charger pocket, the charger

indicator illuminates, indicating the charger has recognized the

presence of a battery. Refer to the charging indicators in Table 9

.

NOTES

The IMPRES Multi-Unit Adaptive Charger charges only the

Motorola authorized batteries listed in Tables 1 through 6. Other

batteries may not charge.

The IMPRES Multi-Unit Adaptive Charger has automatic features

and capabilities that are different from other battery chargers.

Pay close attention to the charge indicator to ensure that the

charger is in the desired/expected mode of operation.

37D22-B_Impres_MUC_EN.fm Page 11 Wednesday, July 12, 2006 2:02 PM

12

English

In order for the features of Motorola Smart batteries and the Adaptive

Charging System to be fully available, the data contained in Motorola

Smart batteries must be initialized by the charger the first time it is

charged. This process is indicated by a

STEADY YELLOW

on the

charger indicator (the same as though the battery were reconditioning).

The process is automatic, includes an initial reconditioning of the

battery, and begins charging upon completion of this process. This

process requires time to initialize the battery, so the battery should be

left in the charger overnight on the initial insertion.

Table 9. Charging Indicators

Charge Indicator Description

Single Flash Green

Charger has successfully powered up.

Steady Red

Battery is in rapid charge mode.

Flashing Green

Battery has completed rapid charge (>90% available

capacity). Battery is in Top-Off charge (Trickle charge).

Steady Green

Battery has completed charging and is fully charged.

Flashing Yellow

Battery is recognized by charger but is waiting to charge.

(Either the battery voltage is too low or the battery

temperature is too low or to high to allow charging. When

this condition is corrected, the battery will begin charging.)

Flashing Red

Battery is unchargeable or not making proper contact.

Steady Yellow

(This feature is for Smart batteries only)

Battery is in recondition mode. The length of time the

charger remains in this mode is dependent upon the state

of charge remaining in the battery when inserted. (Fully

charged batteries require more time to recondition – 8

hours or more - than fully discharged batteries.)

Flashing Red/Green

(This feature is for Smart batteries only)

Battery has completed charging and is fully charged.

Battery continues to be usable, but may be nearing the end

of its rated service life.

NOTE

The IMPRES Adaptive Multi-Unit Charger is unique in that it

has the ability, when used with Motorola IMPRES batteries, to

automatically determine the need of the batteries to be

reconditioned.

37D22-B_Impres_MUC_EN.fm Page 12 Wednesday, July 12, 2006 2:02 PM

13

English

The IMPRES Adaptive Multi-Unit Charger operates both as:

•a Charger with all Motorola authorized batteries, and

•a Reconditioner with Motorola authorized IMPRES batteries.

Charging the Batteries

To ensure optimum performance, Motorola recommends all new

batteries be left in the charger 14 to 16 hours prior to initial use.

1. Once a battery or radio with a battery is properly inserted into a

charger pocket, the charger begins to rapid charge the battery and is

indicated by a

STEADY RED

on the charger indicator. The length of

time the charger indicates a

STEADY RED

is dependent upon the

charge remaining in the battery.

2. Completion of rapid charge (>90% available capacity) is indicated by

a

FLASHING GREEN

on the charger indicator. This indicates the

“top-off” charge (trickle charge) and requires approximately 1 hour.

3. Completion of “top-off” charge is indicated by a

STEADY GREEN

on the charger indicators. This indicates a battery is fully charged.

4. Other indications that

may

appear on the charger indicator while

charging are:

•

FLASHING YELLOW

– indicates that either the battery

temperature or the battery voltage is out of range for charging.

Charging resumes when theses conditions have been

corrected.

•

FLASHING RED AND GREEN

– indicates that the battery may

be approaching the end of its rated service life. While this battery

IMPORTANT:

The charger pockets are designed to accept several different

battery shapes and sizes, so it is important to make certain

that a radio with a battery attached or a battery alone is

inserted correctly. If a radio with a battery attached or battery

alone is inserted incorrectly, the indicator will not illuminate,

indicating that the battery is not being charged.

NOTE:

New batteries (never used before) prematurely indicate a full

charge in some cases (

STEADY GREEN

indication)

37D22-B_Impres_MUC_EN.fm Page 13 Wednesday, July 12, 2006 2:02 PM

14

English

is

fully charged, its charging capacity has been reduced by usage

and may not adequately support heavier applications. This

feature is available only when used with Motorola IMPRES

batteries. This is not a fault indication, merely a notification to the

user that a battery may soon no longer be able to yield expected

service and may need to be replaced.

•

FLASHING RED

– indicates that the battery is unchargeable.

This could be the result of a loss of contact between the battery

and the charger’s contacts. Charging resumes when the

condition causing this indication is corrected.

Motorola Smart batteries have an internal memory device that is read

by the Motorola IMPRES Adaptive Multi-Unit Charger. If an IMPRES

battery is charged for more than 2-1/2 minutes, the IMPRES Adaptive

Multi-Unit Charger retains the serial number of the IMPRES battery.

The IMPRES battery may be removed from the charger for up to 30

minutes. Once the battery is reinserted back into the charger, it will

resume the charging process from that point from when the battery

was first removed.

Manually Reconditioning the Batteries

Within 2-1/2 minutes of the initial insertion of an IMPRES battery

(

STEADY RED

indication), remove and reinsert the battery within 5

seconds to manually force reconditioning to occur. The charger

indicator changes from a

STEADY RED

to a

STEADY YELLOW

. This

forces the charger to recondition and automatically recharge the

battery.

Automatically Reconditioning the Batteries

The Motorola IMPRES Adaptive Multi-Unit Charger, when used in

conjunction with a Motorola IMPRES battery, has the ability to

determine when it is appropriate to recondition the battery.

NOTE:

Excessive use of this feature may reduce the overall life of the battery.

37D22-B_Impres_MUC_EN.fm Page 14 Wednesday, July 12, 2006 2:02 PM

15

English

When an IMPRES battery is properly inserted into the charger, the

charger determines if it is appropriate to recondition the battery. If the

battery needs reconditioning, the charger automatically indicates a

STEADY YELLOW

. This process may take up to 8 hours or more to

complete, depending upon the state of charge and capacity rating of

the battery when it is inserted.

It is important to note, for this process to be effective, the battery

must be allowed to complete the recondition/recharge process.

Leave the battery in the charger until the charger indicates a

STEADY GREEN

.

At the completion of the recondition cycle, the charger automatically

recharges the battery.

Manually Terminating the Reconditioning Process

At any time during the reconditioning process of a Motorola IMPRES

battery (

STEADY YELLOW

indication), reconditioning may be

terminated by removing and reinserting the battery within 5 seconds.

This causes the charger to terminate the reconditioning process and

begin the charging process. The charger indicator changes to a

STEADY RED

.

37D22-B_Impres_MUC_EN.fm Page 15 Wednesday, July 12, 2006 2:02 PM

16

English

TROUBLESHOOTING

The IMPRES Adaptive Multi-Unit Charger incorporates the features of:

• a universal input (100 V ac-240 V ac, 50/60 Hz) power supply

• a constant current rapid charger

• an interrupted current (negative pulse) conditioning charger

• a reconditioning unit.

The combination of the features listed above are unique in a desktop

charger. Therefore, operation of a radio with a battery attached while in

the charger is not recommended.

While in the charger, radio operation can result in minimally reduced

radio performance and extended battery charge time.

Towards the end of the rapid charge cycle (

STEADY RED

indication),

the battery voltage exceeds the normal operating voltage of the radio.

The voltage returns to a normal level following the rapid charge mode

or when the battery is removed from the charger.

If a radio is turned on while the charger is in rapid charge mode, the

radio becomes temporarily inoperable. This condition can be cleared

by removing the radio from the charger and turning the radio off and on

again.

During the reconditioning process, the battery becomes fully

discharged. As a result, the radio may not function during

reconditioning mode.

When troubleshooting, always observe the charge indicator – Refer to

Table 9.

37D22-B_Impres_MUC_EN.fm Page 16 Wednesday, July 12, 2006 2:02 PM

17

English

SERVICE

The IMPRES Adaptive Multi-Unit Charger can only be repaired by a

qualified service technician authorised by Motorola. Any violation of

this policy can void unit warranty.

Table 10. Troubleshooting

Problem What it means... What to do...

No charger

indication

• Charger contact is not

being made.

• No power to the charger.

• Check that the radio with battery,

or the battery alone, is inserted cor-

rectly.

• Make sure that the power cord is

securely plugged into the charger

and an appropriate ac outlet, and

that there is power to the outlet.

• Replace fuse(s).

Flashing Red

Indication

• Charger contact is not

being made.

• Battery is unchargeable.

• Remove the battery from the

charger and replace it back into the

charger.

• Verify that the battery is a Motorola

authorized battery listed in Tables 1

through 6. Other batteries may not

charge.

• Remove power from the battery

charger and, using a clean dry cloth,

clean the gold metal charging con-

tacts of both the battery and the

charger.

• Replace battery.

Flashing Yellow

Indication

• Battery it waiting to charge.

The battery temperature may

be below 5°C (41°F) or above

40°C (104°F) or the battery

voltage may be lower than the

predetermined threshold level

for rapid charging.

• When this condition is corrected,

the battery will begin charging.

37D22-B_Impres_MUC_EN.fm Page 17 Wednesday, July 12, 2006 2:02 PM

18

English

CHARGERS WITH DISPLAY MODULE (CDM)

The IMPRES Adaptive Multi-Unit Charger can be enhanced with the

addition of a charger display module (CDM), Motorola part no.

RLN5382.

General Display Information

The IMPRES

Adaptive Multi-Unit Charger with CDM provides the user

with valuable information while performing battery maintenance and

care. The information that the charger displays and the corresponding

LED indicators are detailed in the following tables.

Start Up

Non-IMPRES

Battery in the Pocket

IMPRES

Battery in the Pocket

Upon Charger Power-up

LED SINGLE FLASH GREEN

Line 1 IMPRES

Line 2

If There is No Battery in the Pocket

LED OFF

Line 1 NO BATTERY

Line 2

Reading Battery Data

LED Any Defined Indication

Line 1 READING

Line 2 BATTERY DATA

LED Defined by Charge State

Line 1 NON-IMPRES

Line 2 BATTERY

I

MPRES

and Software Versions are Displayed

LED Defined by Charge State

Line 1 IMPRES

Line 2 SW xx.yy; aa.bb

NOTE:

xx.yy denotes charger SW version, and aa.bb denotes CDM

SW version.

37D22-B_Impres_MUC_EN.fm Page 18 Wednesday, July 12, 2006 2:02 PM

La page est en cours de chargement...

Motorola IMPRES Smart Energy System Manuel utilisateur

Motorola IMPRES Smart Energy System Manuel utilisateur

dans d''autres langues

Documents connexes