Motorola IMPRES Smart Energy System Instructions Manual

IMPRES

™

Adaptive Multi-Unit Charger

Chargeur autoadaptable multiple

Carregador auto adaptável múltiplo

Cargador autoadaptable múltiple

MOTOROLA, the Stylized M Logo, and the IMPRES Logo are registered trademarks of Motorola, Inc.

All other product or service names are the property of their respective owners.

MOTOROLA et le logotype au M stylisé sont enregistrés auprès du Bureau des marques et brevets des États-Unis.

Tous les autres noms de produits et de services sont la propriété de leurs titulaires respectifs.

A marca MOTOROLA e o logotipo com a letra M estilizada estão registrados no Escritório de Marcas e Patentes dos EUA.

Todos os demais nomes de produtos e serviços são propriedades de seus respectivos detentores.

MOTOROLA y el logotipo con la M estilizada están registrados en la Oficina de Marcas y Patentes de los EE.UU.

Todos los demás nombres de productos y servicios son propiedad de sus respectivos dueños.

This accessory manual is applicable to the following IMPRES™ Multi-Unit chargers:

WPLN4108, WPLN4109, WPLN4110, WPLN4118, WPLN4119, WPLN4120, WPLN4121,

WPLN4123, WPLN4130, WPLN4131, WPLN4132, WPLN4133, WPLN4134, WPLN4135,

WPLN4136

Additionally, this manual includes the following IMPRES Multi-Unit chargers that are available

for the HT Professional Series radios:

WPLN4144, WPLN4145, WPLN4146, WPLN4187, WPLN4188, WPLN4189, WPLN4190,

WPLN4191, WPLN4192, WPLN4193, WPLN4194, WPLN4195, WPLN4196

Ce manuel d’accessoires se rapporte aux chargeurs multiples IMPRES™ suivants:

WPLN4108, WPLN4109, WPLN4110, WPLN4118, WPLN4119, WPLN4120, WPLN4121,

WPLN4123, WPLN4130, WPLN4131, WPLN4132, WPLN4133, WPLN4134, WPLN4135,

WPLN4136

En outre, ce manuel porte sur les chargeurs multiples IMPRES suivants offerts pour les

radios de la Série Professionnelle HT:

WPLN4144, WPLN4145, WPLN4146, WPLN4187, WPLN4188, WPLN4189, WPLN4190,

WPLN4191, WPLN4192, WPLN4193, WPLN4194, WPLN4195, WPLN4196

Este manual de acessório corresponde aos carregadores múltiplos IMPRES™ descritos a

seguir:

WPLN4108, WPLN4109, WPLN4110, WPLN4118, WPLN4119, WPLN4120, WPLN4121,

WPLN4123, WPLN4130, WPLN4131, WPLN4132, WPLN4133, WPLN4134, WPLN4135,

WPLN4136

Além disto, este manual incluiu os seguintes carregadores múltiplos IMPRES disponíveis

para os rádios da Série Profissional HT:

WPLN4144, WPLN4145, WPLN4146, WPLN4187, WPLN4188, WPLN4189, WPLN4190,

WPLN4191, WPLN4192, WPLN4193, WPLN4194, WPLN4195, WPLN4196

El presente manual de accesorio es aplicable a los siguientes cargadores múltiples

IMPRES™:

WPLN4108, WPLN4109, WPLN4110, WPLN4118, WPLN4119, WPLN4120, WPLN4121,

WPLN4123, WPLN4130, WPLN4131, WPLN4132, WPLN4133, WPLN4134, WPLN4135,

WPLN4136

Asimismo, este manual incluye los siguientes cargadores múltiples IMPRES disponibles

para los radios de la Serie Profesional HT:

WPLN4144, WPLN4145, WPLN4146, WPLN4187, WPLN4188, WPLN4189, WPLN4190,

WPLN4191, WPLN4192, WPLN4193, WPLN4194, WPLN4195, WPLN4196

01_09L67-C_MUC_TMs.fm Page 0 Friday, February 18, 2005 5:18 PM

1

English

TABLE OF CONTENTS

Important Safety Instructions......................................................3

Operational Safety Guidelines....................................................4

Operating Instructions ................................................................5

Charging Procedure ........................................................................ 5

Initialization.................................................................................7

Automatic Reconditioning...........................................................7

Manually Terminating the Reconditioning Process ......................... 8

Manually Initiating the Reconditioning Process ............................... 8

Troubleshooting..........................................................................8

Service........................................................................................9

Motorola Authorized Power Cords............................................10

Motorola Authorized Batteries ..................................................11

IMPRES Feature / Benefit Description .....................................14

Charger Display Module (CDM) ...............................................16

General Display Information .......................................................... 16

Sequencing Diagrams for IMPRES Batteries ................................ 21

English

2

3

English

IMPORTANT

SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This document contains important safety and operating instructions.

Please read these instructions carefully and save them for future

reference.

Before using the battery charger, read all the instructions and

cautionary markings on (1) the charger, (2) the battery, and (3) the

radio using the battery.

1. To reduce risk of injury, charge only the rechargeable

Motorola-authorized batteries listed in Tables 5 through

10. Other batteries may explode, causing personal

injury and damage.

2. Use of accessories not recommended by Motorola may result in

risk of fire, electric shock, or injury.

3. To reduce risk of damage to the electric plug and cord, pull by the

plug rather than the cord when disconnecting the charger.

4. An extension cord should not be used unless absolutely necessary.

Use of an improper extension cord could result in risk of fire and

electric shock. If an extension cord must be used, make sure that

the cord size is 18AWG for lengths of up to 100 feet (30.48m), and

16AWG for lengths up to 150 feet (45.72m).

5. To reduce risk of fire, electric shock, or injury, do not operate the

charger if it has been broken or damaged in any way. Take it to a

qualified Motorola service representative.

!

W A R N I N G

!

02_09L67-C_MUC_Eng.fm Page 3 Thursday, February 24, 2005 4:37 PM

4

English

WARNINGS (continued)

6. The IMPRES Adaptive Multi-Unit Charger can only be

repaired by a qualified service technician authorized by

Motorola. Any violation of this policy can void unit

warranty.

7. To reduce risk of electric shock, unplug the charger from the AC

outlet before attempting any maintenance or cleaning.

8. For fuse replacement, use only fuses of the same type and rating

listed on the charger label. Replace fuses with Cooper-Bussman

GDC-3.15 or approve equivalent only. The following parts can be

ordered from Motorola Radio Products and Services Division (1-

800-422-4210 [US and Canada] or 1-847-538-8023 [International]):

Fuse 6587577G01

Cover 0987739G01

OPERATIONAL SAFETY GUIDELINES

• Turn the radio off when charging the battery.

• This equipment is not suitable for outdoor use. Use only in dry

locations/conditions.

• Connect equipment only to an appropriately fused and wired supply

of the correct voltage (as specified on the product).

• Disconnect from line voltage by removing the main plug from the outlet.

• The socket outlet to which this equipment is connected should be

close and easily accessible.

• For equipment using fuses, replacements must comply with the type

and rating specified in the equipment instructions.

• Maximum ambient temperature around the charger must not exceed

40°C (104°F).

• Make sure the cord is located where it will not be stepped on, tripped

over, or subjected to water, damage, or stress.

• This unit utilizes the same wall mount unit as the NTN4796 Multi-Unit

Charger. The wall mount part number is NLN7967.

!

W A R N I N G

!

02_09L67-C_MUC_Eng.fm Page 4 Thursday, February 24, 2005 4:37 PM

5

English

OPERATING INSTRUCTIONS

The IMPRES Adaptive Charger System is a fully automated battery

care system. All a user needs to do is follow these simple steps:

1. Place the radio / IMPRES battery into the charger.

2. Remove the radio / IMPRES battery when it's fully charged (LED

turns steady GREEN).

The charger pockets accommodate either a radio with an IMPRES

battery attached or an IMPRES battery alone. Prior to charging a

radio with an IMPRES battery, turn the radio off. Batteries charge

best at room temperature.

Charging Procedure

1. Plug the charger end of the power supply cord into the power

receptacle located at the back of the charger.

2. Plug the wall receptacle end of the power supply cord into the

appropriate AC outlet. A successful power-up sequence is

indicated by a SINGLE FLASH GREEN on the charger indicator.

3. Insert an IMPRES battery, or a radio with an IMPRES battery (with

the radio turned off), into the charger’s pocket by:

a. Aligning the groove on each side of the battery with the

corresponding raised rail on each side of the charger pocket.

b. Pressing the battery toward the rear of the pocket.

c. Sliding the battery into the charger pocket, ensuring complete

contact between the charger and battery contacts.

4. To remove a radio or IMPRES battery from the charger, use two

hands to remove a radio or battery from the charger pocket - one

hand to hold and support the charger, and the other hand to remove

the radio or battery.

02_09L67-C_MUC_Eng.fm Page 5 Thursday, February 24, 2005 4:37 PM

6

English

Once the IMPRES battery is properly seated into the pocket, the

charger indicator illuminates, indicating the charger has recognized the

presence of the battery. Refer to the charging indicators in Table 1.

NOTES:

If an IMPRES battery requires one of the battery adapters (see

Tables 5 through 10), push back the battery guide (inside rear

of the pocket) and slide the battery adapter in place. When

applicable, reverse the procedure to remove the adapter.

• The MTP700 battery adapter, RLN5212, slides in place

from the top. To remove, apply outward pressure to the inside

tabs located at the bottom. Insertion and removal instruction

sheets are enclosed with the adapter.

• The ASTRO Saber adapter, 4385922B01, slides in place

and is removed easily. The charger pocket rocker bar must be

depressed when inserting the adapter.

Table 1. IMPRES Battery Charging Indicators

Charge Indicator Description

Single Flash Green Charger has successfully powered up.

Steady Red Battery is in rapid charge mode.

Flashing Green Battery has completed rapid charge (>90% available

capacity). Battery is in Top-Off charge (Trickle

charge).

Steady Green Battery has completed charging and is fully charged.

Flashing Yellow Battery is recognized by charger but is waiting to

charge. (Either the battery voltage is too low or the

battery temperature is too low or too high to allow

charging. When this condition is corrected, the battery

will automatically begin charging.)

Flashing Red Battery is unchargeable or not making proper contact.

Steady Yellow (This feature applies to IMPRES batteries only)

Battery is in recondition or initialization mode. The

length of time the charger remains in this mode

depends upon the state of charge remaining in the

battery when inserted. (Fully charged batteries

require more time to recondition – 8 to 12 hours or

more – than fully discharged batteries.)

Flashing Red/Green (This feature applies to IMPRES batteries only)

Battery has completed charging and is fully charged.

Battery continues to be usable, but may be nearing

the end of its rated service life.

02_09L67-C_MUC_Eng.fm Page 6 Thursday, February 24, 2005 4:37 PM

7

English

INITIALIZATION

In order for the features of Motorola IMPRES batteries and the

Adaptive Charging System to be fully available, the data contained in

Motorola IMPRES batteries must be initialized by the charger the first

time it is charged. This process is indicated by a STEADY YELLOW

light on the charger indicator (the same as if the battery were

reconditioning). The process is automatic, includes an initial

reconditioning of the battery, and begins charging upon completion of

this process. This process requires time to initialize the battery, so the

battery should be left in the charger for approximately 12 hours to

complete the process. Do not remove the battery from the charger until

the STEADY GREEN light is on.

AUTOMATIC RECONDITIONING

The Motorola IMPRES Adaptive Charger, when used in conjunction

with a Motorola IMPRES battery, has the ability to determine when it is

appropriate to recondition the battery (required to remove memory

issues in IMPRES batteries).

When an IMPRES battery is properly inserted into the charger, the

charger determines if it is appropriate to recondition the battery. If the

battery needs reconditioning, the charger automatically indicates a

STEADY YELLOW. This process may take up to 12 hours to complete,

depending upon the state of charge and capacity rating of the battery

when it is inserted.

It is important to note, for this process to be effective, the IMPRES

battery must be allowed to complete the recondition/recharge process.

Leave the battery in the charger until the charger indicates a STEADY

GREEN.

At the completion of the recondition cycle, the charger automatically

recharges the IMPRES battery.

02_09L67-C_MUC_Eng.fm Page 7 Thursday, February 24, 2005 4:37 PM

8

English

Manually Terminating the Reconditioning Process

At any time during the reconditioning process of a Motorola IMPRES

battery (STEADY YELLOW indication), reconditioning may be

terminated by removing and reinserting the battery back into the

charger within 5 seconds. This causes the charger to terminate the

reconditioning process and begin the charging process. The charger

indicator changes to a STEADY RED. The charger will attempt to

recondition the battery at the next battery insertion.

Manually Initiating the Reconditioning Process

Within 2-1/2 minutes of the initial insertion of an IMPRES battery

(STEADY RED indication), remove and reinsert the battery within 5

seconds to manually force reconditioning to occur. The charger

indicator changes from a STEADY RED to a STEADY YELLOW. This

forces the charger to recondition and automatically recharge the

battery. This is a useful feature to have when IMPRES batteries have

been in storage for several months or longer. Two or three manual

recondition cycles may be required to rejuvenate the batteries, due to

long term storage conditions.

TROUBLESHOOTING

When troubleshooting, always observe the color of the LED.

Table 2. Troubleshooting

Problem What it means... What to do...

No charger

indication

1a. Charger contact is not

being made.

1b. No power to the

charger.

1a. Check that the radio with bat-

tery, or the battery alone, is in-

serted correctly.

1b. • Make sure that the power

cord is securely plugged into

the charger and an

appropriate AC outlet, and

that there is power to the

outlet.

• Replace fuses.

02_09L67-C_MUC_Eng.fm Page 8 Thursday, February 24, 2005 4:37 PM

9

English

SERVICE

the IMPRES Adaptive Multi-Unit Charger can only be repaired by a

qualified service technician authorized by Motorola. Any violation of

this policy will void the unit warranty. For more information on

serviceability of the Multi-Unit Charger and Charger Display Module,

refer to the charger service manual, 6880309L66.

For service, contact the following depot. Please call and confirm your

return before sending the unit to the depot for service.

Motorola Service Center

2200 Galvin Drive

Elgin, IL 60123

1-800-422-4210 (US & Canada)

1-847-538-8023 (International)

Flashing Red

Indication

2a. Charger contact is not

being made.

2b. Battery is not charge-

able.

2a. • Remove the battery from the

charger and replace it back

into the charger.

• Verify that the battery is a

Motorola-authorized battery

listed in Tables 5 through 10.

Other batteries may not

charge.

• Remove power from the

battery charger and, using a

clean dry cloth, clean the

gold metal charging contacts

of both the battery and the

charger.

2b. Replace battery.

Flashing

Yellow

Indication

3. Battery is waiting to

charge. The battery

temperature may be

below 5°C (41°F) or

above 40°C (104°F) or

the battery voltage may

be lower than the pre-

determined threshold

level for rapid charging.

3. When this condition is correct-

ed, the battery will begin

charging automatically.

Table 2. Troubleshooting (continued)

Problem What it means... What to do...

02_09L67-C_MUC_Eng.fm Page 9 Thursday, February 24, 2005 4:37 PM

10

English

MOTOROLA AUTHORIZED POWER CORDS

This charger is designed for use in 100 VAC to 240 VAC, 50/60 Hz

applications and uses the following Motorola power cords.

Table 3. Motorola Power Cords

Plug Type Charger Kit Charger Kit

(Display

Model)

Power Cord

No Power cord / plug WPLN4121 WPLN4127 None

U.S./NA WPLN4108 WPLN4130 3087791G01

Euro WPLN4109 WPLN4131 3087791G04

U.K. WPLN4110 WPLN4132 3087791G07

Australia/New Zealand WPLN4118 WPLN4133 3087791G10

Argentina WPLN4119 WPLN4134 3087791G13

U.S./NA WPLN4120 WPLN4135 3087791G01

Korea WPLN4123 WPLN4136 3087791G16

Table 4. Motorola HT Professional Series Power Cords

Plug Type Charger Kit Charger Kit

(Display

Model)

Power Cord

No Power cord / plug WPLN4197 WPLN4198 None

U.S./NA WPLN4187 WPLN4192 3087791G01

Euro WPLN4189 WPLN4194 3087791G04

U.K. WPLN4188 WPLN4193 3087791G07

Australia/New Zealand WPLN4190 WPLN4195 3087791G10

Argentina WPLN4191 WPLN4196 3087791G13

Korea WPLN4146 WPLN4145 3087791G16

02_09L67-C_MUC_Eng.fm Page 10 Thursday, February 24, 2005 4:37 PM

11

English

MOTOROLA AUTHORIZED BATTERIES

The following tables list batteries that can be used with the specific

subscriber radios identified in the table headings.

Table 5. Standard & IMPRES Batteries for

ASTRO

®

XTS 3000 / ASTRO XTS 3500 / DiMetra Series Radios /

ASTRO XTS 5000 Digital Radios

Kit (PN) Chemistry FM IMPRES Capacity

HNN9031 NiCD No Yes Ultra High

HNN9032 NiCD Yes Yes Ultra High

NTN8294 NiCD No No Ultra High

NTN8295 NiCD Yes No Ultra High

NTN8297 NiCD Yes No Ultra High

NTN8299 NiMH Yes No Ultra High

NTN8610 Li-Ion No No High

NTN8923 NiMH No No Ultra High

RNN4006 NiMH No No Very High

RNN4007 NiMH Yes No Very High

NNTN4435 NiMH No Yes Ultra High

NNTN4436 NiMH Yes Yes Ultra High

NNTN4437 NiMH Yes Yes Ultra High

NTN9862 Li-Ion No Yes Ultra High

Table 6. Standard & IMPRES Batteries for

ASTRO XTS 2500 Digital Radio

Kit (PN) Chemistry FM IMPRES Capacity

NTN9857 NiMH Yes No Ultra High

NTN9858 NiMH No No Ultra High

NTN9815 NiCD No No High

NTN9816 NiCD Yes No High

02_09L67-C_MUC_Eng.fm Page 11 Tuesday, March 1, 2005 10:50 AM

12

English

Table 7. Standard & IMPRES Batteries for

MTP700 Digital Radio

Kit (PN) Chemistry FM IMPRES Capacity

PMNN4048* NiMH No Yes High

PMNN4049* NiMH Yes Yes High

PMNN4047* Li-Ion No Yes High

* Charger requires battery adapter part number RLN5212 to

charge MTP700 batteries.

Table 8. Standard & IMPRES Batteries for

HT1000 / MT2000 / MTS2000 / MTX8000 / MTX9000 /

GP900 Series Radios

Kit (PN) Chemistry FM IMPRES Capacity

HNN9028 NiCD No Yes Ultra High

HNN9029 NiCD Yes Yes Ultra High

NTN7143 NiCD No No High

NTN7144 NiCD No No Ultra High

NTN7146 NiCD Yes No High

NTN7147 NiCD Yes No Ultra High

NTN7148 NiCD Cenelec No High

NTN7149 NiCD CSA No High

NTN7150 NiCD MSHA No High

NTN7341 NiCD Yes No Ultra High

NTN7372 NiCD Yes No High

WPPN4013 NiMH No No Ultra High

WPPN4037 NiMH Yes No Ultra High

RNN4008 NiCD ATEX No High

02_09L67-C_MUC_Eng.fm Page 12 Thursday, February 24, 2005 4:37 PM

13

English

Table 9. Standard & IMPRES Batteries for

Saber / ASTRO Saber / MX1000 / SSE 5000 Radios

Kit (PN) Chemistry FM IMPRES Capacity

HNN9033 NiCD No Yes Ultra High

HNN9034 NiCD Yes Yes Ultra High

NTN4537** NiCD Yes No Low

NTN4538 NiCD Yes No High

NTN4592** NiCD No No Low

NTN4593 NiCD No No High

NTN4595 NiCD No No Ultra High

NTN4596 NiCD Yes No Ultra High

NTN4657 NiCD No No High

NTN4671 NiCD Cenelec No High

NTN4992 NiCD Yes No Ultra High

NTN7014** NiMH No No High

NTN7058 NiCD Yes No Ultra High

NTN7426 NiCD Yes No Low

NTN8251 NiMH Yes No Ultra High

NTN8818** Li-Ion No No High

** Charger requires battery adapter part number 4385922B01 to

charge ASTRO Saber batteries.

Table 10. Standard & IMPRES Batteries for

HT and GP Professional Series Radios Batteries

Kit (PN) Chemistry FM IMPRES Capacity

HNN9003 NiMH No No High

HNN9008 NiMH No No High

HNN9009 NiMH No No Ultra High

HNN9010 NiMH Yes No Ultra High

HNN9011 NiCD Yes No High

HNN9012 NiCD No No High

HNN9013 Li-Ion No No High

WPNN4045 NiMH No No High

HNN4001 NiMH No Yes Ultra High

02_09L67-C_MUC_Eng.fm Page 13 Thursday, February 24, 2005 4:37 PM

14

English

HNN4002 NiMH Yes Yes Ultra High

HNN4003 Li-Ion No Yes Ultra High

Table 10. Standard & IMPRES Batteries for

HT and GP Professional Series Radios Batteries (continued)

Kit (PN) Chemistry FM IMPRES Capacity

02_09L67-C_MUC_Eng.fm Page 14 Thursday, February 24, 2005 4:37 PM

15

English

IMPRES FEATURE / BENEFIT DESCRIPTION

The IMPRES energy solution is an advanced Tri-Chemistry energy

system developed by Motorola which encompasses (a) IMPRES

batteries, (b) the IMPRES Adaptive Multi-Unit Charger and, (c) radio

hardware/software which provides the capability for IMPRES

compatible radios to communicate with IMPRES batteries.

The IMPRES Adaptive Multi-Unit Charger, when used in conjunction

with Motorola IMPRES batteries, will:

1. Maximize operation time between charge cycles by automatically

eliminating memory effect.

2. Maximize battery life by significantly reducing heat during the trickle

and post-charge cycles.

3. Eliminate the need to purchase reconditioning equipment and train

personnel to “manage battery maintenance tasks.”

With this unique patented system approach, there is no need to track

and record IMPRES battery use, conduct manual reconditioning

cycles, or remove batteries from chargers following charging.

The IMPRES Adaptive Multi-Unit Charger monitors the usage pattern

of the IMPRES battery, stores that information in the IMPRES battery,

and performs a recondition cycle only when needed.

The IMPRES Adaptive Multi-Unit Charger will not overheat the

IMPRES battery regardless of how long it is left in the pocket. The

charger monitors the battery and automatically “tops off” the battery as

required.

02_09L67-C_MUC_Eng.fm Page 15 Thursday, February 24, 2005 4:37 PM

16

English

CHARGER DISPLAY MODULE (CDM)

The IMPRES Adaptive Multi-Unit Charger can be enhanced with the

addition of a charger display module (CDM). For chargers with

software version 1.3 or later, order and install Motorola part no.

RLN5382. For chargers with software versions 1.2 or earlier and/or

non-marked labels, which require a flash upgrade, send the charger to

the Motorola Service Center to perform the upgrade and install the

CDM (part no. RLN5382).

General Display Information

The IMPRES

Adaptive Multi-Unit Charger with CDM provides the user

with valuable information while performing battery maintenance and

care. The information that the charger displays and the corresponding

LED indicators are detailed in the following tables.

Start Up

Upon Charger Power-up

LED SINGLE FLASH GREEN

Line 1 IMPRES

Line 2

If There is No Battery in the Pocket

LED OFF

Line 1 NO BATTERY

Line 2

Reading Battery Data

LED Any Defined Indication

Line 1 READING

Line 2 BATTERY DATA

03_09L67-C_Addendum.fm Page 16 Thursday, February 24, 2005 5:34 PM

17

English

Non-IMPRES

Battery in the Pocket

IMPRES

Battery in the Pocket

LED Defined by Charge State

Line 1 NON-IMPRES

Line 2 BATTERY

IMPRES

and Software Versions are Displayed

LED Defined by Charge State

Line 1 IMPRES

Line 2 SW xx.yy; aa.bb

NOTE:

xx.yy denotes charger SW version, and aa.bb denotes CDM

SW version.

IMPRES

Battery Kit # and Serial # are Displayed

(Each IMPRES battery shows a unique serial # for Easy ID)

LED Defined by Charge State

Line 1 KIT# --------

Line 2 SN: --------------

IMPRES

Battery Kit # and Chemistry are Displayed

LED Defined by Charge State

Line 1 KIT# --------

Line 2 -----CHEMISTRY

Forecasted # of Cycles Prior to Automatic Recondition

LED Defined by Charge State

Line 1 ----CYCLES

Line 2 TO RECONDITION

* Displayed only when the number of cycles prior to the next reconditioning

cycle is estimated to be less than six.

03_09L67-C_Addendum.fm Page 17 Thursday, February 24, 2005 5:34 PM

18

English

Charger Waiting to Charge, Battery is Hot

LED Flashing YELLOW

Line 1 WAITING TO CHG

Line 2 HOT BATTERY

Charger Waiting to Charge, Battery is Cold

LED Flashing YELLOW

Line 1 WAITING TO CHG

Line 2 COLD BATTERY

Charger Waiting to Charge, Low Voltage

LED Flashing YELLOW

Line 1 WAITING TO CHG

Line 2 LOW VOLTAGE

NOTE:

Not all screens shown above will be displayed. For example,

Waiting to Charge displays (battery hot, cold, low voltage) will

only be shown if the situation warrants.

Charger is in Rapid Charge Mode

LED Steady RED

Line 1 RAPID CHARGE

Line 2

Charger is in Trickle Charge Mode

LED Flashing GREEN

Line 1 TRICKLE CHARGE

Line 2

Charge is Complete

LED Steady GREEN or Flashing RED / GREEN

Line 1 CHARGE COMPLETE

Line 2

03_09L67-C_Addendum.fm Page 18 Thursday, February 24, 2005 5:34 PM

La page charge ...

Motorola IMPRES Smart Energy System Instructions Manual

Motorola IMPRES Smart Energy System Instructions Manual

dans d''autres langues

Documents connexes