Energizer ALSRL7 Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

ALSRL7SMART Lantern Instructions
1. Scan the QR code on the package and download the Energizer mobile app.
2. Enable Bluetooth on your mobile phone and turn on location services for Android phones.
3. Open the app and follow the on-screen instruction to connect to your light.
4. To pair your light with the app:
a. Ensure the light is turned off and press and hold the power button.
b. The main LED light will turn on.
c. Keep pressing for 5 seconds until the main lights turn off and a blue light starts to pulse.
d. Release the power button.
e. The device is now in pairing mode and should sync with your app.
5. Once connected to your light, you can select it from the list to enter the control screen.
6. Repeat the process for each additional Energizer SMART light you want to connect to your app.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
CAN ICES-005(B)/NMB-005(B)
IC STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following
two conditions:
1This device may not cause interference.
2This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licencecontenu dans le présentappareilestconforme aux CNR d
Innovation, Sciences et Développementéconomique Canada applicables aux appareils radio
exempts de licence. L’exploitationestautorisée aux deux conditions suivantes :
1Lappareil ne doit pas produire de brouillage;
2L’appareil doit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible
dencompromettre le fonctionnement.
  • Page 1 1
  • Page 2 2

Energizer ALSRL7 Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues