Silk'n SILK'N INFINITY SMOOTH IPL HÅRFJERNINGSSETT Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

www.silkn.eu [email protected]
InnoEssentials International
Donk 1b, 2991 LE Barendrecht,
The Netherlands
Infinity
H3101
USER MANUAL
MODE D’EMPLOI
MANUAL DEL USUARIO
MANUAL DO UTILIZADOR
ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΤΗ
BRUKERHÅNDBOK
ANVÄNDARMANUAL
BRUGERMANUAL
BEDIENUNGSANLEITUNG
KULLANIM KILAVUZU
MANUALE PER L’UTENTE
NL
ES
PT
GR
NO
FI
SV
DA
RU
DE
EN
EN
EN
DE
FR
NL
ES
PT
GR
TR
NO
IT
SV
DA
GEBRUIKSAANWIJZING
Infinity UM EU124 NEW 0037C cover ED227-06 release.indd 1 20/03/2018 09:17:37
1
2
3
4
5
8
1
2
3
4
5
6
7
9
1-5 1-5 1-4 1-3 1-2
1-5 1-5 1-4 1-3 1-2 1-2
Skin colour / Hautfarbe / Couleur de peau /
Color de la piel / Colore della pelle
Energy* Energy Energy Energy Energy Energy
* Energie / Énergie / Energía / Energia
Hair colour / Haarfarbe / Couleur de cheveux /
Color del vello / Colore dei peli
Infinity UM EU124 NEW 0037C cover ED227-06 release.indd 2 20/03/2018 09:17:37
Table of contents
1. Warnings and contraindications........................................2
2. Safety with Silk’n Innity ................................................... 8
3. Get to know your Silk’n Innity .........................................9
4. Device controls and settings ............................................ 10
5. What to expect with Silk’n Innity ..................................13
6. Possible side eects .......................................................... 13
7. Treatment plan .................................................................. 15
8. Get started! ........................................................................16
9. Cleaning and maintenance ..............................................18
10. Connect your Silk’n Innity to Bluetooth .......................18
11. Troubleshooting ...............................................................18
12. Customer service ...............................................................19
13. Warranty ............................................................................20
14. Disposal .............................................................................20
15. Specications ....................................................................21
16. Signs and symbols ............................................................22
1
EN
Infinity EU124 0037C inside ED227-20 release.indd 1 20/03/2018 09:19:41
1. Warnings and contraindications
The user manual is based on the standards
and rules in force in the European Union.
When abroad, you must also observe
country-specic guidelines and laws. Please
read all warnings and contraindications
before use.
CAlways ensure that your hands are dry
before connecting the adapter to the
electricity supply.
CDo not use the device while bathing or
taking a shower.
CKeep the device away from water! Do not
place or store the device where it can fall,
be pushed or placed into a tub, sink or any
other vessel containing water.
CNever immerse the device or any of its
parts in water.
CIf the device has come into contact with
water, disconnect it immediately from the
electricity supply before touching it.
CNever use the adapter if it has a damaged
cable or plug, or isn’t working properly,
or has been submerged in water. If that
happens, unplug the adapter immediately
before touching it. Failure to unplug the
adapter may result in an electric shock!
2
EN
Infinity EU124 0037C inside ED227-20 release.indd 2 20/03/2018 09:19:41
CDo not operate the device in environments
where there is a risk of explosion. Keep the
device and all its parts away from open
ames and hot surfaces.
CNever leave the device unattended when
connected to the electricity supply. Keep
the adapter accessible at all times, so it can
be removed from the electricity supply
easily in case of emergency.
CAlways switch the device o and discon-
nect it from the electricity supply when you
are not using the device, when you intend
to clean it, or in the event of a fault.
CNever pull the adapter out of the socket by
the cable. Always remove it by taking hold
of the adapter.
CPlace the adapter cable in such a way that it
does not pose a tripping hazard.
CDo not kink the adapter cable and do
not lay it over sharp edges.
CKeep the device away from the eyes.
Possible hazardous optical radiation is
emitted from this device. Do not look at the
operating lamp. Eye injury may result.
CChanges or modications to this device
not expressly approved by the party
responsible for compliance could void
3
EN
Infinity EU124 0037C inside ED227-20 release.indd 3 20/03/2018 09:19:41
the user’s authority to operate the equip-
ment.
CDo not use if the parts or accessories
are not supplied by the manufacturer as
dened in this manual, or if the device
is damaged in any way, does not appear
to be working properly, or if you see or
smell smoke. In such cases, stop using the
device and contact Customer Service.
COnly authorized personnel are permitted
to perform repairs. Do not attempt to
modify, open or repair the device. You
may expose yourself to dangerous
electrical components and may cause
serious harm to yourself. It will also void
the warranty.
CThe manufacturer accepts no liability for
damage or injuries caused by improper
or incorrect use.
CChildren must not play with the device or
any of its parts.
CChildren must not play with the packaging.
They may injure themselves with the
packaging material, or swallow small parts
and choke.
4
EN
Infinity EU124 0037C inside ED227-20 release.indd 4 20/03/2018 09:19:41
CDo not dispose with household waste!
The law requires that you dispose of this
electrical device (including all accessories
and parts) at a designated recycling collec-
tion point for electrical devices. For details
see section “14. Disposal”.
Contraindications
CSilk'n Innity must not be used by the
following people: children, adults with
limited physical, sensory or psychological
capacities, or those lacking experience or
knowledge in how to use the device.
CSilk'n Innity is not designed for everyone.
Hair removal by lasers or intense pulsed light
sources can cause increased hair growth
in some individuals. Based upon currently
available data, the highest risk groups for
this response are females of Mediterranean,
Middle Eastern and South Asian heritage
treated on the face and neck.
CSilk'n Innity is not suitable for use on
children or animals.
Do not use if you:
Care pregnant or nursing.
Chave a history of keloidal scar formation.
Chave suered or suer from epilepsy.
5
EN
Infinity EU124 0037C inside ED227-20 release.indd 5 20/03/2018 09:19:41
Chave a disease related to photosensitivity,
such as porphyria, polymorphic light
eruption, solar urticaria, lupus, etc.
Chave a history of skin cancer or areas of
potential skin malignancies.
Chave received radiation therapy or chemo-
therapy treatments within the past 3
months.
Chave received drugs from your physician for
a skin condition within the past 6 months.
Chave any other condition which in your
physician’s opinion would make it unsafe
for you to use the device.
Ccannot sense heat properly because of an
illness, or other health related issue.
Do not use on these parts of the body:
COn tanned skin. Refer to section “4.5
Exposure to the sun.
CAround or near the eyes. Use below the
cheekbones.
COn tattoos or permanent makeup, dark
brown or black spots, (such as large freckles,
moles, or warts), nipples, genitals, or lips.
CAreas with injected llers or toxins.
6
EN
Infinity EU124 0037C inside ED227-20 release.indd 6 20/03/2018 09:19:41
CA part of the body that has a history of
herpes outbreaks.
CSkin that has active eczema, psoriasis,
lesions, open wounds or infections (cold
sores), abnormal skin conditions caused by
systemic or metabolic diseases (diabetes for
example).
CAreas where you may want hair to grow
later. The results are permanent.
Additional warnings
CRemove all jewellery before use.
CNever use ammable liquids such as alcohol
(including perfumes, sanitizers, or other
applications containing alcohol), or acetone
to clean the skin before use.
CSelect the energy setting carefully. When
the energy intensity is increased, hair
removal improves, but the risk of side
eects and complications increases.
CFollow the hair and skin colour chart when
selecting energy levels to avoid the risk of
burns, blisters or changes in skin colour (see
the chart at the front of the manual).
CAlways do a spot test before you treat a
specic part of your body.
7
EN
Infinity EU124 0037C inside ED227-20 release.indd 7 20/03/2018 09:19:41
CDo not treat the same area of skin more
than once per hair removal session.
CAvoid overlapping pulses or gaps when
you treat an area.
CUse a lower energy level if you experience
mild discomfort.
CDo not expose treated areas to the sun,
and do not use energy levels 2-5 on tanned
skin or after recent sun exposure (including
articial tanning machines). Refer to section
4.5 Exposure to the sun.
CStop use immediately if you see full redness
of the skin, blistering or burns.
CStop use immediately if you have any pain.
CStop use immediately if the skin or the
device becomes too hot.
2. Safety with Silk'n Innity
With Silk'n Innity safety comes rst. Enhanced Home Pulsed Light™ (eHPL)
technology provides superior safety with lower energy levels.
eHPL™ is able to achieve long-term hair removal results at a fraction of the energy
level used in other light-based hair removal equipment. The technology combines
2 energy sources: galvanic energy and optical energy. The galvanic energy enables
better penetration of the optical energy to the hair shaft by temporarily widening
the skin pores. The hair shaft absorbs the light, deactivates the hair follicle and hair
growth is disabled.
The low energy used reduces its potential to cause harm or complications and
contributes to your overall safety.
8
EN
Infinity EU124 0037C inside ED227-20 release.indd 8 20/03/2018 09:19:41
Silk'n Innity protects your skin
Light-based hair removal is not suitable for tanned skin. Silk'n Innity comes with
a built-in skin colour sensor that is designed to measure the complexion of the
applied surface and enables energy levels according to skin complexion.
Furthermore, the treatment surface, through which pulses of light are delivered,
is recessed inside the device. This enables Silk'n Innity to protect your skin by
avoiding direct contact between the treatment surface and the skin.
Silk'n Innity protects your eyes
Silk'n Innity has a built-in safety feature for eye protection. It has been designed so
that a light pulse cannot be emitted when the treatment surface is facing open
air. The safety feature enables treatment only when the treatment surface is in
contact with the skin.
3. Get to know your Silk'n Innity
Silk'n Innity is a powerful electrical device and should be used with special
attention to safety. Before use, it is important that you read and understand
the instructions on how to use the device including after-use procedures,
and follow them strictly. We recommend you familiarise yourself with the
instructions in this manual before each treatment session.
3.1 Package contents
Package contents vary according to the option purchased.
Innity items
ySilk'n Innity device
yAdapter
yUser manual
yWarranty card
yBeauty case
Silk’n Innity with Body Lotion: Includes the Innity items plus Body Lotion.
Silk’n Innity with Cleansing Box: Includes the Innity items plus the Silk’n
Cleansing Box to disinfect your device.
3.2 Device description
Silk'n Innity is a home-use device using eHPL™ technology for the removal
of unwanted hair. The device has a treatment surface and a pulse button. It
also has a pair of electrodes, base and touch, for creating and utilizing a galvanic
treatment circulation. Refer to the diagram at the front of the manual to see the
location of each feature.
9
EN
Infinity EU124 0037C inside ED227-20 release.indd 9 20/03/2018 09:19:41
1. Pulse button
2. Treatment surface
3. Skin colour sensor
4. Bluetooth indicator light
5. Energy level indicator lights
6. Control button
7. Ready/Skin tone warning indicator light
8. Base electrode
9. Touch electrode
3.3 Intended use
Silk'n Innity is intended for removal of unwanted hair. The device is also intended to
eect long term or permanent hair reduction. Permanent hair reduction is dened
as a long-term stable reduction in the number of hairs regrowing after a treatment
regime. You may use the device to remove unwanted body hair. Ideal body areas
include the underarms, bikini line, arms, legs, face (below the cheekbones), back,
shoulders and chest.
Silk'n Innity is not a medical appliance. It is intended exclusively for cosmetic
treatments. The device is only intended for private use and is not suitable for
commercial or therapeutic use.
Do not use for any purpose other than as described in this manual.
4. Device controls and settings
4.1 Device controls
Refer to the diagram at the front of the manual to see the location of each control.
Control Action Function / Mode
Control button (#6)
Short press
Each press increases the energy
level. The default at start up is level
1. Cycle through the levels to get
back to 1.
Pulse button (#1) Short press Triggers a light pulse.
Touch electrode (#9) Short press Triggers a light pulse when pressed
together with the pulse button.
Energy level indicator
lights (green) (#5) Constant The number of lights indicates the
energy level.
10
EN
Infinity EU124 0037C inside ED227-20 release.indd 10 20/03/2018 09:19:41
Control Action Function / Mode
Ready/skin tone warning
indicator light (green) (#7)
Constant Device is ready for use.
Blinks rapidly Skin tone is too dark for safe use. No
light pulses are emitted.
Bluetooth indicator light
(blue) (#4) Blinks Bluetooth is active.
4.2 Skin colour sensor
Light-based hair removal on darker skin tones may result in adverse eects
such as burns, blisters, and skin colour changes (hyper- or hypo-pigmentation).
Silk'n Innity has a skin colour sensor that detects the colour of your skin
automatically. The skin colour sensor checks your skin colour at the start of, and
occasionally during, each treatment.
aIf you see no light pulse and the ready/skin tone warning indicator light
blinks rapidly, this is an indication that your skin tone, measured by the skin
colour sensor, is too dark for safe application. Try using the device on a
dierent part of your body.
4.3 Energy levels
The energy level determines the intensity of the light pulse delivered to your
skin. As the energy level increases, so do hair removal results, as well as the risk of
possible side eects and complications.
UThe device has 5 levels of energy from 1 (the lowest) to 5 (the highest),
represented by 5 energy level indicator lights.
UWhen the device is turned on, the energy level is set to level 1 automatically.
Only one energy level indicator light will be on.
UTo change the energy level, press the control button repeatedly to
increase the energy level from 1 to 5. Once at level 5, press the control
button again to reduce the energy level from 5 back to 1.
11
EN
Infinity EU124 0037C inside ED227-20 release.indd 11 20/03/2018 09:19:41
4.4 Pulsing and gliding
Pulsing is the best technique for treating specic spots or small areas.
UPress the treatment surface against your skin. Work in rows (either across
or down as shown in the image). Start at one end of each row and progress
to the other end.
UThe treatment surface creates temporary pressure marks on the treated
area so you can see areas you have treated.
UAfter each pulse, move the treatment surface to the next spot. Keep
doing this pulsing action for the area you are treating.
UAvoid gaps or overlaps as you use the device.
Gliding is the best technique for treating larger parts of the body.
Press the treatment surface rmly against your skin and slowly glide over your
skin (either across or down as shown in the image). Make sure that the treatment
surface is always touching your skin.
UAt lower energy levels, the device takes only 1-1.5 seconds to recharge
between pulses. This generates a nonstop sequence of ashes.
UGlide at a speed so that you avoid gaps or overlaps.
CDo not treat the same area of skin more than once per hair removal session.
CStop use immediately if you have any pain.
4.5 Exposure to the sun
UThe lowest energy level (1) is designed for safe use even after sun exposure.
UIf you use energy levels 2-5, avoid further exposure to the sun for 4 weeks
before and 2 weeks after your treatment. This is because higher
quantities of melanin expose the skin to greater risk when using any
method of light-based hair removal. This applies to all skin types, even
those that don’t seem to tan quickly.
12
EN
Infinity EU124 0037C inside ED227-20 release.indd 12 20/03/2018 09:19:41
UWe don’t advise it, but if you have to go out in the sun after a treatment, be
sure to apply sunscreen SPF30 or higher to the treated area. Do this for 2
weeks after a treatment.
4.6 Exposure of pulsed light to the eyes
UAlthough you can use the device to treat facial hair, take extra care to avoid
contact with the eyes, and use only below the cheekbones.
aThe device will only emit repeated pulses when it is in rm contact with your
skin, and you keep moving it across your skin.
5. What to expect with Silk'n Innity
During a Silk'n Innity treatment session it is normal to experience and feel:
UA fan noise: The cooling fan makes a noise similar to that of a hair dryer.
UA pop sound with each pulse: When a pulse of eHPL™ light is activated, it
is normal to hear a subtle pop sound simultaneously with the ash of light.
UA sensation of warmth and tingling: During each galvanic pulse
sequence it is normal to feel a mild sensation of warmth and tingling from
the galvanic and light energies.
USome mild red or pink colour: During and just after your treatment
session it is not uncommon to see some very mild, pink-like colour of the
skin. This is usually most noticeable around the hairs themselves.
CStop use immediately if you see full redness of the skin, blistering or burns.
6. Possible side eects
When used according to the instructions, side eects and complications associated
with the use of Silk'n Innity are uncommon. However, every cosmetic procedure,
including those designed for home use, involves some degree of risk. Therefore, it
is important that you understand and accept the risks and complications that can
occur with pulsed light hair removal systems designed for home use.
13
EN
Infinity EU124 0037C inside ED227-20 release.indd 13 20/03/2018 09:19:41
Minor skin discomfort
Home pulsed light hair removal is generally well-tolerated. However, some users feel mild
discomfort during use. This is best described as a mild stinging sensation on the treated
skin areas. The stinging sensation may last during or after treatment.
This means that you should use the device at a lower energy level, and if that doesn't
help, you should stop using the device.
Skin redness
Your skin may become red immediately after using the device or within 24 hours.
Redness generally clears up within 24 hours.
See your doctor if redness does not go away within 2 to 3 days.
Make sure you use the energy level that is comfortable for you and suitable for your skin
colour.
Increased sensitivity of the skin
The skin of the treated area is more sensitive so you may encounter dryness or aking
of the skin.
Pigment changes
The device targets the hair shaft, in particular the pigmented cells in the hair follicle
and the hair follicle itself. Nevertheless there is a risk of temporary hyper-pigmentation
(increased pigment or brown discolouration) or hypo-pigmentation (whitening) to the
surrounding skin. Risk of changes in skin pigmentation is higher for people with darker
skin tones or heavily tanned skin. Usually discolouration or changes to skin pigment are
temporary, and permanent hyper-pigmentation or hypo-pigmentation are rare.
Excessive redness and swelling
In rare cases, treated skin may become very red and swollen. This is more common in
sensitive areas of the body. The redness and swelling should subside within 2 to 7 days
and should be treated with frequent applications of ice. Gentle cleansing is OK, but
avoid exposure to the sun.
Blisters or burns
Cool the aected area and apply anti-burn cream. Wait until the area has healed
completely before another treatment, and use a lower energy level. If the skin does not
return to normal within 3 days, consult your physician.
aStop use immediately if any of these eects are more severe.
aSee your physician if the eects do not go away within 2 to 3 days.
14
EN
Infinity EU124 0037C inside ED227-20 release.indd 14 20/03/2018 09:19:41
7. Treatment plan
A typical full hair growth cycle may take 18-24 months. During this time multiple
Silk'n Innity treatment sessions may be required in order to achieve permanent
hair removal.
The eciency of hair removal varies from person to person according to body area,
hair colour and how the device is used.
Typical treatment plan during a full hair growth cycle:
UTreatments 1-4: Plan two weeks apart.
UTreatments 5-7: Plan four weeks apart.
UTreatments 8 +: Treat as needed, until desired results are achieved.
Expected treatment outcome for hair removal
Fitzpatrick
skin type
Hair
colour
Light
uence
[J/cm2]
Area of
the body²
Average number
of treatments1
% Hair
reduction
I-IV
Light
brown
to
brown
2.5-4
Lower or upper
legs
Session 10-12,
approx. four weeks
apart.
60%
Arms 50%
Bikini Line 60%
Underarms 55%
I-IV Brown
to black 2.5-4
Lower or upper
legs
Session 8-10,
approx. four weeks
apart.
70%
Arms 60%
Bikini Line 70%
Underarms 65%
1. Individual response depends on hair type as well as biological factors that may
aect hair growth patterns. Some users may respond quicker or slower than the
average number of treatments.
2. One cannot expect permanent hair removal in a single or even double treatment
sessions. The duration of the resting period for hair follicles also depends on the
body area.
15
EN
Infinity EU124 0037C inside ED227-20 release.indd 15 20/03/2018 09:19:42
8. Get started!
8.1 Connect the device
1. Remove the device and other components from the box.
2. Place the adapter cable into the device and connect to the electricity
supply. All the energy level indicator lights will go on and o repeatedly
in a circular motion.
8.2 Do a spot test
Its important to do a spot test on each part of the body you wish to treat. A spot
test checks that the skin colour is suitable for treatment, and that you know which
energy level is comfortable for the area you are treating. Both skin colour and
energy level may vary depending on the target treatment area.
1. To do a spot test, follow steps 1-5 and 7-9 in the next section.
2. Continue testing at increased energy levels until you have reached the
highest level that you feel comfortable with. If within one hour you
experience no adverse eects, you can start your full treatment at that
energy level.
3. Repeat the spot test for each area you wish to treat.
8.3 Treatment steps
1. Remove all jewellery before use.
2. Before treatment, the skin should be shaved, clean, dry and free of any
powders, antiperspirants or deodorants. Do not wax, pluck or tweeze the
hair out.
3. Be sure to cover up tattoos, moles, warts or other marks on the skin that
should not be treated. Use a material that does not absorb the light such as
a white cloth or white medical tape.
4. Press the control button. The device will turn on, the level 1 energy level
indicator light will be on, and a fan sound will start.
5. Approximately 1 second after pressing the control button, the ready/skin
tone warning indicator light (green) will turn on. The device is now ready
for you to trigger the rst pulse at the lowest energy level. Always start at
energy level 1 for your rst treatment.
6. Select the energy level you are most comfortable with.
16
EN
Infinity EU124 0037C inside ED227-20 release.indd 16 20/03/2018 09:19:42
7. Place the treatment surface on the skin and press the pulse button
to deliver one pulse. Make sure your hand touches the base electrode
together with the pulse button.
aIf you do not make hand contact with the base electrode no
galvanic treatment circulation will be emitted.
8. Press the pulse button.
yThe device rst determines the skin colour. If the skin colour is
light enough for safe application, the device will activate the
galvanic circulation. You might feel a slight tingling sensation. This
is completely normal. The galvanic treatment works to enlarge your
pores for a better application of the treatment.
yDirectly afterwards, the device will ash a pulse of light onto your
skin, and the ready/skin tone warning indicator light will turn
o. You will see a bright ash of light and simultaneously hear a
popping sound, which is a normal noise for the device. You will feel
a mild sensation of warmth and tingling. The device will immediately
recharge for the next pulse.
yAfter a few seconds the ready/skin tone warning indicator light
will turn on again and start blinking slowly when pressed against the
skin.
9. Remove the treatment surface from the treated area of skin.
10. Decide if you wish to treat the area by Gliding or Pulsing (see section “4.4
Pulsing and gliding”).
yIf you are Pulsing, place the treatment surface on an adjacent part
of your skin, and trigger a pulse.
yIf you are Gliding, hold the pulse button down continuously and
slide the device smoothly along the treated area.
11. Keep Pulsing or Gliding until you have covered the target area.
aTry to avoid gaps or overlaps.
CIf your skin blisters or burns, stop use immediately.
12. When you have completed your treatment, long press the control button,
to switch o the device. Remember the last energy setting you used
because the device always starts up at energy level 1.
13. Disconnect the adapter from the electricity supply, then clean the device
and store safely (see section “9. Cleaning and maintenance”).
17
EN
Infinity EU124 0037C inside ED227-20 release.indd 17 20/03/2018 09:19:42
14. After your treatment session we recommend you apply a body lotion to the
treated area to help your skin recover from the treatment faster.
9. Cleaning and maintenance
UUnplug the device.
UTo clean the device including the treatment surface, wipe with a clean, dry
cloth. Never use acetone or other abrasive uids, because they will damage
your device.
UAfter cleaning, we recommend you store the device in its original box and
keep it away from water.
CNever immerse the device or any of its parts in water.
10. Connect your Silk'n Innity to Bluetooth
Download and connect to Silk’n hair removal app.
The free Silk’n Hair Removal application supports your every step with Silk’n hair
removal devices, creates your personalized treatment plan, helps you make the
safest and most informed choices, and makes sure you follow through the entire
course of treatment for best results.
As a Silk'n Innity owner you can also enjoy Bluetooth connectivity. Just download
the application and follow the registration process and Bluetooth pairing steps.
For a free download of the Silkn hair removal app, scan:
11. Troubleshooting
Only authorized personnel are permitted to perform repairs. Do not attempt to
modify, open or repair the device. You may expose yourself to dangerous electrical
components and may cause serious harm to yourself. It will also void the warranty.
18
EN
Infinity EU124 0037C inside ED227-20 release.indd 18 20/03/2018 09:19:42
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300

Silk'n SILK'N INFINITY SMOOTH IPL HÅRFJERNINGSSETT Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à