MAXHUB UCS10 Manuel utilisateur

UCS10
Marque
MAXHUB
Modèle
UCS10
Taper
Manuel utilisateur
Integrated video conference terminal
User Manual
Note：The product images are for illustrative purposes only and may
slightly differ in appearance, colour, size, etc. from the actual product.
❖ Safety Warning and Precautions
Before using and operating this device, please read thoroughly and
comply with the following precautions in order to prevent accidents or
abnormal operation.
1) Operating Environment
➢ Do not place the product in dusty and humid environments in case
of internal short circuit.
➢ Do not place the product near heating devices(such as electrical
heater).
➢ Operating temperature is 0-40℃, operating humidity is
10%-90%RH. Please use the product accordingly.
2) Children Safety
The product and accessories may contain some small parts. Please keep
them from children to avoid accidental swallowing or danger.
3) power supply
Please use the standard power adapter.
4) Keep Dry
The product is NOT waterproof.Please keep it dry.
5) Maintenance
➢ Please contact technical support for maintenance services.
➢ Do NOT insert any sharp or pointed object into the device.
➢ Prevent the device from falls and collisions with other
objects,which may cause damages.
❖ Statement
1) Intellectual property right statement: The patents cover the
hardware design and software of this product. Anyone reproduces
the product or the contents of this instruction without prior written
permission from the Company shall be liable to legal prosecutions.
2) The description, illustrations, etc. in this document may subject to
change per the latest product specification and performance.
3) The product images are for illustrative purposes only and may
slightly differ in appearance, colour, size, etc. from the actual
product.
4) The Company reserves the rights to improve and change the
appearance and design of the product without notice.
Note: Users may find the type approval code of this product on the
product’s nameplate.
❖ Accessories introduction
Please check the following items in the product box：
⚫ HDMI cable x1
⚫ Wall-mounted components x1
⚫ USB cable ×1
⚫ Power adapter ×1
⚫ Battery ×2
⚫ Remote control x1
⚫ Peeping cover x1
⚫ Warranty card ×1
⚫ User Manual ×1
⚫ Quick Use Guide ×1
1. Product Function
Please familiarize yourself with the interface and buttons of the device
before using this device.
1) HDMI OUT：Connect to the devices with HDMI input function
2) POWER ：Tap to enter energy-saving,press and hold for at least
2 seconds to enter standby mode
3) AUX IN/OUT：Used for external audio equipment
4) 3.0：USB 3.0,used for upgrading and connecting with external
mouse/keyboard
5) LAN：Connect RJ45 terminals
6) 2.0：Device,can be connected to a computer through a USB
Type-A to Type-C data cable, providing the computer with camera,
microphone and speaker
7) DC：Used for 12V power input power supply
8) Camera：Shooting performance
9) Hanging components
2. Mounting
1) Placed directly on the desktop.
2) Wall-mounted： Fix the bracket onto the wall with screws, then
place the integrated video conferencing terminal onto the bracket.
Integrated video conferencing terminal
3) Use with tablet：Fix the bracket onto the supporting bracket with
screws, then place the integrated video conferencing terminal onto the
bracket.
Note: The connection of different samples may slightly differ. Please
refer to the actual product.
3. Quick Start
1) Please use HDMI cable to connect this product to the monitor.
2) To turn on the device, press the power button on the back of the
product or use remote control.
3) For the first use, please complete the network connection and
device activation during device boot.
4) After successful activation, this product function would be fully
functional.
❖ Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
❖ FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20cm between the radiator
and any part of your body.
❖ Non-modification Statement:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
❖ IC Radiation Exposure Statement for Canada
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two
conditions:
1.This device may not cause interference.
2.This device must accept any interference, including interference that
may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil
est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
1.L’appareil ne doit pas produire de brouillage;
2.L’appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment complies with ISED RSS-102 radiation exposure limits
set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between the
radiator and any part of your body.
Pour se conformer aux exigences de conformité CNR 102 RF
exposition, une distance de séparation d'au moins 20 cm doit être
maintenue entre l'antenne de cet appareil ettoutes les personnes.
The device for operation in the band 5150–5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel
mobile satellite systems
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont
réservés uniquement pour une utilisation à l’intérieur afin de réduire les
risques de brouillage préjudiciable aux systèmes de satellites mobiles
utilisant les mêmes canaux.
  • Page 1 1
  • Page 2 2

MAXHUB UCS10 Manuel utilisateur

UCS10
Marque
MAXHUB
Modèle
UCS10
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents