Wuhan Jingchen Intelligent ldenticationTechnology Co., Ltd.
Suppo Email : se[email protected]
Ocial Website : www.niimbot.net
Office Address : Creative Workshop No. 5, Creative World,Yezhihu West
Road,Hondshan District,Wuhan,China
Production Address : No. 1, Tianyang Road, Chuanlong Avenue, Hengdian
Street, Huangpi District, Wuhan City, Hubei Province, China
Notice: If the device cannot be turned on, please charge for one hour.
NIIMBOT is a brand under Wuhan Jingchen Intelligent ldentication Technology Ltd.
© 2022 NIIMBOT. All rights reseed.
NIIMBOT B21S
Sma Label Printer
Quick Sta Guide
Package Contents
01
Sma Label Printer *1
USB Type-C Cable *1 Quick Sta Guide *1
Label Paper Roll *1
01 · 02
Installation
02
Danger! Beware of shape blade when the paper compament is open.
Press down the crank handle on the left side of the device to
open the paper compament.
1
Push the paper compament bae to both sides and t the
label paper roll down into the compament.
2
Crank Handle
Print Side
Paper Compament Bae
Fit the label paper into the
compament with the print
side facing down.
Tear-o Blade
Close the paper compament cover and long-press the power
button to switch on the device.
3
Power Button
Indicator Light
You can download and install "NIIMBOT" Desktop version from
our ocial website (www.niimbot.com).
02.Download Desktop Version
01.Download App
03 · 04
Installing App
03
Before using the printer, please install the NIIMBOT app from
Google Play or the App Store.
1
Get the NIIM app for more label designs for homes.
2
Design & Print APP
easy to download and use
NIIM
Design & Print APP
easy to download and use
NIIMBOT
More information available on the NIIMBOT app.
Sign in to NIIMBOT Help Center HardwareMe
After connecting, tap on "Current label template" on the
Home tab to enter the label editor.
3
On Home, tap Connect sma label printer. Then select device
model.
2
Notice: If a PIN code is required, input 0000 or 1234.
Connecting and Printing
04
Images of products, accessories, and the app in this manual are
for illustrative purposes only and may be dierent from actual
products. Products are subject to change without prior notice.
Special Notes
NIIMBOT Turn on Bluetooth
Open NIIMBOT app and turn on Bluetooth on your phone.
1
Basic Functions
05
Function Operation
Switch on
Switch o
Print histo
Hold down the Power button for three seconds.
Hold down the Power button for three seconds when
the device is on.
Press the Power button once when the device is on.
Print a test page Double-press the Power button when the device is on.
05 · 06
Indicator
Blue
Blue
Green
Green
Blinking
Solid
Blinking
Blinking
Solid
Solid
Status
Hardware upgrading
Standby
Printing
Bluetooth connected
Description
Red
Red
Charging
Paper compament open/
Out of paper/Paper exit error
LED Indicators
06
Product Label Printer Model NIIMBOT B21S
Dimensions 130*94*61mm Weight 299g
Charging Time 3 - 4 hours Input
Batte Capacity 1500mAh Thermal printing
5V DC, 1A
Printing Method
Printing
Resolution Printing Width
Connectivity Charge
Transmit Power Operating
Temperature
203dpi 20-48mm
Bluetooth、Type-C Type-C
4dBm(Maximum) 5~40℃
Specications
07
07 · 08
Don't disassemble the product
without authorization.
Disassembled products cannot
be returned or exchanged.
Do not wipe the product with
corrosive chemicals or cleaning
agents.
Do not use the product
near places with ammable
products such as gas stations
or fuel depots.
Safety Precautions
08
Please read all the instructions and warnings in this manual carefully
before using this product to ensure the proper functioning of the
device and your safety.
Please keep the product and accessories out of the reach of children or
they must be used under the supeision and guidance of a guardian;
Turn o the power immediately when water gets into the product;
Turn o the power immediately in case of any product malfunction;
If you want to use a power adapter, always use one that is safe,
regulato-compliant, and compatible;
Do not disassemble the product to replace the batte. Improper operation
may cause an explosion;
1.
2.
3.
4.
5.
*Warnings
The batte contains special protection circuit and device, please do not
disassemble the batte without authorization, otherwise it may cause a
sho circuit or leakage. If electrolyte gets into your eyes, ush with water
immediately and seek medical help;
Do not expose the product and the power adapter to high temperature
or high humidity. Do not put them in water, otherwise a sho circuit may
occur and the batte may heat up, smoke, deform, damage, or even explode;
If smoke or smell comes from the product or the power adapter, please
unplug the power adapter immediately and avoid any burns.
6.
7.
8.
09 · 10
FCC Statement
This device complies with pa 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful inteerence,
and (2) this device must accept any inteerence received, including inteerence
that may cause undesired operation.
Any changes or modications not expressly approved by the pay responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Pa 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful inteerence
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful inteerence to radio communications.
However, there is no guarantee that inteerence will not occur in a paicular
installation. If this equipment does cause harmful inteerence to radio or
television reception,which can be determined by turning the equipment o
and on, the user is encouraged to t to correct the inteerence by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
Related Statements
09
11 · 12
Declaration of conformity
Hereby, Wuhan Jingchen Intelligent Identication Technology Co., Ltd. declares
that this device is in compliance with the essential requirements and other
relevant provisions of Radio Equipment Directive (RED) 2014/53/EU. This
product can be used across EU member states. This device can be used in
European Union.
Hereby, [Wuhan Jingchen Intelligent Identication Technology Co., Ltd.]
declares that the radio equipment type [NIIMBOT B21S] is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address:http://www.niimbot.com.
Canadian Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause inteerence.
(2) This device must accept any inteerence, including inteerence that may
cause undesired operation of the device.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.The
device can be used in poable exposure condition without restriction.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d' en compromettre le fonctionnement.
13 · 14
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
