Package Contents
Product Description
02
01
Operation Instructions
03-1 Basic Functions
03-2 Fitting Paper
03
Installing App
04
Package Contents
Product Description
Operation Instructions
Installing App
Connecting and Printing
01
02
03
04
05
Maintenance
Safety Precautions
Specications
06
07
09
08
Related Statements
CONTENTS
Before using this product, please download the “NIIM” APP
rst. You can download it from Google Play or Apple Store.
For more product use instructions, please refer to “NIIM” APP.
| THE SIMPLER THE BETTER
| THE SIMPLER THE BETTER
| THE SIMPLER THE BETTER
| THE SIMPLER THE BETTER
| THE SIMPLER THE BETTER
Indicator
Green
Green
Red
Red
Solid
Blinking
Solid
Solid
Blinking
Blinking
Status
Device Connected
Printing
Device Malfunction/Out of Paper
Charging
Description
Indicator
Blue
Blue
Device Turned on
Firmware Upgrading
Function Operation
Switch on
Switch o
Print histo
Hold down the Power button for three seconds.
Hold down the Power button for three seconds when the
device is on.
Press the Power button once when the device is on.
Print a test page Double-press the Power button when the device is on.
Design & Print APP
easy to download and use
NIIM
Sign in to NIM Help Center HardwareMe
Please read the manual carefully before using this product.
Sma Label Printer *1 Label Paper Roll *1
Quick Sta Guide *1
USB Type-C Cable *1
Life-healing Manual *1
Charging Po
Opening Lever
Power Button
Indicator Light
Press down the opening lever to open the paper
compament.
1
Fit the print paper into the compament with the print
side facing up, and the rst label paper sticking out of
the tear-o opening.
2
Close the paper compament cover. Press and hold the
power button for three seconds to turn on the device.
3
Power Button
Paper Exit
Print Side
Opening Lever
NIIMBOT H1
Sma Label Printer
USER MANUAL
| THE SIMPLER THE BETTER
Connecting and Printing
05
Maintenance
06
Power Adapter
Type-C Po
USB Cable
Please clean the print head and roller if one of the following
situations occurs:
⑤ Wait for 5-10 minutes for the alcohol to fully evaporate,
and then close the paper compament.
① Switch o the power of the printer;
④ Use an alcohol cotton swab (should be d) or a print head
cleaning pen to wipe the dust or stains o the print head.
③ Rotate the roller and use an alcohol cotton swab (should
be d) to wipe the dust and stains o its suace;
② Slide open the paper compament and nd the print head
(refer to the picture). Wait for the print head to cool down
completely if you have recently printed;
Clean the print head and roller in the following procedures:
Notices
① Make sure the device is switched o during cleaning;
③ Do not use gasoline, acetone or other organic solvents
to clean the print head or the roller;
④ Wait until the alcohol completely evaporates before
switching on the power to continue printing;
⑤ Always keep the suace of the sensor clean.
② Avoid touching the print head with hand or metal objects;
do not scratch the print head, the roller or the suace
of sensor with tools such as tweezers;
Open your NIIM APP, and turn on Bluetooth according to
instruction.
1
Notice: If a PIN code is required, input 0000 or 1234.
Turn on Bluetooth
8�30
NIIM
06-1 Charging
06-2 Cleaning Print Head and Roller
06-3 FAQs
Make sure the product and your hands are d; plug the USB
Type-C cable into the charging po, connect it to the power
adapter (purchased separately), and turn on the power.
The batte needs 2-3 hours to be fully charged.
At least charge the batte once eve 2 to 3 months to
ensure its normal function.
Q：What to do if the Bluetooth connection fails?
A：1. Resta the device or the App and then search again;
Q：What to do if my search cannot nd the printer?
A：1. Make sure your phone’s Bluetooth is turned on;
2. Resta the device or the App and then search again;
2. Turn o the Bluetooth on your phone and then turn it
on again.
3. Turn o the Bluetooth on your phone and then turn it
on again.
2. Press the power button once and print one page, and
then print again;
2. Check if the label paper or the thermal transfer ribbon
is used up. Replace them if they are used up.
2. Adjust the print oset via the editing function in the App.
2. Check if the size of the label paper ts the template size
in the App;
4. If all above are ruled out, then it’s the malfunction of the
probe; please contact our suppo team.
3. Check if the paper type of the setup template is correct;
3. Double-press the power button to print a test page,
and then send a picture of the test page to our suppo
team.
Q：What is a PIN code?
A：Based on the Android system, most default PIN codes
are ‘0000’; under special circumstances, they are ‘1234’
or 16 ‘0’s (0000000000000000).
Q：Do I need to enable permission to obtain location
information?
A：Due to Android’s requirement, you need to enable location
to turn on the Bluetooth.
Q：What to do if the printing is not clear?
A：1. Make sure you are using NIIMBOT label paper;
Q：What to do if I press “print” but no printing contents come
out and the printer gives a “click-click” noise?
A：1. Check if the label paper is tted properly; the label paper
should stick out 0.5cm of the device;
Q：What to do if the printing stops suddenly?
A：Address the situation as per the error notice in the App.
Q：What to do if the print oset is misaligned?
A：1. Check if the size of the label paper ts the templates in
the App.
Q：What to do if the paper doesn’t roll properly?
A：1. Check if there are label paper or foreign objects on the
sensor of the paper feeder slot;
| THE SIMPLER THE BETTER
Tap the Device Connection Button on the upper left corner
on the home page to connect to the sma label printer.
2
After the connection is complete, tap the “Painting Board”
Button at the bottom of the home page to enter the editing
page.
3
When the batte is low, the indicator light will blink red.
If you continue to print with low batte, the printer will be
switched o. Please charge the batte to continue printing.
For batte life reasons, printing while charging is not recommended.
Unclear printing.
Noise during paper rolling.
Foreign objects on the print head.
Charging Po
Print Head
Safety Precautions
07
Disclaimer
To ensure the proper functioning of the device and your safety,
please read all the instructions and warnings in this manual
carefully before using this product.
*Warning
Please keep the product and accessories out of the reach of
children or they must be used under the supeision and guidance
of a guardian;
Turn o the power immediately when water gets into the product;
Turn o the power immediately in case of any product malfunction;
If you want to use a power adapter, always use one that is safe,
regulato-compliant, and compatible;
Do not disassemble the product to replace the batte. Improper
operation may cause an explosion;
The batte contains special protection circuit and device, please
do not disassemble the batte without authorization, otherwise
it may cause a sho circuit or leakage. If electrolyte gets into your
eyes, ush with water immediately and seek medical help;
Do not expose the product and the power adapter to high
temperature or high humidity. Do not put them in water, otherwise
a sho circuit may occur and the batte may heat up, smoke,
deform, damage, or even explode;
If smoke or smell comes from the product or the power adapter,
please unplug the power adapter immediately and avoid any burns.
1.
2.
3.
4.
5.
6.
7.
8.
*Impoant
Please use NIIMBOT label paper to prevent print quality issues
or print head damage;
The product comes with a built-in rechargeable batte. Do not
throw it into re or heat it. Do not charge, use or store it in a hot
place, as this may cause overheating, re or explosion.
1.
2.
*Reminder
If you store this product for a prolonged period, please recharge
it eve 3 months, otherwise it may lead to batte failure or even
leakage, and then cause damage to the product;
Please use this product in a normal environment; high or low
temperatures may cause issues such as lower print quality.
1.
2.
| THE SIMPLER THE BETTER
Specications
08
Wuhan Jingchen Intelligent ldentication Technology Ltd. is solely
responsible for the revision and explanation of the manual, and
endeavors to ensure that the contents of the manual are correct.
Due to technology upgrades, products are subject to change
without prior notice. Images of products, accessories, and the App
in this manual are for illustrative purposes only and may be dierent
from actual products.
Special Notice
NIIMBOT is a brand under Wuhan Jingchen Intelligent ldentication Technology Ltd.
© 2022 NIIMBOT. All rights reseed.
Wuhan Jingchen Intelligent ldenticationTechnology Co., Ltd.
Suppo Email : se[email protected]
Ocial Website : www.niimbot.com
Oce Address : Creative Workshop No. 5, Creative World,Yezhihu West
Road, Hongshan District, Wuhan, China
Production Address : No. 1, Tianyang Road, Chuanlong Avenue, Hengdian
Street, Huangpi District, Wuhan City, Hubei Province, China
| THE SIMPLER THE BETTER
Related Statements
09
| THE SIMPLER THE BETTER
Don't disassemble the product
without authorization.
Disassembled products cannot
be returned or exchanged.
Do not wipe the product with
corrosive chemicals or cleaning
agents.
Do not use the product
near places with ammable
products such as gas stations
or fuel depots.
Product Label Printer Model NIIMBOT H1
Dimensions 106*40*64mm Weight 160g
Charging Time 2 - 3 hours Input
Batte Capacity 1000mAh Thermal printing
5V DC, 1A
Printing Method
Printing
Resolution Printing Width
Connectivity Charge
Transmit Power Operating
Temperature
203dpi 12mm
Bluetooth 5.2 Type-C
4dBm(Maximum) 5℃ - 40℃
THE SIMPLER THE BETTER
FCC Statement
This device complies with pa 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful inteerence, and (2) this device must accept
any inteerence received, including inteerence that may cause
undesired operation.
Any changes or modications not expressly approved by the
pay responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Pa 15
of the FCC Rules. These limits are designed to provide reasonable
protection against harmful inteerence in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful inteerence to radio
communications.
However, there is no guarantee that inteerence will not occur
in a paicular installation. If this equipment does cause harmful
inteerence to radio or television reception,which can be
determined by turning the equipment o and on, the user is
encouraged to t to correct the inteerence by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
The device has been evaluated to meet general RF exposure
requirement.The device can be used in poable exposure
condition without restriction.
Declaration of conformity
Hereby, Wuhan Jingchen Intelligent Identication Technology
Co., Ltd. declares that this device is in compliance with the
essential requirements and other relevant provisions of Radio
Equipment Directive (RED) 2014/53/EU. This product can be
used across EU member states. This device can be used in
European Union.
Hereby, [Wuhan Jingchen Intelligent Identication Technology
Co., Ltd.] declares that the radio equipment type [NIIMBOT H1]
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
the following internet address:http://www.niimbot.com.
Canadian Statement
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause inteerence.
(2) This device must accept any inteerence, including inteerence
that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d' en compromettre
le fonctionnement.
-
1
-
2
-
3
