Titan HGC702000 TALI 3-IN-1 VPD Sensor Manuel utilisateur

Titan
Marque
Titan
Modèle
HGC702000 TALI 3-IN-1 VPD Sensor
Taper
Manuel utilisateur
TM
MC
titancontrols.net
This device complies with Part 18 of the FCC Rules.
This product may cause interference to radio equipment and should not be installed near
maritime safety communications equipment or other critical navigation or communication
equipment operating between 0.45 -30 MHz. A simple measure to correct interference
is to add ferrites to the ends of lengths of communication cables.
Scan for the most up-to-date instructions.
Manufactured for Hawthorne Hydroponics LLC,
a subsidiary of The Hawthorne Gardening Company,
800 Port Washington Blvd, Port Washtington, NY 11050
HawthorneGC.com | Canada:HawthorneGC.ca
©2022. World rights reserved.
220816at LB20136 Version 2
titancontrols.net
ATTENTION INSTALLING PERSONNEL
Prior to installation, thoroughly familiarize yourself with this Installation Manual.
Observe all safety warnings. During installation or repair, caution is to be observed.
It is your responsibility to install the product safely and to educate the customer on its safe use.
TALI
3-IN-1 VPD SENSOR
Product #HGC702000
Instruction Manual
TM
MC
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
CE SYMBOLE DÉNOTE UNE MESURE DE PRÉCAUTION.
Black
Magenta
Cyan
Yellow Die
Steve Turmell
Titan Controls Tali 3 in 1 Sensor VPD (Standard) 12 - Instruction Guide
HGC702000-01
LB20136
131925
Katie Winkler
Insert/Leaet
125g Copper Paper
PT_120mm x 175mm
08/17/2022
175 x 120
HGC702000-01_LB20136_TitanControls_Tali3in1SensorVPD_Instructions_220816.ai
4
32
000
000
000
Oset
Wuhan Ruibo Hengxing Paper Packing
Co. , Ltd., Wuhan, HUBEI PROVINCE
6
THIS PAGE PRINTS AT 00% REDUCTION OF THE ORIGINAL LABEL TO FIT ON 11” x 17” PAGE
2
OBF Project #:
OBF Job #:
Wave: 849969000689
UPC #:
UPC SIZE: -
UPC BW:
SKU #:
Component #:
2 3
Installation
1. Install sensor(s) into desired positions following the recommended method (see
installation method)
2. Once the sensor(s) has been put into position, connect the sensor cable to the
controller (see connecting to EL3)
3. After your sensor(s) have been connected to the EL3, you will be able to locate them
on the “Sensor List” screen
A. All sensors will default to the “Zone A” grouping. This can be changed
by selecting a sensor and tapping on the icon. From here you can
switch between “Zone A” and “Zone B”
B. You can also select which sensor you want to be the “default” sensor
that is shown on the home screen, by tapping on the sensor card and
check “Home page display”
Tali 3-in-1 VPD Sensor – Overview
Thank you for purchasing the Titan Controls Tali 3-in-1 VPD sensor.
Before use, please check if the HGC702000-VPD sensor is in good condition.
We recommend that you read the HGC702000-VPD manual carefully before installation.
This sensor is designed to monitor the temperature, humidity and air pressure in your
growing environment. From these readings, the sensor will be able to calculate your VPD
(vapor pressure deficit).
Understanding the VPD level in your room will help you to optimize your plant’s growth.
In the process of growing, your plant absorbs water, nutrients, and carbon dioxide from the
atmosphere through transpiration. If the transpiration is too strong, the water absorption rate
of the root system will not keep up with the evaporation rate and the plant will lose water and
wilt. On the other hand, too little water evaporation will cause the soil moisture to be too
high, which will not allow oxygen to circulate. This will cause the roots to be blocked, which
results in reduced nutrient and carbon dioxide intake. Keep the plant’s transpiration within a
good range to get the best growth. For the procedures of planting, cutting, grafting, and
transplantation, maintaining excellent transpiration is the key to maintaining a healthy plant.
TM
MC
WARNING: Misuse or improper protection installation may damage the sensor and may
invalidate the manufacturer’s warranty. To integrate the Titan Controls Tali VPD sensor
into your system, please follow the recommended installation instructions and be
equipped with appropriate protection devices to protect the sensor from damage.
If installing a sensor in a lightning-prone area with a grounded data logger, please refer
to the application note Lightning Impulse and Grounding Practices.
AVERTISSEMENT: L’utilisation non conforme ou l’installation inadéquate de protections
peut endommager le capteur et peut annuler la garantie du fabricant. Pour intégrer le
CapteurDH Tali Titan Controls à votre système, veuillez suivre les consignes
d’installation recommandées et utiliser les appareils de protection appropriés afin de
protéger le capteur de tout dommage. Si le capteur est installé dans une zone sujette
à la foudre avec un enregistreur de données avec mise à la terre, veuillez vous référer
à la note d’application « Choc de foudre et application des mises à la terre.
Black
Magenta
Cyan
Yellow Die
Steve Turmell
Titan Controls Tali 3 in 1 Sensor VPD (Standard) 12 - Instruction Guide
HGC702000-01
LB20136
131925
Katie Winkler
Insert/Leaet
125g Copper Paper
PT_120mm x 175mm
08/17/2022
175 x 120
HGC702000-01_LB20136_TitanControls_Tali3in1SensorVPD_Instructions_220816.ai
4
32
000
000
000
Oset
Wuhan Ruibo Hengxing Paper Packing
Co. , Ltd., Wuhan, HUBEI PROVINCE
6
THIS PAGE PRINTS AT 00% REDUCTION OF THE ORIGINAL LABEL TO FIT ON 11” x 17” PAGE
2
OBF Project #:
OBF Job #:
Wave: 849969000689
UPC #:
UPC SIZE: -
UPC BW:
SKU #:
Component #:
4
Product Appearance
Connection
interface
2" LCD
Screen
wake
button
FrontSide
10.7mm
123.7 mm
82.3 mm 54 mm
VPD Sensor
T-connector
2X Cables
5
Top of Interface
In Box
Black
Magenta
Cyan
Yellow Die
Steve Turmell
Titan Controls Tali 3 in 1 Sensor VPD (Standard) 12 - Instruction Guide
HGC702000-01
LB20136
131925
Katie Winkler
Insert/Leaet
125g Copper Paper
PT_120mm x 175mm
08/17/2022
175 x 120
HGC702000-01_LB20136_TitanControls_Tali3in1SensorVPD_Instructions_220816.ai
4
32
000
000
000
Oset
Wuhan Ruibo Hengxing Paper Packing
Co. , Ltd., Wuhan, HUBEI PROVINCE
6
THIS PAGE PRINTS AT 00% REDUCTION OF THE ORIGINAL LABEL TO FIT ON 11” x 17” PAGE
2
OBF Project #:
OBF Job #:
Wave: 849969000689
UPC #:
UPC SIZE: -
UPC BW:
SKU #:
Component #:
Connection
interface
2" LCD
Screen wake button
Description of material and size
Cover material PC
Cover sheath PVC Cable inner core Oxygen-free copper
Dimension 83mm L x 55mm W x 122mm H
Performance parameter
Power ≤0.8W
Power supply 6 - 24V DC
Operation temperature range 32° F - 122° F
Operation humidity range ≤95%RH
Min time interval for data
reporting <8S
Interface protocol CANbus
Communication rate 50Kbps
Compliance
Function parameter
Interface protocol CANBus
Screen resolution 240*320
Accuracy
Measuring Range
Sensor Specification Accuracy
Temperature 0° C ~ 50° C ±0.5° C
Relative Humidity 0%RH ~ 95%RH ±5%RH
6 7
Connection Interface Product Parameter
UL61010-1 CSA
C22.2 #61010-1-12
FCC Part 18
Black
Magenta
Cyan
Yellow Die
Steve Turmell
Titan Controls Tali 3 in 1 Sensor VPD (Standard) 12 - Instruction Guide
HGC702000-01
LB20136
131925
Katie Winkler
Insert/Leaet
125g Copper Paper
PT_120mm x 175mm
11/17/2022
175 x 120
HGC702000-01_LB20136_TitanControls_Tali3in1SensorVPD_Instructions_221117.ai
4
32
000
000
000
Oset
Wuhan Ruibo Hengxing Paper Packing
Co. , Ltd., Wuhan, HUBEI PROVINCE
6
THIS PAGE PRINTS AT 00% REDUCTION OF THE ORIGINAL LABEL TO FIT ON 11” x 17” PAGE
3
OBF Project #:
OBF Job #:
Wave: 849969000689
UPC #:
UPC SIZE: -
UPC BW:
SKU #:
Component #:
Notes
1 Square = ____ Foot/Feet
EL3
T connector T connector T connector ≤16
VPD SensorVPD SensorVPD Sensor
Average
canopy
height
8 9
Installation Method And Connecting To EL3
Up to 16 Tali VPD sensors can be connected to the Gavita EL3.
The Titan Controls Tali 3-in-1 VPD sensor needs to be used in a ventilated environment,
and the installation position is as shown in the figure. Failure to follow the recommended
positioning may result in nonoptimal readings.
Black
Magenta
Cyan
Yellow Die
Steve Turmell
Titan Controls Tali 3 in 1 Sensor VPD (Standard) 12 - Instruction Guide
HGC702000-01
LB20136
131925
Katie Winkler
Insert/Leaet
125g Copper Paper
PT_120mm x 175mm
08/17/2022
175 x 120
HGC702000-01_LB20136_TitanControls_Tali3in1SensorVPD_Instructions_220816.ai
4
32
000
000
000
Oset
Wuhan Ruibo Hengxing Paper Packing
Co. , Ltd., Wuhan, HUBEI PROVINCE
6
THIS PAGE PRINTS AT 00% REDUCTION OF THE ORIGINAL LABEL TO FIT ON 11” x 17” PAGE
2
OBF Project #:
OBF Job #:
Wave: 849969000689
UPC #:
UPC SIZE: -
UPC BW:
SKU #:
Component #:
WARRANTY SERVICE: Please read warranty information first
If after reviewing the troubleshooting tips the unit will still not work, you should return it to the
Dealer where you purchased it. They will be able to further evaluate the unit, test various
components and possibly identify and/or fix issues. If the Dealer is unable to fix the unit, they
will return it to us for factory repair.
If there are no Dealers in your area, you may contact us directly for technical support. If we cannot
help you resolve the problem over the phone, we will issue you a RMA # (return merchandise
authorization) authorizing you to return the unit to us for factory reconditioning (if the unit is under
warranty). Contact the number below for a RMA and shipping address. Complete the form below
and include it with your unit. Also, please write the RMA # on the outside of the box.
Please package the unit in its original packaging. If damaged in shipment, we are not responsible
for the unit.
Once we receive the unit, we will repair it within 48 hours (business days) and return it to you as
freight prepaid via UPS ground shipment.
Include the following if returning directly to Titan Controls
• Proof of purchase • This completed form • RMA # on the outside of the box
Return Merchandise Authorization Number (Required)
Company Name:
Contact Name:
Address:
Phone #:
Email address:
What is the nature of the problem?
Shipping address will be given when the RMA # is issued:
www.titancontrols.net
For technical assistance, call us at 1-888-80-Titan or 1- 888-808- 4826.
Representative available Monday – Friday, 8 a.m. – 5 p.m. PST.
10 11
Warranty Information
When purchased from an authorized Hawthorne dealer, this product is covered by a
LIMITED WARRANTY available at: hawthornegc.com/warranties. You can also obtain
the Terms of Sale and Limited Warranty by calling Hawthorne toll-free at: 1-888-478-6544
or writing Hawthorne at: Hawthorne Hydroponics LLC, 3204 NW 38th Circle,
Vancouver, WA 98660, Attn: Customer Service.
Service and Repair Program
• For all service and repairs, please contact one of our Technical Service Representatives
for a Return Merchandise Authorization (RMA) number.
• Titan Controls will, at its discretion, repair or replace the sensor.
• Factory calibration services are available for all Titan Controls .
• Returning Units: Please contact your retail store for returns.
Black
Magenta
Cyan
Yellow Die
Steve Turmell
Titan Controls Tali 3 in 1 Sensor VPD (Standard) 12 - Instruction Guide
HGC702000-01
LB20136
131925
Katie Winkler
Insert/Leaet
125g Copper Paper
PT_120mm x 175mm
08/17/2022
175 x 120
HGC702000-01_LB20136_TitanControls_Tali3in1SensorVPD_Instructions_220816.ai
4
32
000
000
000
Oset
Wuhan Ruibo Hengxing Paper Packing
Co. , Ltd., Wuhan, HUBEI PROVINCE
6
THIS PAGE PRINTS AT 00% REDUCTION OF THE ORIGINAL LABEL TO FIT ON 11” x 17” PAGE
2
OBF Project #:
OBF Job #:
Wave: 849969000689
UPC #:
UPC SIZE: -
UPC BW:
SKU #:
Component #:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Titan HGC702000 TALI 3-IN-1 VPD Sensor Manuel utilisateur

Titan
Marque
Titan
Modèle
HGC702000 TALI 3-IN-1 VPD Sensor
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents