Hitachi RAR-5J1 Manuel utilisateur

– 1 –

ENGLISH

Remote Controller Manual

MODEL

RAR-5J1

Remote Controller manual Page 1~24

To obtain the best performance and ensure years of

trouble free use, please read this instruction manual

completely.

Anleitung für Fernbedienung Seite 25~48

Lesen Sie diese Bedienungsanleitung vollständig

durch, um eine optimale Geräteleistung und einen

langjährigen störungsfreien Betrieb sicherzustellen.

Manuel de la télécommande Page 49~72

Manuale del telecomando Pagina 73~96

Manual del mando a distancia

Página 97 a 120

Para obtener un rendimiento óptimo y asegurarse

muchos años de uso sin problemas, lea detenidamente

este manual de instrucciones.

Manual do Controlo Remoto Página 121~144

Leia este manual de instruções na íntegra para obter

um desempenho ideal e garantir o funcionamento sem

problemas da unidade ao longo dos anos.

 

        

    



Per ottenere il massimo delle prestazioni e garantire

un utilizzo sicuro per anni, leggere questo manuale di

istruzioni in tutte le sue parti.

       

     

     

attentivement et entièrement cette notice.

– 2 –

Transmission Indicator

The transmission indicator

ROOM TEMPERATURE

Button

Press this button to set the

room temperature. Keep

pressing and the value will

change more quickly.

STOP Button

HEAT Button

Press this button to start

heating operation.

(Page 8)

DEHUMIDIFY Button

Press this button to start

dehumidifying operation.

(Page 8)

COOL Button

Press this button to start

cooling operation.

(Page 9)

AUTO Button

Press this button to

start automatic operation.

(Page 6)

Remote controller can be used when it is fixed on a wall or pillar using the remote controller holder.

Before fixing it, make sure the indoor unit can be controlled from the remote controller fixing point.

SLEEP TIMER Operation Button

Press this button to start sleep timer

operation. (Page 20)

REMOTE CONTROLLER

T

ransmits the operation and timer settings to the indoor unit.

T

he LCD shown in the illustration below is the display immediately after the reset switch is pressed. Usually not

all the data are displayed. On the LCD shown below, the functions not available for this room air conditioner are

also displayed.

Transmission Part

Screw

Press this button to enter

(Page 11)

Press this button to start I on mist

operation.

Press this button to stop any

operation except the preset timer.

lit when a signal is sent.

ION MIST Button

(Page 10)

NAMES AND FUNCTIONS OF REMOTE CONTROLLER

POWERFUL Button

Use this button to set the

POWERFUL mode.

(Page 9)

FAN SPEED selector Button

This determines the fan speed.

ECO SENSOR Button

the eco sensor mode.

(Page )

– 3 –

ENGLISH

(When the door is open)

Starts filter cleaning operation

while the air conditioner

operation is stopped.

SET TIME Button

Use this button to set and

check the current time.

(Page 4)

TIMER Buttons

RESET Button

Press this button after the

batteries are replaced and

when the air conditioner does

not function properly. (Page )

Button

Press this button to start

(Page 12)

LEAVE HOME Button

(Page 14)

ONE TOUCH CLEAN

Button (Page 13)

FAN SPEED Button

Press this button to

select fan speed.

Five options are available:

.tneliS dna,wo L,de M ,i H ,otuA

4

COMFORT AIRFLOW

FILTER CLEAN Button

Comfort airflow operation.

VERTICAL AIRFLOW Button

Use this button to swing the

vertical air deflector or to adjust

the angle to your preference.

)51egaP(

HORIZONTAL AIRFLOW

Button

Use this button to swing the

horizontal air deflector or

to adjust the angle to your

)61egaP(.ecnereferp

(Page 2

(Page 

(Page )

– 4 –

Address

PREPARE THE REMOTE CONTROLLER

Install the batteries.

Use two AAA-size batteries.

Set the current time (Ex: set to 13:30 )

RESET

1

2

Press the (TIMER) button to adjust to the current time.

You can fast forward the time by continuously pressing the

button.

Confirm the current time

Press the

(CLOCK) button to check the current time

(The time display disappears 3 minutes later). If necessary,

readjust the time following the above procedure 1 and 2 .

Address selector switch is used to prevent

remote controller signal interference in such

circumstance where 2 indoor units are used in

the same room. This switch is not usually used.

(The factory setting is at “A” side.)

For this setting, please make an inquiry to your

sales agent.

Address selector

switch

Switch lever

Remote controller

backside

Do not operate by yourself.

Push mark

and pull.

ABOUT ADDRESS SELECTOR SWITCH

Time is incremented

Time is decremented

Press

(CLOCK) button to set the current time.

is lit instead of

blinking. It automatically goes

off in 10 seconds.

1

2

Open the cover and press the RESET

button with a sharp tip item.

3

18:88 lights up on the current

time display and start

blinking.

CAUTION

1. Do not mix new and old batteries, or

different type of batteries together.

2. Remove the batteries when you do

not use the remote controller for 2 or 3

months.

– 5 –

ENGLISH

噝 Point the remote controller to the signal receiver of the unit

Signal reception distance is approximately 7m in front of the unit.

However, this distance may be shorter or the signal may not be

receivable if there is an electronic lighting device in the same room.

噝 Handle the remote controller with care

Dropping it or getting it wet may compromise its signal transmission

capability. After new batteries are inserted into the remote controller,

the unit require approximately 10 seconds before it can respond to

commands and begin operation.

WHEN OPERATING THE REMOTE CONTROLLER

Approximately

7m from the front

PREPARE THE REMOTE CONTROLLER (continued)

– 6 –

AUTOMATIC OPERATION

Based on the room temperature and outside temperature, the unit determines the most suitable operation

mode (heating, dehumidifying or cooling) and a comfortable temperature. (Set the current time on the remote

controller before starting operation.)

Press the (AUTOMATIC OPERATION) button

to set the operation mode to auto.

Press the (STOP) button.

A short beep sound and the

operation stops.

STOP

Performs heating operation when the room temperature is below 23°C.

Set the temperature to be around 23°C.

Performs dehumidifying operation when the room temperature is 23~26°C.

The preset temperature will be the room temperature at the time of start of air conditioner

operation.

Performs cooling operation when the room temperature is above 27°C.

Set the temperature to be around 27°C.

AUTOMATIC OPERATION

Heating

Dehumidifying

Cooling

Even if dehumidifying operation is set, the air conditioner may not execute dehumidifying if the room humidity

is not very high. This is not a malfunction.



– 7 –

ENGLISH

AUTOMATIC OPERATION (continued)

Increase

Decrease

Adjust the room temperature

Press the (ROOM TEMPERATURE)

button.

Every time you press it, a short beep sound is emitted

is displayed if the temperature is set higher than

the automatically set room temperature by 1°C.

is displayed if the temperature is set lower than the

automatically set room temperature by 1°C.

The adjustable temperature range is not higher or lower

than 3°C of the automatically set room temperature.

Humidity setting cannot be adjusted.

Select the fan speed

Increase (SILENT) (LOW) (AUTO)

Decrease (

AUTO) (LOW) (SILENT)

Press the (FAN SPEED) button.

Room temperature and fan speed can be adjusted to your preference.

1

2

∂ÏÏËÓÈÎ¿

Set the desired FAN SPEED with the (FAN SPEED

button (the display indicates the setting).

(AUTO)

(LOW)

(SILENT)

O r

and the temperature will change by 1°C.

– 8 –

HEATING OPERATION

Press the (HEAT) button to start heating operation.

Press the (HEAT) button.

Adjust the room temperature and fan speed to your preference.

Temperature range between 16°C~32°C can be set.

Press the (STOP) button.

A short beep sound and heating operation stops.

STOP

DEHUMIDIFYING OPERATION

Press the (STOP) button.

A short beep soundnd dehumidifying operation stops.

STOP

ENGLISH

DEUTSCHFRANÇAISITALIANOSPANISHPORTUGUÊS

∂ÏÏËÓÈÎ¿

Use the device for dehumidifying when the room temperature is over 16°C.

When it is under 15°C, the dehumidifying function will not work.

Press the Button indicates (DEHUMIDIFY).

The fan speed is set at LOW.

Fan speed only can be selected to SILENT or LOW.

Set the desired room temperature with the ROOM

TEMPERATURE setting buttons (the display indicates the

setting).

The range of 20-26°C is recommended as the room

temperature for dehumidifying.

2



is emitted

– 9 –

ENGLISH

STOP

Press (POWERFUL) button during operation.



“

” is displayed on the LCD.

ƽ By pressing (POWERFUL) button during AUTO, HEATING, DEHUMIDIFYING or, COOLING the

air conditioner performs at the maximum power.

ƽ During POWERFUL operation, cooler or warmer air will be blown out from indoor unit for COOLING of

HEATING operation respectively.

Press (POWERFUL) button again.

POWERFUL operation stops.

“

” disappears from the LCD.

Press ( STOP) button.

When SLEEP mode, or LEAVE HOME mode is selected, POWERFUL operation is cancelled.

During POWERFUL operation, capacity of the air conditioner will not increase

– if the air conditioner is already running at maximum capacity.

– just before defrost operation (when the air conditioner is running in HEATING operation).

After auto restart, POWERFUL operation is cancelled and previous operation shall start.

POWERFUL OPERATION

COOLING OPERATION

Press the (COOL) button to start cooling operation.

Press the

(COOL) button.

噝Adjust the room temperature and fan speed to your preference.

Temperature range between 16°C~32°C can be set.

Press the

(STOP) button.

噝A short beep sound is emitted and cooling operation stops.

STOP

Or

– 10 –

Ion mist operation is the combined operation mode of the fan operation

and moisturizing operation.

If the Ion mist mode is set while the air conditiconer is in basic operation mode, the air purifying function by

the electric dust collector will operate together.

Press the (ION MIST) button.

Adjust the fan speed to your preference. “HI”, “MED”, “LOW”, “SILENT”

can be selected.

When only Ion mist operation is set,

and (ON TIMER) preset cannot be done.

(OFF TIMER)

ION MIST OPERATION

, the electric dust collector operation

STOP

STOPSTOP

Press the (STOP) button.Or

Press the (ION MIST) button again.

ION MIST operation stops.

“ ” disappears from the LCD.“

– 11 –

ENGLISH

Example: Cooling

With the eco sensor, the air conditioner can detect the activity level in a room and adjust the temperature

and humidity automatically, thus achieving the purpose of energy saving.

Press the button.

The eco sensor automatically adjusts the

indoor temperature and humidity according to

the activity level in the room. However, the

temperature

and humidity specified by the

remote controller remain unchanged.

The energy saving effect can be achieved only after the energy-saving temperature control function keeps

working

for more than 2 hours.

In the energy-saving temperature-control mode, the energy consumption saved by the air conditioner varies with

the activity level.

Operation mode

Reduces the preset temperature

in one of the following cases:

Operation Description

Heating

Cooling

Auto

Dehumidifying

e Actions   person

Decreases the temperature by 2°C.

Increases the temperature by 2°C .

Increases the temperature by 5–10%.

Energy-saving operation in auto mode.

Auto

Cooling

Heating

Raises the preset temperature

in one of the following cases:

Low activity level

Low indoor temperature

Increases the preset temperature

in one of the following cases:

Energy-saving operation in auto

mode.

The detects changes to the infrared generated by human bodies. Therefore, the accuracy

of

may be affected negatively in the following cases:

The activity level is very low (reading, watching TV, etc.) or human bodies are blocked by a screen, cabinet, or glass board.

The indoor temperature is very high and exceeds or approaches the human body temperature (when the refrigeration

just begins).

The person wears thick clothes and turns his/her back to the air conditioner.

Curtains or plant leaves swing due to pet movement or airflow.

Low activity level

Low indoor temperature

can further reduce the energy consumption.

After detecting that the person leaves the room for 30 minutes, the air conditioner turns to the ECO modes

according

to the settings in the remote controller as shown in the right table, but the preset temperature and humidity

in the remote controller remain unchanged.

When the air conditioner works in powerful operation, setting the ECO mode will cancel the powerful operation.

High activity level

High indoor temperature

12)

ECO SENSOR

eco sensor

Comfort airflow (Page



1

– 12 –

The atically change the airflow direction.

Press the air deflection

mode.

If the comfort airflow mode fails to achieve the desired effect, adjust the airflow direction manually.

When the machine works in cooling, dehumidifying, er the

humidity/temperature is very high, the left/right/upper/lower air deflectors may change their angles

to prevent drop of condensed water. After the temperature falls, the air conditioner returns to the comfort

status.

(Direct) Adjusts the airflow direction

automatically to send the air flow to

the location of the person.

(Indirect) Adjusts the airflow direction

automatically to keep the air flow away

from the location of the person.

Return to the setting prior to the

Pressing the

button

Release the

button

Operation Description

Example: Heating

DEUTSCHFRANÇAISITALIANOSPANISH

∂ÏÏËÓÈÎ¿

)TCERIDNI/TCERID( WOLFRIA TROFMOC

COMFORT AIRFLOW button to switch the

COMFORT AIRFLOW

comfort airflow is set,

airflow

aft if the indoor

eco sensor can detect the position of people and autom

comfort

airflow mode.

comfort airflow

1

After the comfort airflow mode is set, the sensor constantly works to detect the position of the person. The

airflow direction is adjusted every 15 seconds to 3 minutes. The airflow direction will not change immediately

when the sensor detects the position of the person.

– 13 –

ENGLISH

CLEAN ( ONE TOUCH CLEAN) OPERATION

Drying indoor heat exchanger after cooling operation to prevent mildew.

Press (CLEAN) button when unit is OFF.

Total time taken for One Touch Clean operation is 60 minutes.

During this operation, HEATING or FAN operation shall

operate.

During one touch clean, operation lamp is blinking.

Press (STOP) button. Or

Press

(CLEAN) button again.

When CLEAN operation finish, unit will switch OFF automatically.

If Daily Timer or Once Timer is set, there is a need to cancel those timer before operating CLEAN function.



STOP

STOPSTOP

– 14 –

LEAVE HOME OPERATION

Prevent the room temperature from falling too much by setting temperature automatically when no one is at home.

10°C

Press (LEAVE HOME) button during stop or operation.

Room temperature is set at 10°C and heating operation starts.

“

”, “ ”, “ ”,“ ”,“ ” is displayed on the LCD.

Press button.

Press

(LEAVE HOME) button again.

Change to other operation mode by pressing (HEAT) button,

Return to previous operation mode.

During Leave Home operation, fan speed and horizontal air deflector position cannot be changed.

POWERFUL and ECO SENSOR operations are not applicable during Leave Home.

(DEHUMIDIFY) button, (COOL) button or (AUTOMATIC

utton.CPERATION) b



STOP

STOPSTOP

– 15 –

ENGLISH

10°

50°

ADJUSTING THE VERTICAL AIRFLOW DIRECTION

Please operate with the remote controller. (Moving by hands may cause malfunction.)

Cooling

operation

Heating

operation

Dehumidifying

About

Set automatically

Air conditioner automatically set to the suitable

angle for each operation (Horizontal air deflector

only. The angle of the vertical air deflector is set to

the front). Usually vertical airflow direction control

is not required.

If room temperature and humidity continue to be

high during cooling, dehumidifying the angle of

horizontal air deflector may change to prevent

dripping of condensed water.

15°

About

60°

Swing

angle

About

Horizontal

Vertical airflow swing

When the (VERTICAL AIRFLOW) button is pressed,

a short beep sound ted and the vertical air deflector

repeats swinging.

When the air conditioner stops operation, the swing of the

vertical air deflector also stops and the air outlet closes.

If the operation resumes, the vertical air deflector is

automatically set to the suitable angle for each operation.

Even if the swing mode is set, the vertical air deflector may

stop swinging depending on the room temperature and

humidity. (Page )

(It may take approximately 10 seconds for the air deflector

to start moving. This is due to the checking operation to set

the air deflector to the correct angle.)

Vertical air flow of your preference

To set the vertical airflow direction to your desired angle, press the (VERTICAL

AIRFLOW) button to move the vertical air deflector, and press the (VERTICAL

AIRFLOW) button again to stop air deflector at your desired angle.

Press the (VERTICAL AIRFLOW) button.

A short beep sound and the vertical air deflector repeats swinging.

(Vertical airflow swing)

Press the (VERTICAL AIRFLOW) button again at your preferred angle.

The swing stops at the position where the button is pressed.

The air outlet closes if the operation stops. The horizontal air deflector will return to

the preset position when the operation resumes.

If the operation mode is changed, the horizontal air deflector will automatically be

set to the proper angle suitable for the newly set mode.

CAUTION

DO not operate long hours with cooling, dehumidifying, nor the vertical air deflector in downward

state.

Some dew may form on the vertical air deflector and drop which may wet your furniture.

Ê

16

is emitted

– 16 –

The movements of the left and right air deflectors displayed in the remote controllers

are not synchronous with movements of the actual air deflectors.

ADJUSTING THE HORIZONTAL AIRFLOW DIRECTION

Adjust the horizontal airflow direction

The angle of horizontal airflow direction is set to the front at the

time of purchase.

Every time the button is pressed, the mode of the horizontal air deflector

changes as below.

A short beep sound is emitted and the angle of the horizontal air deflector

Front

Horizontal

swing

preferred angle

Horizontal angle of your preference

To set the horizontal airflow direction to your desired angle, move the

horizontal air deflector and press the (HORIZONTAL AIRFLOW) button

again to stop air deflector’s movement once it has reached your desired

angle.

Press the (HORIZONTAL AIRFLOW) button again to fix your preferred

angle during horizontal airflow swing.

Fan speed may be increased depending on the angle of the horizontal air

deflector.

Even if the horizontal airflow direction has been adjusted to your desired

angle, the angle of horizontal air deflector may change in the event the room

temperature and humidity continue to be high during cooling, dehumidifying

or dry cool operation. The angle will change back to your desired angle once

the temperature and humidity have been lowered by the air conditioning

operation.

CAUTION

Do not operate long hours with cooling, dehumidifying, horizontal airflow swing operation.

Some dew may form on the horizontal air deflector and drop which may wet your furniture.

In the following cases, the swing stops even when vertical swing and horizontal swing are set.

noitarepo gniyfidimuheD nI noitarepo gnitaeH nI

During preheat operation.

During defrost operation.

When the room temperature reaches the

temperature which had been set.

When the humidity is reached to the humidity

which has been set.

When the room temperature is below 1°C.

The movement scope of the left/right air deflectors are set to the following

5 positions:

changes.

is emitted

– 17 –

ENGLISH

TIMER OPERATION

How to set the once timer

How to set the daily timer

Operation mode, temperature, humidity and fan speed, etc. must be set before setting the timer.

3 types of timers,OFF timer, ON timer and the combination of OFF/ ON timer are available. Only one of these

can be preset at a time.

The device can be set to turn off at a preset time.

1. Press (OFF-TIMER) button. and blink on the display.

2. Set the "turn-off time" with (TIME) button.

3. After setting, direct the remote controller towards the indoor and press

(SEND) button.

and "set time" lights up instead of blinking.

A beep sound  from indoor unit and the (TIMER) lamp on the

indoor unit lights up.

The device will turn on at a designated time.

1. Press (ON-TIMER) button. and blink on the display.

2. Set the "turn-on time" with (TIME) button.

3. After setting, direct the remote controller towards the indoor and press

(SEND) button.

and "set time" light up instead of blinking.

A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor

unit lights up.

For (OFF TIMER) setting

For (ON TIMER) setting

After o timer is set

Press (SEND) button again, is displayed.

A beep sound  from indoor unit

Every time you press the (SEND) button, the mode will be changed between once

timer and daily timer.

nce

.

is

– 18 –

(OFF TIMER)

(ON TIMER)

ta dehcaer si erutarepmet derised ruoy dna .m.p 03: 2 2 ta noitarepo pots ot remit eht gnittes nehW

:elpmaxe roF(

7:00.)

The timer with earlier preset time will function first, based on the time at which the timer is set.

Press the (OFF

TIMER) button.

(OFF TIMER) blinks.

0:00 a.m. or the previous preset

time is displayed.

Press the (TIMER)

button to set the time.

Time can be set in increments

of 10 minutes.

The time can be fast-forwarded

by continuously pressing the

button.

Time is incremented

Time is decremented

Press the ) DNES(

button.

A short beep sound i

(OFF TIMER) is set.

(OFF TIMER) indication

stops blinking and lights up.

(TIMER SET) will be

displayed.

The (TIMER) indicator on the

indoor unit lights up.

To change the preset time for

(OFF TIMER), return to

procedure and press the

(OFF TIMER) button.

eht tes ot WOH

1 2 3

s emitted

and the

22:30

– 19 –

ENGLISH

Press the (ON

TIMER) button.

(ON TIMER) blinks.

6:00 or the previous preset

time is displayed.

display indicates the

sequence of (OFF TIMER)

and (ON TIMER) function.

Press the (TIMER)

button to set the time.

Time can be set in increments

of 10 minutes.

The time can be fast-forwarded

by continuously pressing the

button.

Time is incremented

Time is decremented

Press the (SEND )

button.

A short beep sound is emitted

(ON TIMER) is set.

(ON TIMER) indication stops

blinking and lights up.

(TIMER SET) will be

displayed.

The (TIMER) indicator on the

indoor unit lights up.

To change the preset time

for (ON TIMER) return to

procedure and press the

(ON TIMER) button.







How to cancel the preset timer

Press the (CANCEL) button.

(All the preset timers will be cancelled.)

As the time settings are stored in memory in the remote controller, just press

the (SEND ) button in order to use the same settings next time.

and the

– 20 –

SLEEP TIMER OPERATION

Configuring the fan speed appropriate for sleeping and stop the operation at specified time.

The display below indicates sleep timer which is set for 2 hours at 23:38 and the turn off time will be 1:38.

Press the (SLEEP) button.

Every time you press the (SLEEP) button, the mode will change

as shown below.

Cancel the sleep timer

Preset time of sleep timer and the time at which the operation stops

will be displayed on the remote controller.

Fan speed remains “SILENT” during sleep timer operation.

Press the (SLEEP) button or (STOP) button.

Combination of Sleep Timer and On Timer operation

Set the operation to auto stop by sleep timer operation, it can be set to start the operation next morning by

(ON TIMER). Set (ON TIMER) first and then press the (SLEEP) button.

The display below indicates (ON TIMER) which is set at 6:00

Preset the (ON TIMER).

(Page 17

Press the (SLEEP) button.

The unit will turn off in 2 hours (at 1:38)

and will turn on in order to reach the preset

temperature by 6:00.

The time range of sleep timer operation should

be set before (ON TIMER) time.

and 2 hours sleep time at 23:38

.

)





STOP

La page charge ...

Hitachi RAR-5J1 Manuel utilisateur

Hitachi RAR-5J1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents