Windsor Chariot 2 iGloss 20 Le manuel du propriétaire

Register

your product

www.kaercher.com/welcome

86398800-D 12/16/19

Chariot 2 iGloss 20

English 02

2 86398800 Operator Manual - Chariot 2 iGloss 20

Machine Data Label

The Chariot iGloss 20 is a battery powered, ride-on, hard floor burnisher intended for commercial use. This

machine applies a high luster to hard floor surfaces.

MODELS:

CBPS20 1.002-031.0

CBPSC20 1.002-032.0

CBPL20 1.002-033.0

CBPLC20 1.002-034.0

CBAL20 1.002-035.0

CBALC20 1.002-036.0

Warranty Registration

Thank you for purchasing a Kärcher North America product. Warranty registration is quick

and easy. Your registration will allow us to serve you better over the lifetime of the product.

To register your product go to :

http://warranty.karcherna.com/

For customer assistance:

1-800-444-7654

3

Table of Contents

Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . . .2

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3

How To Use This Manual . . . . . . . . . . . . . . . . . . . . .4

Safety

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . .5

HAZARD INTENSITY LEVEL . . . . . . . . . . . . . . . . . .7

SAFETY LABEL LOCATIONS . . . . . . . . . . . . . . . . .9

Operation

Technical Specifications . . . . . . . . . . . . . . . . . . . . .10

How This Machine Works . . . . . . . . . . . . . . . . . . . .12

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Drive Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Function Mode Switch. . . . . . . . . . . . . . . . . . . . . . .18

Pre-Run Machine Inspection. . . . . . . . . . . . . . . . . .20

Starting Machine . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Emergency Stop Procedure . . . . . . . . . . . . . . . . . .20

Operating the Machine . . . . . . . . . . . . . . . . . . . . . .21

Normal Burnishing . . . . . . . . . . . . . . . . . . . . . . . . .21

Maintenance

Service Schedule . . . . . . . . . . . . . . . . . . . . . . . . . .22

Checking Battery Specific Gravity. . . . . . . . . . . . . .26

Changing Batteries . . . . . . . . . . . . . . . . . . . . . . . . .28

Battery Charger Programming . . . . . . . . . . . . . . . .29

Burnishing Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Burnisher Motor Carbon Brush Ring Replacement.32

Deck Actuator Removal / Replacement . . . . . . . . .32

Body Assembly Removal . . . . . . . . . . . . . . . . . . . .34

Drive Unit Removal . . . . . . . . . . . . . . . . . . . . . . . . .34

Vacuum - Optional . . . . . . . . . . . . . . . . . . . . . . . . .36

Drive Motor-From Serial Number (3*) . . . . . . . . . . .38

Drive Motor Carbon Brush Replacement . . . . . . . .38

Drive Chain Tension . . . . . . . . . . . . . . . . . . . . . . .38

Drive Motor-Prior to Serial Number (3*) . . . . . . . . .40

Drive Motor Carbon Brush Replacement . . . . . . . .40

Drive Chain Tension . . . . . . . . . . . . . . . . . . . . . . . .40

Machine Tie-Downs . . . . . . . . . . . . . . . . . . . . . . . .42

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Suggested Spare Parts. . . . . . . . . . . . . . . . . . . . . 46

86398800 Operator Manual - Chariot 2 iGloss 20

4

How To Use This Manual

This manual contains the following sections:

• HOW TO USE THIS MANUAL

• SAFETY

•OPERATIONS

• MAINTENANCE

• PARTS LIST

The HOW TO USE THIS MANUAL section will tell you

how to find important information for ordering correct

repair parts.

Parts may be ordered from authorized Kärcher North

America dealers. When placing an order for parts, the

machine model and machine serial number are

important. Refer to the MACHINE DATA box which is

filled out during the installation of your machine. The

MACHINE DATA box is located on the inside of the

front cover of this manual.

The model and serial number of your machine are

located below the battery compartment of the machine.

The SAFETY section contains important information

regarding hazard or unsafe practices of the machine.

Levels of hazards are identified that could

result in product or personal injury, or severe injury

resulting in death.

The OPERATIONS section is to familiarize the operator

with the operation and function of the machine.

The MAINTENANCE section contains preventive main-

tenance to keep the machine and its components in

good working condition. They are listed in this general

order:

• Batteries

•Brush Deck

• Circuit Protection

• Drive Motor and Brake

• Service Schedule

• Vacuum Motor

• Machine Troubleshooting

The number on the lower right corner of the front cover

is the part number for this manual.

86398800 Operator Manual - Chariot 2 iGloss 20

5

Safety

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain.

Use only as described in this manual. Use only manufacturer's recommended components and attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to

an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

This machine is not suitable for picking up hazardous dust.

Do not operate this machine near flammable fluids, dust or vapors.

Maintenance and repairs must be done by qualified personnel.

Disconnect battery before cleaning or servicing.

Before the machine is discarded, the batteries must be removed and properly disposed of.

Make sure all warning and caution labels are legible and properly attached to the machine.

During operation, attention shall be paid to other persons, especially children.

Before use all covers and doors shall be put in the positions specified in the instructions.

When leaving unattended, secure against unintentional movement.

The machine shall only be operated by instructed and authorized persons.

When leaving unattended, switch off or lock the main power switch to prevent unauthorized use.

This appliance has been designed for use with the pads specified by the manufacturer. The fitting of other pads

may affect its safety.

Do not use on surfaces having a gradient of over 10% (6 degrees).

SAVE THESE INSTRUCTIONS

86398800 Operator Manual - Chariot 2 iGloss 20

6

Safety

MESURES DE SÉCURITÉ IMPORTANTES

Lors de l'utilisation d'un appareil à batteries, il est nécessaire de respecter systématiquement des mesures de

sécurité de base, comme suit :

PRENEZ NOTE DE TOUTES CES MESURES AVANT D'UTILISER CETTE MACHINE.

Pour réduire les risques d'incendie, de chocs électriques, ou de blessures :

N'utiliser cette machine qu'en intérieur. Ne jamais l'utiliser à l'extérieur ou dans la pluie.

Utiliser cet appareil conformément aux instructions du présent manuel uniquement. N'utiliser que les composants

et les accessoires conseillés par le fabricant.

Lorsque la machine ne fonctionnant pas correctement, a fait l'objet d'une chute ou d'une détérioration, a été laissée

à l'extérieur, est tombée dans l'eau, la retourner au centre de service agréé.

Ne pas opérer la machine lorsque les conduits de ventilation sont bloquées. Débarrasser les débris des conduits,

car ils peuvent réduire l'écoulement d'air.

Cette machine n'est pas adaptée au ramassage de poussières dangereuses

Ne pas l'utiliser près de liquides, de poussières ou de vapeurs inflammables.

L'entretien et les réparations de la machine doivent être effectuées par un personnel qualifié.

Si de la mousse ou du liquide sort de la machine, la mettre hors tension immédiatement.

Déconnecter les batteries avant de nettoyer la machine ou de la soumettre à un entretien.

Avant de se débarrasser de la machine, il est nécessaire de retirer les batteries et de les jeter correctement.

S'assurer que toutes les plaques d'avertissement ou de précaution sont lisibles et fixées correctement sur la

machine.

Durant la manoeuvre de la machine, prendre garde aux personnes environnantes et notamment aux enfants.

Avant l'utilisation de la machine, veiller à positionner tous les couvercles et portes comme indiqué dans les instruc-

tions.

Lorsque la machine est laissée sans surveillance, s'assurer qu'elle ne se déplace pas de manière accidentelle.

Cette machine ne doit être manoeuvrée que par un personnel expérimenté et qualifié.

Lorsque la machine est laissée sans surveillance, la mettre hors tension ou verrouiller l'interrupteur principal afin

d'empêcher un emploi non autorisé.

Seuls les produits chimiques recommandés par le fabricant doivent être utilisés.

Cette machine a été conçue pour être utilisée avec des garnitures spécifiées par le fabricant.

L'utilisation d'autres garnitures peut affecter sa sûreté.

N'employez pas sur des surfaces ayant un gradient de plus de 10% (6 degrés).

CONSERVER CES INSTRUCTIONS

86398800 Operator Manual - Chariot 2 iGloss 20

7

Safety

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY.

The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating

condition. Following is information that signals some potentially dangerous conditions to the operator or the equip-

ment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the

machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use

Kärcher North America approved replacement parts.

Batteries emit hydrogen gas. Explosion or fire can result. Keep sparks and open flame away. Keep battery

compartment open during charging. Keep sparks and flames away from the batteries. Do not smoke

around batteries.

Disconnect batteries before working on machine. Only qualified personnel should work inside machine.

Always wear eye protection and protective clothing when working on or near batteries. Avoid skin contact

with the acid contained in the batteries.

Never allow metal to lie across battery tops.

86398800 Operator Manual - Chariot 2 iGloss 20

8

Safety

Les symboles ci-dessous sont utilisés à travers ce manuel comme illustré dans leurs descriptions :

DEGRÉS DE RISQUES EN CAS DE DANGER

Il existe trois degrés de risques identifiés par les termes signalétiques -AVERTISSEMENT et ATTENTION et POUR

VOTRE SÉCURITÉ. Le degré de risque est défini de la manière suivante:

AVERTISSEMENT - Dangers ou méthodes dangereuses qui POURRAIENT provoquer de graves blessures ou

entraîner la mort.

ATTENTION - Dangers ou méthodes dangereuses qui pourraient provoquer des blessures légères ou une détério-

ration du produit ou des biens immobiliers.

POUR VOTRE SÉCURITÉ: ce signe permet d'identifier les mesures de précaution à prendre pour assurer un bon

fonctionnement du matériel.

Rendre compte immédiatement d'une défaillance ou d'une détérioration de la machine. Ne pas utiliser la machine

si celle-ci ne fonctionne pas correctement. Lire soigneusement les informations ci-dessous signalant certains

dangers potentiels pour l'opérateur de la machine. L'opérateur doit être absolument au courant de ces dangers

potentiels. Localiser tous les dispositifs de sécurité sur la machine. Il est conseillé de prendre les mesures néces-

saires pour former le personnel opérateur.

POUR VOTRE SÉCURITÉ:

NE PAS MANOEUVRER LA MACHINE:

Lorsqu'on n'est pas expérimenté ou qualifié.

Lorsque le guide d'utilisation n'est pas été lu ou compris.

Dans des zones inflammables ou explosives.

Dans des zones où des objets peuvent tomber.

LORS DE L'ENTRETIEN DE LA MACHINE:

Éviter les parties amovibles. Ne pas porter de vêtements amples, tels que des vestes, des chemises ou des

vêtements avec manches lors de l'utilisation de la machine. Utiliser les pièces détachées Kärcher North America

homologuées.

Les batteries émettent le gaz d'hydrogène. L'explosion ou le feu peut résulter. Étincelles de subsistance et

flamme nue loin. Compartiment de batterie de subsistance ouvert en chargeant. Étincelles et flammes de

subsistance loin des batteries. Ne fumez pas autour des batteries.

Déconnecter les batteries avant de travailler sur la machine. La machine ne doit être confiée qu'à un

personnel qualifié. Porter systématiquement des lunettes et des vêtements de protection lors d'une inter-

vention sur les batteries ou aux alentours. Éviter tout contact de la peau avec l'acide contenu dans les

batteries.

Ne jamais placer d'objets métalliques sur le dessus des batteries.

86398800 Operator Manual - Chariot 2 iGloss 20

9

Safety

SAFETY LABEL LOCATIONS

These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible,

promptly replace them.

EMPLACEMENT DE L'ÉTIQUETTE DE SÉCURITÉ

REMARQUE : Ces dessins indiquent l'emplacement des étiquettes de sécurité sur la machine. Si, à tout moment,

les étiquettes deviennent illisibles, contactez votre représentant autorisé pour un remplacement

rapide.

CAUTION

BATTERY

86252520

CAUTION

CAUTION LABEL

86244310

86385070

WARNING LABEL

86398800 Operator Manual - Chariot 2 iGloss 20

10

Operation

Technical Specifications

ITEM DIMENSION/CAPACITY

Nominal Power Passive Dust Control 2232W, Active Dust Control 2628W

Rated Voltage 36 Volts DC

Rated Amperage Passive Dust Control 62A, Active Dust Control 73A

Batteries 3 X12 Volt 114 AH, 130 AH, 225AH, or 234AH @ 20 hr. rate

Battery Compartment Dimensions 21.5 in. x 15.25 in. x 16 in. tall (546mm x 387mm x 406mm tall)

Burnisher Motor 3.0 HP, 36V, 2000RPM (2237W)

Vacuum Motor .63 HP (470 W)

Maximum flow rate of vacuum motor 72 cfm (33.98 liters per second)

Maximum suction of vacuum motor 47.3 inches of water (11.7 kPa)

Propelling Motor .38 HP (280W)

Mass (GVW) 838 lbs (380 kg)

Weight empty without batteries 231 lbs (105 kg)

Burnisher pad diameter 20 inch (508 mm)

Tires 8 in. (203mm) drive, 6 in. (156mm) rear, polyurethane

Maximum Speed 2.3 mph (3.7Km/hour)

Theoretical Coverage 19,800ft²/hr @ 2.5 mph with 2 in. overlap

Brake Electrical parking brake,sets automatically whenever operator stops.

Minimum aisle u-turn width 51in. (1295 mm)

Maximum rated climb and descent angle 10% (6 degrees)

Vibration, hands 1.58 m/s²

Vibration, feet 1.39 m/s²

Uncertainty 0.5 m/s²

Sound pressure level Passive Dust Control 59.7 dBA, Active Dust Control 62.2 dBA

Sound power level Passive Dust Control 76.3 dBA, Active Dust Control 80.1 dBA

Uncertainty 3.0 dBA

86398800 Operator Manual - Chariot 2 iGloss 20

11

Operation

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure

that they do not play with the appliance.

Cet appareil n'est pas prévu à l'usage des personnes (enfants y compris) avec des possibilités physiques, sensori-

elles ou mentales réduites, ou le manque d'expérience et de connaissance, à moins qu'ils aient été donnés la

surveillance ou l'instruction au sujet de l'utilisation de l'appareil par une personne chargée de leur sûreté. Des

enfants devraient être dirigés pour s'assurer qu'ils ne jouent pas avec l'appareil.

ITEM MEASURE

Height 51.8 in (1316mm)

Length 44.0 in (1118mm)

Width 23.4 in. (594mm)

Width of burnish path 20 in (508mm)

WIDTH

LENGTH

86398800 Operator Manual - Chariot 2 iGloss 20

12

Operation

How This Machine Works

The Chariot® iGloss 20 is a battery powered, self-

propelled, hard floor burnisher intended for commercial

use. The appliance spins a high-speed burnishing pad

in contact with the floor surface to produce a high luster

shine.

The machine's primary systems are the burnishing

system, the dust control system, and the operator

control system.

The function of the burnishing system is to spin a high-

speed burnishing pad in contact with a floor surface

that has had a burnishable floor finish applied. The

burnishing pad can be lowered to the floor and raised

by the operator. The burnishing pad will spin only when

the machine is directed to move by the operator.

The function of the dust control system is to collect the

dust that is created during the burnishing process. It is

normal for a portion of the floor finish to be removed in

the form of dust during the process. While burnishing,

air movement is created within the burnishing head by

the spinning pad. The dust that is also created is

entrained in the air stream and transported to a filter

bag where it is collected and separated from the air

stream. The filter bag can be easily changed without

releasing the collected dust. The optional active dust

control system uses a vacuum motor to improve dust

collection before, during, and after burnishing.

The function of the operator control system is to control

the direction and speed of the machine. The directional

control system consists of the direction control drive

reset switch, throttle pedal, emergency stop/brake

switch, steering wheel, propel controller, and drive

wheel. The directional control drive reset switch signals

forward or reverse direction and makes sure the

operator is on the platform before machine will propel.

The controller interprets signals from the throttle pedal

to command the drive wheel to propel or slow the

machine. The steering wheel points the drive wheel in

the direction desired by the operator. The parking brake

automatically engages when the operator stops the

machine. The emergency stop/brake can be used to

hold the machine on slopes.

86398800 Operator Manual - Chariot 2 iGloss 20

13

Operation

Components

1. Drive Control

2. Burnisher Controls

3. Control Console

4. Pedal Platform

5. Lower Body

6. Bag Enclosure

7. Bag Enclosure Cover

8. Burnisher Deck

9. Rear Cover

86398800 Operator Manual - Chariot 2 iGloss 20

1

2

3

4

5

6

7

8

9

14

Operation

Drive Controls

1. Key Switch

2. Emergency Stop/Brake Switch

3. Directional Control / Drive Reset Switch

4. Throttle Pedal

5. Horn Button

6. Steering Wheel

7. Speed Control/Function Select

8. Battery Discharge Indicator

9. Hour Meter

10. Operator Presence Switch

11. Bag Present indicator

12. Check Pad Indicator

6

4

10

3

2

5

18 9

7

11

12

86398800 Operator Manual - Chariot 2 iGloss 20

15

Operation

1. KEY SWITCH

Controls the power for machine functions.

To turn the machine power on, rotate key clockwise.

To turn the machine off, rotate key counterclockwise.

When the key is turned on the battery symbol will flash once and stay on continuously.

2. EMERGENCY STOP/BRAKE SWITCH

This safety feature is designed to cut all power to the machine at any time and apply parking brake.

To shut the machine power off, push the Emergency Stop Switch, this will also engage the parking brake and

cause the machine to stop immediately.

To reset the machine, rotate the switch clockwise.

3. DIRECTIONAL CONTROL / DRIVE RESET SWITCH

This safety feature is designed to ensure safe engagement of propel drive. Each time the machine power is

turned on, or each time an operator steps on to the platform, the Drive Reset Switch must be pushed before

machine will propel.

The switch controls the direction of travel of the vehicle. The lighted arrow on the switch indicates direction of

travel.

To travel forward, press the top of the switch.

To travel in reverse, press the bottom of the switch.

86398800 Operator Manual - Chariot 2 iGloss 20

16

Operation

4. THROTTLE PEDAL

Controls the speed of the vehicle within the speed control setting selected. Pressing the pedal causes the

machine to travel in the direction selected by the Directional Control Switch.

To increase speed, increase pressure on the pedal.

To decrease speed, decrease pressure on the pedal.

5. HORN BUTTON

The horn is activated by pressing the horn button.

6. STEERING WHEEL

The steering wheel turns the front wheel causing the machine to change direction.

7. SPEED CONTROL

Controls the maximum speed of the machine. There are two settings, slow and fast.

To change speed, rotate the dial to either slow or fast position. The slow position is to the left (counterclock-

wise), fast to the right (top position).

The throttle pedal will always regulate the speed between 0 and maximum

86398800 Operator Manual - Chariot 2 iGloss 20

17

Operation

8. BATTERY DISCHARGE INDICATOR

Indicates the charge level of the batteries.

The indicator will be illuminated if the batteries have a sufficient charge. A slow, continuous flash indicates the

batteries require charging.

The Battery Lockout function will activate when the batteries are low.

Once active, the LED status indicator will begin to flash slowly and the controller will inhibit the burnisher motor.

The vacuum and drive remain functional. Return the unit to the charging station and charge the batteries.

NOTES: Continuing usage may damage the batteries.

When the machine is left overnight with less than a full charge, the display may initially indicate a full charge. It

will also indicate a full charge if the batteries are disconnected, then reconnected. After a few minutes of

operation the indicator will give the correct charge level.

9. HOUR METER

Records the number of hours the machine has been in burnishing operation. This information is useful in deter-

mining when to service the machine.

10. OPERATOR PRESENCE SWITCH

Must be pressed down prior to any machine functions enabled.

11. BAG PRESENT INDICATOR

Notifies operator if dust collection bag is missing. LED is red when bag is missing or not properly installed.

12. CHECK PAD INDICATOR

Notifies operator of potential problem with pad or missing pad. When LED is red, operator should remove pad

driver and verify pad condition and proper installation.

86398800 Operator Manual - Chariot 2 iGloss 20

18

Operation

Function Mode Switch

1. Function Mode Switch

The first two positions are for transport only. See drive controls section.

Light burnishing

This mode is used for light burnishing. In this mode the machine will propel at fast

speed. The ‘floating’ burnisher deck is in the down position. When equipped with

optional active dust collection, vacuum motor will be on.

Deep burnishing

This mode is used for deep burnishing. In this mode the machine will propel at slow

speed. The ‘floating’ burnisher deck is in the down position. When equipped with

optional active dust collection, vacuum motor will be on.

1

86398800 Operator Manual - Chariot 2 iGloss 20

19

Notes:

86398800 Operator Manual - Chariot 2 iGloss 20

20

Operation

Machine Operation

Pre-Run Machine Inspection

Do a pre-run inspection to find possible problems that

could cause poor performance or lost time from break-

down. Follow the same procedure each time to avoid

missing steps.

NOTE: See maintenance section for pre-run machine

inspection checklist items.

Starting Machine

NOTE: Perform pre-run machine check before

operating machine.

FOR SAFETY: Before starting machine, make sure

that all safety devices are in place and operating

properly.

1. Disconnect or unplug battery charger.

2. Close the cover(s).

3. Verify condition of burnishing pad, replace if neces-

sary.

4. Verify removable pad driver is installed correctly

and pad rotation lock is released.

5. The operator should be on the pedal platform. The

throttle pedal must be in the neutral position.

6. Turn the machine power on by turning key switch

clockwise to the “ON” position.

7. Verify dust collection bag is installed.

8. Press the Drive Reset Directional Control Switch to

reset and set the intended direction for travel.

9. Press lightly on the throttle pedal with right foot

Emergency Stop Procedure

Push in emergency stop button. This will also engage

the parking brake and cause the machine to stop imme-

diately.

86398800 Operator Manual - Chariot 2 iGloss 20

La page charge ...

Windsor Chariot 2 iGloss 20 Le manuel du propriétaire

Windsor Chariot 2 iGloss 20 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents