Kenwood KDC-X502 Le manuel du propriétaire

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

KDC-X702

KDC-BT772HD

KMR-D772BT

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER LECTEUR DE CD

MODE D’EMPLOI

REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM

MANUAL DE INSTRUCCIONES

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.

Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.

Model KDC-X702/KDC-BT772HD/KMR-D772BT/KDC-X502/KDC-BT572U

Serial number

US Residents Only

Register Online

Register your Kenwood product at http://www.kenwood.com/usa/

KDC-X502

KDC-BT572U

JS_KWD_KDC_X702_KN_C_9.indd 1JS_KWD_KDC_X702_KN_C_9.indd 1 7/14/2017 2:19:52 PM7/14/2017 2:19:52 PM

i

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida

útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de

residuos)

Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser

desechados como residuos domésticos. Los equipos eléctricos y electrónicos al final

de la vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento

adecuado a estos productos y a sus subproductos residuales correspondientes.

Póngase en contacto con su administración local para obtener información sobre el

punto de recogida más cercano. Un tratamiento correcto del reciclaje y la eliminación

de residuos ayuda a conservar los recursos y evita al mismo tiempo efectos

perjudiciales en la salud y el medio ambiente.

CALIFORNIA, USA ONLY

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special

handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

Informação sobre a eliminação de pilhas

Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao revendedor ou

entidade autorizada para que a mesma seja devolvida ao fabricante ou importador.

A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos naturais ao

mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio ambiente.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the modifications are expressly approved in the

instruction manual. The user could lose the authority to operate this equipment if an unauthorized

change or modification is made.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment may cause harmful interference to

radio communications, if it is not installed and used in accordance with the instructions. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

In compliance with Federal Regulations, following are reproductions of labels on, or inside

the product relating to laser product safety.

JVC KENWOOD Corporation

2967-3, ISHIKAWA-MACHI,

HACHIOJI-SHI, TOKYO, JAPAN

THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR

SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.

Location : Top Plate

JS_KWD_KDC_X702_KN_S_9.indd iJS_KWD_KDC_X702_KN_S_9.indd i 7/14/2017 2:20:09 PM7/14/2017 2:20:09 PM

ii

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CAUTION

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio

frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to

comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be

installed and operated keeping the radiator at least 20cm or more away from person’s body.

ATTENTION

Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un

environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices

d’exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet

une énergie RF très faible qui est considérée comme conforme sans évaluation de l’exposition maximale

autorisée (MPE). Cependant, il est souhaitable qu’il devrait être installé et utilisé en gardant une

distance de 20 cm ou plus entre le radiateur et le corps humain.

Para cumplimiento de la IFT:

“La operación de este equipo está sujeta a las siguientes dos condiciones:

(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y

(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su

operación no deseada”

(For / / )

Contains Bluetooth Module FCC ID: ZWY8350X

IC ID: 12033A-8350X

(For

/ )

Contains Bluetooth Module FCC ID: ZWY8811X

IC ID: 12033A-8811X

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

IC (Industry Canada) Notice

This device complies with Industry Canada’s licence-exempt RSSs.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

Note de IC (Industrie Canada)

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils

radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage;

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.

JS_KWD_KDC_X702_KN_S_9.indd iiJS_KWD_KDC_X702_KN_S_9.indd ii 7/14/2017 2:20:09 PM7/14/2017 2:20:09 PM

iii

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is

copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions

which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.

This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the

Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or

indirectly from any third party. In such case, some third parties require the Users to follow their conditions

for use separately from this Software License Agreement. Such software shall not be subject to this

Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided

separately below.

Article 1 General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case

referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User.

(the country where the User bought the Product(hereinafter the "Country")

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the

Product.

2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed

Software and any related documents, whether in whole or in part.

3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall

not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4. The User shall use the Licensed Software according to the directions described in the operation

manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright

Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software

embedded in the Product (including any related materials, updates and upgrades) on condition that

no original, copies or related materials continue in the possession of the User, and that the User shall

cause the transferee to comply with this Software License Agreement.

2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code

analysis works in connection with the Licensed Software.

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents

shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or

sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be

entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any

related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User

or any third party due to the exercise of the license granted to the User under this Agreement, unless

otherwise restricted by law.

2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with

certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any

other intellectual property right that was caused by the User's use of the Licensed Software, the User shall

settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any

inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof

or any other information to be granted under this Agreement, as well as the conditions of this Agreement

as has not yet entered the public domain, and shall not disclose or divulge the same to any third party

without approval of the Licensor.

JS_KWD_KDC_X702_KN_S_9.indd iiiJS_KWD_KDC_X702_KN_S_9.indd iii 7/14/2017 2:20:09 PM7/14/2017 2:20:09 PM

iv

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Article 8 Termination

In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this

Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event:

(1) when the User violated any provision of this Agreement; or

(2) when a petition has been filed against the User for an attachment,

provisional attachment, provisional disposition or any other compulsory execution.

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related

documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor

and the Original Rightholder, and in no event shall they be under the ownership of the User.

2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the copyright and other

intellectual property rights.

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country of the User (including

transmission thereof outside the country of the User via Internet of other communication tools).

2. The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of

User and any other countries.

3. The User shall agree that the software will be subject to any and all applicable international and domestic laws (including

the export control regulation of the country of User and any other countries, and any restrictions concerning the end-users,

the use by end-users and importing countries to be provided by the country of User and any other countries, and any other

governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions shall continue in force.

2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of this Agreement shall be

provided or settled upon good-faith consultation between the Licensor and the User.

3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and any dispute arising from,

and relating to the rights and obligations under, this Agreement shall be submitted to the exclusive jurisdiction of the

Tokyo District Court for its first instance.

Important Notice concerning the Software

-jansson

Permission is hereby granted, free of charge, to any person obtaining a copy of this

software and associated documentation files (the "Software"), to deal in the Software

without restriction, including without limitation the rights to use, copy, modify,

merge, publish, distribute, sublicense, and/or sell copies of the Software, and to

permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies

or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR

OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

OTHER DEALINGS IN THE SOFTWARE.

JS_KWD_KDC_X702_KN_S_9.indd ivJS_KWD_KDC_X702_KN_S_9.indd iv 7/14/2017 2:20:09 PM7/14/2017 2:20:09 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

2

BEFORE USE

IMPORTANT

•

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe

Warning and Caution in this manual.

•

Please keep the manual in a safe and accessible place for future reference.

WARNING

•

Do not operate any function that takes your attention away from safe driving.

•

Do not ingest the battery, Chemical Burn Hazard

The remote control supplied with this product contains a coin/button cell battery.

If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product and keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Caution

Volume setting:

•

Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•

Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•

Avoid using the external device if it might hinder safe driving.

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•

Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

•

If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

•

USB rating for the USB cables from the rear of the unit is indicated on a label.

( 42)

•

Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire

connected

( 41)

. Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

Remote control (RC-406):

•

Do not leave the remote control in hot places such as on the dashboard.

•

The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

•

The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

How to read this manual

•

Operations are explained mainly using buttons on the faceplate of .

•

English indications are used for the purpose of explanation. You can select the display language from the

[FUNCTION]

menu.

( 5)

•

[XX]

indicates the selected items.

•

( XX)

indicates references are available on the stated page.

CONTENTS

BEFORE USE 2

BASICS 3

GETTING STARTED 4

1 Select the display language

and cancel the demonstration

2 Set the clock and date

3 Set the initial settings

HD Radio

TM

tuner 6

RADIO 8

CD/USB/iPod/ANDROID 10

AUX 13

Pandora® 13

iHeartRadio® 15

Spotify 16

SiriusXM® Radio 17

BLUETOOTH® 20

AUDIO SETTINGS 29

DISPLAY SETTINGS 32

TROUBLESHOOTING 33

REFERENCES 36

Maintenance

More information

INSTALLATION/

CONNECTION 39

SPECIFICATIONS 43

ENGLISH

JS_KWD_KDC_X702_KN_EN_9.indd 2JS_KWD_KDC_X702_KN_EN_9.indd 2 7/14/2017 2:20:31 PM7/14/2017 2:20:31 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

3

BASICS

To On the faceplate

Turn on the power

Press

.

• Press and hold to turn off the power.

*

Adjust the volume Turn the volume knob.

Select a source

Press

repeatedly.

Change the display information Press DISP repeatedly.

( 38, 39)

*

For : The power will automatically turn off after 20minutes when in standby mode (Auto Power Off).

Faceplate

How to reset

Attach

Detach

ENGLISH

Display windowVolume knob

Detach button

Note: The highlighted area on the faceplate flashes when the unit enters searching status.

Lights up when

Bluetooth connection

is established.

( 21)

USB 1 cable from the rear of the unit.

(For

/ / )

USB 2 cable from the rear of the unit.

Auxiliary cable from the rear of the unit.

Reset the unit within

5seconds after

detaching the faceplate.

JS_KWD_KDC_X702_KN_EN_9.indd 3JS_KWD_KDC_X702_KN_EN_9.indd 3 7/14/2017 2:20:31 PM7/14/2017 2:20:31 PM

4

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power for the first time (or

[FACTORY RESET]

is set to

[YES]

,

5

), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME

KNOB”

1 Turn the volume knob to select

[ENG]

(English) or

[SPA]

(Spanish),

then press the knob.

[ENG]

is selected for the initial setup.

Then, (except for

) the display shows: “CANCEL DEMO”

“PRESS” “VOLUME KNOB”.

2 Press the volume knob.

[YES]

is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

Set the clock and date

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[CLOCK]

, then press the knob.

To adjust the clock

3 Turn the volume knob to select

[CLOCK ADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Hour

Minute

5 Turn the volume knob to select

[CLOCK FORMAT]

, then press the knob.

6 Turn the volume knob to select

[12H]

or

[24H]

, then press the knob.

1

2

BASICS

To On the remote control

Turn on the power Press and hold SRC to turn off the power.

( Pressing SRC does not turn on the power. )

Adjust the volume Press

or .

• Press and hold

to continuously increase

the volume to 15.

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Select a source Press SRC repeatedly.

Remote control (RC-406)

This unit can be remotely controlled with an optionally purchased remote

control.

Pull out the insulation sheet when

using for the first time.

How to replace the battery

Remote sensor

(Do not expose to bright sunlight.)

: Remote control functions are not available.

ENGLISH

JS_KWD_KDC_X702_KN_EN_9.indd 4JS_KWD_KDC_X702_KN_EN_9.indd 4 7/14/2017 2:20:31 PM7/14/2017 2:20:31 PM

ENGLISH

5

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

To set the date

7 Turn the volume knob to select

[DATE FORMAT]

, then press the knob.

8 Turn the volume knob to select

[DD/MM/YY]

or

[MM/DD/YY]

, then press

the knob.

9 Turn the volume knob to select

[DATE SET]

, then press the knob.

10 Turn the volume knob to make the settings, then press the knob.

Day

Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press .

Set the initial settings

1

Press repeatedly to enter STANDBY.

2 Press the volume knob to enter

[FUNCTION]

.

3 Turn the volume knob to select an item (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated.

5 Press and hold to exit.

To return to the previous setting item, press .

Default:

XX

DISPLAY

EASY MENU

When entering

[FUNCTION]

...

ON

:LCD DISPLAY zone illumination changes to white color.;

OFF

:LCD DISPLAY zone illumination remains as

[COLOR SELECT]

color.

( 32)

•

KEY zone illumination changes to light blue color when you enter

[FUNCTION]

, irregardless of the

[EASY MENU]

setting.

•

Refer to the illustration on page 32 for zone identification.

TUNER SETTING

PRESET TYPE

NORMAL

:Memorizes one station for each preset button in each band

(FM1/FM2/FM3/AM).;

MIX

:Memorizes one station or SiriusXM channel

for each preset button, regardless of the selected band or SiriusXM

channel.

3

SYSTEM

KEY BEEP

ON

:Activates the keypress tone.;

OFF

:Deactivates.

SOURCE SELECT

PANDORA SRC

ON

:Enables PANDORA 1/PANDORA 2/PANDORA in source selection.;

OFF

:Disables.

( 13)

IHEART SRC

ON

:Enables IHEARTRADIO 1/IHEARTRADIO 2/IHEARTRADIO in source

selection.;

OFF

:Disables.

( 15)

SPOTIFY SRC

ON

:Enables SPOTIFY 1/SPOTIFY 2/SPOTIFY in source selection.;

OFF

:Disables.

( 16)

BUILT-IN AUX

ON

:Enables AUX in source selection.;

OFF

:Disables.

( 13)

CD READ

1

: Automatically distinguishes between audio file disc and music CD. ;

2

: Forces to play as a music CD. No sound can be heard if an audio file disc

is played.

F/W UPDATE

UPDATE SYSTEM/UPDATE HD

(for / )

F/W UPDATE

xxxx/

F/W UPDATE

Vxx

YES

:Starts upgrading the firmware.;

NO

:Cancels (upgrading is not

activated).

For details on how to update the firmware, visit

<www.kenwood.com/cs/ce/>.

FACTORY RESET YES

:Resets the settings to default (except the stored station).;

NO

:Cancels.

CLOCK

CLOCK DISPLAY

(Except for )

ON

:The clock time is shown on the display even when the unit is turned

off.;

OFF

:Cancels.

ENGLISH

Select the display language for

[FUNCTION]

menu and music information

if applicable.

By default,

[ENGLISH]

is selected.

ESPANOL

JS_KWD_KDC_X702_KN_EN_9.indd 5JS_KWD_KDC_X702_KN_EN_9.indd 5 7/14/2017 2:20:32 PM7/14/2017 2:20:32 PM

6

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Register the marine remote ID

(for )

Applicable only when you connect Kenwood Marine Remote Control unit

(KCA-RC55MR, optional accessory) to this unit.

• For connection,

42, Connecting external components

.

• Refer also to the supplied instruction manual of the Kenwood Marine

Remote Control unit for more information.

Preparation:

Press

repeatedly to enter STANDBY, then press the volume knob

to enter

[FUNCTION].

1 Turn the volume knob to select an item, then press the knob.

[SYSTEM]



[REMOTE SETTING]



[REMOTE ID SET]

Remote control ID list is displayed.

•

[YES]

indicates that this ID is already registered.

•

[NO]

indicates that this ID is available.

2 Turn the volume knob to select an available ID

[REMOTE ID1]

/

[REMOTE ID2]

/

[REMOTE ID3]

, then press the knob

.

“REGISTERING” appears on the display window.

To register, on the Kenwood Marine Remote Control unit:

• Press ENTER to register as

[REMOTE ID1]

.

• Press SRC to register as

[REMOTE ID2]

.

• Press DISP to register as

[REMOTE ID3]

.

Once the ID is registered, “COMPLETED” appears.

To delete the registered ID

1 Turn the volume knob to select an item, then press the knob.

[SYSTEM]



[REMOTE SETTING]



[REMOTE ID DELETE]

2 Turn the volume knob to select the ID to delete [

ID1 DELETE]

/

[

ID2 DELETE]

/[

ID3 DELETE]

, then press the knob.

3 Turn the volume knob to select

[YES]

to delete the selected ID, and

select

[NO]

to cancel.

• To exit, press and hold

.

• To return to the previous setting item, press

.

GETTING STARTED HD Radio™ tuner

(for / )

Search for a station

1

Press repeatedly to select HD RADIO.

2 Press repeatedly (or press / on the remote

control) to select FM1/FM2/FM3/AM.

3 Press S/T (or press S/ on the remote control) to

search for a station or channel.

• To change the searching method for S/T: Press

repeatedly.

AUTO1 : Automatically search for a station or channel.

AUTO2 : Search for a preset station or channel.

MANUAL : Manually search for a station or channel.

• To store a station or channel: Press and hold one of the number

buttons (1to6).

• To select a stored station or channel: Press one of the number buttons

(1to6) (or press one of the number buttons (1to6) on the remote

control).

You can tune in to both conventional and HD Radio broadcasts.

• To find HD Radio stations in your area, visit <http://www.hdradio.com>.

ENGLISH

JS_KWD_KDC_X702_KN_EN_9.indd 6JS_KWD_KDC_X702_KN_EN_9.indd 6 7/14/2017 2:20:33 PM7/14/2017 2:20:33 PM

ENGLISH

7

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

HD Radio™ tuner

(for / )

Direct Access Tuning

(using the remote control)

1 Press DIRECT to enter Direct Access Tuning.

2 Press the number buttons to enter a frequency.

3 Press to search for a station or channel.

• To cancel, press

or DIRECT.

• If no operation is done for 10seconds after step

2, Direct Access Tuning

is automatically canceled.

Select an HD Radio multicast channel

Many HD Radio stations offer more than one channel programming.

This service is called multicasting. While receiving HD Radio multicast

channels....

Press S/T to select your desired channel (HD1 to HD8).

“LINKING” appears while linking to a multicast channel.

Receive an Emergency Alert message

You can receive an emergency alert message while listening to another

source or while in STANDBY, via HD Radio Broadcast.

Activate emergency alert message reception

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[TUNER SETTING]

, then press the knob.

3

Turn the volume knob to select

[EMERGENCY ALERT]

,

then press the knob.

4 Turn the volume knob to select

[ON]

, then press the knob.

5 Press and hold to exit.

• To deactivate emergency alert message reception, select

[OFF]

in step 4.

• To return to the previous setting item, press

.

Receive an emergency alert message

When an emergency alert message is received, it appears and remains on

the display until the user performs the “Ignore” function.

• Press

(or press SRC on the remote control) to ignore the alert

message.

The same emergency alert message will not interrupt again for 12 hours.

Display received emergency alert messages

The received emergency alert messages are stored in the Alert Message

List, and you can check them later. While listening to the HD RADIO

source...

1 Press to display the Alert Message List.

2 Turn the volume knob to select a message.

3 Press the volume knob to display the information related to the

message.

4 Press again to exit.

• “NO LIST” appears when the list is empty.

• This feature can store up to four messages in the list.

• To clear the message list, set

[FACTORY RESET]

to

[YES]

.

( 5)

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item

( 8)

, then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press

.

JS_KWD_KDC_X702_KN_EN_9.indd 7JS_KWD_KDC_X702_KN_EN_9.indd 7 7/14/2017 2:20:33 PM7/14/2017 2:20:33 PM

8

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

RADIO

(for / / )

Search for a station

1

Press repeatedly to select RADIO.

2 Press repeatedly (or press / on the remote

control) to select FM1/FM2/FM3/AM.

3 Press S/T (or press S/ on the remote control) to

search for a station.

• To change the searching method for S/T: Press

repeatedly.

AUTO1 : Automatically search for a station.

AUTO2 : Search for a preset station.

MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6) (or

press one of the number buttons (1to6) on the remote control).

Direct Access Tuning

(using the remote control)

1 Press DIRECT to enter Direct Access Tuning.

2 Press the number buttons to enter a frequency.

3 Press to search for a station.

• To cancel, press

or DIRECT.

• If no operation is done for 10seconds after step

2, Direct Access Tuning

is automatically canceled.

HD Radio™ tuner

(for / )

Default:

XX

TUNER SETTING

IF BAND

AUTO

:Increases the tuner selectivity to reduce interference noises from

adjacent FM stations. (Stereo effect may be lost.);

WIDE

:Subjects to

interference noises from adjacent FM stations, but sound quality will not

be degraded and the stereo effect will remain.

AUTO MEMORY YES

:Automatically starts memorizing 6 stations with good reception.;

NO

:Cancels.

•

Selectable only if

[NORMAL]

is selected for

[PRESET TYPE]

.

( 5)

RECEIVE MODE

Sets the receive mode of the HD Radio receiver.

AUTO

:Automatically tunes to analog broadcast when there is no digital

broadcast.;

DIGITAL

:Tunes in to digital broadcast only.;

ANALOG

:Tunes

in to analog broadcast only.

CLOCK

TIME SYNC

ON

:Synchronizes the unit’s time to the Radio Broadcast Data System

station time.;

OFF

:Cancels.

ENGLISH

JS_KWD_KDC_X702_KN_EN_9.indd 8JS_KWD_KDC_X702_KN_EN_9.indd 8 7/14/2017 2:20:33 PM7/14/2017 2:20:33 PM

ENGLISH

9

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

2

Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press

.

Default:

XX

TUNER SETTING

AUTO MEMORY

YES

:Automatically starts memorizing 6 stations with good reception.;

NO

:Cancels.

•

Selectable only if

[NORMAL]

is selected for

[PRESET TYPE]

.

( 5)

MONO SET

ON

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

TI ON

:Allows the unit to temporarily switch to Traffic Information if

available (“TI” lights up).;

OFF

:Cancels.

PTY SEARCH

Select the available Program Type (see the following), then press

S

/

T

to start.

CLOCK

TIME SYNC

ON

:Synchronizes the unit’s time to the Radio Broadcast Data System

station time.;

OFF

:Cancels.

RADIO

(for / / )

Available Program Type for

[PTY SEARCH]

SPEECH

:

NEWS

,

INFORM

(information),

SPORTS

,

TALK

,

LANGUAGE

,

REL TALK

(religious talk),

PERSNLTY

(personality),

PUBLIC

,

COLLEGE

,

HABL ESP

(spanish talk),

WEATHER

MUSIC

:

ROCK

,

CLS ROCK

(classic rock),

ADLT HIT

(adult hits),

SOFT RCK

(softrock),

TOP 40

,

COUNTRY

,

OLDIES

,

SOFT

,

NOSTALGA

(nostalgia),

JAZZ

,

CLASSICL

(classical),

R & B

(rhythm and blues),

SOFT R&B

(soft rhythm and blues),

REL MUSC

(religious music),

MUSC ESP

(spanish music),

HIP HOP

The unit will search for the Program Type categorized under

[SPEECH]

or

[MUSIC]

if selected.

•

[MONO SET]

/

[TI]

/

[PTY SEARCH]

is selectable only when the band is FM1/

FM2/FM3.

• If the volume is adjusted during reception of traffic information, the

adjusted volume is memorized automatically. It will be applied the next

time traffic information is turned on.

JS_KWD_KDC_X702_KN_EN_9.indd 9JS_KWD_KDC_X702_KN_EN_9.indd 9 7/14/2017 2:20:33 PM7/14/2017 2:20:33 PM

10

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD/USB/iPod/ANDROID

Selectable source:

•

/ / : CD/USB 1/USB 2/iPod 1/iPod 2/ANDROID 1/

ANDROID 2

•

/ : CD/USB/iPod USB/ANDROID

To On the faceplate On the remote control

Playback/pause Press .

Press

.

Reverse/Fast-forward

*

4

Press and hold S/T. Press and hold S/ .

Select a track/file

Press S/T. Press S/

.

Select a folder

*

5

Press J/K.

Press

/ .

Repeat play

*

6

Press repeatedly.

TRACK REPEAT

/

ALL REPEAT

: Audio CD

FILE REPEAT

/

FOLDER REPEAT

/

ALL REPEAT

: MP3/WMA/AAC/WAV/

FLAC file

FILE REPEAT

/

FOLDER REPEAT

/

REPEAT OFF

: iPod or ANDROID

Random play

*

6

Press repeatedly.

DISC RANDOM

/

RANDOM OFF

: Audio CD

FOLDER RANDOM

/

RANDOM OFF

: MP3/WMA/AAC/WAV/FLAC file,

iPod or ANDROID

Press and hold

to select

ALL RANDOM

.

*

7

*

1

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

*

2

Do not leave the cable inside the car when not using.

*

3

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the

instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application

on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

ENGLISH

Start playback

The source changes automatically and playback starts.

CD

CA-U1EX (max.: 500mA)

(optional accessory)

USB cable

*

2

(commercially available)

KCA-iP102/KCA-iP103

(optional accessory)

*

1

or accessory of the iPod/

iPhone

*

2

USB

iPod/iPhone

ANDROID

*

3

USB 1 cable from the

rear of the unit

(USB input terminal).

/

:

You can also connect to

the USB 2 cable from the

rear of the unit

(USB input terminal).

Label side

M

Eject disc

JS_KWD_KDC_X702_KN_EN_9.indd 10JS_KWD_KDC_X702_KN_EN_9.indd 10 7/14/2017 2:20:34 PM7/14/2017 2:20:34 PM

ENGLISH

11

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD/USB/iPod/ANDROID

*

4

For ANDROID: Applicable only when

[BROWSE MODE]

is selected.

*

5

For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.

*

6

For iPod/ANDROID: Applicable only when

[MODE OFF]

/

[BROWSE MODE]

is selected.

*

7

For CD: Only for MP3/WMA/AAC files.

Select control mode

While in iPod 1/iPod 2/iPodUSB source, press 5 repeatedly.

MODE ON

: Control iPod using the iPod itself. However, you can still play/

pause, file skip, fast-forward or reverse from this unit.

MODE OFF

: Control iPod from this unit.

While in ANDROID 1/ANDROID 2/ANDROID source, press 5 repeatedly.

BROWSE MODE

: Control Android device from this unit via KENWOOD

MUSIC PLAY application installed in the Android device.

HAND MODE

: Control Android device using the Android device itself via

other media player applications installed in the Android

device. However, you can still play/pause and file skip from

this unit.

Select music drive

While in USB 1/USB 2/USB source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage

Class).

• Selected drive of a multiple drives device.

Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the

iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Select a file from a folder/list

For iPod/ANDROID, applicable only when

[MODE OFF]

/

[BROWSE MODE]

is

selected.

1 Press .

2 Turn the volume knob to select a folder/list, then press the knob.

3 Turn the volume knob to select a file, then press the knob.

Quick Search

(applicable only for CD, USB 1, USB 2, USB, ANDROID 1,

ANDROID 2 and ANDROID source)

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

Skip Search

(applicable only for iPod 1, iPod 2, iPod USB, ANDROID 1,

ANDROID 2 and ANDROID source)

Press S/T to search at a preset skip search ratio.

( 12,

[SKIP SEARCH])

• Pressing and holding S/T searches at a 10

%

ratio.

Alphabet search

(applicable only for iPod 1, iPod 2, iPod USB,

ANDROID 1, ANDROID 2 and ANDROID source)

You can search for a file according to the first character.

For iPod 1/iPod 2/iPod USB source

1 Turn the volume knob quickly to enter character search.

2 Turn the volume knob to select the character.

• Select “

*

” to search for a character other than AtoZ, 0to9.

3 Press S/T to move to the entry position.

• You can enter up to 3characters.

4 Press the volume knob to start searching.

JS_KWD_KDC_X702_KN_EN_9.indd 11JS_KWD_KDC_X702_KN_EN_9.indd 11 7/14/2017 2:20:34 PM7/14/2017 2:20:34 PM

12

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD/USB/iPod/ANDROID

For ANDROID 1/ANDROID 2/ANDROID source

1 Press J/K to enter character search.

2 Turn the volume knob to select the character.

^A^: Upper case letters (A to Z)

_A_: Lower case letters (a to z)

-0-: Numbers (0 to 9)

***

: Character other than AtoZ, 0to9

3 Press the volume knob to start searching.

• To return to the root folder/first file/top menu, press 5.

(Not applicable for

BT AUDIO source.)

• To return to the previous setting item, press .

• To cancel, press and hold

.

Direct Music Search

(using the remote control)

1 Press DIRECT.

2 Press the number buttons to enter a track/file number.

3 Press to search for music.

• To cancel, press or DIRECT.

• Not available if Random Play is selected.

• Not applicable for iPod 1, iPod 2, iPodUSB, ANDROID 1, ANDROID 2 and

ANDROID source.

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car

receiver’s operations from the iPhone/iPod (via USB input terminal).

Preparation:

Install the latest version of KENWOOD Remote application on your device

before connecting. For more information, visit

<www.kenwood.com/cs/ce/>.

You can make the settings in the same way as connection via Bluetooth.

( 27)

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press

.

Default:

XX

USB

MUSIC DRIVE DRIVE CHANGE

:The next drive (

[DRIVE 1]

to

[DRIVE 4]

) is selected

automatically and playback starts.

Repeat steps

1

to

3

to select the following drives.

SKIP SEARCH 0.5%

/

1%

/

5%

/

10%

: While listening to iPod 1, iPod 2, iPodUSB,

ANDROID1, ANDROID2 or ANDROID source, selects the skip search ratio over

the total files.

ENGLISH

JS_KWD_KDC_X702_KN_EN_9.indd 12JS_KWD_KDC_X702_KN_EN_9.indd 12 7/14/2017 2:20:34 PM7/14/2017 2:20:34 PM

ENGLISH

13

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUX

Preparation:

Select

[ON]

for

[BUILT-IN AUX]

for

[SOURCE SELECT]

.

( 5)

Start listening

1

Connect a portable audio player (commercially available).

2 Press repeatedly to select AUX.

3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[SYSTEM]

, then press the knob.

3 Turn the volume knob to select

[AUX NAME SET]

, then press the knob.

4 Turn the volume knob to select an item, then press the knob.

AUX

(default)/

DVD

/

PORTABLE

/

GAME

/

VIDEO

/

TV

5 Press and hold to exit.

To return to the previous setting item, press

.

3.5mm (1/8") stereo mini plug with “L”

shaped connector (commercially available)

Portable audio player

Auxiliary cable from

the rear of the unit

Pandora®

Preparation:

Install the latest version of the Pandora application on your device

(iPhone/iPod touch), then create an account and log in to Pandora.

• Select

[ON]

for

[PANDORA SRC]

in

[SOURCE SELECT]

.

( 5)

Start listening

1

Open the Pandora application on your device.

2 Connect your device to the USB input terminal.

3 Press repeatedly to select PANDORA 1/PANDORA 2/

PANDORA.

Broadcast starts automatically.

*

1

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

*

2

Do not leave the cable inside the car when not using.

KCA-iP102/KCA-iP103

(optional accessory)

*

1

or

accessory of the iPod/iPhone

*

2

/ / : You can

also connect to the USB 2 cable from the rear of the unit.

USB 1 cable from the rear

of the unit.

JS_KWD_KDC_X702_KN_EN_9.indd 13JS_KWD_KDC_X702_KN_EN_9.indd 13 7/14/2017 2:20:34 PM7/14/2017 2:20:34 PM

14

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Pandora®

Bookmark current song information

Press and hold the volume knob.

“BOOKMARKED” appears and the information is stored to your device.

• The bookmark is available on your Pandora account but not on this

unit.

Delete a station

While listening to PANDORA...

1 Press .

2 Turn the volume knob to select

[STATION DELETE]

, then press the

knob.

3 Turn the volume knob to select

[SORT BY DATE]

or

[SORT BY A-Z]

, then

press the knob.

4 Turn the volume knob to select the desired station to delete, then

press the knob.

5 Turn the volume knob to select

[YES]

, then press the knob.

6 Press and hold to exit.

To return to the previous setting item, press

.

To On the faceplate On the remote control

Playback/pause

Press

. Press

.

Skip a track

Press T.

Press

.

Thumbs up or

thumbs down

*

Press J/K.

Press

/ .

*

If thumbs down is selected, the current track is skipped.

Create and save a new station

1

Press .

2 Turn the volume knob to select

[NEW STATION]

, then press the knob.

3 Turn the volume knob to select

[FROM ARTIST]

or

[FROM TRACK]

, then

press the knob.

A new station is created based on the artist or current song.

4 Press and hold one of the number buttons (1to5) to store.

To select a stored station: Press one of the number buttons (1to5).

Search for a registered station

1

Press .

2 Turn the volume knob to select an item, then press the knob.

[SORT BY DATE]

: According to the registered date

[SORT BY A-Z]

: By alphabetical order

3 Turn the volume knob (or press J / K on the remote control) to

select the desired station.

4 Press the volume knob (or press on the remote control) to

confirm.

To cancel, press and hold .

ENGLISH

JS_KWD_KDC_X702_KN_EN_9.indd 14JS_KWD_KDC_X702_KN_EN_9.indd 14 7/14/2017 2:20:35 PM7/14/2017 2:20:35 PM

ENGLISH

15

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iHeartRadio®

Preparation:

Install the latest version of iHeartAuto application on your device

(iPhone/iPod touch), then create an account and log in to iHeartRadio.

• Select

[ON]

for

[IHEART SRC]

in

[SOURCE SELECT]

.

( 5)

Start listening

1

Open the iHeartAuto application on your device.

2 Connect your device to the USB input terminal.

3 Press repeatedly to select IHEARTRADIO 1/IHEARTRADIO 2/

IHEARTRADIO.

Broadcast starts automatically.

*

1

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

*

2

Do not leave the cable inside the car when not using.

To On the faceplate On the remote control

Playback/pause

Press

. Press

.

Skip a track for

custom station

Press T.

Press

.

Thumbs up or

thumbs down

Press J/K.

( Not available )

Create a new/custom

station

Press 1.

( Not available )

Scan for live station

1 Press 2 to start

scanning.

2 Press 2 again

to listen to the

station.

( Not available )

Search and store a station

1

Press .

2 Turn the volume knob to select a category, then press the knob.

3 Turn the volume knob (or press J / K on the remote control) to

select the desired station.

4 Press the volume knob (or press on the remote control) to

confirm.

When a city list appears, you can search cities in alphabetical order by

turning the volume knob quickly.

To cancel, press and hold

.

To store a station: Press and hold one of the number buttons (3, 4or5).

To select a stored station: Press one of the number buttons (3, 4or5).

KCA-iP102/KCA-iP103

(optional accessory)

*

1

or

accessory of the iPod/iPhone

*

2

/ / : You can

also connect to the USB 2 cable from the rear of the unit.

USB 1 cable from the rear

of the unit.

JS_KWD_KDC_X702_KN_EN_9.indd 15JS_KWD_KDC_X702_KN_EN_9.indd 15 7/14/2017 2:20:35 PM7/14/2017 2:20:35 PM

16

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Spotify

Preparation:

Install the latest version of the Spotify application on your device (iPhone/

iPod touch), then create an account and log in to Spotify.

• Select

[ON]

for

[SPOTIFY SRC]

in

[SOURCE SELECT]

.

( 5)

Start listening

1

Open the Spotify application on your device.

2 Connect your device to the USB input terminal.

3 Press repeatedly to select SPOTIFY 1/SPOTIFY 2/SPOTIFY.

Broadcast starts automatically.

*

1

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

*

2

Do not leave the cable inside the car when not using.

To On the faceplate On the remote control

Playback/pause

Press

. Press

.

Skip a track

Press S

*

4

/ T. Press S

*

4

/ .

Thumbs up or

thumbs down

*

3

Press J/K.

Press

/ .

Start radio Press and hold 5. ( Not available )

Repeat play

*

5

Press

repeatedly.

REPEAT ALL

/

REPEAT

ONE

*

4

/

REPEAT OFF

( Not available )

Random play

*

5

Press

repeatedly.

*

4

SHUFFLE ON

/

SHUFFLE

OFF

( Not available )

*

3

This feature is available for tracks in Radio only. If thumbs down is selected, the current

track is skipped.

*

4

Available for premium account users only.

*

5

Available for tracks in Playlists only.

Save favorite song information

While listening to the Radio on Spotify...

Press and hold the volume knob.

“SAVED” appears and the information is stored to “Your Music” or “Your

Library” on your Spotify account.

To unsave, repeat the same procedure.

“REMOVED” appears and the information is removed from “Your Music”

or “Your Library” on your Spotify account.

KCA-iP102/KCA-iP103

(optional accessory)

*

1

or

accessory of the iPod/iPhone

*

2

/ / : You can

also connect to the USB 2 cable from the rear of the unit.

USB 1 cable from the rear

of the unit.

ENGLISH

JS_KWD_KDC_X702_KN_EN_9.indd 16JS_KWD_KDC_X702_KN_EN_9.indd 16 7/14/2017 2:20:35 PM7/14/2017 2:20:35 PM

La page est en cours de chargement...

Kenwood KDC-X502 Le manuel du propriétaire

Ce manuel convient également à

Kenwood KDC-X502 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents