Sears Craftsman CMXEVBE175900 Manuel utilisateur

Part No. SP7075 Printed in Mexico

INSTRUCTION MANUAL | GUIDE D’UTILISATION | MANUAL DE INSTRUCCIONES

IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.

POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER.

SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.

6 GALLON (22.5 Liter), 9 GALLON (34 Liter),

12 GALLON (45 Liter), 16 GALLON (60 Liter)

OR 20 GALLON (75 Liter) WET/DRY VAC

ASPIRATEUR DE LIQUIDES ET DE POUSSIÈRES DE

22,5 Litres (6 GALLONS), 34 Litres (9 GALLONS),

45 Litres (12 GALLONS), 60 Litres (16 GALLONS)

OU 75 Litres (20 GALLONS)

ASPIRADORA PARA SECO/MOJADO DE

22,5 Litros (6 GALONES), 34 Litros (9 GALONES),

45 Litros (12 GALONES), 60 Litros (16 GALONES)

Ó 75 Litros (20 GALONES)

NÚMEROS DE MODELOS

22,5 y 34 Litros

(6 y 9 Galones)

CMXEVBE175840

CMXEVBE175900

45, 60 y 75 Litros

(12, 16 y 20 Galones)

CMXEVBE175940

CMXEVBE175950

CMXEVBE175960

NUMÉROS DE MODÈLES

22,5 et 34 Litres

(6 et 9 Gallons)

CMXEVBE175840

CMXEVBE175900

45, 60 et 75 Litres

(12, 16 et 20 Gallons)

CMXEVBE175940

CMXEVBE175950

CMXEVBE175960

MODEL NUMBERS

6 and 9 Gallon

(22.5 and 34 Liter)

CMXEVBE175840

CMXEVBE175900

12, 16 and 20 Gallon

(45, 60 and 75 Liter)

CMXEVBE175940

CMXEVBE175950

CMXEVBE175960

1-888-331-4569 WWW.CRAFTSMAN.COM

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 1 2/22/19 10:31 AM

2

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk

of personal injury or property damage.

Fig. A

1

2

3

4

5

6

7

8

9

10

11

12

Components

1 ON/OFF Switch

2 Carry Handle/Power Cord Wrap

3 Powerhead Assembly

4 Hose Storage Clips

5 Inlet Port

6 Dust Drum

7 Caster Foot w/Storage

8 Caster

9 Drain

10 Drum Latch

11 Power Cord

12 Blowing Port

!

DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious

injury.

WARNING: Indicates a hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION: Indicates a hazardous situation which, if not avoided, may result in minor or moderate

injury.

(Used without word) Indicates a safety related message.

NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

!

If you have any questions or comments about this or

any product, call CRAFTSMAN toll free at:

1-888-331-4569.

WARNING: Read all safety

warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock,

fire and/or serious injury.

WARNING: Never modify the

product or any part of it. Damage or personal injury

could result.

WARNING: To reduce the risk of

injury, read the instruction manual.

!

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 2 2/22/19 10:31 AM

3

• Read and understand this manual and all labels on the

Vac before operating.

• Use only as described in this manual.

• Do not leave Vac running while unattended - you may fail

to notice important signs indicating abnormal operation

such as loss of suction, debris/liquid exiting exhaust, or

abnormal motor noises. Immediately stop using Vac if you

notice these signs.

• Do not leave Vac when plugged in. Unplug from outlet

when not in use and before servicing.

• Sparks inside the motor can ignite flammable vapors or

dust. To reduce the risk of fire or explosion, do not use near

combustible liquids, gases, or dusts, such as gasoline or

other fuels, lighter fluid, cleaners, oil-based paints, natural

gas, coal dust, magnesium dust, grain dust, aluminum dust,

or gun powder.

• Do not vacuum anything that is burning or smoking, such as

cigarettes, matches, or hot ashes.

• To avoid the risk of self-ignition of drum debris, empty drum

after each use. Combustible materials, such as rags or saw

dust containing stain or urethane, can be sources of such

overheating.

• Do not vacuum drywall dust, cold fireplace ash, or other fine

dusts with standard filter. These may pass through the filter

and be exhausted back into the air. Use a fine dust filter

instead.

• To reduce the risk of inhaling toxic vapors, do not vacuum or

use near toxic or hazardous materials.

• This Wet/Dry Vac is not intended for use by persons

(including children) with reduced physical, sensory,

or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

• To reduce the risk of electric shock, do not expose to rain or

allow liquid to enter motor compartment. Store indoors.

• Do not allow to be used as a toy. Close attention is

necessary when used by or near children.

• Do not use with a torn filter or without the filter

installed except when vacuuming liquids as described

in this manual. Dry debris ingested by the impeller may

damage the motor or be exhausted into the air.

• Turn off Vac before unplugging.

• To reduce the risk of injury from accidental starting,

unplug power cord before changing or cleaning filter.

• Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

• Do not use with damaged cord, plug, or other parts.

If your Vac is not working as it should, has missing parts,

has been dropped, damaged, left outdoors, or dropped

into water, call customer service at 1-888-331-4569

(Mexico 001-881-331-4569).

• Do not handle plug, switch, or the Vac with wet hands.

• Do not pull or carry by cord, use cord as handle, close a

door on cord, or pull cord around sharp edges or corners.

Do not run Vac over cord. Keep cord away from heated

surfaces.

• Use only extension cords that are rated for outdoor

use. Extension cords in poor condition or too small in

wire size can pose fire and shock hazards. To reduce

the risk of these hazards, be sure the cord is in good

condition and that liquid does not contact the connection.

Do not use an extension cord with conductors smaller

than 1,3 mm

2

(16 AWG) in size.

• This Vac is double-insulated, eliminating the need

for a separate grounding system. Use only identical

replacement parts. Read the instructions for Servicing

Double-Insulated Wet/Dry Vacs.

• Do not put any object into ventilation openings. Do not

vacuum with any ventilation openings blocked; keep

free of dust, lint, hair, or anything that may reduce air

flow.

• Keep hair, loose clothing, fingers, and all parts of body

away from openings and moving parts.

• To reduce the risk of falls, use extra care when cleaning

on stairs.

• To reduce the risk of back injury or falls, do not lift a Vac

that is heavy with liquid or debris. Partially empty by

scooping debris or draining liquid.

• To reduce the risk of personal injury or damage to Vac,

use only CRAFTSMAN recommended accessories.

• When using as a blower:

- Direct air discharge only at work area.

- Do not direct air at bystanders.

- Keep children away when blowing.

- Do not use blower for any job except blowing dirt and

debris.

- Do not use as a sprayer.

• To reduce the risk of eye injury, wear safety eyewear.

The operation of any utility Vac or blower can result in

foreign objects being blown into the eyes, which can

result in severe eye damage.

• To reduce the risk of being struck by, or pulled down

by, a rolling Vac, block the casters when using on any

uneven or sloped surface.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electric shock, or injury:

!

When using this Vac, always follow basic safety

precautions including the following:

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 3 2/22/19 10:31 AM

4

Observe the following warnings that appear on the motor

housing of your Vac:

DOUBLE INSULATED - GROUNDING NOT REQUIRED.

WHEN SERVICING USE ONLY IDENTICAL

REPLACEMENT PARTS.

Section Page

Important Safety Instructions.......................2-4

Introduction .......................................4

Carton Contents ....................................5

Installation ......................................6-7

Caster/Caster Foot Assembly ........................6

Hose Clip Assembly ...............................6

Carry Handle Assembly ............................6

Vac Assembly.....................................7

Insert Hose.......................................7

Accessory Storage .................................7

Operation ......................................8-11

Polarized Plug ....................................8

Vacuuming Dry Materials ..........................8

Vacuuming Liquids................................9

Emptying the Drum ...............................9

Moving the Wet/Dry Vac ..........................10

Muffler / Diffuser.................................10

Blowing Feature .................................11

Maintenance...................................12-14

Filter ...........................................12

Removal and Installation of

Qwik Lock Filter™ ..............................12

Filter Bag .......................................13

Filter Bag Installation .............................13

Filter Bag Removal ...............................13

Filter Cleaning...................................14

Cleaning a Dry Filter..............................14

Cleaning a Wet Filter .............................14

Cleaning and Disinfecting

the Wet/Dry Vac ................................14

Casters .........................................14

Storage.........................................14

Service / Repair Parts............................15-17

Servicing Double Insulated

Wet/Dry Vacs. ....................................15

Warranty .........................................19

This Wet/Dry Vac is intended for house-hold use. It may be

used for vacuuming of wet or dry media and may be used

as a Blower.

Read this Instruction Manual to familiarize yourself with

the product features and to understand the specific usage

of your new Wet/Dry Vac.

SAVE THESE INSTRUCTIONS

INTRODUCTION

TABLE OF CONTENTS

WARNING:

To reduce the risk of electric shock - do not expose

to rain - store indoors.

WARNING:

• For your own safety, read and understand Instruction

Manual.

• Do not run unattended.

• Do not pick up hot ashes, coals, flammable,

combustible / self-igniting, toxic, or other hazardous

materials.

• Do not use around explosive liquids or vapors.

!

CAUTION:

• To reduce the risk of hearing damage, wear ear

protectors when using for extended time or in a

noisy area.

• For dusty operations, wear dust mask.

• Static shocks are common when the relative

humidity of the air is low. Vacuuming fine

debris with your Vac can deposit static charge

on the hose or Vac. To reduce the frequency of

static shocks in your home or when using this

Vac, add moisture to the air with a humidifier.

!

FREE WARNING LABEL REPLACEMENT: If your warning

labels become illegible or are missing, call 1-888-331-4569

for a free replacement.

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 4 2/22/19 10:31 AM

CMXEVBE175840 CMXEVBE175900 CMXEVBE175940 CMXEVBE175950 CMXEVBE175960

6 Gallon 9 Gallon 12 Gallon 16 Gallon 20 Gallon

Key Description (22.5 Liter) (34 Liter) (45 Liter) (60 Liter) (75 Liter)

A Vac Assembly 1 1 1 1 1

B Hose Assembly 1 1 1 1 1

C Utility Nozzle 1 1 1 1 1

D Wet Nozzle Not Included 1 1 1 1

E Car Nozzle 1 1 1 1 1

F Crevice Tool Not Included Not Included Not Included Not Included 1

G Extension Wands 2 2 2 2 2

H Muffler/Diffuser Not Included Not Included Not Included Not Included 1

I Caster Foot w/Storage 4 4 4 4 4

J Caster 4 4 4 4 4

K Hose Clip Assembly Not Included Not Included 2 2 2

L Carry Handle 1 1 1 1 1

M Disposable Filter Bag 1 1 1 1 1

N* Qwik Lock Filter 1 1 1 1 1

O Instruction Manual 1 1 1 1 1

* Items may come preassembled.

Images shown may not reflect actual part.

5

Remove entire contents of carton. Check each item against

the Carton Contents List.

N

L

B

K

J

C

D

E

F

G

H

I

A

M

If any parts are damaged or missing, immediately call

customer service at 1-888-331-4569

(Mexico 001-881-331-4569).

20 Gallon (75 Liters) Shown

Phillips Screwdriver

Tools Required:

N

O

CARTON CONTENTS (Fig. B)

Fig. B

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 5 2/22/19 10:31 AM

6

Screws

Carry

Handle

Powerhead

Assembly

Caster/Caster Foot Assembly (Fig. C)

1. Remove the Powerhead Assembly from the Dust Drum

and set aside.

2. Turn the Dust Drum upside down on the floor.

3. Insert the Caster Feet into the bottom of Drum, as

shown (4 places).

4. Push on the Caster Foot until the Foot is flush with

bottom of the Dust Drum.

5. Insert the Caster Stem into the Socket of the Caster

Foot, as shown (4 places).

6. Push on the Caster until the Ball on the Caster Stem

is inserted all the way into the Socket. You will hear

the Ball snap into the Socket and the Caster will swivel

easily when positioning is correct.

7. Turn the Drum upright.

Caster

Caster Stem

Caster Ball

Caster

Foot

Hole

Dust

Drum

Carry Handle Assembly (Fig. E)

1. Place the Carry Handle on the Wet/Dry Vac Powerhead

Assembly.

2. Tighten both Screws to assemble the Carry Handle on

the Powerhead Assembly.

20 Gallon (75 Liters) Shown

Hose Clip Assembly (Fig. D)

(Models CMXEVBE175940, CMXEVBE175950,

CMXEVBE175960)

1. Align the Hose Clips in the recessed areas on the

Powerhead Assembly.

2. Insert Screw and tighten to fasten the Hose Clip to the

Powerhead Assembly.

Screw

Hose

Clip

Powerhead

Assembly

INSTALLATION

Fig. D

Fig. C

Fig. E

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 6 2/22/19 10:31 AM

7

Insert Hose (Fig. G)

Insert the Locking End of the Hose Assembly into the Vac

Inlet. The Hose should snap into place.

To remove the Hose from the Vac, press the Release Button

on the Hose Assembly and pull the Hose out of the Vac

Inlet, as shown.

Vac Inlet

Release

Button

Hose

Caster Feet Storage

for Accessories

Hose

Hose Clips

Powerhead Assembly

Storage for Accessories

Accessory Storage (Fig. H)

Your Accessories may be stored in the Caster Feet or

in the storage locations on the Powerhead Assembly

(in applicable models).

The Hose may also be stored by wrapping it around the

unit and securing it into the Hose Clips (in applicable

models).

Vac Assembly (Fig. F)

1. Line up front (label side) of Powerhead Assembly with

Vac Inlet located on the front of the Drum.

NOTE: Powerhead Assembly must be aligned with Drum

for proper attachment.

2. Place Powerhead Assembly on top of Drum.

3. Be sure Powerhead Assembly completely covers the

top of the Drum so leakage does not occur.

4. Press down on the Lid Latches to securely attach the

Powerhead Assembly to the Drum.

5. To remove the Powerhead Assembly, first unplug the

unit from the electrical outlet. Then lift up on the Lid

Latches and remove from Drum.

Powerhead

Assembly

Lid

Latches

Vac

Inlet

Label

20 Gallon (75 Liters) Shown

Fig. F

Fig. G

Fig. H

CAUTION:

Do not operate vacuum while the hose is still wrapped

around the powerhead assembly in the storage

position.

WARNING:

Do not put any object into ventilation openings.

Do not vacuum with any ventilation openings blocked;

keep free of dust, lint, hair or anything that may reduce

air flow.

!

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 7 2/22/19 10:31 AM

=

OFF

=

ON

OPERATION

Polarized Plug

To reduce the risk of electric shock, this Vac has a Polarized

Plug (one blade is wider than the other). This Plug will

fit in a Polarized Outlet only one way. If the Plug does not

fit fully in the Outlet, reverse the Plug. If it still does not fit,

contact a qualified electrician to install the proper Outlet.

Do not change the Plug in any way.

After you Plug the Power Cord into the Outlet, turn the Unit

on by pushing the Switch from position “O” to position “l”.

The symbols used on the Switch Actuator are International

“On & Off” Symbols:

Vacuuming Dry Materials

1. The Filter must always be in correct position to reduce

the risk of leaks and possible damage to Vac.

2. When using your Vac to pick up very fine dust, it will

be necessary for you to empty the Drum and clean the

Filter at more frequent intervals to maintain peak Vac

performance.

NOTE: A dry Filter is necessary to pick up dry material.

If you use your Vac to pick up dust when the Filter is wet,

the Filter will clog quickly and be very difficult to clean.

8

• Do not leave Vac running while unattended - you

may fail to notice important signs indicating

abnormal operation such as loss of suction,

debris/liquid exiting the exhaust, or abnormal

motor noises. Immediately stop using Vac if you

notice these signs.

• Do not leave Vac plugged in when not in use.

• Do not continue running when float has cut off

suction.

•

Sparks inside the motor can ignite airborne

flammables. Do not operate Vac near flamma-

ble liquids or in areas with flammable gases,

vapors, or explosive airborne dust. Flammable

liquids, gases, and vapors include: lighter fluid,

solvent-type cleaners, oil-based paints, gasoline,

alcohol, and aerosol sprays. Explosive dusts include: coal,

magnesium, aluminum, grain, and gun powder

.

• Do not vacuum up explosive dusts, flammable

liquids, or hot ashes.

• Do not leave sawdust or rags with stain or

polyurethane residue inside Vac. Empty drum

after picking up these potentially self-heating

materials.

• Do not expose to rain or allow liquid to enter

motor compartment. Store indoors.

• Do not handle plug, switch, or Vac with wet

hands.

• Unplug Vac before servicing. If your Vac is not

working as it should, has missing parts, has

been dropped, damaged, left outdoors, or

dropped into water, call customer service at

1-888-331-4569 (Mexico 001-881-331-4569).

• When using an extension cord, use only

outdoor-rated cords that are in good condition.

Do not allow the connection to come into contact

with liquid.

CAUTION:

To reduce the risk of hearing damage, wear ear

protectors when using the Vac / Blower for extended

time or in a noisy area.

!

WARNING:

To reduce the risk of electric shock or injury:

!

WARNING:

To reduce the risk of fire, explosion,

or damage to Vac:

!

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 8 2/22/19 10:31 AM

1. When picking up small amounts of liquid the Filter

may be left in place.

2. When picking up large amounts of liquid we

recommend that the Filter be removed. If the Filter

is not removed, it will become saturated and misting

may appear in the exhaust.

3. After using the Vac to pick up liquids, the Filter must

be dried to reduce the risk of possible mildew and

damage to the Filter.

4. When the liquid in the Drum reaches a predetermined

level, the Float mechanism will rise automatically

to cut off air-flow. When this happens, turn off the

Vac, unplug the Power Cord, and empty the Drum.

You will know that the Float has risen because

Vac airflow ceases and the Motor noise will become

higher in pitch, due to increased Motor Speed.

IMPORTANT: To reduce the risk of damage to the Vac

do not run Motor with Float in raised position.

1. Remove the Powerhead Assembly. Pull Latches to

release from the Drum.

2. Lift the Powerhead Assembly up and away from the

Drum.

3. Lay Powerhead Assembly upside down on a clean area

while emptying the Drum.

4. Dump the Drum contents into the proper waste

disposal container.

5. If the Vac comes equipped with a Drain, simply

unscrew the Drain Cap and lift the opposite side

slightly to empty the Drum.

Vacuuming Liquids

Emptying the Drum (Fig. I)

9

Powerhead

Assembly

Lid

Latches

Drum

Drain

20 Gallon (75 Liters) Shown

Fig. I

WARNING:

Do not operate without filter cage and float,

as they prevent liquid from entering the impeller and

damaging the motor. For dry material pick-up,

do not operate without the filter in place to reduce the

risk of damage to the motor.

WARNING:

To reduce the risk of fire or explosion, do not vacuum

flammable or combustible liquids, gases or dust.

!

WARNING:

To reduce the risk of back injury or falls, do not lift a

Vac heavy with liquid or debris. Scoop or drain enough

contents out to make the Vac light enough to lift

comfortably.

!

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 9 2/22/19 10:31 AM

Should it become necessary to pick the Vac up to move it,

use the Dust Drum Latch Handles.

To maneuver the Vac, the Carry Handle on top of the

Powerhead Assembly should be used.

Moving the Wet/Dry Vac (Fig. J)

Dust Drum Latch

Handles (2)

Powerhead

Assembly

Carry Handle

20 Gallon (75 Liters) Shown

Fig. J

Depending on your Model, your Vac may come with a

Muffler/Diffuser. Insert the Muffler/Diffuser Locking End

into the Vac Blowing Port, when the Vac is not being used

as a Blower. The Muffler/Diffuse should snap into place.

To Remove the Muffler/Diffuser from the Blowing Port,

press the Muffler/Diffuser Release Button and pull out of

the Blowing Port.

Muffler / Diffuser (Fig. K)

Muffler / Diffuser

Muffler/Diffuser

Release Button

(Locking End)

Vac Blowing Port

20 Gallon (75 Liters) Shown

Fig. K

10

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 10 2/22/19 10:31 AM

Your Vac features a Blowing Port. It can blow sawdust and

other debris. Follow the following steps to use your Vac

as a Blower.

1. Locate Blowing Port of your Vac.

2. Insert the Locking End of the Hose Assembly into the

Vac Blowing Port. The Hose should snap into place.

To Remove the Hose from the Vac, press the Release

Button in the Hose Assembly and pull the Hose out of

the Vac Blowing Port.

3. (Optional) Attach the Extension Wand to opposite end

of Hose, then place the Car Nozzle on the Wand.

4. Turn Vac on and you are ready to use your Vac as a

Blower.

Blowing Feature (Fig. L)

Swivel

End

Of Hose

Car Nozzle

(Optional)

Extension

Wand (Optional)

Locking

Hose

End

Blowing

Port

20 Gallon (75 Liters) Shown

Fig. L

11

WARNING:

Always wear safety eyewear complying with ANSI Z87.1

(or in Canada, CSA Z94.3) before using as a blower.

!

WARNING:

To reduce the risk of injury to bystanders, keep them

clear of blowing debris.

!

CAUTION:

Wear a dust mask if blowing creates dust which might

be inhaled.

CAUTION:

To reduce the risk of hearing damage, wear ear

protectors when using the Vac / Blower for extended

time or in a noisy area.

!

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 11 2/22/19 10:31 AM

Qwik Lock™

Stud

Rubber

Gasket at

Bottom of

Filter

PUSH

DOWN

PULL

UP

Filter

Tabs (2)

Integrated Filter Plate

with Center Hole

PULL

UP

Filter

Cage

Powerhead

Assembly

MAINTENANCE

NOTE: Failure to properly seat the bottom Gasket could

result in debris bypassing the Filter.

NOTE: This Filter is made of high quality paper designed

to stop very small particles of dust. The Filter can be used

for wet or dry pick up. Handle the Filter carefully when

removing to install or clean. Creases in the Filter pleats

may occur from installation but creases will not affect the

performance of the Filter.

IMPORTANT: To reduce the risk of damage to the Blower

Wheel and Motor, always reinstall the Filter before using

the Vac for dry material pickup.

Filter Removal

1. Hold the Filter Tabs of the Qwik Lock™ Filter in each

hand.

2. With one thumb on the Qwik Lock™ Stud,

which protrudes through the integrated Filter Plate,

lift up on the Filter Tabs while pushing down on the

Stud.

3. This action will cause the Filter to release from the

Filter Cage. Slide Filter off Cage.

Removal and Installation of

the Qwik Lock™ Filter (Fig. M)

Filter Installation

1. Carefully slide the Qwik Lock™ Filter over the

Filter Cage and press down on the outside edge of

the Filter until the Rubber Gasket on the bottom

of the Filter seats securely around the base of the

Filter Cage and against the Powerhead Assembly.

2. Align the small Center Hole in the top of the Filter over

the Qwik Lock™ Stud on the Filter Cage. Press firmly

on top of the Filter near the Stud to allow the Filter to

snap over the Ball on the end of the Stud. The Filter is

now attached.

Fig. M

12

Filter

WARNING:

To reduce the risk of injury from accidental starting,

unplug power cord before changing or cleaning filter.

!

WARNING:

Do not operate without a filter cage and float,

as they prevent liquid from entering the impeller and

damaging the motor.

!

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 12 2/22/19 10:31 AM

Unfolded

Filter Bag

Vac

Cardboard

Collar

Filter Bag Installation (Fig. N)

A Filter Bag may be used in place of or in addition to the

Qwik Lock™ Cartridge Filter.

Replacement Filter Bags are available:

NOTE: See Repair Parts List for Part Number.

NOTE: When picking up dry debris a Filter Bag or

Cartridge Filter must be properly installed.

1. Filter Bag to be used to pick up dry debris only.

2. Correct positioning of Cardboard Collar is required to

assure proper seal.

3. Locate two Ribs on Inlet Tube, inside Drum.

4. Slide Cardboard Collar onto Inlet Tube and position

Cardboard Collar between the two Ribs.

5. With the Cardboard Collar securely installed, unfold

and position Filter Bag inside Drum, as shown.

Filter Bag Removal (Fig. O)

1. Slide Cardboard Collar toward center of Vac Drum.

2. Remove Filter Bag from Vac Drum and discard.

3. Install new Filter Bag.

Filter Bag

Vac

Inlet Tube

Cardboard

Collar

Filter Bag

Ribs (2)

Fig. N

Fig. O

13

WARNING:

To avoid health hazards from vapors or dust, do

not vacuum toxic, carcinogenic or other hazardous

materials such as asbestos, arsenic, barium, beryllium,

lead, pesticides or other health endangering materials.

!

CAUTION:

To avoid spilled debris, when picking up heavy or sharp

material, monitor bag volume and do not overfill.

!

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 13 2/22/19 10:31 AM

Filter Cleaning

Your Filter should be cleaned often to maintain peak Vac

performance.

Cleaning A Dry Filter

1. Some removal of dry debris can be accomplished

without removing the Filter from the Vac. Slap your

hand on top of the Powerhead Assembly while the

Vac is turned off.

2. For best cleaning results due to accumulated dust,

clean the Filter in an open area. Cleaning SHOULD be

done outdoors and not in the living quarters.

3. After Filter removal from Vac, remove the dry debris

by gently tapping Filter against the inside wall of your

Dust Drum. The debris will loosen and fall.

4. For thorough cleaning of dry Filter with fine dust

(no debris), run water through it as described under

“Cleaning A Wet Filter”.

Cleaning A Wet Filter

After Filter is removed, run water through the Filter from a

hose or spigot. Take care that water pressure from the hose is

not strong enough to damage Filter.

IMPORTANT: After cleaning, check the Filter for tears or

small holes. Tears and holes in the Filter can cause debris and

dust to be blown from the Vac. Do not use a Filter with holes

or tears. Replace immediately.

Allow the Filter to dry before reinstalling and storing the Vac

or picking up dry debris.

Cleaning and Disinfecting the

Wet/Dry Vac

To keep your Wet/Dry Vac looking its best, clean the outside

with a cloth dampened with warm water and mild soap.

To clean the Drum:

1. Dump debris out.

2. Wash Drum thoroughly with warm water and mild soap.

3. Wipe out with dry cloth.

Before prolonged storage or as needed (i.e., waste water pick

up) the Drum should be disinfected.

To disinfect the Drum:

1. Pour 1 gallon (4 L) of water and 1 teaspoon (5 mL)

chlorine bleach into the Drum.

2. Let solution stand for 20 minutes, carefully swishing

every few minutes, making sure to wet all inside surfaces

of the Drum.

3. Empty Drum after 20 minutes. Rinse with water until

bleach smell is gone. Allow Drum to dry completely

before sealing the Motor on the Drum.

Casters

If your Casters are noisy, you may put a drop of oil on the

Roller Shaft to make them quieter.

Storage

Before storing your Vac, the Drum should be emptied and

cleaned. The Power Cord should be wrapped around the

Carry Handle and the Hose should be stored as described in

this manual. Accessories should be kept in the same area as

the Vac so they can be readily available. The Vac should be

stored indoors.

14

WARNING:

To assure product SAFETY and RELIABILITY, any other

maintenance, repairs and adjustments should be

performed by Authorized Service Centers, always using

CRAFTSMAN replacement parts.

!

WARNING: SERVICING OF DOUBLE-INSULATED WET/DRY VAC

In a double-insulated Wet/Dry Vac, two systems of insulation are provided instead of grounding. No grounding means

is provided on a double-insulated appliance, nor should a means for grounding be added. Servicing a double-insulated

Wet/Dry Vac requires extreme care and knowledge of the system, and should be done only by qualified service personnel.

Replacement parts for a double-insulated Wet/Dry Vac must be identical to the parts they replace. Your double-insulated

Wet/Dry Vac is marked with the words “DOUBLE INSULATED” and the symbol (square within a square) may also

be marked on the appliance.

To reduce the risk of injury, unplug power cord before servicing the Wet/Dry Vac.

!

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 14 2/22/19 10:31 AM

15

SERVICE / REPAIR PARTS

6 Gal. / 22.5 L 9 Gal. / 34 L 12 Gal. / 45 L 16 Gal. / 50 L 20 Gal. / 75 L

Key No. CMXEVBE175840 CMXEVBE175900 CMXEVBE175940 CMXEVBE175950 CMXEVBE175960 Description

1 841579-1 841579-1 841579-1 841579-1 841579-1 Switch

2 510700 510700 510701 510701 510701 Top Handle & Hardware (2 screws)

3 510702 510703 510704 510705 510706 Motor Cover with Labels

4 829719-17 829719-17 829719-14 829719-17 829719-17 Cord with Terminal

5 841522 841522 841364 841364-1 841364-1 Duct, Exhaust

6 832630 832630 Not Included Not Included Not Included Upper Motor Gasket

7 841655 841455 829693-1 510379 510379 Motor Assembly

8 841517 841517 Not Included Not Included Not Included Lower Motor Gasket

9 Not Included Not Included 819260-13 819260-13 819260-13 Lead Assembly

10 Not Included Not Included 818961 818961 818961 Spacer

11 Not Included Not Included 818413-2 818413 818413 Blower Wheel

12 Not Included Not Included 315534-1 315534-1 315534-1 Washer

13 Not Included Not Included 826817 826817 826817 Nut, Hex Flange 5/16-18

14 Not Included Not Included 820563-5 820563-5 820563-5 Screw, Pan Hd Typ “AB” 10 x 1-1/4 (32mm) Ser.

15 841521-1 841521-1 510559 510567 510567 Lid / Lid Assembly

16 Not Included Not Included 510582 510582 510582 Hose Clip Assembly with Screws

17 Not Included Not Included 841265 841265 841265 Lid Latch

18 820563-4 820563-4 820563-4 820563-4 820563-4 Screw, Pan Hd Typ “AB” 10 x 3/4 (22mm) Ser.

19 841454 841454 840321 840321 840321 Collector

20 833521-1 833521-1 823201-2 823201-2 823201-2 Filter Cage Assembly

21 CMXZVBE38754 CMXZVBE38754 CMXZVBE38754 CMXZVBE38754 CMXZVBE38754 Replacement Filter

22 842913 510707 510708 510709 510710 Drum

23 832836 832836 828460 828460 828460 Caster Foot with Storage

24 73137 73137 73102 73102 73102 Caster

25 CMXZVBE38676 CMXZVBE38676 CMXZVBE38630 CMXZVBE38630 CMXZVBE38630 Utility Nozzle

26 CMXZVBE38681 CMXZVBE38681 CMXZVBE38620 CMXZVBE38620 CMXZVBE38620 Car Nozzle

27 CMXZVBE38675 CMXZVBE38675 CMXZVBE38606 CMXZVBE38606 CMXZVBE38606 Extension Wand

28 CMXZVBE38761 CMXZVBE38761 CMXZVBE38763 CMXZVBE38763 CMXZVBE38763 Hose Assembly

29 CMXZVBE39970 CMXZVBE39970 CMXZVBE38735 CMXZVBE38749 CMXZVBE38749 Disposable Filter Bag

30 Not Included 73185 73185 73185 73185 Cap, Drain

31 Not Included CMXZVBE38683 CMXZVBE38621 CMXZVBE38621 CMXZVBE38621 Wet Nozzle

32 Not Included Not Included Not Included Not Included CMXZVBE37035 Crevice Tool

33 Not Included Not Included Not Included Not Included CMXZVBE38660 Diffuser

34 SP7075 SP7075 SP7075 SP7075 SP7075 Instruction Manual

6 Gallon (22.5 Liter) Wet/Dry Vac

Model Number: CMXEVBE175840

Electrical Rating: 120 V~ 7.5 A 60 Hz

9 Gallon (34 Liter) Wet/Dry Vac

Model Number: CMXEVBE175900

Electrical Rating: 120 V~ 8.3 A 60 Hz

12 Gallon (45 Liter) Wet/Dry Vac

Model Number: CMXEVBE175940

Electrical Rating: 120 V~ 10.5 A 60 Hz

16 Gallon (60 Liter) Wet/Dry Vac

Model Number: CMXEVBE175950

Electrical Rating: 120 V~ 12 A 60 Hz

20 Gallon (75 Liter) Wet/Dry Vac

Model Number: CMXEVBE175960

Electrical Rating: 120 V~ 12 A 60 Hz

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 15 2/22/19 10:31 AM

16

34

9-Gallon

Only

25

26

27

28

20

22

23

24

31

19

18

15

7

3

2

1

5

4

6

8

30

29

21

6 Gallon (22.5 Liter) Wet/Dry Vac

Model Number CMXEVBE175840

9 Gallon (34 Liter) Wet/Dry Vac

Model Number CMXEVBE175900

OR

Always order by Part Number - Not by Key Number

WARNING: To reduce the risk of injury, unplug power cord before servicing the Wet/Dry Vac.

WARNING: All disassembly and repairs should be performed by qualified personnel.

!

9 Gallon

(34 Liter)

Only

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 16 2/22/19 10:31 AM

17

12 Gallon (45 Liter)

Wet/Dry Vac

Model Number

CMXEVBE175940

16 Gallon (60 Liter)

Wet/Dry Vac

Model Number

CMXEVBE175950

20 Gallon (75 Liter)

Wet/Dry Vac

Model Number

CMXEVBE175960

OR OR

22

34

33

31

26

25

27

15

17

32

30

28

23

24

20

29

3

2

1

5

18

4

16

17

9

7

10

11

12

13

19

14

21

Always order by Part Number - Not by Key Number

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 17 2/22/19 10:31 AM

CRAFTSMAN

®

LIMITED WARRANTY – 3 YEARS

This limited warranty is provided by Emerson Tool Company, a division of Emerson Electric Co., (“We” or “Our” or “Us”) to

the original consumer owner (“Customer” or “You” or “Your”) of the CRAFTSMAN product with which this limited warranty

is provided (the “CRAFTSMAN Product”).

What is Covered

We warrant to You that your CRAFTSMAN Product will be free from defects in materials and workmanship when used

under normal conditions in accordance with the terms of the Instruction Manual provided to You with the CRAFTSMAN

Product, subject to the exclusions described below, for a period of three years commencing on the date of purchase by

You (the “Warranty Period”). This limited warranty terminates if the original purchaser transfers the CRAFTSMAN Product

to any other person or entity.

What is not Covered

This limited warranty does not extend to and expressly excludes:

• Normal wear and tear and/or replacement attachments or accessories, including, without limitation, power cords,

hoses, filters, and other attachments or accessories that may be offered for sale by Us for use with the CRAFTSMAN

Product.

• Damage or burnout of the CRAFTSMAN Product motor resulting from failure to clear a blockage occurring during the

normal course of use.

• Loss or damage to the CRAFTSMAN Product resulting from conditions beyond Our control including without

limitation, misuse, accident, abuse, neglect, negligence (other than Our’s), overuse beyond intended capacity as set

forth in the Instruction Manual, or modifications or alterations made by anyone other than Us.

• Loss or damage to the CRAFTSMAN Product resulting from failure to use the CRAFTSMAN Product in accordance with

the written instructions, guidelines, and terms and conditions set forth in the Instruction Manual.

• TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL WE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR

CONSEQUENTIAL DAMAGES, INCLUDING ANY ECONOMIC LOSS, WHETHER RESULTING FROM NONPERFORMANCE,

USE, MISUSE OR INABILITY TO USE THE CRAFTSMAN PRODUCT OR FOR THE NEGLIGENCE OF ETC.

How to Obtain Service

US and Canada – To obtain warranty benefits contact us toll free at 1-888-331-4569 (Mexico 001-881-331-4569).

We will direct you to the nearest service center to review your vacuum for inspection, repairs or replacement.

Mexico - To obtain warranty benefits contact us toll free at 001-881-331-4569. We will direct you to the nearest service

center to review your vacuum for inspection, repairs or replacement.

No Other Express Warranty Applies

This limited warranty is the sole and exclusive warranty provided to You. No other express warranty, written or verbal,

applies including, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

No employee, agent, dealer, or other person is authorized to alter this limited warranty or make any other warranty on

behalf of Us.

What We will do to Correct Problems

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE LIMITED TO REPAIR, REPLACEMENT,

REFUND OF THE CRAFTSMAN PRODUCT.

After You have contacted CRAFTSMAN Product Customer Service Department, We will initiate warranty proceedings,

including a physical inspection, subject to the exclusions and the Warranty Period stated herein, to determine whether to

repair or replace the CRAFTSMAN Product or provide You with a refund.

The decision to repair or replace your CRAFTSMAN Product or to provide a refund is at Our sole discretion. Repair or

replacements provided to You by ETC are at no cost to You if covered under this limited warranty.

If we are unable to provide You with a suitable repaired or replacement CRAFTSMAN Product, we will provide you with

a refund equal to the purchase price of your CRAFTSMAN Product or a credit to be used toward the purchase of a new

CRAFTSMAN Product.

In the event of any dispute between CUSTOMER AND US, either party may choose to resolve the dispute by binding

arbitration. THIS MEANS IF EITHER CUSTOMER OR US CHOOSE BINDING ARBITRATION, NEITHER PARTY SHALL HAVE THE

RIGHT TO LITIGATE SUCH CLAIM IN COURT OR HAVE A JURY TRIAL. DISCOVERY AND APPEAL RIGHTS ARE LIMITED.

This limited warranty gives you specific legal rights, and you may also have other rights, which vary from State to State.

Some states do not allow the exclusion of incidental or consequential damages, so the above limitation may not apply.

18

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 18 2/22/19 10:31 AM

Part No. SP7075 Form No. SP7075-1 Printed in Mexico 02/2019

CRAFTSMAN®

is a registered trademark of Stanley Black & Decker, Inc., used under license.

es una marca registrada de Stanley Black & Decker, Inc., utilizada bajo licencia.

est une marque déposée de Stanley Black & Decker, Inc., utilisée sous licence.

2019 CRAFTSMAN

Product Manufactured by: EMERSON TOOL COMPANY

Producto fabricado por: 8100 W. Florissant • St. Louis, MO 63136

Produit fabriqué par : U.S. & Canada Only • É.-U. et Canada seulement • EE.UU. y Canadá solamente

c

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 19 2/22/19 10:31 AM

20

21

Définitions : Termes et symboles d’alertes de sécurité

Ce Guide d’utilisation utilise les termes et symboles d’alertes de sécurité suivants pour vous prévenir en cas de situations

dangereuses et de risque de blessures ou de dommages matériels.

Fig. A

1

2

3

4

5

6

7

8

9

10

11

12

Composants

1 Interrupteur de marche/arrêt

2 Poignée de transport/

Aire d’enroulement du cordon d’alimentation

3 Ensemble de bloc-moteur

4 Pinces pour le rangement du tuyau flexible

5 Orifice d’admission

6 Tambour à poussière

7 Pied à roulette avec aire de rangement

8 Roulette

9 Drain

10 Verrou du tambour

11 Cordon d’alimentation

12 Orifice de soufflerie

DANGER: Indique une situation dangereuse imminente qui, si elle n’est pas évitée, causera la mort ou

une blessure grave.

AVERTISSEMENT: Indique une situation pouvant être dangereuse qui, si elle n’est pas évitée,

risque de causer la mort ou une blessure grave.

MISE EN GARDE: Indique une situation dangereuse qui, si elle n’est pas évitée, pourrait causer

une blessure mineure ou modérée.

(Utilisé sans terme) Indique un message relatif à la sécurité.

AVIS : Indique une pratique non associée à un risque de blessure qui, si l’on n’en tient pas compte, pourrait causer des

dommages matériels.

En cas de questions ou de commentaires au sujet de ce

produit ou de tout autre produit, téléphonez à CRAFTSMAN

au numéro suivant (appel gratuit) :

1-888-331-4569.

AVERTISSEMENT : Lisez tous

les avertissements relatifs à la sécurité et toutes les instructions

associées. Le non-respect des avertissements et des instructions pourrait

causer un choc électrique, un incendie et/ou des blessures graves.

AVERTISSEMENT : Ne modifiez

jamais le produit ou toute partie de celui-ci. Ceci pourrait causer une

blessure ou des dommages matériels.

AVERTISSEMENT: Pour réduire

le risque de blessure, lisez le Guide d’utilisation.

SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 20 2/22/19 10:31 AM

La page charge ...

Sears Craftsman CMXEVBE175900 Manuel utilisateur

Sears Craftsman CMXEVBE175900 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents