Dustbane Hurricane 700 XTT Operations Manual

Marque: Dustbane

Modèle: Hurricane 700 XTT

Catégorie: Machine à plancher

Taper: Operations Manual

Ce manuel convient également à

Hurricane 850 XTT

Operations Manual

Manuel d’opérations

Hurricane 700 XTT / Hurricane 850 XTT

Auto-Scrubber / Auto-récureuse

19323 / 19324

Date of Issue / Date d’émission : 2020-04

Serial Number / Numéro de série : Date of Purchase / Date d’achat :

Distributor Name / Nom du distributeur :

3Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

GENERAL INFORMATION

Purpose of this manual

This manual has been written by the Manufacturer and is an integral part of the machine

It denes the purpose for which the machine has been designed and constructed and contains all the information required

by operators

In addition to this manual, which contains information for operators, other publications are available providing specic

information for maintenance personnel

The terms “right” and “left”, “clockwise” and “counter-clockwise” refer to the forward movement of the machine.

Constant compliance with the instructions provided in this manual guarantees the safety of the operator and the machine,

ensures low running costs and high quality results and extends the working life of the machine. Failure to follow these instructions

may lead to injury to the operator or damage to the machine, oor and environment.

To nd the topic that interests you more rapidly, consult the list of contents at the beginning of the manual.

Parts of the text requiring special attention are printed in bold and preceded by the symbols illustrated and described here.

! DANGER: Indicates the need for attention in order to avoid a series of consequences which could cause death or serious injury

to personnel.

! WARNING: Indicates the need for attention in order to avoid a series of consequences which could cause damage to the machine

or work environment or nancial loss.

! INFORMATION: Very important instructions. In line with the company’s policy of constant product development and updating,

the Manufacturer reserves the right to make modications without prior notice. Although your machine may dier appreciably from

the illustrations in this document, the correctness and validity of the instructions contained in this manual are guaranteed.

TECHNICAL INFORMATION

General description

This machine is a scrubber dryer for sweeping, washing and drying at, horizontal, smooth or moderately rough, uniformly

structured and obstacle-free oors in civil and industrial premises. The scrubber dryer spreads a solution of water and detergent in

the correct concentration on the oor and then scrubs it to remove the dirt. By carefully choosing the detergent and brushes from

the wide range of accessories available, the machine can be adapted to a wide range of combinations of types of oor and dirt.

The machine incorporates a wet vacuuming system which dries the oor immediately after washing. The drying action is

produced by the suction motor, which generates a partial vacuum in the dirty water tank. Squeegees mounted beneath the tank

are designed to collect the lm of dirty water with the machine moving in both forward and reverse directions.

4 Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Main Parts

The main parts of the machine are as follows:

• The detergent solution tank (g. 2, ref. 3): used to contain and carry the mixture of clean water and detergent;

• The recovery tank (g. 2, ref. 2): used to collect dirty water sucked up from the oor during washing;

• Control panel (g. 2, ref. 1);

• Head unit (g. 2, ref. 5): the main element is represented by the brushes/rollers, which distribute the detergent solution

on the oor, removing dirt;

• Drive unit (g. 2, ref. 7): the main element consists of the electronically controlled gear motor which is operated via a lever

below the machine handgrip and enables the machine to move forward and back;

• Squeegee unit (or oor wiper, g. 2, ref. 8): used to wipe and dry the oor, sucking up the water spread on the oor;

• Battery unit (g. 2, ref. 6): supplies energy for the machine feeding;

• Bonnet (g. 2, ref. 4);

5Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Hazard Areas

• Tank unit: in presence of certain detergents, danger of irritation for the eyes, skin, mucous diaphragms, respiratory

apparatus and asphyxia. Danger caused by dirt recovered from the environment (germs and chemical subtances). Danger

of crushing between the recovery tank and solution tank, when the recovery tank is replaced on the solution tank.

• Control panel: danger of shortcircuits.

• Lower part of washing head: danger due to lowering of head and rotation of brushes/rollers.

• Top of washing head: danger of crushing between the top of the brush head and the chassis.

• Rear wheels: danger of crushing between wheel, chassis and tank.

• Electrical components box: danger of short circuits.

• Battery compartment (located within the solution tank): danger of short circuits between the battery poles and presence

of hydrogen during battery charging.

Safety Devices

Devices (page 8, ref. 3) Activation Fonction

A Emergency button Made active when pressed.

Interrupts the power

supply.

B Safety in reverse

Safety device to prevent

crushing in reverse. Cuts in

when pressed

Interrupts reverse

movements of

machine

- Service brake

Comes on automatically

when the drive lever is

released.

The machine

gradually

decelerates.

C Parking and emergency brake

Press pedal C to engage.

Must be operated only with

the machine at a standstill

or in case of emergency: if

operated with the machine

moving, it can cause damage.

Prevents the

machine moving.

Optional units

Hour counter: the hour counter accessory is xed to the control panel (g. 4, ref. 1). It displays the number of brush operating hours.

Optional Accessories

• Bristle brushes: used for washing delicate oors and for polishing;

• Propylene brushes: used for normal oor washing;

• Tynex brushes: used to remove accumulated stubborn dirt on resistant oors;

• Pad Drivers: allow the use of a wide selection of dierent abrasive and polishing pads.

6 Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

SAFETY INFORMATION

Safety precautions

Read the “User Manual” carefully before start-up and use or before performing maintenance or any other work on the machine.

! WARNING: Rigorously follow all the instructions in this Manual (in particular those marked “Danger!” and “Warning!”). Also respect

the labels applied to the machine. The Manufacturer declines all liability for injury to persons or damage to property resulting from failure

to follow instructions.

• The auto-scrubber must be used exclusively by persons trained in its use and/or who have demonstrated their ability and

have been expressly instructed to use the auto scrubber.

• The machine must not be used by minors.

• The machine must not be used for purposes other than those for which it was expressly designed. Scrupulously respect

all safety standards and conditions applicable to the type of building in which the machine is to be operated (e.g.:

pharmaceutical companies, hospitals, chemicals, etc).

• Do not use the machine in places with inadequate lighting or explosive atmospheres, on public roads, in the presence of

dirt hazardous to health (dust, gas, etc) and in unsuitable environments.

• The machine is designed for temperatures of between +4°C and +35°C when in use and between +0°C and +50°C when

not in use.

• The machine is designed to work in a humidity of between 30% and 95%.

• Never use or pick up ammable liquids or explosives (e.g. petrol, fuel oil, etc), ammable gases, dry dusts, acids and

solvents (e.g. paint solvents, acetone etc) even if diluted.

• Never pick up aming or incandescent objects.

• Never use the machine on slopes or ramps of more than 2%. In the case of slight slopes, do not use the machine

transversally, always maneuver with care and do not reverse.

• When transporting the machine on steeper ramps or slopes, take the utmost care to avoid tipping up and/or

uncontrolled acceleration. Move the machine on ramps and/or steps only with the brush head and squeegee raised.

• Never park the machine on a slope.

• The machine must never be left unattended with the motor or engine on. Before leaving it, turn

the motor or engine o, make sure it cannot move accidentally.

• Always pay attention to other people, children in particular, present in the place where you are working.

• Never use the machine to transport people or things or to tow things. Do not tow the machine.

• Never rest objects of any weight on the machine for any reason.

• Never obstruct ventilation and heat dispersion slits.

• Never remove, modify or circumvent safety devices.

• Numerous unpleasant experiences have shown that a wide range of personal objects may cause serious accidents. Before

beginning work, remove jewelry, watches, ties, etc.

• The operator must always use personal protection devices - protective apron or overalls, non-slip waterproof shoes,

rubber gloves, protective goggles and ear protectors and mask to protect the respiratory tract.

• Keep hands away from moving parts.

• Never use detergents other than those specied. Follow the instructions on the MSDS if you come into contact.

• Make sure the power sockets used for the models with battery charger are connected to a suitable grounding system and

protected by dierential thermal solenoid switches.

• Make sure the electrical characteristics of the machine (voltage, frequency, absorbed power) given

on the rating plate (g. 1) are the same as those of the main electricity supply. The machine with cable has a three-wire

cable and a three pin grounded plug for use in an appropriate grounded socket. The ground wire is yellow and green.

Never connect this wire to anything other than

the ground contact of the socket.

• It is crucial to respect the battery manufacturer’s instructions and current legislation.

The batteries should always be kept clean and dry to avoid surface leakage current. Protect

7Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

the batteries from impurities such as metal dust.

• Never rest tools on the batteries as this could cause short circuit and explosion.

• When using battery acid, always follow the relative safety instructions scrupulously.

• In the presence of particularly strong magnetic elds, assess the possible eect on the control electronics.

• Never wash the machine with water jets.

• The uids collected contain detergent, disinfectant, water and organic and inorganic material.

They must be disposed o in accordance with local legislation.

• In the case of malfunction and/or faulty operation, turn the machine o immediately (disconnecting it from the main

power supply or batteries) and do not tamper. Contact a service center authorized by the Manufacturer.

• All maintenance operations must be performed in an adequately lit place and only after disconnecting the machine from

the power supply.

• All work on the electrical system and all maintenance and repair operations other than those explicitly described in this

manual must be performed by specialized personnel expert in the sector only.

• If the power cable, plug or terminals require replacing, make sure the electrical connections and cable grip inside the

control panel are tightly fastened to guarantee the resistance of the cable if pulled. Then replace the panel carefully to

guarantee the safety of the operator.

• Only original accessories and spare parts supplied by the Manufacturer may be used in order to guarantee safe problem-

free operation of the machine. Never use parts removed from other machines or from other kits.

• This machine has been designed and constructed to provide ten years’ service from the fabrication date shown on the

rating plate (g. 1). After this time, whether the machine has been used or not,

it should be disposed of according to current legislation in the country in which it is used:

• At the end of the machine’s life, please dispose according to local regulations.

The machine is designed and constructed to provide ten years’ service from the date of manufacture shown on the nameplate.

After this period, whether the machine has been used or not, it should be disposed of according to current legislation in the

country in which it is used.

It should be disconnected from the power supply, emptied of all liquids and cleaned prior to disposal.

The machine is classied as WEEE-type special waste and is covered by the requirements of applicable environmental protection

regulations (2002/96/EC WEEE).

The machine must be disposed of separately from ordinary waste in compliance with current legislation and standards.

Also make sure that all parts of the machine that could represent a hazard, particularly to children, are made safe.

Alternatively, return the machine to the Manufacturer for a complete overhaul.

MOVEMENT AND INSTALLATION

Lifting and transporting the packaged machine

! WARNING: During all lifting operations, make sure the packaged machine is rmly secured to avoid it tipping up or being accidentally

dropped. Always load/unload lorries in adequately illuminated areas.

The machine is packaged on a wooden pallet by the Manufacturer. It must be loaded onto the transporting vehicle using suitable

equipment (see EC Directive 2006/42 and subsequent amendments and/or additions). At destination, it must be unloaded using

similar means.

A fork lift truck must always be used to lift the packaged body of the machine. Handle with care to avoid knocking or overturning

the machine.

8 Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Delivery checks

When the carrier delivers the machine, make sure the packaging and machine are both whole and undamaged. If the machine

is damaged, make sure the carrier is aware of the damage and before accepting the goods, reserve the right (in writing) to request

compensation for the damage.

Unpacking:

! WARNING: When unpacking the machine, the operator must be provided with the necessary personal protection devices (gloves,

goggles, etc.) to limit the risk of accident.

Proceed as follows to unpack the machine:

• Cut and remove the plastic straps with scissors or nippers;

• Remove the cardbox;

• Depending on the model, remove the metal brackets or cut the plastic straps, which x the machine chassis to the pallet;

• Disengage the parking brake via the pedal (ref. C g. 3);

• Let the machine slide down the pallet on an inclined plane, by pushing it into reverse;

• Unwrap the brushes/rollers and the squeegee from their packing;

• Clean the outside of the machine observing the safety rules;

• After unpacking the machine, you can install the batteries (if not already installed): see respective paragraphs.

If necessary, preserve the wrapping material as it could be used again to protect the machine in the event of a move or if the machine

should be sent to a service centre for repair. Otherwise, the material must be disposed of in compliance with the laws in force.

9Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Batteries

Two dierent batteries can be tted on this machine:

• Flooded Lead-Acid Batteries: these batteries require the periodical check of the electrolyte level. When it is necessary, top up

with distilled water alone until the plates are covered; do not overll (max. 5 mm. above the plates).

• AGM Batteries: these kind of batteries require no maintenance.

When using this type of battery the fuse FU7 (g. 6, ref. 2) inside the machine control panel must be removed using the pliers. This

operation serves to inform the electronic control of the type of battery used.

Do not t the fuse FU7 if using gel/AGM batteries. The technical specications must correspond to those indicated in the paragraph con-

cerning the machine technical data: actually, the use of heavier storage batteries can cause serious problems to the machine controllabil-

ity and overheat the drive motor, whereas storage batteries with a lower capacity require recharges more frequently. They must be kept

charged, dry and clean, with their connections tight.

Batteries: preparation

! DANGER: During battery installation and any type of battery maintenance, the operator must be provided with the necessary personal

protection devices (gloves, goggles overalls, etc.) to limit the risk of injury. Keep clear of naked ames, avoid short circuiting the battery

poles, avoid sparks and do not smoke.

The Flooded Lead Acid Batteries batteries are normally supplied lled with acid and ready-for-use. If batteries without acid are to

be used, before mounting them on the machine, it is necessary to make them active as follows:

• After taking o the battery plugs, ll up all elements with a solution of specic sulphuric acid, until the cells are

thoroughly covered (ll each element at least twice);

• Let them rest for about 4-5 hours, to give time to air bubbles to come up to the surface and the plates to absorb the

electrolyte;

• Check that the electrolyte level is still above the plates, otherwise top up with the solution of sulphuric acid;

• Reclose the plugs;

• Install the storage batteries on the machine (following the procedure described below). It is now necessary to perform a

rst recharging before having the machine start; to do so stick to the instructions written in the respective paragraph.

10 Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Batteries: installation and connection

! DANGER: Remove the electronic key from the instrument panel before installing and connecting the batteries. Make sure you connect

the terminals marked with a “+” to the positive poles of the battery. Do not check the battery charge by sparking.

Meticulously follow the instructions given below as short circuiting the batteries could cause them to explode.

• Stop the machine and press the emergency button (g. 8, ref. 2); engage the parking brake by means of the pedal (g. 8,

ref. 12);

• Make sure that the two tanks are empty (empty them, if necessary: see respective paragraph);

• Unhook the recovery tank (g. 2, ref. 2) from the solution tank (g. 2, ref. 3) acting on the blocking hook (g. 7, ref. 1),

placed on front of the machine;

• Lift the recovery tank, by making it turn backwards around about 90°: in this way you have access to the battery

compartment (embedded in the solution tank) from the upper side;

• Insert the batteries in the compartment, orienting them as shown in the drawing printed on the solution tank in the

compartment.Install the storage batteries on the machine using suitable means according to their weight. Positive and

negative poles have dierent diameters.

• Referring to the arrangement of cables in the aforesaid drawing, connect the clips of the battery wiring and the bridge to

the poles of the storage batteries. After orienting the cables as shown in the drawing, tighten the clips at the poles and

cover them with vaseline;

• Insert back the tank unit in its work position and hook it to the solution tank by means of the xing hook (g. 7, ref. 1);

• Use the machine in compliance with the instructions written below.

Batteries: removal

Make sure the switches on the control panel are in the “0” position (o) and the machine is turned o. Keep away from naked

ames, do not short circuit the battery poles, do not cause sparks and do not smoke. Proceed as follows:

• Disconnect the battery wiring and bridge terminals from the battery poles.

• If necessary, remove the devices xing the battery to the base of the machine.

• Lift the batteries from the compartment using suitable lifting equipment.

11Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Choosing a battery charger

Make sure the battery charger is compatible with the batteries to be charged.

Lifting and transporting the machine

! WARNING: All phases of lifting and moving must be performed in an adequately illuminated environment with the adoption of the

safety measures most appropriate to the situation.The operator must always use personal protection devices.

The loading of the machine onto a vehicle must be done as follows:

• Empty the recovery tank and the solution tank;

• Remove the squeegee and the brushes (or drive discs);

• Remove the batteries;

• Place the machine on the pallet, engage the parking brake and secure it with plastic straps or metal brackets;

• Lift the pallet by means of a fork lift truck and load it on the vehicle;

• Anchor the machine to the vehicle with ropes connected to the pallet and to the chassis of the machine;

PRACTICAL GUIDE FOR THE OPERATOR

! WARNING: Before starting work, wear overalls, ear protectors, non-slip and waterproof shoes, mask to protect the respiratory tract,

gloves and all other personal protection devices necessitated by the work environment.

! WARNING: Never leave the machine unattended or parked with the electronic ignition key inserted.

! INFORMATION: If you are using the machine for the rst time, we recommend trying it out on a large obstacle-free surface rst

to acquire the necessary familiarity.

! WARNING: To avoid damaging the surface of the oor you are cleaning, avoid rotating the brushes with the machine stationary.

! WARNING: Always dilute the detergent according to the manufacturer’s instructions. Do not use sodium hypochlorite (bleach)

or other oxidants, particularly in strong concentrations. Do not use solvents or hydrocarbons. The water and detergent temperature

must not exceed the maximum indicated in the “Technical specications”. They must be free of sand and/or other impurities.

The machine has been designed for use with low-foam biodegradable detergents made specically for scrubber dryers.

For a complete and up-to-date list of the detergents and chemicals available, contact the Manufacturer.

Use products suitable for the oor and dirt to be removed only. Follow the safety regulations on use of detergents given in the section

“Safety regulations”.

12 Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Control Devices - Description

With reference to g. 8 the machine has the following controls and LEDs:

• Battery charge level indicator (ref. 9): signals both “Power on” and the battery charge level. Note: the following

percentages are based on the usable capacity and not the total capacity of the batteries (therefore 100% at = 80% of

total battery capacity). Possible situations are:

• O: the main switch is set to “0” (o) or the batteries are disconnected;

• Green light: batteries charged from 100% to 50%;

• Yellow light: batteries charged from 50% to 15%;

• Red light (also simultaneously with yellow or green light): batteries at and must be recharged.

• Main switch - emergency button with key (ref. 2): enables or disables the power supply to all the machine functions. It

acts as a safety device. To start the machine turn the proper key clockwise. To stop the machine press the button.

• Brush/roller up-down button (ref. 5): when the arrow down is pressed, the head moves down to the working position,

the brush motor comes on automatically and the solenoid valve is activated. Via this button, a variable pressure can

be exerted on the head during the work phase (according to how long the button is kept pressed), thus adapting the

cleaning power of the brushes to a wide range of dierent operating conditions. When the arrow up is pressed, the head

moves up to the rest position, the brush motors are switched o and the solenoid valve is de-activated.

• Brush pressure indicator (ref. 8): indicates connections of brushes and pressure exerted by the head (1 led on indicates

beginning of brush connection; 2 leds on indicate minimum pressure; 3 leds on indicate maximum pressure).

• Brush release button (ref. 4): permits release of the brushes; press the button for a couple of seconds: when the button is

released, the brushes will be released.

• Cock control lever (ref. 3): allows to adjust continuously the ow of solution sent to the brushes. On turning it forward, the

liquid outlet ow is increased.

• Drive command lever (ref. 6): placed under the handgrip, when it is slightly pressed upwards (the emergency button must

be active), it starts the drive motor thus making the machine move forward. When the lever is pressed down, the drive

motor moves the machine in reverse gear.

• Squeegee lifting lever (ref. 11): it allows to raise (when lifted) or lower (when pushed down) the squeegee. When it is

pressed down, the suction motor is also switched on for drying the oor.

• Hour meter (ref. 7 - optional): displays the hours of work of the brush.

• Parking brake pedal (ref. 12): engages (when pressed and moved to the right) and disengages (when pressed and moved

to the left) the parking brake.

• Potentiometer (ref. 1): permits adjustment of the machine forward and reverse speed; when the knob is turned clockwise

the speed is increased.

Installing And Adjusting The Squeegee

The oor wiper, also called squeegee (g. 2, ref. 8), is the rst responsible for drying. To

install the squeegee on the machine proceed as follows:

• Stop the machine and press the emergency button (g. 8, ref. 2); engage the

parking brake by means of the pedal (g. 9, ref. 5);

• Check that the squeegee supporting plate (g. 9, ref. 2) is raised, otherwise lift it

by acting on the proper lever (g. 9, ref. 6);

• Firmly push down the sleeve of the suction tube (g. 9, ref. 4) into the squeegee;

• Slacken the two knobs (g. 9, ref. 3) placed in the centre of the squeegee;

• Insert the two threaded dowels in the slots of the support (g. 9, ref. 2);

• Fix the squeegee by tightening the knobs (g. 9, ref. 3).

13Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

The blades of the squeegee are used to scrub from the oor the lm of water and detergent thus allowing a perfect drying. As

long as time goes by the continuous scraping rounds o and splits the sharp edge in contact with the oor, thus reducing the

drying ecacy and therefore requiring the replacement of the blades. Therefore, often check their state of wear and tear.

To obtain a perfect drying action it is necessary to adjust the squeegee in such a way that when it is in operation, the rear blade

lip is bent about 45 degrees with respect to the oor at all points. It is possible to adjust the inclination of the blades by screwing

down the nuts (g. 9, ref. 1): by unscrewing the nuts the blade inclination is reduced, while by screwing the nuts the blade

inclination is increased. Moreover, check that the suction hole of the squeegee is not clogged, to let dirty water to be perfectly

drained from the oor.

Moving The Machine

To displace the machine, do as follows:

• Lift the squeegee;

• Raise the head by pressing the brush up-down button (g. 8, ref. 5) on the arrow up;

• Disengage the parking brake via the pedal (g. 8, ref. 12);

• Insert the key to release the emergency button (g. 8, ref. 2);

• Below the handgrip is a lever (g. 8, ref. 6): by pulling the lever up (g. 10, ref. 2) or pressing it down (g. 10, ref. 1),

according to whether you wish to move forward or back, the drive motor is switched on and the machine will begin to

move;

• Adjust the running speed via the potentiometer (g. 8, ref. 1);

• Once you have reached your destination, engage the parking brake via the pedal (g. 8, ref. 12).

Never leave the machine unmanned or parked with the parking brake disengaged or the key inserted in the emergency button. Do not

engage the parking brake when the machine is moving.

Installing And Replacing The Brushes/Pad Drivers

Do not work if the brushes or drive discs are not perfectly installed.

Brush Head

Removing:

• Raise the head by pressing the brush up-down button (g. 8, ref. 5) on the arrow up;

• Press the brush release button (g. 8, ref. 4) for a couple of seconds: when the button is released, the brushes will be

released.

Installing:

• Position the brushes side by side at the front of the machine;

• Move forward with the machine until the head is positioned above the brushes and they are centred;

• Press the brush up-down button (g. 8, ref. 5) on the arrow down and keep it pressed until the second led of the brush

pressure indicator comes on (g. 8, ref.

8); in this phase the brush motor may

come on and then switch o for a few

moments: this is a normal part of the brush

engagement procedure.

In particular conditions, the brushes may not engage

correctly. In this case the head will vibrate. The brushes

must be disassembled and retted.

14 Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Flap adjustment

• Loosen the screws (g. 13, ref. 1);

• Position the ap blade (g. 13, ref. 2) so that it adheres perfectly to the oor;

• Retighten the screws.

Detergents – Instructions

! INFORMATION: Always dilute the detergent according to the manufacturer’s instructions. Do not use bleach or other oxidants, particu-

larly in strong concentrations. Do not use solvents or hydrocarbons. The temperature of the water and detergent must not exceed the

maximum indicated in the technical specication. They must be free of sand and/or other impurities.

The machine has been designed for use with low-foam biodegradable detergents made specically

for automatic scrubbers. For a complete and up-to-date list of the detergents and chemicals available, contact the manufacturer.

Use products suitable for the oor and dirt to be removed only. Follow the safety regulations

on use of detergents given in the section “Safety regulations”.

Setting Up The Machine

Before starting to work wear an apron, cap, non-slip waterproof shoes, a mask to protect the respiratory system, gloves and any other

form of protection indicated by the supplier of the detergent or necessary in the environment you are going to work in.

Before starting to work, perform the following operations:

• Check the level of battery charge (recharge, if necessary);

• Disengage the parking brake via the pedal (g. 8, ref. 12);

• Make sure that the recovery tank (g. 2, ref. 2) is empty; if this is not so, empty it;

• Check that the water control lever (g. 8, ref. 3) is at the position “o”;

• Fill the solution tank (g. 2, ref. 3) through the respective hole on the front with clean water and non-foaming detergent

in a suitable concentration: leave a dierence in level of at least 5 cm between the liquid surface and the tank opening;

• Install brushes or pad drivers suitable for the oor and the job to be done;

• Lower the head by pressing the brush up-down button (g. 8, ref. 5) on the arrow down;

• Check that the squeegee (g. 2, ref. 8) is xed well and connected to the suction tube (g. 9, ref. 4); make sure that the rear

blade is not worn.

15Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

If you use the machine for the rst time, it is advisable that you train with it for a short time on a wide surface without any obstacles, to

acquire the necessary familiarity. Always empty the recovery tank before relling the solution tank.

For an eective cleaning and long life of the equipment, it is necessary to follow some simple rules:

• Prepare the work area, keeping away the possible obstacles;

• Begin to work starting from the farthest spot, in order to avoid trampling on the area just-cleaned;

• Choose paths that are as much straight as possible;

• On wide oors divide the paths into rectangular and parallel areas.

At the end quickly mop the area, if necessary, to clean spots that are inaccessible to the scrubber.

Work

After setting up the machine, proceed as follows:

• Insert and operate the key to release the main switch (g. 8, ref. 2) and enable all the machine functions: the battery

charge level indicator will come on (g. 8, ref. 9);

• Move the lever (g. 8, ref. 3) to the position of minimum ow of solution: the detergent solution begins to reach the

brushes;

• Press the brush/roller up-down button (g. 8, ref. 5) on the arrow down: the head will begin to move down and as soon

as the brushes touch the oor the brush motors will come on. As the brushes rotate, the solution is distributed over the

oor;

• Lower the squeegee by means of the proper lever (g. 8, ref. 11): the suction motor comes on;

• Press the drive lever (g. 8, ref. 6) placed under the handgrip: the drive motor is started and the machine starts moving

forward;

• Adjust the running speed via the potentiometer (g. 8, ref. 1);

• If you wish to engage reverse gear during work with the squeegee lowered, you must rst stop and raise the squeegee;

• Check periodically that the detergent solution reaches the brushes/rollers and ll with solution if it runs out;

• Check cleaning quality during work and adjust, as required, the ow of solution sent to the brushes/rollers (by rotating

the cursor (g. 8, ref. 3)) and the pressure exerted by the head-brushes on the oor (via the brush up-down button (g. 8,

ref. 5) until the test pressure indicator (g. 8, ref. 8) indicates the required level).

In working conditions, if the emergency switch is accidentally pressed and the machine is switched o, when it is switched on again the

brush button must be pressed to re-activate the brushes. Never leave the machine stationary with the head lowered and the brushes in

motion: the oor could be damaged. Whenever you ll up the solution tank, always empty the recovery tank. Do not leave the machine

stationary with the suction motor on and the solution cock turned on.

• If the warning led (g. 8, ref. 9) starts ashing, it means that the storage batteries are getting at. Therefore, it is necessary

to recharge them; if you keep on working, the batteries could become damaged irreparably;

• If the suction unit revs up but does not perform suction, it means that the oater has cut in. In this case the recovery tank

must be emptied (see specic paragraph).

If for any reason the battery voltage drops considerably below the level envisaged, even temporarily, the drive lock may cut in. In this case

the machine must be switched o and then on again.

16 Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Finishing work

• Move the lever (g. 8, ref. 3) to the position “CLOSED”;

• Release the drive lever (g. 8, ref. 6) placed beneath the handle: the drive motor switches o and the machine stops;

• Raise the head by pressing the brush up-down button (g. 8, ref. 5) on the arrow up to stop the brushes (or drive discs or

rollers) and raise them to prevent them becoming permanently distorted;

• Let the suction motor run for at least 2 minutes to make sure that it is completely dry;

• By raising the lever (g. 8, ref. 11), lift the squeegee from the ground to prevent continuous pressure causing distortion of

the drying blades and to switch o the suction motor;

• Press the main switch (g. 8, ref. 2) to disable all the machine functions;

• Engage the parking brake via the pedal (g. 8, ref. 12);

• Empty and clean the recovery tank.

ADDITIONAL FUNCTIONS

The machine is provided with additional functions that can be activated by removing some fuses inside the control panel (g. 14).

FU6 Fuse Function

When fuse FU6 is removed, the electronic control of the head is enabled, in particular the following functions:

• Brush timer: if the drive is released, the brushes will stop after a few seconds; to reactivate the brushes, simply pull the

drive lever.

• Battery protection: when the batteries are at, rst the red led comes on, then the brushes lock; in this case a continuous

buzzer reminds the user that the head must be raised to prevent damage to the brushes, since the drive continues to

operate. The brush motors are re-enabled by reset of the key (g. 8, ref. 2) if the batteries have sucient load and voltage.

FU7 Fuse Function

Gel battery activation (the discharge voltages are varied for operation with the gel batteries).

FU8 Fuse Function

Water is delivered to the brushes only when the drive is activated.

Some useful tips to get the most from your scrubber dryer

In the event of particularly stubborn dirt on the oor, washing and drying can be performed in two separate operations.

17Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Pre-Washing

• Turn on the water;

• Switch on the brush motor and lower the head;

• Adjust the head pressure, which depends on the type of oor and dirt to be removed;

• Start washing with the suction motor o and the squeegee lifted;

The ow of water must be dosed in proportion to the desired advance speed: the slower the machine goes, less water comes

down. Insist on washing the dirtiest spots: in this way the detergent has the time to perform its chemical action for the

detachment and suspension of dirt, and the brushes to develop an eective mechanical action.

Drying

Lower the squeegee and with the suction unit operating pass again on the same area you have previously washed. In this way you

obtain a result that is similar to a thorough washing and the following operations of ordinary maintenance will certainly take less

time. To wash and dry at the same time, operate the brushes, water, squeegee and suction motor simultaneously.

Never leave the machine unmanned with the suction unit running.

Draining O Dirty Water

Use the individual protection devices suitable for the operation to be performed. Perform the draining operations with the machine

disconnected from the power supply.

The drain hose of the recovery tank is located at the rear left side of the machine. To empty the above-mentioned tank:

• Take the machine next to a drain;

• Stop the machine and press the emergency button (g. 8, ref. 2); engage the parking brake by means of the pedal

(g. 8, ref. 12);

• Take o the tank cap (g. 15, ref. 1) from the recovery tank (g. 15, ref. 5);

• Detach the drain hose (g. 15, ref. 2) from its seat, holding it in correspondence with the xing spring (g. 15, ref. 3) and

pull it horizontally;

• Keeping the hose end as much high as possible, take o the drain (g. 15, ref. 4) from the hose by unscrewing it;

• Lower the hose end gradually, checking the intensity of the jet of water with reference to its height from the ground;

• Check the amount of residual dirt in the recovery tank and wash it inside, if necessary. To facilitate the cleaning and total

drain, it is better to unhook it from the solution tank and lift it;

• When the dirty water has been totally drained, lower the recovery tank (if it

has been previously lifted) and hook it again to the solution tank;

• Put back the cap (g. 15, ref. 1) on the recovery tank, making sure that it is

perfectly closed;

• Close the drain hose (g. 15, ref. 2) with the cock (g. 15, ref. 4)

screw-tightening it; check that it is perfectly closed and ret the hose in its

housing.

While washing the recovery tank never remove the suction lter (g. 18, ref. 2) from its seat

and never direct the jet of water towards the lter itself. Now it is possible to proceed with a

new washing and drying action.

18 Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Draining O Clean Water

Use the individual protection devices suitable for the operation to be performed.

Perform the draining o operations with the machine disconnected from the power

supply.

To empty the tank:

• Take the machine next to a drain;

• Stop the machine and press the emergency button (g. 8, ref. 2);

engage the parking brake by means of the pedal (g. 8, ref. 12);

• Detach the drain hose (g. 16, ref. 1) from its seat, holding it in

correspondence with the xing spring (g. 16, ref. 2) and pull it

horizontally;

• Keeping the hose end as much high as possible, take o the drain cap

(g. 16, ref. 3) from the hose by unscrewing it;

• Lower the hose end gradually, checking the intensity of the jet of water

with reference to its height from the ground;

• When the contents have been totally drained from the solution tank,

close the drain cap (g. 16, ref. 3) screw-tightening it; check that it is

perfectly closed and ret the hose in its housing;

The water and detergent solution can also be used to wash the recovery tank.

Periods Of Inactivity

If the machine is to remain unused for a long time, the squeegee and brushes (or drive

discs or rollers) must be dismounted, washed and kept in a dry place (preferably packed

in a plastic envelope or sheet), sheltered from dust. Park the machine with the parking

brake engaged.

Furthermore, make sure that the tanks are completely empty and perfectly clean.

Recharge the batteries completely before putting them in the storehouse. During long

periods of inactivity recharge the batteries (once every two months at least) to preserve

the storage batteries constantly at the maximum charge.

Maintenance And Battery Recharging

Do not check the battery charge by producing sparks. The batteries give o inammable

vapours: put out any re or embers before checking and lling up the batteries. Perform the operations described below in airy

environments.

To avoid permanent damages to the batteries, never let them get at completely. Remember that when the proper red led (g. 8,

ref. 9) ashes on the control panel, it is necessary to recharge the batteries.

Recharging Procedures

Lead Batteries With Liquid Electrolyte

It is necessary to check the level of the electrolytic solution in order that it always covers the lms of the elements, adding the

necessary distilled water.

During recharging do not let the temperature of the electrolyte exceed 45°C.

19Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

To recharge proceed as follows:

• Stop the machine and press the emergency button (g. 8, ref. 2);

• Engage the parking brake by means of the pedal (g. 8, ref. 12);

• Connect the battery-charger to the battery wiring connector (g 17, ref. 1);

• Recharge according to the instructions written in the manual to the battery-charger;

• Switch o the battery charger before disconnecting the connectors;

• Disconnect the battery charger connector from the battery wiring connector;

• If using Flooded Lead Acid batteries, at the end of the recharging time check the battery intensity with a densimeter: if

one or more elements are at and the remaining ones completely charged, the battery is damaged and must be replaced.

MAINTENANCE INSTRUCTIONS

! DANGER: Never perform any maintenance operations without rst disconnecting the batteries. Maintenance on the electrical circuit and

all other operations not explicitly described in this manual must be performed by specialized personnel only, in compliance with current

safety legislation and as described in the maintenance manual.

! DANGER: Before lifting/rotating the tank to access the compartment, its contents must rst be emptied, then insert the safety bracket in

position to prevent the tank from accidentally closing again, see chapter “SAFETY INFORMATION”.

Maintenance - General rules

Performing regular maintenance according to the Manufacturer’s instructions improves performance and extends the working life

of the machine.

When cleaning the machine, observe the following precautions:

• Avoid using pressure washers. Water could penetrate the electrical compartment or motors leading to damage or short

circuits.

• Do not use steam to avoid the heat warping plastic parts.

• Do not use solvents or hydrocarbon based products. These can damage the cowling and rubber components.

Suction Air Filter And Floating Rod: Cleaning

• Stop the machine and press the emergency button (g. 8, ref. 2); engage the parking brake by means of the pedal

(g. 8, ref. 12);

• Open the recover tank lid (g. 18, ref. 1);

• Make sure that the recovery tank (g. 18, ref. 4) is empty;

• Take out the air lter (g. 18, ref. 2) of the suction unit from the oat support (g. 18, ref. 3), which is located on the upper

inner side of the recovery tank;

• Clean the lter with current water or with the detergent used in the machine;

• Put the lter back in the support only after having it dried well;

• Make sure that the lter has been replaced in its seat correctly;

• Check that the oating rod (g. 18, ref. 5), which is also xed to the support

(g. 18, ref. 3), moves freely and clean it;

• Close the recovery tank lid.;

20 Operations Manual Hurricane 700 XTT / Hurricane 850 XTT

Squeegee Blades: Check And Replacement

The blades of the squeegee are used to scrub from the oor the lm of water and detergent thus allowing a perfect drying. As

long as time goes by the continuous scraping rounds o and splits the sharp edge in contact with the oor, thus reducing the

drying ecacy and therefore requiring the replacement of the blades. Therefore, often check their state of wear and tear.

Exchanging or replacing the blades:

• Stop the machine and press the emergency button (g. 8, ref. 2); engage the parking brake by means of the pedal

(g. 8, ref. 12);

• Lower the squeegee by using the proper lever (g. 8, ref. 11);

• Take o the squeegee (g. 2, ref. 8) from its supporting plate (g. 9, ref. 2) by unscrewing completely the two knobs

(g. 9, ref. 3);

• Slide out the sleeve of the suction tube (g. 9, ref. 4) from the squeegee;

Front blade:

• Unscrew the knobs (g. 19, ref. 1);

• Remove the blade clamps (g. 19, ref. 3);

• Take out the blade (g. 19, ref. 4);

• Fit in the same blade inverting the edge in contact with the oor until all the four edges are worn, or else t in a new

blade;

• Put the blade clamp (g. 19, ref. 3) back;

• Screw down all the knobs (g. 19, ref. 1);

Rear blade:

• Unhook the hook clamp (g. 19, rif. 8);

• Slide out the two blade clamps (g. 19, ref. 7) by rst pushing them outwards with respect to the squeegee unit

(g. 19, ref. 5) and then taking them out;

• Remove the blade (g. 19, ref. 6);

• Fit in the same blade inverting the edge in contact with the oor until all the four edges are worn, or else t in a new

blade embedding it in the screws of the squeegee unit (g. 19, ref. 5);

• Put the two blade clamps (g. 19, ref. 7) back, centering the largest part of the slots on the xing screws of the squeegee

unit (g. 19, ref. 5) and then pushing the blade clamps towards the inside of the squeegee itself;

• Hook the clamp (g. 19, ref. 8) again. Insert the squeegee back on its support following the instructions reported in §6.2;

La page est en cours de chargement...

Dustbane Hurricane 700 XTT Operations Manual

Marque: Dustbane

Modèle: Hurricane 700 XTT

Catégorie: Machine à plancher

Taper: Operations Manual

Ce manuel convient également à

Hurricane 850 XTT

Télécharger le PDF

rapport

dans d''autres langues

English: Dustbane Hurricane 700 XTT

Dustbane Hurricane 700 XTT Operations Manual

Ce manuel convient également à

Dustbane Hurricane 700 XTT Operations Manual

dans d''autres langues

Documents connexes

Autres documents