Plantronics, Inc. 1
Poly Studio X Family
This document covers the following Poly Studio X models:
● Poly Studio X30 (models P018 & P018NR)
● Poly Studio X50 (models P017 & P017NR)
● Poly Studio X52 (models P033 & P033NR)
● Poly Studio X70 (models P026 & P026NR)
Service Agreements
Please contact your Poly Authorized Reseller for information about service agreements applicable to your
product.
Safety, Compliance, and Disposal Information
● This equipment is intended for indoor use only.
● This equipment is not intended to be directly connected to outdoor cables.
● Always disconnect the system from power and telecommunications networks before cleaning or
servicing.
● In order to remove all power from this unit, disconnect the power supply mains cord.
● Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a static-
free cloth.
● Do not immerse the system in any liquids or place any liquids on it.
● Do not disassemble this system. To maintain the warranty on the system, a qualified technician
must perform service or repair work.
● There are no user serviceable parts inside this product.
● Users must not service any parts in compartments that require a tool to access.
● This equipment should be used only on even surfaces.
● This product is intended to be powered by an external (LPS) power supply - use only the type
which is supplied with this product.
● Do not use a power cord that is damaged. This could cause fire or electric shock. Contact the
manufacturer for a replacement cord, if necessary.
● Only use a power cord which is appropriately rated and approved relevant to the country of use.
● This system is considered to be a Pluggable Equipment Type A. The socket outlets must be
installed near the equipment and be easily accessible.
● This equipment is not intended to be operated by children.
● When connecting to the mains supply, connect only to an earthed supply outlet.
● Keep ventilation openings free from any obstructions.
August 2023 | 3725-86562-005A
SAFETY AND REGULATORY NOTICES
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
2
● The ambient operating temperature rating of this equipment is 0 - 40ºC and should not be
exceeded.
Installation Instructions
Installation must be performed in accordance with all relevant national wiring rules.
L’Installation doit être exécutée conformément à tous les règlements nationaux applicable au filage
électrique.
Plug Acts as Disconnect Device
The socket outlet to which this apparatus is connected must be installed near the equipment and must
always be readily accessible.
USA
Part 15 FCC Rules
This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
● This device may not cause harmful interference.
● This device must accept any interferences received, including interference that may cause
undesired operation.
In accordance with part 15 of the FCC rules, the user is cautioned that any changes or modifications not
expressly approved by Polycom Inc. could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Modifications
In accordance with Part 15 of the FCC Rules, the user is cautioned that any changes or modifications not
expressly approved by Polycom, Inc. could void the user’s authority to operate the equipment.
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
3
Radiation Exposure Statement
The antenna used for this transmitter must be installed to provide a separation distance of at least 20
centimeters from all persons and must not be co located or operating in conjunction with any other
antenna or transmitter. This device with its antenna complies with FCC’s RF radiation exposure limits set
forth for an uncontrolled environment. To maintain compliance, this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Canada
Industry Canada Statement
This device complies with RSS247 of the Industry Canada rules and also with ISED’s license-exempt
RSS regulations. Operation is subject to the two following conditions:
(1) This device does not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
This device for operation in band 5150-5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems.
Cet appareil destiné à fonctionner dans la bande 5150-5250 MHz est uniquement destiné à une utilisation
en intérieur afin de réduire le potentiel d'interférences nuisibles aux systèmes satellites mobiles
cocanaux.
This Class [A] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada. Certification
Number IC: 1849C-P017, 1849C-P018, and 1849C-P026
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with greater than 20cm between the radiator and your
body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 20 cm entre le radiateur
et votre corps.
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
4
FCC and Industry Canada Example Label
See an example of the Poly Studio X52 (P033) regulatory label below.
FCC ID: M72-P033
IC: 1849C-P033
See an example of the Poly Studio X30 (P018) regulatory label below.
FCC ID: M72-P018
IC: 1849C-P018
See an example of the Poly Studio X50 (P017) regulatory label below.
FCC ID: M72-P017
IC: 1849C-P017
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
5
See an example of the Poly Studio X70 (P026) regulatory label below.
FCC ID: M73-P026
IC: 1849C-P026
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
6
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
7
EEA
CE Mark
P017, P018, P026, and P033 are all marked with the CE mark. This mark indicates compliance with EU
Radio Equipment Directive (RED) 2014/53/EU, RoHS Directive 2011/65/EU, and Commission Regulation
278/2009.
P017NR, P018NR, P026NR and P033NR are all marked with the CE mark. This indicates compliance
with the EU EMC Directive (EMCD) 2014/30/EU, Low Voltage Directive (LVD) 2014/35/EU, RoHS
Directive 2011/65/EU and Commission Regulation 278/2009.
A full copy of the Declaration of Conformity for each model can be obtained at www.poly.com/conformity
Poly Studio X Family Radio Operating Frequency
The frequency ranges in the following table apply to Poly Studio X30 (P017), Poly Studio X50 (P018),
Poly Studio X70 (P026).and Poly Studio X52 (P033).
Radio Operating Frequency
Maximum Transmit Power
Frequency Range
P017
P018
P026
P033
2422 - 2480 MHz Max EIRP [19.1]
dBm
Max EIRP [18.88]
dBm
Max EIRP [18.17]
dBm
Max EIRP [19.09]
dBm
5150 – 5350 MHz Max EIRP [19.93]
dBm
Max EIRP [20.06]
dBm
Max EIRP [20.31]
dBm
Max EIRP [19.85]
dBm
5470 - 5725 MHz Max EIRP [19.33]
dBm
Max EIRP [19.7]
dBm
Max EIRP [20.58]
dBm
Max EIRP [20.39]
dBm
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
8
Japan
Models P017, P018, P026 and P033 devices are only approved to transmit indoors within the W52 and
W53 bands for Japan:
● W52(5180MHz / 5200MHz / 5220MHz / 5240MHz)
● W53(5260MHz / 5280MHz / 5300MHz / 5320MHz)
VCCI A Statement
This product can’t be connected directly to the telecommunications circuits (or public wireless LANs) of
any telecommunications carriers (e.g., mobile communications carriers, fixed communication carriers, or
internet providers). To connect this product to the Internet, be sure to connect it via a router.
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
9
Taiwan
Taiwan RoHS table
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
10
Taiwan Class A Statement
Safety Statements
NCC Statements
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
11
South Korea
Korean Class A Statement
China
CCC Class A Statement
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
12
China RoHS table
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
13
Singapore
P017, P018, P026 and P033 all comply with the relevant IDA radio standards (IDA101619).
Mexico
IFETEL RF Statement
“La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
Brazil
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar
interferência em sistemas devidamente autorizados.
Operating Ambient Temperatures
● Operating temperature: +32 to 104°F (0 to 40°C)
● Relative humidity: 5% to 95%, noncondensing
● Storage temperature: -40 to +160°F (-40 to +70°C)
Waste Electrical and Electronic Equipment (WEEE)
All Polycom products that fall within the scope of the EU WEEE Directive carry the crossed wheelie
bin symbol which advises customers not to recycle electronic products in the domestic waste
stream but to recycle them safely as e-waste.
Restriction of Hazardous Substances Directive (RoHS)
All Poly products comply with the requirements of the EU RoHS Directive. Statements of compliance can
be obtained by contacting typeapprov[email protected]om.
Environmental
For the latest environmental information including Networked Standby Efficiency, Battery use and
disposal, take back RoHS and Reach, please visit https://www.poly.com/us/en/company/corporate-
responsibility/environment.
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
14
End of Life Products
Poly encourages you to recycle your end-of-life Poly products in an environmentally considerate way. We
recognize our Extended Producer Responsibility (EPR), in accordance with the requirements of the
European Waste Electronic and Electrical Equipment (WEEE) Directive 2012/19/EU.
All Poly products are marked with the crossed wheelie bin symbol shown below. Products that carry this
symbol should be not be disposed of in the household or general waste stream. Further recycling
information and detail of the options open to you, including our voluntary free global recycling service to
ISO 14001 standard can be found at: https://www.poly.com/WEEE.
The Poly Global Producer Responsibility Statement can be found in the Environment section of the
Poly.com website.
Poly Take Back
In addition to any mandated take back requirement, Poly offers free recycling of its branded products to
business users. Detailed information is available at www.poly.com/us/en/company/corporate-
responsibility/environment.
Safety and Regulatory Notices | | Poly Studio X52 (P033), Poly Studio X50 (P017), Poly Studio X30 (P018), & Poly Studio X70
(P026)
15
Getting Help and Copyright Information
GETTING HELP
For more information about installing, configuring, and administering Poly products or services, go to the Poly
Online Support Center.
© 2023 Poly. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of
their respective owners.
Poly
345 Encinal Street
Santa Cruz, California
95060
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
dans d''autres langues
- English: Poly Studio X Family User manual