Bestway Lay-Z-Spa Le manuel du propriétaire

EN

PT

ES

DE

FI

NL

IT

FR

EL

RU

PL

HU

SV

bestwaycorp.com/support

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

IMPORTANT SAFETY INSTRUCTIONS

PRE-SETUP

INSTALLATION

USING THE SPA

MAINTENANCE

DISASSEMBLY AND STORAGE

TROUBLESHOOTING

ERROR CODES

pg 002

pg 012

pg 015

pg 017

pg 018

pg 020

CONTENTS

WE SUGGEST NOT TO RETURN

THE PRODUCT TO THE STORE

QUESTIONS? PROBLEMS?

MISSING PARTS?

For FAQ, Manuals, Videos Or

spare Parts, Please Visit

bestwaycorp.com/support

V

i

s

i

t

w

.

b

e

s

t

w

a

y

c

o

r

p

.

c

o

m

/

s

u

p

o

r

t

f

o

r

h

e

l

p

2

EN WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

Visit the Bestway YouTube channel

OWNER’S MANUAL

S100101/S100201

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

3

WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

4

WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

5

WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

6

WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

7

WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

8

WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

9

WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

10

WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

11

DISPOSAL

Electrical products should not be disposed of with

household waste. Please recycle where facilities

exist. Check with your local authority or retailer for

recycling advice.

READ AND FOLLOW ALL INSTRUCTIONS.

Carefully read, understand, and follow all information in

this user manual before installing and using the spa.

These warnings, instructions, and safety guidelines

address some common risks of water recreation, but

they cannot cover all risks and dangers in all cases.

Always use caution, common sense, and good

judgment when enjoying any water activity. Retain this

information for future use. In addition, the following

information can be supplied depending on the spa type.

Keep these instructions in a safe place. If instructions

are missing, please contact the manufacturer or search it

on the website www.bestwaycorp.com.

WARNINGS – SAFETY INSTALLATION

• The spa must be supplied through an isolating transformer

or supplied through a residual current device (RCD) having

a rated residual operating current not exceeding 30mA.

• The spa must be supplied by an earthed power source.

• The power source on the wall of building should be more

than 4m away from the pool.

• The spa must be connected to a grounded mains supply

socket with a supply cord fitted with a plug and PRCD with

a tripping current of 10mA.

• The SPA must only be plugged directly into an earthed

socket-outlet of the fixed wiring.

• It is necessary to have the plug accessible after installation

of the spa.

• Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

• Do not bury cord. Locate cord to minimize abuse from

lawnmowers, hedge trimmers, and other equipment

CAUTION: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on

and off by the utility.

• Read the instructions before using the appliance and

installation or reassembly every time.

WARNINGS- RISK OF ELECTRIC SHOCK

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA

WHEN IT IS RAINING,THUNDERING OR LIGHTNING.

• Don't use extension cord to connect unit to electric supply;

provide a properly located outlet.

• Don’t plug or unplug the appliance if your hand is wet.

• Never operate any electrical appliance when in your spa or

when your body is wet. Never place any electric appliance,

such as a light, telephone, radio, or television, within 2m of

the spa.

• Install at least 2m from all metal surfaces.

• No part of the appliance is to be located above the bath

during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible

to a person in spa pool; Parts incorporating electrical

components, except remote control devices, must be

located or fixed so that they cannot fall into the spa pool.

• For electric safety, a PRCD is incorporated in the power

cord. If the current leakage is detected more than10mA, the

device will operate and cut-off the power supply. In such

case, please unplug and stop using the spa at once. Don’t

repair the product by yourself. Visit our website

www.bestwaycorp.com to get the necessary information.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension

cord to connect unit to electric supply; provide a properly

located outlet.

WARNINGS- TO REDUCE THE RISK OF INJURY

• The water in a spa should never exceed 40°C (104°F).

Water temperature between 38°C (100°F) and 40°C (104°F)

is considered safe and comfortable for a healthy adult.

Lower water temperatures are recommended for young

children and when spa use exceeds 10 minutes.

• Since excessive water temperatures have a high potential

for causing fetal damage during the early months of

pregnancy, pregnant or possibly pregnant women should

limit spa water temperature to 38°C (100°F). Limit use to

10 minutes at a time.

• If you feel the water is too hot, before entering a spa, the

user should measure the water temperature with an

accurate thermometer. If the water temperature is above

45°C (113°F), stop use of the spa until the temperature is

reduced to under 40°C (104°F). When using an external

thermometer, the temperature showed on the control panel

and the external thermometer may be different. The

difference should be around 3 degrees. This situation is

normal due to the different location where the two

instruments read the temperature.

• The use of alcohol, drugs, or medication before or during

spa use may lead to unconsciousness with the possibility of

drowning.

• Obese people and people with a history of heart disease,

low or high blood pressure, circulatory system problems, or

diabetes should consult a physician before using a spa.

• People using medication should consult a physician before

using a spa since some medication may induce drowsiness

while other medication may affect heart rate, blood

pressure, and circulation.

• Avoid putting your head under the water at all times.

• Avoid swallowing spa water.

• Consider that the comfortable temperature range during use

may be lower than the maximum safe temperature.

• Never operate the spa if inlet/outlet pipes are broken or

missing. Never attempt to replace the inlet/outlet pipes. Visit

our website www.bestwaycorp.com to get the necessary

information.

•

Never pour water with a temperature higher than 40°C (104°F)

into the spa pool directly.

• Do not use the spa alone.

• People with infectious diseases should not use a spa.

• Do not use the spa immediately following strenuous

exercise.

• Immediately leave the spa if you feel uncomfortable or

sleepy.

• Always enter and exit the spa slowly and cautiously. Wet

surfaces are slippery.

• The pump must be tested before each use. To test, follow

the instructions of pump.

• Always keep plug dry, plug in with wet plug is definitely

forbidden.

• Always unplug the appliance:

- Before cleaning or other maintenance.

- If leaving it unattended on holidays.

• Never wear your contact lenses when in your spa.

DANGER - Risk of Injury. The suction fittings in this spa are

sized to match the specific water flow created by the pump.

Should the need arise to replace the suction fittings or the

pump, be sure that the flow rates are compatible. Never

operate the spa if the suction fittings are broken or missing.

Never replace a suction fitting with one rated less than the

flow rate marked on the original suction fitting.

CAUTION: After using your spa for 3-5 years, to ensure the

safety and performance of the spa, the main components,

such as the heating element, air blower motor and non-return

valves have to be checked by a professional electrician. If the

electrician finds problems during the inspection, visit our

website www.bestwaycorp.com to get the necessary

information.

WARNINGS – NON-SWIMMERS SAFETY

• Continuous, active, and vigilant supervision of weak

swimmers and non-swimmers especially in exercise spas,

by a competent adult is required at all times (remembering

that children under five years of age are at the highest risk

of drowning).

• Designate a competent adult to supervise the spa each time

it is being used.

• Weak swimmers or non-swimmers should wear personal

protection equipment, especially when using the exercise

spa.

• When the spa is not in use, or unsupervised, remove all

toys from the spa and its surrounding area to avoid

attracting children to the spa.

WARNINGS – SAFETY DEVICES AND EQUIPMENT

• A safety cover or other safety protection device shall be

used, or all doors and windows (where applicable) shall be

secured to prevent unauthorized access to the spa.

• Barriers, covers, alarms, or similar safety devices are

helpful aids, but they are not substitutes for continuous and

competent adult supervision.

• It is recommended to keep rescue equipment (e.g. a ring

buoy) by the spa (if appropriate).

• Keep a working phone and a list of emergency phone

numbers near the spa.

• It is recommended to consult experts and/or local

authorities to apply local or national laws/regulations

relating to childproof fencing, safety barriers, lighting, and

other safety requirements.

WARNINGS – SAFE USE OF THE SPA

• Encourage all users especially children to learn how to

swim.

• Learn Basic Life Support (Cardiopulmonary Resuscitation

-CPR) and refresh this knowledge regularly. This can make

a life-saving difference in the event of an emergency.

• Instruct all spa users, including children, what to do in case

of an emergency.

• Never dive into any shallow body of water. This can lead to

serious injury or death.

• Do not use the spa when using alcohol or medication that

may impair the bather's ability to safely use the spa.

• When covers are used, remove them completely from the

water surface before entering the spa.

• Protect spa occupants from water related illnesses by

advising them to keep water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user's manual.

• Store chemicals out of the reach of children.

• Use the signage provided on the spa or within 2 meters of

the spa in a prominent visible position.

• Removable ladders, when removed, shall be stored safely

where children cannot climb on it.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Water attracts children; always attach a spa cover after

each use.

DANGER - Risk of Accidental Drowning (especially children

under 5 years). Caution shall be exercised to prevent

unauthorized access to the spa by children. This can be

reached by adult supervisor securing the means of access or

installing a safety protection device to the spa. To avoid

accidents during spa use, ensure that children are kept under

constant adult supervision.

WARNINGS - SAFE WATER MAINTENANCE AND

CHEMICAL USE

• Never add water to chemicals. Always add chemicals to

water to avoid strong fumes or violent reactions that may

result in hazardous chemical spray.

• Regarding the information pertaining to cleaning,

maintenance of water, and disposal of water, please see the

"MAINTENANCE" section.

• Do not use spa during chemical maintenance.

• Any manual dosing of chemicals shall not be performed

while bathers are present in the spa.

• Consult your local government authority for water

regulations related to convenient water supply for filling the

spa.

WARNINGS - SAFE SETUP AND STORAGE

• We strongly recommend not to unfolding and inflating the

spa if the ambient temperature is below 15°C (59°F). We

suggest inflating the spa indoors, and then continuing to

setup outdoors. If the outdoor temperature is lower than 6°C

(42.8°F), the spa heater must always be on. In this mode,

the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and10°C (50°F) to

prevent damage, such as water freezing in the pipes or the

circulation system.

CAUTION: If alarms pop up on the spa, the Freeze Shield™

system will stop working. Be sure to check the status of your

spa if the outdoor temperature is below 6°C (42.8°F). In case

of a long-term absence from home when there is a risk

of temperatures falling below 6°C (42.8°F), we strongly

suggest disassembling the spa and storing it following the

storage procedure.

• When the appliance will be not used for a long time, such

as in the winter, the spa or pool set should be disassembled

and stored indoors.

• Do not to place the spa on a slippery surface and make

sure the surface is free of sharp objects before installation.

• To avoid damage to the pump, the spa must never be

operated unless the spa is filled with water.

• For safety reasons, only use the accessories provided or

approved by the spa manufacturer.

• Regarding the information pertaining to the installation, refer

to the following paragraph of the manual.

• Whenever the spa is emptied, the filter should be cleaned

(and drained/dried, where applicable).

• Please examine equipment before use. Notify Bestway at

the customer service address listed on this manual for any

damaged or missing parts at the time of purchase. Verify

that the equipment components represent the models that

you had intended to purchase.

• This product is not intended for commercial use.

• Always keep the spa cover on to minimize heat loss during

heating of the spa between uses (but not while it is being

used). Ensure the cover is fitted tightly, as per instructions

to maximize insulation. It shall be recommended that the

cover, when not in use, should be kept off the ground to

retain its cleanliness (particularly the surface in close

proximity to the water spa water surface). The cover should

be stored in an appropriate location, where it cannot be

damaged, or cause damage.

• Check the set water temperature and consider lowering it

for the times when the spa will typically not be in use.

• Depending on external conditions, consider turning off the

heater entirely if not using the spa for an extended period

of time (where the spa provides this option, but still

maintains residual disinfection/pH-values).

• It is recommended to use an insulating ground cloth

underneath the spa to minimize heat loss through the bottom

of the spa.

• Maintain clean filters to preserve appropriate working

conditions for the pump and avoid unnecessary water

replacement and re-heating.

• Keep the spa away from the rest area to minimize noise

disturbance.

• Do not put the cover on the ground or any other dirty surface

when not in place on the spa.

• When the spa is being used, the cover should be placed in a

clean, dry area, otherwise it can pick up dirt and bacteria.

Covers should not be put on wooden tables or wooden

decking because of the risk of bleaching the wood. A cover

lifter, or similar device, is useful for ensuring that the cover

does not come into contact with the ground. A cover lifter is

strongly recommended for spas in rental settings.

• Recommended to ask a qualified contractor or a structural

engineer to verify if the support material is strong enough to

support the maximum design load of the spa, spa water and

bathers. Read the filled weight information on the package.

WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi

• Transmitter working frequency: 2412~2472MHz

• Transmitter maximum output power:19dBm

WARNINGS - PRCD

• Before inserting plug into a power outlet, make sure the

current rate of the power outlet is suitable for the pump.

• The spa is a class I electrical appliance and must be

connected directly to a grounded socket. It is recommended to

only use a socket which is resistant to humidity and capable of

high-power loading. Regularly check the plug and socket for

signs of damage before using the spa – do not use the spa if

the plug or socket is damaged. If you are unsure about the

quality of the electrical supply, please consult a qualified

electrician before use.

• The PRCD plug must be tested before each use to avoid risk

of electric shock.

• Do not use the pump if this test fails. For assistance, please

visit the support section on our website,

www.bestwaycorp.com.

SAVE THESE INSTRUCTIONS

PRE-SETUP

CHECK LIST

To check the parts printed on the package, verify that the

equipment components represent the model that you had

intended to purchase. In case of any damaged or missing

parts at the time of purchase, visit our website

bestwaycorp.com/support.

CHOOSE THE CORRECT LOCATION

Indoor and outdoor & above ground & portable wiring &

portable spa.

Only For Spas Equipped With Wi-Fi:

To choose the correct location for the spa equipped with Wi-Fi,

read the Spa Wi-Fi instruction leaflet included in the package

and the following instructions.

For All Spas:

The surface chosen to install the pool must respect the

following technical characteristics.

• Because of the combined weight of the water inside the spa

and the users, it is extremely important that the surface

chosen to install the spa is capable of uniformly supporting

the total weight for the entire time the spa is installed.

• An adequate drainage system has to be provided to deal with

overflow water for both indoor and outdoor installations.

During filling, draining or when in use, water may flow out of

the spa.

• The surface must be flat and smooth. If the surface is

inclined or uneven, it can create an unbalanced loading on

the structure of the spa. This situation can damage the

welding point.

• The selected surface must be clear of any type of object.

Due to the weight of the water, any object under the spa

could damage or perforate the bottom of the spa.

• The selected location must not have overhead power lines or

trees. Be sure the location does not contain underground

12

utility pipes, lines or cables of any kind.

• The selected position must be far from the house entrance.

Do not position any equipment or other furniture around the

spa. The water that comes out of the spa during the use or

due to a faulty product can damage the furniture inside the

house or surrounding the pool.

• Do not to install the spa on carpet or other floor materials

(e.g. untreated cork, timber or other porous materials) that

promote or harbor moisture and bacteria, or that could be

affected by water treatment chemicals used in the spa.

• Consult your local government authority for installation

regulations.

Suggested set-up surfaces: grass, ground, concrete, and all

other surfaces that respect the above set-up conditions.

Not suggested surfaces: mud, sand, gravel, deck, balcony,

driveway, platform, soft/loose soil or other surface that does

not meet the above set-up conditions.

Indoor Installation:

Be aware of special requirements if you install the spa

indoors.

• Humidity is a natural side effect with Lay-Z-Spa installation.

Determine the effects of airborne moisture on exposed wood,

paper, etc. in the proposed location. To minimize these

effects, it is strongly recommended to provide plenty of

ventilation to the selected area. Consult an expert to

determine if more ventilation is needed.

• Keep suitable air treatment in the indoor location (ventilation

and dehumidification) regularly to preserve the bathers’

safety and comfort.

• Empty the spa before removing it from the indoor location or

building.

Outdoor Installation:

• The selected surface must be clear of aggressive plants and

weed species. Those types of strong vegetation could grow

through the liner and create water or air leakage. The grass

or other vegetation that may cause odor or slime to develop

have to be eliminated from the set-up location.

• Do not leave the spa's surface exposed to direct sunlight for

long periods of time. We recommend protecting the spa from

direct sun light exposure by a cover when not in use.

• Follow the important instructions above to choose the correct

surface and location to set up your spa. Damaged parts of

the spa, due to the fact that the set-up surface and location

does not match the instructions, will not be considered as

manufacture defect and will avoid the warranty and any

service claims. It is the responsibility of the owner to ensure

the site meets the requirements at all times.

• Consult your local professional installers for environmental

conditions, such as ground water and risk of frost.

SPA HEATER EQUIPOTENTIAL BONDING TERMINAL

• It is recommended to arrange for a qualified electrician to

connect the spa pump to an equipotential bonding terminal

using a minimum 2.5mm

2

solid copper conductor.

CHECK LIST

To check the parts printed on the package, verify that the

equipment components represent the model that you had

intended to purchase. In case of any damaged or missing

parts at the time of purchase, visit our website

bestwaycorp.com/support.

CHOOSE THE CORRECT LOCATION

Indoor and outdoor & above ground & portable wiring &

portable spa.

Only For Spas Equipped With Wi-Fi:

To choose the correct location for the spa equipped with Wi-Fi,

read the Spa Wi-Fi instruction leaflet included in the package

and the following instructions.

For All Spas:

The surface chosen to install the pool must respect the

following technical characteristics.

• Because of the combined weight of the water inside the spa

and the users, it is extremely important that the surface

chosen to install the spa is capable of uniformly supporting

the total weight for the entire time the spa is installed.

• An adequate drainage system has to be provided to deal with

overflow water for both indoor and outdoor installations.

During filling, draining or when in use, water may flow out of

the spa.

• The surface must be flat and smooth. If the surface is

inclined or uneven, it can create an unbalanced loading on

the structure of the spa. This situation can damage the

welding point.

• The selected surface must be clear of any type of object.

Due to the weight of the water, any object under the spa

could damage or perforate the bottom of the spa.

• The selected location must not have overhead power lines or

trees. Be sure the location does not contain underground

13

utility pipes, lines or cables of any kind.

• The selected position must be far from the house entrance.

Do not position any equipment or other furniture around the

spa. The water that comes out of the spa during the use or

due to a faulty product can damage the furniture inside the

house or surrounding the pool.

• Do not to install the spa on carpet or other floor materials

(e.g. untreated cork, timber or other porous materials) that

promote or harbor moisture and bacteria, or that could be

affected by water treatment chemicals used in the spa.

• Consult your local government authority for installation

regulations.

Suggested set-up surfaces: grass, ground, concrete, and all

other surfaces that respect the above set-up conditions.

Not suggested surfaces: mud, sand, gravel, deck, balcony,

driveway, platform, soft/loose soil or other surface that does

not meet the above set-up conditions.

Indoor Installation:

Be aware of special requirements if you install the spa

indoors.

• Humidity is a natural side effect with Lay-Z-Spa installation.

Determine the effects of airborne moisture on exposed wood,

paper, etc. in the proposed location. To minimize these

effects, it is strongly recommended to provide plenty of

ventilation to the selected area. Consult an expert to

determine if more ventilation is needed.

• Keep suitable air treatment in the indoor location (ventilation

and dehumidification) regularly to preserve the bathers’

safety and comfort.

• Empty the spa before removing it from the indoor location or

building.

Outdoor Installation:

• The selected surface must be clear of aggressive plants and

weed species. Those types of strong vegetation could grow

through the liner and create water or air leakage. The grass

or other vegetation that may cause odor or slime to develop

have to be eliminated from the set-up location.

• Do not leave the spa's surface exposed to direct sunlight for

long periods of time. We recommend protecting the spa from

direct sun light exposure by a cover when not in use.

• Follow the important instructions above to choose the correct

surface and location to set up your spa. Damaged parts of

the spa, due to the fact that the set-up surface and location

does not match the instructions, will not be considered as

manufacture defect and will avoid the warranty and any

service claims. It is the responsibility of the owner to ensure

the site meets the requirements at all times.

• Consult your local professional installers for environmental

conditions, such as ground water and risk of frost.

SPA HEATER EQUIPOTENTIAL BONDING TERMINAL

• It is recommended to arrange for a qualified electrician to

connect the spa pump to an equipotential bonding terminal

using a minimum 2.5mm

2

solid copper conductor.

CHECK LIST

To check the parts printed on the package, verify that the

equipment components represent the model that you had

intended to purchase. In case of any damaged or missing

parts at the time of purchase, visit our website

bestwaycorp.com/support.

CHOOSE THE CORRECT LOCATION

Indoor and outdoor & above ground & portable wiring &

portable spa.

Only For Spas Equipped With Wi-Fi:

To choose the correct location for the spa equipped with Wi-Fi,

read the Spa Wi-Fi instruction leaflet included in the package

and the following instructions.

For All Spas:

The surface chosen to install the pool must respect the

following technical characteristics.

• Because of the combined weight of the water inside the spa

and the users, it is extremely important that the surface

chosen to install the spa is capable of uniformly supporting

the total weight for the entire time the spa is installed.

• An adequate drainage system has to be provided to deal with

overflow water for both indoor and outdoor installations.

During filling, draining or when in use, water may flow out of

the spa.

• The surface must be flat and smooth. If the surface is

inclined or uneven, it can create an unbalanced loading on

the structure of the spa. This situation can damage the

welding point.

• The selected surface must be clear of any type of object.

Due to the weight of the water, any object under the spa

could damage or perforate the bottom of the spa.

• The selected location must not have overhead power lines or

trees. Be sure the location does not contain underground

14

utility pipes, lines or cables of any kind.

• The selected position must be far from the house entrance.

Do not position any equipment or other furniture around the

spa. The water that comes out of the spa during the use or

due to a faulty product can damage the furniture inside the

house or surrounding the pool.

• Do not to install the spa on carpet or other floor materials

(e.g. untreated cork, timber or other porous materials) that

promote or harbor moisture and bacteria, or that could be

affected by water treatment chemicals used in the spa.

• Consult your local government authority for installation

regulations.

Suggested set-up surfaces: grass, ground, concrete, and all

other surfaces that respect the above set-up conditions.

Not suggested surfaces: mud, sand, gravel, deck, balcony,

driveway, platform, soft/loose soil or other surface that does

not meet the above set-up conditions.

Indoor Installation:

Be aware of special requirements if you install the spa

indoors.

• Humidity is a natural side effect with Lay-Z-Spa installation.

Determine the effects of airborne moisture on exposed wood,

paper, etc. in the proposed location. To minimize these

effects, it is strongly recommended to provide plenty of

ventilation to the selected area. Consult an expert to

determine if more ventilation is needed.

• Keep suitable air treatment in the indoor location (ventilation

and dehumidification) regularly to preserve the bathers’

safety and comfort.

• Empty the spa before removing it from the indoor location or

building.

Outdoor Installation:

• The selected surface must be clear of aggressive plants and

weed species. Those types of strong vegetation could grow

through the liner and create water or air leakage. The grass

or other vegetation that may cause odor or slime to develop

have to be eliminated from the set-up location.

• Do not leave the spa's surface exposed to direct sunlight for

long periods of time. We recommend protecting the spa from

direct sun light exposure by a cover when not in use.

• Follow the important instructions above to choose the correct

surface and location to set up your spa. Damaged parts of

the spa, due to the fact that the set-up surface and location

does not match the instructions, will not be considered as

manufacture defect and will avoid the warranty and any

service claims. It is the responsibility of the owner to ensure

the site meets the requirements at all times.

• Consult your local professional installers for environmental

conditions, such as ground water and risk of frost.

SPA HEATER EQUIPOTENTIAL BONDING TERMINAL

• It is recommended to arrange for a qualified electrician to

connect the spa pump to an equipotential bonding terminal

using a minimum 2.5mm

2

solid copper conductor.

LOCK/UNLOCK BUTTON: The pump has a 5-minute auto-lock, this light will turn on. To lock or unlock the pump, press the lock/unlock

button for 2 seconds.

MASSAGE SYSTEM BUTTON:Press button to activate the massage system, which has a 30-minute auto-shutoff feature.

The light of the button becomes red when activated.

Do not run the massage system when the cover is attached, air can accumulate inside the spa and cause irreparable damage

to the cover. Heat and massage system can be activated at the same time.

FOR SPA EQUIPPED WITH Wi-Fi ONLY

2-LEVEL MASSAGE REGULATION: Push once for the full power massage; the display will show L1. Push it again for a lower power

massage; the display will show L2. Push it a third time to shut the massage function off.

When inflating the spa liner, make sure that the massage function is running at full power.

Press the button and the LED starts to flash.

Press the or button to adjust the heating duration (From 1-999 hours).

Press the button again to confirm the heating duration.

After setting the heating duration, the LED starts to flash.

Press the or button to set the time (From 0-999 hours). This setting defines the waiting hours before the activation of the heating

function. If the timer is set to 0 hour, the heating system will activate immediately.

Press button again or simply touch nothing for 10 seconds to confirm the setting. The LED will light steadily, and the countdown to

heater activation will begin. The screen flashes the current temperature and time alternately.

To modify the timer settings: Press the button and use the or button to adjust.

Cancel the setting: Press the button for 2 seconds.

When the power saving function is activated, all other functions (massage, filtration) except the heating can be used.

The POWER-SAVING function in not an automatic function: after one complete cycle (waiting time plus heating function), this function

must set again.

POWER-SAVING TIMER BUTTON: Designed to help avoid wasting power by setting the time and duration of the heating cycle for the spa.

follow these steps to activate the POWER-SAVING function.

HEAT BUTTON:Press button to activate the heating system. When the light of the button is red, the heating system is activated.

When the light is green, the water reached the set temperature.

If the heating system is activated, the filtration system will automatically start.

After turning off the heating system, the filtration system will continue to operate.

RECOMMENDATIONS DURING THE INSTALLATION

• Use of an extension cord or multi-plug adaptor with the spa heater is dangerous and can cause the plug to overheat, causing damage to the equipment

and surrounding items.

• Keep the spa away from the rest area to minimize noise disturbance.

• Keep at least 1m clearance around the spa.

• We don't recommend using sea water to fill the pool. Sea water can corrode the internal metal components due to the high concentration of salt.

• The filtration system of the spa is designed to be used only with the filter cartridge. Any other component added inside the filter set can cause damage

to the filtration system of the spa. This will not be covered by customer service.

INFLATION INFORMATION

Only For Inflatable Spa Liner or Inflatable Cover:

• When inflating, you will notice that air will be expelled from the area where the air hose connects to the pump, this is

normal for technique requirements.

• Don't cover the holes on the base of the inflation hose, the inflation hose is designed to inflate the spa to the correct

pressure. This operation will over inflate the liner and damage the structure.

• Do not use an air compressor to inflate the spa.

• Do not drag the pool on rough ground as this may cause damage to the spa liner. Inflation time for reference only.

HAND PUMP PRESSURE GAUGE

Only For Fortifiber Spa:

• The air pressure gauge of the hand pump only shows the air pressure higher than

5 psi, which is normal. When the air pressure in the product is lower than 5 psi, the air pressure gauge will not show a value.

AIR VALVE CHECK

Only For Fortifiber Spa

• If the air valve is loose, use the provided wrench to fasten the air valve following these steps: With one hand, hold the backside of the air valve from the

inner side of the spa wall and turn the wrench clockwise.

• Do not adjust the air valve connector when the spa is in use.

USING THE SPA

CONTROL PANEL AIRJET AIRJET WITH Wi-Fi

For the installation instructions, follow the drawings printed on the package. Drawings are for illustration purposes only. May

not reflect actual product. Not to scale.

15

INSTALLATION

TEMPERATURE ADJUSTMENT BUTTONS:Pressing

the or button, the display starts to flash showing

the set temperature for 3 seconds, after that it will show

again to the real water temperature. When it is flashing you

can adjust the temperature using the or button.

The default temperature is 35°C (95°F).

Temperature adjustment ranges from 20°C (68°F) to

40°C (104°F).

ON/OFF BUTTON:After activating the PRCD, press and

hold the button for 2 seconds. The button turns

to green and the control panel is activated. Press and

hold button for 2 seconds to turn off all currently

activated functions.

CELSIUS/FAHRENHEIT TOGGLE:The temperature

can be displayed in either Fahrenheit or Celsius.

WATER FILTER BUTTON:The button turns the filter

pump on and off. The button turns to red when

activated.

FOR SPA EQUIPPED WITH Wi-Fi ONLY

Wi-Fi ACTIVATION:For the Wi-Fi operation instruction,

read the spa Wi-Fi instruction leaflet included in the

package.

The WATER HEATER rate may change in the conditions below:

• When the outdoor temperature is below 15°C (59°F).

• If the cover is not in position. Always keep the spa cover on when the spa is not in use; it avoids dust contaminating the water and it minimizes heat

loss.

• The water temperature shown on the display may not be correct, if the filtration system is not activated. To read the correct water temperature on the

display, run the filtration system for at least a minute.

• The water temperature as tested by an external thermometer may vary from the temperature as displayed on the spa panel by as much as

approximately 2°C (35.6°F).

WINTER USE INSTRUCTIONS

HEATING TIME

• To reach 40°C (104°F), the heating duration required is based on the starting water temperature and ambient temperature, the data below is purely for

reference. To display the current water temperature, run the filter system for at least a minute.

• Be sure to cover the spa with the spa cover whenever the heating function is activated. Leaving the spa uncovered

will increase the heating duration required. When the spa is assembled with water, do not switch off the spa heater if

the temperature is lower than 6ºC (42.8°F).

16

SPA HEATER SPECIFICATION

Ambient Temperature

10ºC (50ºF)

15ºC (59ºF)

20ºC (68ºF)

25ºC (77ºF)

30ºC (86ºF)

Water Temperature

10ºC (50ºF)

15ºC (59ºF)

20ºC (68ºF)

25ºC (77ºF)

30ºC (86ºF)

Set Temperature

40ºC (104ºF)

Heating Duration

16-24h

12-20h

10-18h

8-12h

5-8h

Power Rate Massage Tube Power Heat Element Power Water Pump Power

2,000W at 20ºC 50W

220-240V AC, 50Hz,

Single Phase 2,050W at 20ºC 800W

It is important to follow these suggestions if you are setting up the spa during the winter period. This will prevent any damage to the spa

heater and material of the liner, extending the life of your product drastically.

• If the outdoor temperature is below 10°C (50°F), to avoid any damage to spa liner, keep the package indoors where the temperature is above

15°C (59°F). This will make the spa liner more flexible and easier to set up.

• Open the package and inflate the spa liner using the spa heater in a room where the temperature is above 15°C (59°F).

• Position the spa liner outdoors in the desired position, then connect the spa heater and fill with water. The water temperature used to fill the spa must be

above 6°C (42.8°F), otherwise when you begin to operate with the spa heater, the E03 alarm will appear.

• You can keep the spa on during winter when the temperature is lower than 6°C (42.8°F). The Freeze Shield™ system automatically keeps the water

temperature between 6°C (42.8°F) and 10°C (50°F), and it will prevent the water from freezing.

• If the water temperature is below 6°C (42.8°F), the spa heater must always be on. In this mode, the Freeze Shield™ system can keep the internal

temperature between 6°C (42.8°F) and 10°C (50°F) to prevent damage, such as water freezing in the pipes or the circulation system.

• If any alarms appear on the display, the Freeze Shield™ system isn’t working. Be sure to check the status of your spa if the outdoor temperature is

below 6°C (42.8°F). In case of a long-term absence from home when there is a risk of temperatures falling below 6°C (42.8°F), we strongly suggest

disassembling the spa and storing it following the storage procedure.

• Any damage as a result of using the spa in these conditions is the responsibility of the customer. Do not use the spa when the ambient temperature

reaches -10°C (14°F).

DISASSEMBLY AND STORAGE

CAUTION: You must ensure the pump is unplugged before beginning spa maintenance to avoid risk of injury or death.

LINER

• It is normal that your spa liner may appear as if it is losing air. Changes in ambient temperature may change the internal air pressure in the liner.

• When detaching the pump from the liner, to avoid water coming out from the pipes, block the air pipe by screwing on the cap and installing the stoppers

on the debris screens.

COVER

• The cover shall be cleaned inside and outside periodically, using a gentle detergent for the PVC material.

FILTER CARTRIDGE

• To optimize the performance of the filtration system, check and clean your filter cartridge every day.

• We recommend changing your filter cartridge every week or replacing it if after washing, the filter cartridge remains soiled and discolored.

WATER

Many pollutants in the water settle on surfaces below the water line. These pollutants can cause bacterial, algal or fungal growth. It is recommended that

spas are cleaned as regularly as necessary. After a time, tenacious stains or biofilms may develop on the accessible surfaces below the water line or high

concentrations of salts or unwanted reaction by-products may also occur. Depending on hygienic condition, cleanliness, visibility, odour, debris and

stains, it is recommended to change the water completely and clean/disinfect the spa. When emptying the spa, the regulations and the instructions for

draining the water shall be observed.

• Keeping your spa water clean and chemically balanced is necessary. Simply cleaning the filter cartridge is not enough for proper maintenance, we

recommend using pool chemicals to maintain water chemistry and chlorine or bromine tablets (do not use granules) with the chemical dispenser.

• Water quality will be directly related to frequency of use, number of users and overall maintenance of the spa. The water should be changed every

3 days if there is no chemical treatment being performed with the water. It is highly recommended to use tap water for spa filling to minimize the

influence of unwanted contents, such as minerals.

• We recommend you take a shower before using your Lay-Z-Spa, as cosmetic products, lotions, and other residues on the skin can quickly degrade

water quality.

• Don't throw chemical products directly in the water; the chemical will deposit on the bottom of the spa and damage the material and discolor the PVC.

Chemical Tablets (Not Included):

• Remove the chemical dispenser from spa when the spa is in use.

• After performing chemical maintenance and before using the spa, use a test kit (not included) to test the water chemistry. We recommend maintaining

your water chemical balance as the following:

• Spa damage resulting from misuse of chemicals and mismanagement of spa water is not covered by the warranty.

• Pool chemicals are potentially toxic and should be handled with care. There are serious health risks from chemical vapors and the incorrect labeling and

storage of chemical containers.

• Please consult your local pool or chemical supply retailer for more information about chemical maintenance. Pay close attention to the chemical

manufacturer’s instructions.

• Over usage of chemicals will discolor the printing and all points of the spa material; in the worst case, it will damage the structure of the spa liner.

DRAINING

• To drain the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product. Not to scale.

DRYING

• After draining the spa, some water remains inside the spa pump, liner chamber, massage chain and inflatable cover. Make sure that all above parts of

spa are completely dry. This is essential to extend the life of the spa and to avoid creation of mildew.

• The water inside the liner chamber and the inflatable cover come from the humidity in the air used to inflate them. The quantity of water may vary

depending on the percentage of humidity in your area.

• To dry the different parts of the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product.

Not to scale.

CLEANING

• Detergent residues and dissolved solids from bathing suits and chemicals may build up on the spa walls. Use soap and water to clean the walls and

rinse thoroughly. Do not use hard brushes or abrasive cleaners.

DEFLATING

Only For Inflatable Spas:

• Your spa is equipped with a deflation function to remove all the air from inside the chamber to make it easier to pack and store.

• To deflate the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product. Not to scale.

REPAIRING

For PVC Material

If the spa is torn or punctured, use the provided PVC repair patch and follow the below steps:

• Clean the area to be repaired. Carefully peel patch.

• Press patch over the area to be repaired.

• Wait 30 seconds before inflation.

For DuraplusTM PVC Material:

If the spa is torn or punctured, use the provided PVC patch and glue (not included) and follow the below steps:

• Clean and dry the area to be repaired.

• Cut the provided PVC patch to appropriate size.

• Use glue (not included) to coat the one side of the newly cut patch. Make sure the glue is evenly distributed. Wait for 30 seconds and then place the cut

patch with glue over the damaged area.

• Smooth out any bubbles of air that may be trapped underneath, and press firmly for two minutes.

• Wait 30 minutes before inflation.

STORAGE

• Remove all accessories and make sure that spa liner, inflatable cover, pump and accessories are completely clean and dry before storing. If spa is not

completely dry, mold may result and will damage the spa liner during the storage period.

• Fold the spa liner only if the environment temperature is above 10ºC (50ºF). If spa is not completely dry, mold may result and will damage the pool liner.

• Store the spa in a dry place with a moderate temperature between 10ºC (50ºF) and 38ºC (100ºF).

• We strongly recommend positioning the spa liner and inflatable cover inside a carton box, to better protect the PVC material during winter months.

17

MAINTENANCE

pH

7.4-7.6

Total Alkalinity

80-120ppm

Free Chlorine

2-4ppm

Problems

Pump does not operate

Pump does not

heat properly with lid

Massage System

does not work

Pump adapters are not

level with the spa

adapters

Spa pool air leakage

Water is not clean

Probable Causes

- Spa is torn or punctured

- Air valve is loose

Solutions

- Check power source

- For assistance, please visit the support section on our website,

www.bestwaycorp.com

- Power failure

- Power circuits is broken

- Air pump is overheating

- The massage stops automatically

after 30 minutes

- Air pump is broken

- Elevate the pump with wood or another type of insulated material to

bring the pump's adapters level with the spa's adapters

- One characteristic of material is that it

changes shape,which is normal

- Insufficient filtering time

- Dirty filter cartridge

- Improper water maintenance

- Unplug the pump and wait two hours until the pump has cooled. Insert

the plug and press the Massage System Button

- Press the Massage System Button to reactivate

- For assistance, please visit the support section on our website,

www.bestwaycorp.com

- Increase filtration time

- Clean/replace the filter cartridge (refer to Filter Cartridge Cleaning and

Replacement section)

- Refer to the chemical manufacturer’s instructions

- Use provided repair patch

- Using soapy water, cover the air valve to check if air is leaking. If so,

1. Screw valve: fasten the air-valve by tuning the valve clockwise.

2. For Fortifiber SPA: Deflate the spa. With one hand, hold the backside

of the air valve from the inner side of the spa wall and turn the wrench

clockwise.

- Set spa to a higher temperature; refer to pump operation section

- Clean/replace the filter cartridge; refer to section filter cartridge

cleaning and replacement section

- Attach the cover

- For assistance, please visit the support section on our website,

www.bestwaycorp.com

- Temperature set too low

- Dirty filter cartridge

- Spa is not covered with lid

- Heating element failed

18

TROUBLESHOOTING

Problems

The Wi-Fi setup is not

successful

Probable Causes Solutions

The pump has been connected to the

wrong band

If the router your pump is connected to is dual-band and currently not

connecting to a 2.4GHz network, please switch to another band of the

same router (2.4GHz) and try to pair pump heater again. 5GHz networks

are not supported.

The spa pump location is too far from

the router.

Set up with the wrong network name Start the connection procedures again and be sure that the network

name is typed correctly.

The Wi-Fi password used

during the connection is wrong

Start the connection procedures again and be sure that the password is

correct.

The strength of the Wi-Fi signal is not

stable

1. Check that the router works correctly.

2. Go near the spa and check the signal on your phone. If the signal

strength is not stable, check the condition of your router. If the signal

strength is full, repeat the operation to connect the spa to the network.

There is an appliance near the spa

pump or the router that creates signal

interference

The Wi-Fi connectivity can be interrupted by electromagnetic or other

interferences. Keep the appliance away from other electronic devices

that may cause interferences.

Your phone will not connect to the Wi-Fi

network during the registration

Check if the mobile device is in airplane mode.

Make sure to have the airplane mode deactivated when connecting to

the Wi-Fi network.

APP Feedback Consult the help section in the APP for extensive and up-to-date

troubleshooting tips.

Check with your cell phone to see if there is full Wi-Fi signal.In case the

strength of the signal on your phone is too low, check where the strength

of the Wi-Fi signal is full and place the spa in that position.

Indicator light is on

Indicator light flashes quickly

Indicator light is off

Indicator light flashes slowly

Connected to the router

Lost Wi-Fi signal

Light damaged / Wi-Fi module has

problem

Waiting to connect to the router

The pump already connected to your phone

Check the status of your router. The spa lost the Wi-Fi signal.

For more information, please visit the support section on our website,

www.bestwaycorp.com.

The pump is ready to connect to your phone

Wi-Fi LED Status

19

ONLY FOR SPA EQUIPPED WITH Wi-Fi

1. Unplug the plug gently, strike the side of the pump but not violently, and plug it

back in.

2. For assistance, please visit the support section on our website,

www.bestwaycorp.com.

CAUSES REASONS SOLUTIONS

The water flow sensors work without

pressing the filter or heat button.

1. The water flow sensor flags didn’t fall back into the

correct position.

2. The water flow sensors are broken.

After starting or during the

functions of filtering or/and

heating, the water flow sensors do

not detect water flow.

1. You forgot to remove the 2 stopper caps from

inside the pool.

2. Filter cartridges are dirty.

3. Activate the filter or heat system and put your

hand in front of the outlet pipe inside the pool to

check if you can feel water flowing out.

a. If no water flows out the water pump is broken.

b. Water flows out but the alarm appears,

the water flow sensors are broken.

4. Filter blockage

5. Bent pipes or poor water flow through the plastic

pipes of the liner

6. Debris screens are blocked: Debris screens can

become blocked by hard water due to calcium

build-up.

7. Perished washers

The washers within the spa couplings may have

become perished or worn.

1. Remove the 2 stopper caps before heating. Refer to the Assembly section in

the User’s Manual.

2. Remove the filter set from inside the pool and push the filter or heat button. If

no alarm appears, clean or change the filter cartridges installed inside the pool.

3. For assistance, please visit the support section on our website,

www.bestwaycorp.com.

4. Clean the filter and check for damage. Replace or re-install as necessary. For

assistance, please visit the support section on our website,

www.bestwaycorp.com.

5. Please check through the spa connection to see if the pipes are bending. For

assistance, please visit the support section on our website,

www.bestwaycorp.com.

6. Empty the spa and place a garden hose inside the pipes to wash the debris. To

be sure all debris are removed, perform the operation from the outside and

inside of the spa.

Use a toothbrush to remove any stubborn debris.

For assistance, please visit the support section on our website,

www.bestwaycorp.com.

7. Check the washers inside the coupling for damage. Unscrew the couplings and

remove the washer for further inspection.

For assistance, please visit the support section on our website,

www.bestwaycorp.com.

The pump’s thermometer reads the

water temperature below

4°C (40°F).

1. The water temperature is lower than 4°C (40°F)

2. If the water temperature is higher than 7°C (44.6°F),

the pump’s thermometer is broken.

1. The spa is not designed to operate with water temperatures lower than 4ºC

(40°F). Unplug the pump and only re-start the pump when the water

temperature reaches 6°C (43°F).

2. For assistance, please visit the support section on our website,

www.bestwaycorp.com.

The pump’s

thermometer reads the water

temperature over 50°C (122°F).

1. The water temperature is over 50°C (122°F)

2. The ambient temperature is higher than 40°C (104°F)

or the spa is exposed to direct sunlight for an extended

period of time.

3. If the water temperature is lower than 45°C (113°F),

the pump’s thermometer is broken.

1. The spa is not designed to operate with water temperatures greater than

40°C (104°F). Unplug the pump and only re-start the pump when the water

temperature reaches 38°C (100°F) or lower.

2. Disconnect the plug, detach the pump and drain the spa. After 15 minutes,

reattach the pump, reconnect the plug and restart the heating function. If the

alarm appears again, consider moving the spa to another location without

direct sunlight.

3. For assistance, please visit the support section on our website,

www.bestwaycorp.com.

The pump’s thermometer

connection has issues.

1.The connection between the temperature sensor and

the PCB may have an issue.

1.Unplug the spa , wait 5 minutes, and then plug it back in while switching the

pump on.

2.If the alarm appears again, please visit the support section on our website,

www.bestwaycorp.com.

The pump’s thermometer reads the water

temperature over 52°C (125.6°F).

1. The water temperature is over 52°C (125.6°F)

2. The ambient temperature is higher than 40°C (104°F)

or the spa is exposed to direct sunlight for an extended

period of time.

3. If the water temperature is lower than 45°C (113°F),

the pump’s thermometer is broken.

1. The spa is not designed to operate with water temperatures greater than 40°C

(104°F). Unplug the pump and only re-start the pump when the water temperature

reaches 38°C (100°F) or lower.

2. Disconnect the plug, detach the pump and drain the spa. After 15 minutes, reattach

the pump, reconnect the plug and restart the heating function. If the alarm appears

again, consider moving the spa to another location without direct sunlight.

3. For assistance, please visit the support section on our website, www.bestwaycorp.com.

Ground connection failed.

1. The ground system of the wall socket where

the spa is connecte has a problem.

2. The pump has a problem.

1. Connect the spa pump to a new socket or call an electrician to check

the wall socket. If the problem continues, we suggest creating an

independent grounding connection to the wall socket.

2. For assistance, please visit the support section on our

website,www.bestwaycorp.com.

Wi-Fi module is damaged For assistance, please visit the support section on our website,

www.bestwaycorp.com.

NOTE: Press any button to remove alarm and continue to use the spa.

Wi-Fi module connection failed.

1. The pump has detected electric through the

ground wire. An appliance in your home have

an electric leak.

2. The pump has a problem.

1. Call an electrician immediately to understand if power is flowing inside the

grounding connection. If the problem continues, to use your spa safely, we strongly

recommend connecting the spa plug to a socket with independent grounding.

2. For assistance, please visit the support section on our website,

www.bestwaycorp.com.

Detected electric from ground wire.

ERROR CODES

20

La page charge ...

Bestway Lay-Z-Spa Le manuel du propriétaire

Bestway Lay-Z-Spa Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents