Bestway Lay-Z-Spa Le manuel du propriétaire

Taper
Le manuel du propriétaire
EN
PT
ES
DE
FI
NL
IT
FR
EL
RU
PL
HU
SV
bestwaycorp.com/support
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
IMPORTANT SAFETY INSTRUCTIONS
PRE-SETUP
INSTALLATION
USING THE SPA
MAINTENANCE
DISASSEMBLY AND STORAGE
TROUBLESHOOTING
ERROR CODES
pg 002
pg 012
pg 015
pg 015
pg 017
pg 017
pg 018
pg 020
CONTENTS
WE SUGGEST NOT TO RETURN
THE PRODUCT TO THE STORE
QUESTIONS? PROBLEMS?
MISSING PARTS?
For FAQ, Manuals, Videos Or
spare Parts, Please Visit
bestwaycorp.com/support
V
i
s
i
t
w
w
w
.
b
e
s
t
w
a
y
c
o
r
p
.
c
o
m
/
s
u
p
p
o
r
t
f
o
r
h
e
l
p
2
EN WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
Visit the Bestway YouTube channel
OWNER’S MANUAL
S100101/S100201
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
3
WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
4
WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
5
WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
6
WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
7
WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
8
WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
9
WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
10
WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
11
DISPOSAL
Electrical products should not be disposed of with
household waste. Please recycle where facilities
exist. Check with your local authority or retailer for
recycling advice.
READ AND FOLLOW ALL INSTRUCTIONS.
Carefully read, understand, and follow all information in
this user manual before installing and using the spa.
These warnings, instructions, and safety guidelines
address some common risks of water recreation, but
they cannot cover all risks and dangers in all cases.
Always use caution, common sense, and good
judgment when enjoying any water activity. Retain this
information for future use. In addition, the following
information can be supplied depending on the spa type.
Keep these instructions in a safe place. If instructions
are missing, please contact the manufacturer or search it
on the website www.bestwaycorp.com.
WARNINGS – SAFETY INSTALLATION
• The spa must be supplied through an isolating transformer
or supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30mA.
• The spa must be supplied by an earthed power source.
• The power source on the wall of building should be more
than 4m away from the pool.
• The spa must be connected to a grounded mains supply
socket with a supply cord fitted with a plug and PRCD with
a tripping current of 10mA.
• The SPA must only be plugged directly into an earthed
socket-outlet of the fixed wiring.
• It is necessary to have the plug accessible after installation
of the spa.
• Electric installations should follow national wiring rules,
consult a qualified electrician with any questions.
• Do not bury cord. Locate cord to minimize abuse from
lawnmowers, hedge trimmers, and other equipment
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
• Read the instructions before using the appliance and
installation or reassembly every time.
WARNINGS- RISK OF ELECTRIC SHOCK
TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA
WHEN IT IS RAINING,THUNDERING OR LIGHTNING.
• Don't use extension cord to connect unit to electric supply;
provide a properly located outlet.
• Don’t plug or unplug the appliance if your hand is wet.
• Never operate any electrical appliance when in your spa or
when your body is wet. Never place any electric appliance,
such as a light, telephone, radio, or television, within 2m of
the spa.
• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the bath
during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don’t
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS- TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
reduced to under 40°C (104°F). When using an external
thermometer, the temperature showed on the control panel
and the external thermometer may be different. The
difference should be around 3 degrees. This situation is
normal due to the different location where the two
instruments read the temperature.
• The use of alcohol, drugs, or medication before or during
spa use may lead to unconsciousness with the possibility of
drowning.
• Obese people and people with a history of heart disease,
low or high blood pressure, circulatory system problems, or
diabetes should consult a physician before using a spa.
• People using medication should consult a physician before
using a spa since some medication may induce drowsiness
while other medication may affect heart rate, blood
pressure, and circulation.
Avoid putting your head under the water at all times.
Avoid swallowing spa water.
• Consider that the comfortable temperature range during use
may be lower than the maximum safe temperature.
• Never operate the spa if inlet/outlet pipes are broken or
missing. Never attempt to replace the inlet/outlet pipes. Visit
our website www.bestwaycorp.com to get the necessary
information.
Never pour water with a temperature higher than 40°C (104°F)
into the spa pool directly.
• Do not use the spa alone.
• People with infectious diseases should not use a spa.
• Do not use the spa immediately following strenuous
exercise.
• Immediately leave the spa if you feel uncomfortable or
sleepy.
Always enter and exit the spa slowly and cautiously. Wet
surfaces are slippery.
• The pump must be tested before each use. To test, follow
the instructions of pump.
Always keep plug dry, plug in with wet plug is definitely
forbidden.
Always unplug the appliance:
- Before cleaning or other maintenance.
- If leaving it unattended on holidays.
• Never wear your contact lenses when in your spa.
DANGER - Risk of Injury. The suction fittings in this spa are
sized to match the specific water flow created by the pump.
Should the need arise to replace the suction fittings or the
pump, be sure that the flow rates are compatible. Never
operate the spa if the suction fittings are broken or missing.
Never replace a suction fitting with one rated less than the
flow rate marked on the original suction fitting.
CAUTION: After using your spa for 3-5 years, to ensure the
safety and performance of the spa, the main components,
such as the heating element, air blower motor and non-return
valves have to be checked by a professional electrician. If the
electrician finds problems during the inspection, visit our
website www.bestwaycorp.com to get the necessary
information.
WARNINGS – NON-SWIMMERS SAFETY
• Continuous, active, and vigilant supervision of weak
swimmers and non-swimmers especially in exercise spas,
by a competent adult is required at all times (remembering
that children under five years of age are at the highest risk
of drowning).
• Designate a competent adult to supervise the spa each time
it is being used.
• Weak swimmers or non-swimmers should wear personal
protection equipment, especially when using the exercise
spa.
• When the spa is not in use, or unsupervised, remove all
toys from the spa and its surrounding area to avoid
attracting children to the spa.
WARNINGS – SAFETY DEVICES AND EQUIPMENT
A safety cover or other safety protection device shall be
used, or all doors and windows (where applicable) shall be
secured to prevent unauthorized access to the spa.
• Barriers, covers, alarms, or similar safety devices are
helpful aids, but they are not substitutes for continuous and
competent adult supervision.
• It is recommended to keep rescue equipment (e.g. a ring
buoy) by the spa (if appropriate).
• Keep a working phone and a list of emergency phone
numbers near the spa.
• It is recommended to consult experts and/or local
authorities to apply local or national laws/regulations
relating to childproof fencing, safety barriers, lighting, and
other safety requirements.
WARNINGS – SAFE USE OF THE SPA
• Encourage all users especially children to learn how to
swim.
• Learn Basic Life Support (Cardiopulmonary Resuscitation
-CPR) and refresh this knowledge regularly. This can make
a life-saving difference in the event of an emergency.
• Instruct all spa users, including children, what to do in case
of an emergency.
• Never dive into any shallow body of water. This can lead to
serious injury or death.
• Do not use the spa when using alcohol or medication that
may impair the bather's ability to safely use the spa.
• When covers are used, remove them completely from the
water surface before entering the spa.
• Protect spa occupants from water related illnesses by
advising them to keep water treated and practicing good
hygiene. Consult the water treatment guidelines in the
user's manual.
• Store chemicals out of the reach of children.
• Use the signage provided on the spa or within 2 meters of
the spa in a prominent visible position.
• Removable ladders, when removed, shall be stored safely
where children cannot climb on it.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• Water attracts children; always attach a spa cover after
each use.
DANGER - Risk of Accidental Drowning (especially children
under 5 years). Caution shall be exercised to prevent
unauthorized access to the spa by children. This can be
reached by adult supervisor securing the means of access or
installing a safety protection device to the spa. To avoid
accidents during spa use, ensure that children are kept under
constant adult supervision.
WARNINGS - SAFE WATER MAINTENANCE AND
CHEMICAL USE
• Never add water to chemicals. Always add chemicals to
water to avoid strong fumes or violent reactions that may
result in hazardous chemical spray.
• Regarding the information pertaining to cleaning,
maintenance of water, and disposal of water, please see the
"MAINTENANCE" section.
• Do not use spa during chemical maintenance.
Any manual dosing of chemicals shall not be performed
while bathers are present in the spa.
• Consult your local government authority for water
regulations related to convenient water supply for filling the
spa.
WARNINGS - SAFE SETUP AND STORAGE
• We strongly recommend not to unfolding and inflating the
spa if the ambient temperature is below 15°C (59°F). We
suggest inflating the spa indoors, and then continuing to
setup outdoors. If the outdoor temperature is lower than 6°C
(42.8°F), the spa heater must always be on. In this mode,
the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and10°C (50°F) to
prevent damage, such as water freezing in the pipes or the
circulation system.
CAUTION: If alarms pop up on the spa, the Freeze Shield™
system will stop working. Be sure to check the status of your
spa if the outdoor temperature is below 6°C (42.8°F). In case
of a long-term absence from home when there is a risk
of temperatures falling below 6°C (42.8°F), we strongly
suggest disassembling the spa and storing it following the
storage procedure.
• When the appliance will be not used for a long time, such
as in the winter, the spa or pool set should be disassembled
and stored indoors.
• Do not to place the spa on a slippery surface and make
sure the surface is free of sharp objects before installation.
• To avoid damage to the pump, the spa must never be
operated unless the spa is filled with water.
• For safety reasons, only use the accessories provided or
approved by the spa manufacturer.
• Regarding the information pertaining to the installation, refer
to the following paragraph of the manual.
• Whenever the spa is emptied, the filter should be cleaned
(and drained/dried, where applicable).
• Please examine equipment before use. Notify Bestway at
the customer service address listed on this manual for any
damaged or missing parts at the time of purchase. Verify
that the equipment components represent the models that
you had intended to purchase.
• This product is not intended for commercial use.
Always keep the spa cover on to minimize heat loss during
heating of the spa between uses (but not while it is being
used). Ensure the cover is fitted tightly, as per instructions
to maximize insulation. It shall be recommended that the
cover, when not in use, should be kept off the ground to
retain its cleanliness (particularly the surface in close
proximity to the water spa water surface). The cover should
be stored in an appropriate location, where it cannot be
damaged, or cause damage.
• Check the set water temperature and consider lowering it
for the times when the spa will typically not be in use.
• Depending on external conditions, consider turning off the
heater entirely if not using the spa for an extended period
of time (where the spa provides this option, but still
maintains residual disinfection/pH-values).
• It is recommended to use an insulating ground cloth
underneath the spa to minimize heat loss through the bottom
of the spa.
• Maintain clean filters to preserve appropriate working
conditions for the pump and avoid unnecessary water
replacement and re-heating.
• Keep the spa away from the rest area to minimize noise
disturbance.
• Do not put the cover on the ground or any other dirty surface
when not in place on the spa.
• When the spa is being used, the cover should be placed in a
clean, dry area, otherwise it can pick up dirt and bacteria.
Covers should not be put on wooden tables or wooden
decking because of the risk of bleaching the wood. A cover
lifter, or similar device, is useful for ensuring that the cover
does not come into contact with the ground. A cover lifter is
strongly recommended for spas in rental settings.
• Recommended to ask a qualified contractor or a structural
engineer to verify if the support material is strong enough to
support the maximum design load of the spa, spa water and
bathers. Read the filled weight information on the package.
WARNINGS – ONLY FOR SPA EQUIPPED WITH Wi-Fi
• Transmitter working frequency: 2412~2472MHz
• Transmitter maximum output power:19dBm
WARNINGS - PRCD
• Before inserting plug into a power outlet, make sure the
current rate of the power outlet is suitable for the pump.
• The spa is a class I electrical appliance and must be
connected directly to a grounded socket. It is recommended to
only use a socket which is resistant to humidity and capable of
high-power loading. Regularly check the plug and socket for
signs of damage before using the spa – do not use the spa if
the plug or socket is damaged. If you are unsure about the
quality of the electrical supply, please consult a qualified
electrician before use.
• The PRCD plug must be tested before each use to avoid risk
of electric shock.
• Do not use the pump if this test fails. For assistance, please
visit the support section on our website,
www.bestwaycorp.com.
SAVE THESE INSTRUCTIONS
PRE-SETUP
CHECK LIST
To check the parts printed on the package, verify that the
equipment components represent the model that you had
intended to purchase. In case of any damaged or missing
parts at the time of purchase, visit our website
bestwaycorp.com/support.
CHOOSE THE CORRECT LOCATION
Indoor and outdoor & above ground & portable wiring &
portable spa.
Only For Spas Equipped With Wi-Fi:
To choose the correct location for the spa equipped with Wi-Fi,
read the Spa Wi-Fi instruction leaflet included in the package
and the following instructions.
For All Spas:
The surface chosen to install the pool must respect the
following technical characteristics.
• Because of the combined weight of the water inside the spa
and the users, it is extremely important that the surface
chosen to install the spa is capable of uniformly supporting
the total weight for the entire time the spa is installed.
• An adequate drainage system has to be provided to deal with
overflow water for both indoor and outdoor installations.
During filling, draining or when in use, water may flow out of
the spa.
• The surface must be flat and smooth. If the surface is
inclined or uneven, it can create an unbalanced loading on
the structure of the spa. This situation can damage the
welding point.
• The selected surface must be clear of any type of object.
Due to the weight of the water, any object under the spa
could damage or perforate the bottom of the spa.
• The selected location must not have overhead power lines or
trees. Be sure the location does not contain underground
12
utility pipes, lines or cables of any kind.
• The selected position must be far from the house entrance.
Do not position any equipment or other furniture around the
spa. The water that comes out of the spa during the use or
due to a faulty product can damage the furniture inside the
house or surrounding the pool.
• Do not to install the spa on carpet or other floor materials
(e.g. untreated cork, timber or other porous materials) that
promote or harbor moisture and bacteria, or that could be
affected by water treatment chemicals used in the spa.
• Consult your local government authority for installation
regulations.
Suggested set-up surfaces: grass, ground, concrete, and all
other surfaces that respect the above set-up conditions.
Not suggested surfaces: mud, sand, gravel, deck, balcony,
driveway, platform, soft/loose soil or other surface that does
not meet the above set-up conditions.
Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
• Humidity is a natural side effect with Lay-Z-Spa installation.
Determine the effects of airborne moisture on exposed wood,
paper, etc. in the proposed location. To minimize these
effects, it is strongly recommended to provide plenty of
ventilation to the selected area. Consult an expert to
determine if more ventilation is needed.
• Keep suitable air treatment in the indoor location (ventilation
and dehumidification) regularly to preserve the bathers’
safety and comfort.
• Empty the spa before removing it from the indoor location or
building.
Outdoor Installation:
• The selected surface must be clear of aggressive plants and
weed species. Those types of strong vegetation could grow
through the liner and create water or air leakage. The grass
or other vegetation that may cause odor or slime to develop
have to be eliminated from the set-up location.
• Do not leave the spa's surface exposed to direct sunlight for
long periods of time. We recommend protecting the spa from
direct sun light exposure by a cover when not in use.
• Follow the important instructions above to choose the correct
surface and location to set up your spa. Damaged parts of
the spa, due to the fact that the set-up surface and location
does not match the instructions, will not be considered as
manufacture defect and will avoid the warranty and any
service claims. It is the responsibility of the owner to ensure
the site meets the requirements at all times.
• Consult your local professional installers for environmental
conditions, such as ground water and risk of frost.
SPA HEATER EQUIPOTENTIAL BONDING TERMINAL
• It is recommended to arrange for a qualified electrician to
connect the spa pump to an equipotential bonding terminal
using a minimum 2.5mm
2
solid copper conductor.
CHECK LIST
To check the parts printed on the package, verify that the
equipment components represent the model that you had
intended to purchase. In case of any damaged or missing
parts at the time of purchase, visit our website
bestwaycorp.com/support.
CHOOSE THE CORRECT LOCATION
Indoor and outdoor & above ground & portable wiring &
portable spa.
Only For Spas Equipped With Wi-Fi:
To choose the correct location for the spa equipped with Wi-Fi,
read the Spa Wi-Fi instruction leaflet included in the package
and the following instructions.
For All Spas:
The surface chosen to install the pool must respect the
following technical characteristics.
• Because of the combined weight of the water inside the spa
and the users, it is extremely important that the surface
chosen to install the spa is capable of uniformly supporting
the total weight for the entire time the spa is installed.
• An adequate drainage system has to be provided to deal with
overflow water for both indoor and outdoor installations.
During filling, draining or when in use, water may flow out of
the spa.
• The surface must be flat and smooth. If the surface is
inclined or uneven, it can create an unbalanced loading on
the structure of the spa. This situation can damage the
welding point.
• The selected surface must be clear of any type of object.
Due to the weight of the water, any object under the spa
could damage or perforate the bottom of the spa.
• The selected location must not have overhead power lines or
trees. Be sure the location does not contain underground
13
utility pipes, lines or cables of any kind.
• The selected position must be far from the house entrance.
Do not position any equipment or other furniture around the
spa. The water that comes out of the spa during the use or
due to a faulty product can damage the furniture inside the
house or surrounding the pool.
• Do not to install the spa on carpet or other floor materials
(e.g. untreated cork, timber or other porous materials) that
promote or harbor moisture and bacteria, or that could be
affected by water treatment chemicals used in the spa.
• Consult your local government authority for installation
regulations.
Suggested set-up surfaces: grass, ground, concrete, and all
other surfaces that respect the above set-up conditions.
Not suggested surfaces: mud, sand, gravel, deck, balcony,
driveway, platform, soft/loose soil or other surface that does
not meet the above set-up conditions.
Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
• Humidity is a natural side effect with Lay-Z-Spa installation.
Determine the effects of airborne moisture on exposed wood,
paper, etc. in the proposed location. To minimize these
effects, it is strongly recommended to provide plenty of
ventilation to the selected area. Consult an expert to
determine if more ventilation is needed.
• Keep suitable air treatment in the indoor location (ventilation
and dehumidification) regularly to preserve the bathers’
safety and comfort.
• Empty the spa before removing it from the indoor location or
building.
Outdoor Installation:
• The selected surface must be clear of aggressive plants and
weed species. Those types of strong vegetation could grow
through the liner and create water or air leakage. The grass
or other vegetation that may cause odor or slime to develop
have to be eliminated from the set-up location.
• Do not leave the spa's surface exposed to direct sunlight for
long periods of time. We recommend protecting the spa from
direct sun light exposure by a cover when not in use.
• Follow the important instructions above to choose the correct
surface and location to set up your spa. Damaged parts of
the spa, due to the fact that the set-up surface and location
does not match the instructions, will not be considered as
manufacture defect and will avoid the warranty and any
service claims. It is the responsibility of the owner to ensure
the site meets the requirements at all times.
• Consult your local professional installers for environmental
conditions, such as ground water and risk of frost.
SPA HEATER EQUIPOTENTIAL BONDING TERMINAL
• It is recommended to arrange for a qualified electrician to
connect the spa pump to an equipotential bonding terminal
using a minimum 2.5mm
2
solid copper conductor.
CHECK LIST
To check the parts printed on the package, verify that the
equipment components represent the model that you had
intended to purchase. In case of any damaged or missing
parts at the time of purchase, visit our website
bestwaycorp.com/support.
CHOOSE THE CORRECT LOCATION
Indoor and outdoor & above ground & portable wiring &
portable spa.
Only For Spas Equipped With Wi-Fi:
To choose the correct location for the spa equipped with Wi-Fi,
read the Spa Wi-Fi instruction leaflet included in the package
and the following instructions.
For All Spas:
The surface chosen to install the pool must respect the
following technical characteristics.
• Because of the combined weight of the water inside the spa
and the users, it is extremely important that the surface
chosen to install the spa is capable of uniformly supporting
the total weight for the entire time the spa is installed.
• An adequate drainage system has to be provided to deal with
overflow water for both indoor and outdoor installations.
During filling, draining or when in use, water may flow out of
the spa.
• The surface must be flat and smooth. If the surface is
inclined or uneven, it can create an unbalanced loading on
the structure of the spa. This situation can damage the
welding point.
• The selected surface must be clear of any type of object.
Due to the weight of the water, any object under the spa
could damage or perforate the bottom of the spa.
• The selected location must not have overhead power lines or
trees. Be sure the location does not contain underground
14
utility pipes, lines or cables of any kind.
• The selected position must be far from the house entrance.
Do not position any equipment or other furniture around the
spa. The water that comes out of the spa during the use or
due to a faulty product can damage the furniture inside the
house or surrounding the pool.
• Do not to install the spa on carpet or other floor materials
(e.g. untreated cork, timber or other porous materials) that
promote or harbor moisture and bacteria, or that could be
affected by water treatment chemicals used in the spa.
• Consult your local government authority for installation
regulations.
Suggested set-up surfaces: grass, ground, concrete, and all
other surfaces that respect the above set-up conditions.
Not suggested surfaces: mud, sand, gravel, deck, balcony,
driveway, platform, soft/loose soil or other surface that does
not meet the above set-up conditions.
Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
• Humidity is a natural side effect with Lay-Z-Spa installation.
Determine the effects of airborne moisture on exposed wood,
paper, etc. in the proposed location. To minimize these
effects, it is strongly recommended to provide plenty of
ventilation to the selected area. Consult an expert to
determine if more ventilation is needed.
• Keep suitable air treatment in the indoor location (ventilation
and dehumidification) regularly to preserve the bathers’
safety and comfort.
• Empty the spa before removing it from the indoor location or
building.
Outdoor Installation:
• The selected surface must be clear of aggressive plants and
weed species. Those types of strong vegetation could grow
through the liner and create water or air leakage. The grass
or other vegetation that may cause odor or slime to develop
have to be eliminated from the set-up location.
• Do not leave the spa's surface exposed to direct sunlight for
long periods of time. We recommend protecting the spa from
direct sun light exposure by a cover when not in use.
• Follow the important instructions above to choose the correct
surface and location to set up your spa. Damaged parts of
the spa, due to the fact that the set-up surface and location
does not match the instructions, will not be considered as
manufacture defect and will avoid the warranty and any
service claims. It is the responsibility of the owner to ensure
the site meets the requirements at all times.
• Consult your local professional installers for environmental
conditions, such as ground water and risk of frost.
SPA HEATER EQUIPOTENTIAL BONDING TERMINAL
• It is recommended to arrange for a qualified electrician to
connect the spa pump to an equipotential bonding terminal
using a minimum 2.5mm
2
solid copper conductor.
LOCK/UNLOCK BUTTON: The pump has a 5-minute auto-lock, this light will turn on. To lock or unlock the pump, press the lock/unlock
button for 2 seconds.
MASSAGE SYSTEM BUTTON:Press button to activate the massage system, which has a 30-minute auto-shutoff feature.
The light of the button becomes red when activated.
Do not run the massage system when the cover is attached, air can accumulate inside the spa and cause irreparable damage
to the cover. Heat and massage system can be activated at the same time.
FOR SPA EQUIPPED WITH Wi-Fi ONLY
2-LEVEL MASSAGE REGULATION: Push once for the full power massage; the display will show L1. Push it again for a lower power
massage; the display will show L2. Push it a third time to shut the massage function off.
When inflating the spa liner, make sure that the massage function is running at full power.
Press the button and the LED starts to flash.
Press the or button to adjust the heating duration (From 1-999 hours).
Press the button again to confirm the heating duration.
After setting the heating duration, the LED starts to flash.
Press the or button to set the time (From 0-999 hours). This setting defines the waiting hours before the activation of the heating
function. If the timer is set to 0 hour, the heating system will activate immediately.
Press button again or simply touch nothing for 10 seconds to confirm the setting. The LED will light steadily, and the countdown to
heater activation will begin. The screen flashes the current temperature and time alternately.
To modify the timer settings: Press the button and use the or button to adjust.
Cancel the setting: Press the button for 2 seconds.
When the power saving function is activated, all other functions (massage, filtration) except the heating can be used.
The POWER-SAVING function in not an automatic function: after one complete cycle (waiting time plus heating function), this function
must set again.
POWER-SAVING TIMER BUTTON: Designed to help avoid wasting power by setting the time and duration of the heating cycle for the spa.
follow these steps to activate the POWER-SAVING function.
HEAT BUTTON:Press button to activate the heating system. When the light of the button is red, the heating system is activated.
When the light is green, the water reached the set temperature.
If the heating system is activated, the filtration system will automatically start.
After turning off the heating system, the filtration system will continue to operate.
RECOMMENDATIONS DURING THE INSTALLATION
• Use of an extension cord or multi-plug adaptor with the spa heater is dangerous and can cause the plug to overheat, causing damage to the equipment
and surrounding items.
• Keep the spa away from the rest area to minimize noise disturbance.
• Keep at least 1m clearance around the spa.
• We don't recommend using sea water to fill the pool. Sea water can corrode the internal metal components due to the high concentration of salt.
• The filtration system of the spa is designed to be used only with the filter cartridge. Any other component added inside the filter set can cause damage
to the filtration system of the spa. This will not be covered by customer service.
INFLATION INFORMATION
Only For Inflatable Spa Liner or Inflatable Cover:
• When inflating, you will notice that air will be expelled from the area where the air hose connects to the pump, this is
normal for technique requirements.
• Don't cover the holes on the base of the inflation hose, the inflation hose is designed to inflate the spa to the correct
pressure. This operation will over inflate the liner and damage the structure.
• Do not use an air compressor to inflate the spa.
• Do not drag the pool on rough ground as this may cause damage to the spa liner. Inflation time for reference only.
HAND PUMP PRESSURE GAUGE
Only For Fortifiber Spa:
• The air pressure gauge of the hand pump only shows the air pressure higher than
5 psi, which is normal. When the air pressure in the product is lower than 5 psi, the air pressure gauge will not show a value.
AIR VALVE CHECK
Only For Fortifiber Spa
• If the air valve is loose, use the provided wrench to fasten the air valve following these steps: With one hand, hold the backside of the air valve from the
inner side of the spa wall and turn the wrench clockwise.
• Do not adjust the air valve connector when the spa is in use.
USING THE SPA
CONTROL PANEL AIRJET AIRJET WITH Wi-Fi
For the installation instructions, follow the drawings printed on the package. Drawings are for illustration purposes only. May
not reflect actual product. Not to scale.
15
INSTALLATION
TEMPERATURE ADJUSTMENT BUTTONS:Pressing
the or button, the display starts to flash showing
the set temperature for 3 seconds, after that it will show
again to the real water temperature. When it is flashing you
can adjust the temperature using the or button.
The default temperature is 35°C (95°F).
Temperature adjustment ranges from 20°C (68°F) to
40°C (104°F).
ON/OFF BUTTON:After activating the PRCD, press and
hold the button for 2 seconds. The button turns
to green and the control panel is activated. Press and
hold button for 2 seconds to turn off all currently
activated functions.
CELSIUS/FAHRENHEIT TOGGLE:The temperature
can be displayed in either Fahrenheit or Celsius.
WATER FILTER BUTTON:The button turns the filter
pump on and off. The button turns to red when
activated.
FOR SPA EQUIPPED WITH Wi-Fi ONLY
Wi-Fi ACTIVATION:For the Wi-Fi operation instruction,
read the spa Wi-Fi instruction leaflet included in the
package.
The WATER HEATER rate may change in the conditions below:
• When the outdoor temperature is below 15°C (59°F).
• If the cover is not in position. Always keep the spa cover on when the spa is not in use; it avoids dust contaminating the water and it minimizes heat
loss.
• The water temperature shown on the display may not be correct, if the filtration system is not activated. To read the correct water temperature on the
display, run the filtration system for at least a minute.
• The water temperature as tested by an external thermometer may vary from the temperature as displayed on the spa panel by as much as
approximately 2°C (35.6°F).
WINTER USE INSTRUCTIONS
HEATING TIME
• To reach 40°C (104°F), the heating duration required is based on the starting water temperature and ambient temperature, the data below is purely for
reference. To display the current water temperature, run the filter system for at least a minute.
• Be sure to cover the spa with the spa cover whenever the heating function is activated. Leaving the spa uncovered
will increase the heating duration required. When the spa is assembled with water, do not switch off the spa heater if
the temperature is lower than 6ºC (42.8°F).
16
SPA HEATER SPECIFICATION
Ambient Temperature
10ºC (50ºF)
15ºC (59ºF)
20ºC (68ºF)
25ºC (77ºF)
30ºC (86ºF)
Water Temperature
10ºC (50ºF)
15ºC (59ºF)
20ºC (68ºF)
25ºC (77ºF)
30ºC (86ºF)
Set Temperature
40ºC (104ºF)
40ºC (104ºF)
40ºC (104ºF)
40ºC (104ºF)
40ºC (104ºF)
Heating Duration
16-24h
12-20h
10-18h
8-12h
5-8h
Power Rate Massage Tube Power Heat Element Power Water Pump Power
2,000W at 20ºC 50W
220-240V AC, 50Hz,
Single Phase 2,050W at 20ºC 800W
It is important to follow these suggestions if you are setting up the spa during the winter period. This will prevent any damage to the spa
heater and material of the liner, extending the life of your product drastically.
• If the outdoor temperature is below 10°C (50°F), to avoid any damage to spa liner, keep the package indoors where the temperature is above
15°C (59°F). This will make the spa liner more flexible and easier to set up.
• Open the package and inflate the spa liner using the spa heater in a room where the temperature is above 15°C (59°F).
• Position the spa liner outdoors in the desired position, then connect the spa heater and fill with water. The water temperature used to fill the spa must be
above 6°C (42.8°F), otherwise when you begin to operate with the spa heater, the E03 alarm will appear.
• You can keep the spa on during winter when the temperature is lower than 6°C (42.8°F). The Freeze Shield™ system automatically keeps the water
temperature between 6°C (42.8°F) and 10°C (50°F), and it will prevent the water from freezing.
• If the water temperature is below 6°C (42.8°F), the spa heater must always be on. In this mode, the Freeze Shield™ system can keep the internal
temperature between 6°C (42.8°F) and 10°C (50°F) to prevent damage, such as water freezing in the pipes or the circulation system.
• If any alarms appear on the display, the Freeze Shield™ system isn’t working. Be sure to check the status of your spa if the outdoor temperature is
below 6°C (42.8°F). In case of a long-term absence from home when there is a risk of temperatures falling below 6°C (42.8°F), we strongly suggest
disassembling the spa and storing it following the storage procedure.
• Any damage as a result of using the spa in these conditions is the responsibility of the customer. Do not use the spa when the ambient temperature
reaches -10°C (14°F).
DISASSEMBLY AND STORAGE
CAUTION: You must ensure the pump is unplugged before beginning spa maintenance to avoid risk of injury or death.
LINER
• It is normal that your spa liner may appear as if it is losing air. Changes in ambient temperature may change the internal air pressure in the liner.
• When detaching the pump from the liner, to avoid water coming out from the pipes, block the air pipe by screwing on the cap and installing the stoppers
on the debris screens.
COVER
• The cover shall be cleaned inside and outside periodically, using a gentle detergent for the PVC material.
FILTER CARTRIDGE
• To optimize the performance of the filtration system, check and clean your filter cartridge every day.
• We recommend changing your filter cartridge every week or replacing it if after washing, the filter cartridge remains soiled and discolored.
WATER
Many pollutants in the water settle on surfaces below the water line. These pollutants can cause bacterial, algal or fungal growth. It is recommended that
spas are cleaned as regularly as necessary. After a time, tenacious stains or biofilms may develop on the accessible surfaces below the water line or high
concentrations of salts or unwanted reaction by-products may also occur. Depending on hygienic condition, cleanliness, visibility, odour, debris and
stains, it is recommended to change the water completely and clean/disinfect the spa. When emptying the spa, the regulations and the instructions for
draining the water shall be observed.
• Keeping your spa water clean and chemically balanced is necessary. Simply cleaning the filter cartridge is not enough for proper maintenance, we
recommend using pool chemicals to maintain water chemistry and chlorine or bromine tablets (do not use granules) with the chemical dispenser.
• Water quality will be directly related to frequency of use, number of users and overall maintenance of the spa. The water should be changed every
3 days if there is no chemical treatment being performed with the water. It is highly recommended to use tap water for spa filling to minimize the
influence of unwanted contents, such as minerals.
• We recommend you take a shower before using your Lay-Z-Spa, as cosmetic products, lotions, and other residues on the skin can quickly degrade
water quality.
• Don't throw chemical products directly in the water; the chemical will deposit on the bottom of the spa and damage the material and discolor the PVC.
Chemical Tablets (Not Included):
• Remove the chemical dispenser from spa when the spa is in use.
• After performing chemical maintenance and before using the spa, use a test kit (not included) to test the water chemistry. We recommend maintaining
your water chemical balance as the following:
• Spa damage resulting from misuse of chemicals and mismanagement of spa water is not covered by the warranty.
• Pool chemicals are potentially toxic and should be handled with care. There are serious health risks from chemical vapors and the incorrect labeling and
storage of chemical containers.
• Please consult your local pool or chemical supply retailer for more information about chemical maintenance. Pay close attention to the chemical
manufacturer’s instructions.
• Over usage of chemicals will discolor the printing and all points of the spa material; in the worst case, it will damage the structure of the spa liner.
DRAINING
• To drain the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product. Not to scale.
DRYING
• After draining the spa, some water remains inside the spa pump, liner chamber, massage chain and inflatable cover. Make sure that all above parts of
spa are completely dry. This is essential to extend the life of the spa and to avoid creation of mildew.
• The water inside the liner chamber and the inflatable cover come from the humidity in the air used to inflate them. The quantity of water may vary
depending on the percentage of humidity in your area.
• To dry the different parts of the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product.
Not to scale.
CLEANING
• Detergent residues and dissolved solids from bathing suits and chemicals may build up on the spa walls. Use soap and water to clean the walls and
rinse thoroughly. Do not use hard brushes or abrasive cleaners.
DEFLATING
Only For Inflatable Spas:
• Your spa is equipped with a deflation function to remove all the air from inside the chamber to make it easier to pack and store.
• To deflate the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product. Not to scale.
REPAIRING
For PVC Material
If the spa is torn or punctured, use the provided PVC repair patch and follow the below steps:
• Clean the area to be repaired. Carefully peel patch.
• Press patch over the area to be repaired.
• Wait 30 seconds before inflation.
For DuraplusTM PVC Material:
If the spa is torn or punctured, use the provided PVC patch and glue (not included) and follow the below steps:
• Clean and dry the area to be repaired.
• Cut the provided PVC patch to appropriate size.
• Use glue (not included) to coat the one side of the newly cut patch. Make sure the glue is evenly distributed. Wait for 30 seconds and then place the cut
patch with glue over the damaged area.
• Smooth out any bubbles of air that may be trapped underneath, and press firmly for two minutes.
• Wait 30 minutes before inflation.
STORAGE
• Remove all accessories and make sure that spa liner, inflatable cover, pump and accessories are completely clean and dry before storing. If spa is not
completely dry, mold may result and will damage the spa liner during the storage period.
• Fold the spa liner only if the environment temperature is above 10ºC (50ºF). If spa is not completely dry, mold may result and will damage the pool liner.
• Store the spa in a dry place with a moderate temperature between 10ºC (50ºF) and 38ºC (100ºF).
• We strongly recommend positioning the spa liner and inflatable cover inside a carton box, to better protect the PVC material during winter months.
17
MAINTENANCE
pH
7.4-7.6
Total Alkalinity
80-120ppm
Free Chlorine
2-4ppm
Problems
Pump does not operate
Pump does not
heat properly with lid
Massage System
does not work
Pump adapters are not
level with the spa
adapters
Spa pool air leakage
Water is not clean
Probable Causes
- Spa is torn or punctured
- Air valve is loose
Solutions
- Check power source
- For assistance, please visit the support section on our website,
www.bestwaycorp.com
- Power failure
- Power circuits is broken
- Air pump is overheating
- The massage stops automatically
after 30 minutes
- Air pump is broken
- Elevate the pump with wood or another type of insulated material to
bring the pump's adapters level with the spa's adapters
- One characteristic of material is that it
changes shape,which is normal
- Insufficient filtering time
- Dirty filter cartridge
- Improper water maintenance
- Unplug the pump and wait two hours until the pump has cooled. Insert
the plug and press the Massage System Button
- Press the Massage System Button to reactivate
- For assistance, please visit the support section on our website,
www.bestwaycorp.com
- Increase filtration time
- Clean/replace the filter cartridge (refer to Filter Cartridge Cleaning and
Replacement section)
- Refer to the chemical manufacturer’s instructions
- Use provided repair patch
- Using soapy water, cover the air valve to check if air is leaking. If so,
1. Screw valve: fasten the air-valve by tuning the valve clockwise.
2. For Fortifiber SPA: Deflate the spa. With one hand, hold the backside
of the air valve from the inner side of the spa wall and turn the wrench
clockwise.
- Set spa to a higher temperature; refer to pump operation section
- Clean/replace the filter cartridge; refer to section filter cartridge
cleaning and replacement section
- Attach the cover
- For assistance, please visit the support section on our website,
www.bestwaycorp.com
- Temperature set too low
- Dirty filter cartridge
- Spa is not covered with lid
- Heating element failed
18
TROUBLESHOOTING
Problems
The Wi-Fi setup is not
successful
Probable Causes Solutions
The pump has been connected to the
wrong band
If the router your pump is connected to is dual-band and currently not
connecting to a 2.4GHz network, please switch to another band of the
same router (2.4GHz) and try to pair pump heater again. 5GHz networks
are not supported.
The spa pump location is too far from
the router.
Set up with the wrong network name Start the connection procedures again and be sure that the network
name is typed correctly.
The Wi-Fi password used
during the connection is wrong
Start the connection procedures again and be sure that the password is
correct.
The strength of the Wi-Fi signal is not
stable
1. Check that the router works correctly.
2. Go near the spa and check the signal on your phone. If the signal
strength is not stable, check the condition of your router. If the signal
strength is full, repeat the operation to connect the spa to the network.
There is an appliance near the spa
pump or the router that creates signal
interference
The Wi-Fi connectivity can be interrupted by electromagnetic or other
interferences. Keep the appliance away from other electronic devices
that may cause interferences.
Your phone will not connect to the Wi-Fi
network during the registration
Check if the mobile device is in airplane mode.
Make sure to have the airplane mode deactivated when connecting to
the Wi-Fi network.
APP Feedback Consult the help section in the APP for extensive and up-to-date
troubleshooting tips.
Check with your cell phone to see if there is full Wi-Fi signal.In case the
strength of the signal on your phone is too low, check where the strength
of the Wi-Fi signal is full and place the spa in that position.
Indicator light is on
Indicator light flashes quickly
Indicator light is off
Indicator light flashes slowly
Connected to the router
Lost Wi-Fi signal
Light damaged / Wi-Fi module has
problem
Waiting to connect to the router
The pump already connected to your phone
Check the status of your router. The spa lost the Wi-Fi signal.
For more information, please visit the support section on our website,
www.bestwaycorp.com.
The pump is ready to connect to your phone
Wi-Fi LED Status
19
ONLY FOR SPA EQUIPPED WITH Wi-Fi
1. Unplug the plug gently, strike the side of the pump but not violently, and plug it
back in.
2. For assistance, please visit the support section on our website,
www.bestwaycorp.com.
CAUSES REASONS SOLUTIONS
The water flow sensors work without
pressing the filter or heat button.
1. The water flow sensor flags didn’t fall back into the
correct position.
2. The water flow sensors are broken.
After starting or during the
functions of filtering or/and
heating, the water flow sensors do
not detect water flow.
1. You forgot to remove the 2 stopper caps from
inside the pool.
2. Filter cartridges are dirty.
3. Activate the filter or heat system and put your
hand in front of the outlet pipe inside the pool to
check if you can feel water flowing out.
a. If no water flows out the water pump is broken.
b. Water flows out but the alarm appears,
the water flow sensors are broken.
4. Filter blockage
5. Bent pipes or poor water flow through the plastic
pipes of the liner
6. Debris screens are blocked: Debris screens can
become blocked by hard water due to calcium
build-up.
7. Perished washers
The washers within the spa couplings may have
become perished or worn.
1. Remove the 2 stopper caps before heating. Refer to the Assembly section in
the User’s Manual.
2. Remove the filter set from inside the pool and push the filter or heat button. If
no alarm appears, clean or change the filter cartridges installed inside the pool.
3. For assistance, please visit the support section on our website,
www.bestwaycorp.com.
4. Clean the filter and check for damage. Replace or re-install as necessary. For
assistance, please visit the support section on our website,
www.bestwaycorp.com.
5. Please check through the spa connection to see if the pipes are bending. For
assistance, please visit the support section on our website,
www.bestwaycorp.com.
6. Empty the spa and place a garden hose inside the pipes to wash the debris. To
be sure all debris are removed, perform the operation from the outside and
inside of the spa.
Use a toothbrush to remove any stubborn debris.
For assistance, please visit the support section on our website,
www.bestwaycorp.com.
7. Check the washers inside the coupling for damage. Unscrew the couplings and
remove the washer for further inspection.
For assistance, please visit the support section on our website,
www.bestwaycorp.com.
The pump’s thermometer reads the
water temperature below
4°C (40°F).
1. The water temperature is lower than 4°C (40°F)
2. If the water temperature is higher than 7°C (44.6°F),
the pump’s thermometer is broken.
1. The spa is not designed to operate with water temperatures lower than 4ºC
(40°F). Unplug the pump and only re-start the pump when the water
temperature reaches 6°C (43°F).
2. For assistance, please visit the support section on our website,
www.bestwaycorp.com.
The pump’s
thermometer reads the water
temperature over 50°C (122°F).
1. The water temperature is over 50°C (122°F)
2. The ambient temperature is higher than 40°C (104°F)
or the spa is exposed to direct sunlight for an extended
period of time.
3. If the water temperature is lower than 45°C (113°F),
the pump’s thermometer is broken.
1. The spa is not designed to operate with water temperatures greater than
40°C (104°F). Unplug the pump and only re-start the pump when the water
temperature reaches 38°C (100°F) or lower.
2. Disconnect the plug, detach the pump and drain the spa. After 15 minutes,
reattach the pump, reconnect the plug and restart the heating function. If the
alarm appears again, consider moving the spa to another location without
direct sunlight.
3. For assistance, please visit the support section on our website,
www.bestwaycorp.com.
The pump’s thermometer
connection has issues.
1.The connection between the temperature sensor and
the PCB may have an issue.
1.Unplug the spa , wait 5 minutes, and then plug it back in while switching the
pump on.
2.If the alarm appears again, please visit the support section on our website,
www.bestwaycorp.com.
The pump’s thermometer reads the water
temperature over 52°C (125.6°F).
1. The water temperature is over 52°C (125.6°F)
2. The ambient temperature is higher than 40°C (104°F)
or the spa is exposed to direct sunlight for an extended
period of time.
3. If the water temperature is lower than 45°C (113°F),
the pump’s thermometer is broken.
1. The spa is not designed to operate with water temperatures greater than 40°C
(104°F). Unplug the pump and only re-start the pump when the water temperature
reaches 38°C (100°F) or lower.
2. Disconnect the plug, detach the pump and drain the spa. After 15 minutes, reattach
the pump, reconnect the plug and restart the heating function. If the alarm appears
again, consider moving the spa to another location without direct sunlight.
3. For assistance, please visit the support section on our website, www.bestwaycorp.com.
Ground connection failed.
1. The ground system of the wall socket where
the spa is connecte has a problem.
2. The pump has a problem.
1. Connect the spa pump to a new socket or call an electrician to check
the wall socket. If the problem continues, we suggest creating an
independent grounding connection to the wall socket.
2. For assistance, please visit the support section on our
website,www.bestwaycorp.com.
Wi-Fi module is damaged For assistance, please visit the support section on our website,
www.bestwaycorp.com.
NOTE: Press any button to remove alarm and continue to use the spa.
Wi-Fi module connection failed.
1. The pump has detected electric through the
ground wire. An appliance in your home have
an electric leak.
2. The pump has a problem.
1. Call an electrician immediately to understand if power is flowing inside the
grounding connection. If the problem continues, to use your spa safely, we strongly
recommend connecting the spa plug to a socket with independent grounding.
2. For assistance, please visit the support section on our website,
www.bestwaycorp.com.
Detected electric from ground wire.
ERROR CODES
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252

Bestway Lay-Z-Spa Le manuel du propriétaire

Taper
Le manuel du propriétaire