CARE AND MAINTENANCE
TECHNICAL DATA
This product is fitted with one E14 (EU) or one E12
(US) bulb fittings. HAY recommends using this
product with LED bulbs.
Fitting type: E14 (EU) or E12 (US)
Power range: 58W (Max. 8W)
Suggested colour temperature: Warm White.
HAY will not accept any responsibility for any
accidents, injuries or damages that occur due to
the use of incorrect bulbs.
ATTENTION
Ensure that the power supply to the circuit has
clearly been turned OFF before installing the
product. In some countries, electrical installation
must be carried out by authorised electricians/
contractors; please check with your local
authority for guidance.
The product must not be modified in any way.
HAY accepts no responsibility for any products
that have been modified or tampered with. If the
external flexible cable or cord of this luminaire is
damaged, it should be exclusively replaced by a
qualified electrician in order to avoid an electrical
hazard. This lamp is designed for indoor use only.
CARE AND MAINTENANCE
The product can be cleaned with a soft damp
cloth and mild detergent, or a dry microfibre
cloth. Do not use alcohol or any other solvents
to clean the product and avoid using abrasive or
rough sponges. Ensure that the power supply has
been turned OFF before cleaning the product.
ONLY FOR NORTH AMERICAN CUSTOMERS:
IMPORTANT SAFETY INSTRUCTIONS
This product has a polarised plug (one blade
is wider than the other) as a feature to reduce
the risk of electric shock. This plug can only be
inserted in a polarised outlet one way. If the plug
does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician.
Never use with an extension cord unless the plug
can be fully inserted. Do not alter the plug.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Ce produit dispose d’une prise polaire (une lame
est plus large que l’autre) afin de réduire le risque
de choc électrique. Cette fiche ne peut être
installée que dans une direction sur une prise
polaire. Si la prise ne s’insère pas complètement
dans la prise, retournez la prise. Si cela ne
convient toujours pas, contactez un électricien
qualifié. Ne pas utiliser avec une rallonge, sauf si
la fiche peut être correctement insérée. Ne pas
modifier la fiche.