JIECANG JCP35NBLT1 Bluetooth Box Mode d'emploi

Marque
JIECANG
Modèle
JCP35NBLT1 Bluetooth Box
Taper
Mode d'emploi
Bluetooth APP Usage Instruction
1. System Diagram
Figure 1: System of Adjustable Table with Bluetooth APP
2. System Operating Instruction
1.) Installation Instruction of Bluetooth Receiver Box
As shown in Figure1, connect the adjustable table system and insert the
bluetooth receiver box into the six-core crystal socket of control box.
2.) Installation Instruction of Bluetooth APP
Scan the corresponding QR code to download the APP. Support both
IPhone and Android.
3.) Instruction of Bluetooth APP
Please open mobile phone’s blue tooth before using blue tooth APP. The
homepage is disclaimer interface when you enter in APP for the first time.
Please read the statement carefully and select the "agree".
Click "Usage demonstration" to enter the demonstration interface. Users can
master the usage of the APP according to the demo interface. Click "Start to
use" to enter the “Add equipment” interface.
Two methods to find the equipment you need to connect to, click "Search
Equipment" or "Scan QR code" in the receiver box.
Method 1: Click "Search Equipment" to search for the blue tooth equipment
from all the search results. Then choose the blue tooth equipment you need to
connect. Enter the “My equipment” interface. In this interface, select the
equipment that need to be controlled and enter the "Equipment Control"
interface to control the adjustable table.
Method 2: Click "Scan QR code" to enter into the interface. Put the camera on
QR code and automatically search for the blue tooth equipment you need to
connect to. Select it to enter into "My equipment" interface, then choose the
needed control equipment to enter into the "Equipment control" interface to
control the adjustable table.
Click "My QR code" , scan the QR code that needs to be saved, then it will
generate the scanned QR code and save it in the phone.
In the “Equipment Control” interface, the finger drawn up on the screen and
the controlled adjustable table rises, while the finger drawn down on the
screen, the controlled adjustable table will down.
Touch the icon in the interface, then touch the sitting position icon ,
the current height will be saved.
The same way to touch the icon in the interface, then touch the standing
position icon , then the 2nd memory position will be saved.
In “Health Program” interface, it can record the time of users’ sitting position
and standing position. It also can set to remind the user to change the time of
working posture, in order to avoid working too long time under the same
posture, then achieve a healthier office model.
Remarks:
This device complies with Part 15 of the FCC Rules / Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions uivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more
should be maintained between the antenna of this device and persons during device
operation.To ensure compliance, operations at closer than this distance is not
recommended.
Les antennes installées doivent être situées de facon à ce que la population ne puisse
y être exposée à une distance de moin de 20 cm. Installer les antennes de facon à ce
que le personnel ne puisse approcher à 20 cm ou moins de la position centrale de l’
antenne.La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au
moins 20 cm des personnes pendant son functionnement.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

JIECANG JCP35NBLT1 Bluetooth Box Mode d'emploi

Marque
JIECANG
Modèle
JCP35NBLT1 Bluetooth Box
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Autres documents