Summit CLFD24WC Le manuel du propriétaire

Owner’s Manual

Manuel du propriétaire

Built-in Models:

CL24WC2 : 46-Bottle Wine Cooler

CLFD24WC : 42-Bottle Wine Cooler

CL242WBV : Wine Cooler & Beverage Center

CL15WC : 34-Bottle Wine Cooler

BEFORE USE, PLEASE READ AND FOLLOW

ALL SAFETY RULES AND OPERATING INSTRUCTIONS

Write Model &

Serial Number here:

Felix Storch, Inc.

Summit Appliance Division

770 Garrison Avenue

Bronx, NY 10474

www.summitappliance.com

CL151WBV : Wine Cooler & Beverage Center

Table of contents

Safety instructions and warnings ............................................................. 2 –

5

Transportation and unpacking ........................................................................

6

Installation instructions ............................................................................. 6 –

Before installation of your appliance ........................................................ 6

Tools you will need ...................................................................................

7

Installation dimensions (built-in) ......................................................... 7 –

8

Electrical requirements .............................................................................

8

Operation ................................................................................................... – 1

5

Operating conditions ................................................................................

9

Control elements ................................................................................ 9 –

Setting the temperature ...................................................................... 9 –

Functions .................................................................................................

Shelves ..................................................................................................

12

Reversing the door ................................................................................. 13

Wine storage .......................................................................................... 1

5

Storage diagrams ................................................................................... 1

5

Cleaning and care ........................................................................................... 1

6

Cleaning the appliance ........................................................................... 1

6

Moving ................................................................................................... 1

6

Energy-saving tips .................................................................................. 1

6

Problems with your appliance? ..................................................................... 1

7

Limited warranty ...................................................................................... 1 - 1

1

8

9

10

11

88

99

9

8

Installing the handle

................................................................................. 1

4

Safety instructions and warnings

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Before the appliance is used, it must be properly positioned and installed as

described in this manual. So read the manual carefully. To reduce the risk of fire,

electric shock or injury when using the appliance, follow basic precautions, including

the following:

 To prevent injury or damage to the

appliance, it should be unpacked and set

up by two people.

 In the event that the appliance is

damaged on delivery, contact the supplier

immediately before connecting to the

power line.

 To guarantee safe operation, ensure that

the appliance is set up and connected as

described in these operating instructions.

 Disconnect the appliance from the power

source if any fault occurs. Pull out the plug,

switch off or remove the fuse.

 When disconnecting the appliance, pull on

the plug, not on the cable.

 Any repairs and work on the appliance

should only be carried out by the

customer service department, as

unauthorized work could prove highly

dangerous for the user. The same applies

to changing the power cable.

 Do not stand on the base, drawers or

doors or use them to support anything

else.

 Do not allow flames or sources of ignition

to enter the appliance. When transporting

and cleaning the appliance, ensure that

the refrigerant circuit is not damaged. In

the event of damage, make sure that

there are no ignition sources nearby.

■

Keep the room well ventilated.

 This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities or

lack of experience and knowledge unless

they have been given initial supervision or

instruction concerning use of the

appliance by a person responsible for

their safety. Children should be

supervised to ensure that they do not play

with the appliance.

 Do not store explosives or sprays using

combustible propellants such as butane,

propane, pentane, etc., in the appliance.

Electrical components might cause

leaking gas to ignite. You may identify

such sprays by the printed contents or a

flame symbol.

 Do not use electrical devices inside the

appliance.

 Before you throw away your old

appliance:

Take off the door. Leave the parts in place

so that children may not easily climb

inside.

 When disposing of your appliance, please

choose an authorized disposal site.

2

Safety instructions and warnings

Children in the household

DANGER, RISK OF CHILD ENTRAPMENT!

Before you throw away your old appliance:

Take off the door. Leave the shelves in place

so that children may not easily climb inside.

 Never leave packaging material with

children. There is a danger of poisoning or

suffocation by the cardboard boxes and

plastic sheets!

 This appliance is in no way a toy for

children!

 If you will no longer be using the

appliance, remove the doors and gasket

seals and store in a safe place. In this way

you will prevent the danger of children

becoming trapped inside the appliance.

 Never allow children to operate, play with,

or crawl inside the appliance.

 Child entrapment and suffocation are not

problems of the past. Junked or

abandoned appliances are still

dangerous....even if they will “just sit in the

garage a few days”.

Grounding instructions

 This appliance must be grounded.

 If the power socket of the home system is

not grounded in accordance with the

current legal regulations, connect the

appliance to the grounding lead itself after

consulting a specialized technician.

Do not use an extension cord with this

appliance.

 This appliance is equipped with a power

cord having a grounding wire with a

grounding plug. The plug must be plugged

into an outlet that is properly installed and

grounded.

 Consult a qualified electrician or service

technician if the grounding instructions are

not completely understood, or if doubt

exists as to whether the appliance is

properly grounded.

 If the outlet is a standard 2-prong wall

outlet, it is your personal responsibility and

obligation to have it replaced with a

properly grounded 3-prong wall outlet.

 For best operation, plug this appliance into

its own electrical outlet to prevent flickering

of lights, blowing of fuse or tripping of

circuit breaker.

 Do not under any circumstances cut or

remove the third (ground) prong from the

power cord.

 Do not use an adapter plug with this

appliance.

3

IMPORTANT SAFETY INFORMATION

Improper handling can cause serious damage to the appliance and/or injury to the user.

This unit is designed for domestic indoor use only. Do not use the unit for industrial use.

Any other use may invalidate the warranty. Please review the rating label located on the

rear panel of the unit for electrical and other technical data related to this unit. The unit

must be used in a properly grounded wall outlet. Please read and follow the safety

information listed below to reduce the risk of fire, electric shock, or injury.

SAFETY PRECAUTIONS

 Carefully inspect the appliance. If you discover any faults, stop the installation and

contact the vendor.

 In the event that the appliance is damaged on delivery, contact the supplier immediately.

 The packaging material is recyclable and is marked with a recycling symbol. For disposal,

follow the local regulations. Packaging materials (plastic bags, polystyrene parts, etc.)

must be kept out of the reach of children, because they present a possible source of

danger.

 Do not exceed the power outlet recommended ratings.

 It is recommended the appliance be connected on its own, independent circuit.

 The unit must be installed in accordance with Provincial and National electrical codes.

 This appliance is equipped with a grounding plug. The plug must connected into an outlet

that is properly installed and grounded in accordance with the National Electrical Code

and local codes and ordinances is required.

 When disconnecting the appliance, pull on the plug, not the cable.

 Do not use extension cords or power strips with this unit. You may need to contact your

electrician if it is necessary to use a longer cord or if you do not have a grounded outlet.

Do not modify the power cord’s length or share the outlet with other appliances.

 Any repairs and work on the appliance should only be carried out by the customer service

department, as unauthorized work could prove highly dangerous for the user. The same

applies to changing the power cable.

 Component parts shall be replaced with manufacture’s components so as to minimize the

risk of possible ignition due to incorrect parts or improper service.

 Unplug the unit if it is not going to be used for an extended period of time.

 Always turn the unit off and unplug it from the electric outlet when cleaning.

 Use outlets that cannot be turned off by a switch or pull chain.

 Do not start or stop the unit by switching the circuit’s power on and off.

 Never plug or unplug the unit with wet hands.

 Do not stand on the base, drawers or doors or use them to support anything else.

4

 Do not allow flames or sources of ignition to enter the appliance. When transporting and

cleaning the appliance, ensure that the refrigerant circuit is off. In the event of damage,

make sure that there are no ignition sources nearby.

 This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities or lack of experience and knowledge unless they

have been given initial supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be supervised to ensure that they do

not play with the appliance.

 Do not store explosives or sprays using combustible propellants such as butane, propane,

pentane, etc., in the appliance.

 Electrical components might cause leaking gas to ignite. You may identify such sprays by

the printed contents or a flame symbol.

 Do not store explosives or sprays using combustible propellants such as butane, propane,

pentane, etc., in the appliance.

 Do not use electrical devices inside the appliance.

 DANGER : before you throw away your old appliance: Take off the door. Leave the parts in

place so that children may not easily climb inside.

 When disposing of your appliance, please choose an authorized disposal site.

 Do not under any circumstances cut or remove or bypass the third (ground) prong from

the power cord.

 Do not locate the appliance in direct sunlight or in a room with a high ambient

temperature, or in the vicinity of any sources of direct heat, such as a radiator or oven.

 To prevent back and other types of injuries, use at least two people to move and install

the appliance.

 Install the wine refrigerator in a well ventilated area.

 The temperature range for this refrigerator is optimized for Perishable food items .

 Do not place hot or warm items into the refrigerator before they cool down to room

temperature.

 Only use in an upright position on a flat, level surface and provide proper ventilation.

 Do not pinch or kink the power supply line between the unit and cabinet.

 Do not place any other appliances on top of the unit.

 Do not turn the unit upside down, on its side, or at an angle off level.

BE CAREFUL WHEN HANDLING, MOVING, AND USING THE APPLIANCE TO AVOID EITHER

DAMAGING THE REFRIGERANT TUBING OR INCREASING THE RISK OF A LEAK.

5

Transportation and unpacking

 If the appliance is transported in a

horizontal position, the oil from the

compressor may leak into the cooling

circuit. For this reason, allow the appliance

to rest in a vertical position for 12 hours

before turning it on, so that the oil flows

back into the compressor.

 Remove the external packaging, remove

the protective plastic film from the surface

of the appliance (if used) and clean the

external parts of the appliance with a

cleaner designed for this purpose. Do not

use steel wool or any coarse agents,

which could irreparably damage the

surface of the appliance. Carefully remove

all papers and adhesive tape from the

appliance, doors and other parts packed in

polystyrene. Remove documents and

accessories from inside the appliance.

 The packaging material is recyclable and

is marked with a recycling symbol. For

disposal, follow the local regulations.

Packaging materials (plastic bags,

polystyrene parts, etc.) must be kept out of

the reach of children, because they

present a possible source of danger.

 Carefully inspect the appliance. If you

discover any faults, stop the installation

and contact the vendor.

Installation instructions

Before installation of your appliance

 The placement of the appliance must meet the requirements in the section Operating

conditions on page 7 and must include a stable floor with a load-bearing capacity

corresponding to the weight of the appliance.

 Level the appliance using the adjustable feet. Ensure there is a gap between the bottom edge

of the appliance and the ground, so that there is sufficient circulation of air. This will ensure

the optimal performance of the cooling system.

 Check whether any coolant circulation pipes have been damaged during the installation.

 Use the appliance only for the purposes for which it has been designed.

 The appliance must be located on a rigid and even surface. In this way you will ensure free

circulation of the coolant and effective operation of your appliance.

 If possible, place the appliance in a cool, well ventilated and dry room.

 Do not locate the appliance in direct sunlight or in a room with a high ambient temperature, or

in the vicinity of any sources of direct heat, such as a radiator or oven. This would cause the

compressor to work harder, resulting in a substantially higher power consumption level.

either built-in or free-standing units. For free-standing installation, allow at least 4” of

clearance at the back, sides and top of the unit to permit the proper air circulation to

cool the compressor and condenser. Even for built-in installation, certain clearances

are necessary for optimal operation. In this case, allow 3/16” on both sides, 2” at the

rear and 1/16” at the top to ensure proper ventilation. Take care that the air vent at

the front of the appliance is never covered or blocked in any way.

NOTE: Models CL24WC2, CLFD24WC, CL242WBV, CL15WC and CL151WBV can be installed as

6

Installation instructions

FOR YOUR SAFETY

While performing installations described in this section, gloves and

safety glasses or goggles should be worn.

Tools you will need:

Installation dimensions (mm/in)

If your appliance is to be built-in, follow the diagram and chart below for appropriate

dimensions.

7

Installation instructions

Model CL15WC/CL151WBV CL24WC2 CLFD24WC CL242WBV

A 660mm (26″) 660mm (26″) 660mm (26″) 660mm (26″)

B 387mm (15¼″) 610mm (24″) 610mm (24″) 610mm (24″)

C 883mm (34 ¾″) 883mm (34 ¾″) 883mm (34 ¾″) 883mm (34 ¾″)

D 152mm (6″) 152mm (6″) 152mm (6″) 152mm (6″)

E 51mm (2″) 51mm (2″) 51mm (2″) 51mm (2″)

Electrical requirements

A 115 Volt (AC only) 60 Hz grounded electrical supply equipped with a 15- or 20- amp fuse or

circuit breaker is required. It is recommended that a separate circuit serving only your appliance

be provided. Use outlets that cannot be turned off by a switch or pull chain. Connect this

appliance to a 3-prong power supply outlet that has a ground terminal. If you only have a 2-prong

outlet, have it replaced by a qualified technician with an outlet that meets the local codes. DO

NOT USE AN EXTENSION CORD. Required nominal voltage and frequency are indicated on

the rating plate. The connection to the power supply and grounding has to be made according to

current standards and regulations.

8

Operation

Operating conditions

Proper operation of the appliance is

guaranteed only if the following conditions are

met:

 The temperature in the room where the

appliance is located conforms to the

climate class stated on the appliance’s

rating label.



Maximum ambient relative humidity:

RH75%.



The appliance must be placed at a

sufficient distance from heat sources ( e.g.,

ovens, central heating, direct sunlight,

etc.).



The appliance must be located in such a

place that it is protected against the effects

of weather.

 Regular maintenance is performed

according to the instructions in this user’s

manual.



The ventilation openings on the appliance

must not be covered.



Correct installation ( e.g. leveling, the

capacity of the system corresponds to

the specifications on the rating label of

the appliance).

For Models CLFD24WC, CL242WBV and

CL15WC, CL151WBV

Control elements

1) “ ” button

To turn the unit ON and OFF, press and

hold this button for approximately 3 seconds.

2) “ ” button

Energy conservation button: Pressing this

button for 3 seconds will turn the energy

conservation mode ON or OFF. In this

mode, the LED light and display will turn

off, and the C/F light will be on.

3)

“

indicator light

Shows that the compressor is in operation.

4)

“

C/F”

indicator light

The temperature scale is changed by

pressing the “C/F”

button.

5)

“ ”

button

Used to increase (warm) the temperature

in steps of 1F (or 1C).

6)

“ ” button

Used to decrease (cool) the temperature in

steps of 1F (or 1C).

7) “°C/°F”

button

Press this button to switch the indicator

light betweenC/F.

8)

“ ”

button

Turns the interior light ON and OFF. (If you

use this button, the light is no longer con-

trolled by the reed switch, and remains

ON.)

9)

LED display

Shows the temperature of the internal

cabinet.

Setting the temperature

 Insert the power plug into a properly

grounded power socket.

 Use the

/

buttons to set the desired

temperature of the appliance. Each time

the

/

buttons are pressed, the

temperature will increase / decrease by

1F (or 1C).

 You can set the temperature in the range

of 39°F to 64°F (or 4°C to 18°C) .

9

Operation

For Model CL24WC2:

Control elements

1) “ ” button

To turn this unit ON and OFF, press and

hold this button for approximately 3

seconds.

2) “ ” button

Energy conservation button: Pressing this

button for 3 seconds will turn the energy

conservation mode either ON or OFF. In

this mode, the LED light and display will

be turned off; the °F/°C light will be on.

3) “ ” button (left)

Pressing this button will increase (warm)

the temperature of the upper chamber in

steps of 1F (or 1C).

4) “ ” button (left)

Pressing this button will lower (cool) the

temperature of the upper chamber in steps

of 1F (or 1C).

5) LED display

Displays temperature for the upper zone.

6) “

“ indicator light

Indicates that compressor is operating.

7) “°C/°F ” indicator light

Will change as the “°C/°F ” button is

pressed.

8) LED display

Displays temperature for the lower zone.

9) “ ” button (right)

Pressing this button will increase (warm) the

temperature of the lower chamber in steps of

1F (or 1C).

10) “ ” button (right)

Pressing this button will lower (cool) the

temperature of the lower chamber in steps of

1F (or 1C).

11) “°C/°F ” button

Pressing this button switches the indicator

light between °C and °F.

12)

“ ”

button

Turns the interior light ON or OFF. (If you

use this button, the light is no longer con-

trolled by the reed switch, and remains ON.)

Setting the temperature

 When you press the or button, the

system will enter the set-up mode in the

upper or lower compartment automatically.

The LED will flash and display the setting

temperature.

 When you press the button once, the

temperature will increase or decrease by

1F (or 1C). If you try to go beyond the

minimum/maximum value that can be

established, the display will jump to the

lowest/highest adjustable temperature value

automatically. If a button is not pressed for 5

seconds, the LED will stop flashing and the

setting mode will be exited.

 Temperature range for upper and lower

compartments: The temperature setting can

be adjusted from 39°F to 64°F

(or 4°C to

18°C).

10

Operation

Functions

 Temperature Memory Function

If the power is suddenly lost, the set

temperature will be saved by the unit. Once

the power is back on, the unit will be at the

same set temperature.

 “Close Door” Reminder Function

When you forget to close the door or the

door is not fully closed, there will be warning

alarm after 5 minutes.

 Temperature Alarm Function

If the interior temperature is higher than

73°F (23°C), “HI” is shown on the display

panel and the buzzer alarm sounds

continuously after one hour. This indicates

that the inner temperature is too high, and

you should look for the reason. If the inner

temperature is lower than 32°F (0°C), “LO”

is shown on the display panel; the alarm

and the malfunction indicator light go on at

the same time.

Note:

If too many bottles are put in at once or the

door has not been closed tightly, the unit

will display the "HI" signal on the display

panel. This is normal. Please wait 5 minutes

after closing the door and “HI” will

disappear.

 It is normal that the cabinet shows “HI” or

“LO” from time to time. If it occurs frequently

or lasts for a long time, you can restart the

unit by unplugging it, then re-plugging after

5 minutes. If the problem occurs again after

restarting, please contact customer service.

 Before reconnecting the power, wait 3 to 5

minutes. Otherwise you could damage your

appliance. If you attempt to start the

appliance before the end of this time delay,

the appliance will not turn on.

 If you turn on the appliance for the first time

or after a restart, or after it has been out of

operation for a long time, there may be a

temperature difference between the

temperature inside the appliance and that

on the LED display. This is a normal event

caused by the duration of the activation

period. Leave the appliance turned on for

several hours and the temperatures will

stabilize during operation.

11

Shelves

(Models：CLFD24WC, CL15WC , CL151WBV)

Do not cover racks with aluminum

foil or any other material that will

prevent adequate air circulation

within the cabinet.

■

To prevent damaging the doors or gasket

seals, open the doors wide when removing

the shelves.

 For easier handling of bottles, it is

necessary to pull the shelf out by at least

1/3. The sides of the shelves are equipped

with protective stoppers which prevent

bottles from falling from the shelves.

■

When removing / inserting the shelves from

/ into the rails, lift one side of the shelf as

shown in the picture below and pull the

shelf out towards you, or push it in when

inserting it, until one side is securely seated

on the rail.

(Model：CL24WC2)

 To prevent damaging the door gasket, make

sure to have the door all the way opened

when pulling shelves out of the rail

compartment. For easy access to the

bottles, you must pull the shelves

approximately 1/3 out of the rail

compartment.

 To remove the shelves out of the rail, pull

each shelf approximately 1/3 out. Use a

long flat screwdriver to press down the left

plastic notch as shown in Figure A and at

the same time lift the right plastic notch as

shown in Figure B. Then proceed to pull out

the shelf slowly.

Figure A

Figure B

12

Operation

Reversing the door (

for Models CL24WC2 & CL15WC & CL151WBV )

13

unscrew 2 screws at boom and remove the Reed switch (6),then

install (6) a op of door frame, Unscrew the scr ew located

undernea th the door frame and the limit device (5), and relocate it

a he leend side o he do or frame.The door revolves 180 degrees.

This operang requires two persons.

Only for CL15WC/CL151WBV

INSTALLING THE HANDLE

To install the handle please follow the below instructions:

1. Pull away the door gasket in the area where the handle is to be installed on the left side as

shown below in Fig .1 . The gasket is easily displaced by hand, no tools are necessary.

2. Align the handle with the screws installed. Tighten the screws using a Phillips head screwdriver

until the handle sets both flush and secured tightly against the door frame. DO NOT over

tighten as this will cause damage to the handle assembly. Fig .2 Replace the door gasket to its

original position.

 Gasket  Phillips Head Screw Driver

Phillips Head Screw  Handle

Fig. #1

Fig. #2

Operation

14

Operation

Wine storage

 If you are storing wine for long periods of

time, it should be stored at a temperature

of between 10°C and 14°C (50°F and

57°F).

 This is the range of temperatures wine

coolers are kept at, and it is just right to

allow wine to mature properly.

 The following drinking temperatures are

recommended for the various types of

wine:

Red wines: +57°F to +64°F (+14°C to +18°C)

Rosé wines:+50°F to +54°F (+10°C to +12°C)

White wines: +46°F to +54°F (+8°C to +12°C)

Sparkling wines, Prosecco:

+45°F to +48°F (+7°C to +9°C)

Champagne:+41°F to +45°F (+5°C to +7°C)

Storage diagrams

For wine:

(For 750ml Bordeaux bottles)

Model: CL15WC

For beverages and wine:

(For 335ml cans and 750ml Bordeaux bottles)

Model: CL242WBV

15

Cleaning and care

Cleaning the appliance

 Wipe the internal surface of the appliance

with a soft sponge lightly dipped in a table

salt solution. Add 2 tablespoons of table salt

to a quart of warm water.

 Wash the shelves in warm water with a

small amount of kitchen dishwashing liquid,

rinse and wipe dry. Allow the wooden

shelves (if the appliance has them) to dry

completely before returning them to the

wine cooler.

 Use a glass cleaner to clean the glass

surfaces and a commercially available

stainless-steel cleaning agent for the

stainless-steel surfaces.

 All parts that you wash with a soft sponge

lightly dipped in water must be properly

wiped dry.

 Wipe the outer surface with a soft sponge

lightly dipped in water with a small amount

of dishwashing liquid. Wipe dry using a

clean cloth.

 Dust and liquids can cause door gaskets to

stick to the cabinet and tear when you open

the door. Wash gaskets with a mild

detergent and warm water. Rinse and dry

thoroughly after cleaning.

 Do not use steel wool or sponges with steel

wool on stainless steel surfaces. They

could damage the surface.

 Do not use cleaning waxes, concentrated

cleaning agents, bleaches or cleaning

products containing kerosene on the plastic

or rubber parts.

 Never use paper towels or window

cleaners on the plastic parts.

Moving

 Remove all contents before moving the

appliance.

 Use tape to secure freely moving parts such

as racks inside the appliance.

 To prevent damage, screw in the leveling

feet.

 Tape the door shut.

 Ensure that the appliance always remains

in a vertical position while being

transported. To prevent the appliance from

damage during transport you can cover it

with a blanket or other soft cloth.

Energy-saving tips

 Locate the appliance away from sources of

heat and out of direct sunlight.

 Ensure sufficient ventilation. Under no

circumstances should you cover the

ventilation openings.

 Only open the door when necessary. Do not

leave the door open for a long time or open

the door too often.

 If the appliance will not be used for several

months, remove all items and turn off the

appliance. Clean and dry the interior

thoroughly. To prevent odor and mold

growth, leave the door open slightly,

blocking it open if necessary.

16

Problems with your appliance?

You can solve many common appliance problems easily, saving you the cost of a possible service

call. Try the suggestions below to see if you can solve the problem before calling the servicer.

Troubleshooting guide

Problem Possible cause

Appliance does not operate.

Not plugged in.

The appliance is turned off.

Tripped circuit breaker or blown fuse.

Appliance is not cold enough.

Check the temperature control setting.

External environment may require a higher

setting.

The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

Turns on and off frequently.

The room temperature is higher than normal.

A large amount of contents has been added to

the appliance.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The light does not work.

Not plugged in.

Tripped circuit breaker or blown fuse.

The bulb has burned out.

The light button is OFF.

Vibrations. Check to be sure the appliance is level.

The appliance seems to make too

much noise.

The rattling noise may come from the flow of

the refrigerant, which is normal.

As each cycle ends, you may hear gurgling

sounds caused by the flow of refrigerant in

your appliance.

Contraction and expansion of the inside walls

may cause popping and crackling noises.

The appliance is not level.

The door will not close properly.

The appliance is not level.

The door was reversed and not properly

re-installed.

The gasket is dirty.

The shelves are out of position.

17

Limited Warranty

PARTS AND LABOR WARRANTY INFORMATION

SUMMIT Appliances are manufactured to provide outstanding value, and your satisfaction is our goal on every product.

All SUMMIT major appliances carry a one-year limited warranty on both parts and labor. All refrigerators and freezers

carry an additional four years on the compressor. Certain exclusions may apply.

Certain models (including SUMMIT ranges, wall ovens, and cooktops) are manufactured for us in the U.S. and carry the

manufacturer's warranty (also one year parts and on-site labor).

For details on specific warranty issues, please contact us.

GENERAL PARTS AND LABOR WARRANTY

Summit warrants to the original purchaser of every new unit, the cabinet and all parts thereof, to be free from

defects in material or workmanship under normal and proper use and maintenance service as specified by Summit

and upon proper installation and start-up in accordance with the instruction packet supplied with each Summit

unit. Summit’s obligation under this warranty is limited to a period of 12 months from the date of original purchase.

Any parts covered under this warranty that are determined by Summit to have been defective, within the above

said period, are limited to the repair or replacement, including labor charges, of defective parts or assemblies. The

labor warranty shall include pre-approved standard straight time labor charges only and reasonable travel time, as

determined by Summit.

COMPRESSOR WARRANTY

In addition to the warranty period stated above, Summit warrants its hermetically sealed compressor to be free

from defects in both material and workmanship, under normal and proper use and maintenance, for a period of 60

months from the date of original purchase. Compressors determined by Summit to have been defective within this

extended time period will, at Summit’s option, be either repaired or replaced with a compressor or compressor

parts of similar design and capacity. The above said extended compressor warranty applies only to hermetically

sealed parts of the compressor and DOES NOT apply to any other parts or components, including, but not limited

to, cabinet, paint finish, temperature control, refrigerant, metering device, driers, motor starting equipment, fan

assembly or any other electrical component, etc.

WARRANTY CLAIMS

All claims for labor or parts must be made directly through Summit. All claims should include model number of the

unit, serial number of the cabinet, proof of purchase, date of installation, and all pertinent information supporting

the existence of the alleged defect. In case of compressor warranty, the compressor model tag must be returned to

Summit along with the above listed information. All claims should be filed within 30 days of completed repair or the

warranty claim could be refused.

THINGS NOT COVERED BY THIS WARRANTY

Summit’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to the

additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other

than those expressly covered by this warranty.



NO CONSEQUENTIAL DAMAGES: Summit is not responsible for economic loss; profit loss; or special,

direct, indirect, or consequential damages, including without limitation, losses or damages arising from food

or product spoilage claims whether or not on account of refrigeration failure.



WARRANTY IS NOT TRANSFERRABLE: This warranty is not assignable and applies only in favor of the

original purchaser/user to whom delivered. Any such assignment or transfer shall void the warranties herein

made and shall void all warranties, express or implied, including any warranty of merchantability or fitness

for a particular purpose.



IMPROPER USE: Summit assumes no liability for parts or labor coverage for component failure or other

damages resulting from improper usage or installation or failure to clean and/or maintain product as set forth

in the warranty packet provided with the unit.



ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR

INSTALLATION, FIRE, FLOOD, ACTS OF GOD: Summit is not responsible for the repair or replacement of

any parts that Summit determines to have been subjected after the date of manufacture to alteration,

neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act of God.

18

Limited Warranty

,

cont’d



IMPROPER ELECTRICAL CONNECTIONS: Summit is not responsible for the repair or replacement of

failed or damaged components resulting from electrical power failure, the use of extension cords, low

voltage, or voltage drops to the unit.



NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE: There

are no other warranties, expressed, implied or statutory, except the parts & labor warranty and the extended

compressor warranty specifically described above. These warranties are exclusive and in lieu of all other

warranties, including implied warranty and merchantability or fitness for a particular purpose. There are no

other warranties which extend beyond the description on the face hereof.

 OUTSIDE CONTIGUOUS UNITED STATES: This warranty does not apply to, and Summit is not

responsible for, any warranty claims made on products sold or used outside the contiguous (48) United

States. To be clear, this warranty excludes the states of Alaska and Hawaii and all off-shore territories.

REQUESTING SERVICE

If you are in need of service, please either fill out a service request on our website,

www.summitappliance.com/support

or call us at 800-932-4267 or 718-893-3900. Please be prepared to give us the following information: your name,

address, phone, email, model, serial, date of purchase, place of purchase, and the problem you are having.

FELIX STORCH, INC.

770 Garrison Avenue

Bronx, NY 10474

Phone: (718) 893-3900

Fax: (844) 478-8799

www.summitappliance.com

Printed in China

19

WARNING: This product can expose you to chemicals including Nickel

(Metallic) which is known to the Stat

For more information go to

Note: Nickel is a component in all stainless steel and some other metal components.

WARNING: This product can expose you to chemicals including Nickel

(Metallic) which is known to the State of California to cause cancer.

For more information go to

www.P65Warnings.ca.gov

Note: Nickel is a component in all stainless steel and some other metal components.

WARNING: This product can expose you to chemicals including Nickel

e of California to cause cancer.

Note: Nickel is a component in all stainless steel and some other metal components.

La page charge ...

Summit CLFD24WC Le manuel du propriétaire

Summit CLFD24WC Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents