CHAUVET DJ GigBar Move White DJ Complete Light Set Manuel utilisateur

User Manual

MOVE

LASER RADIATION

AVOID DIRECT EYE EXPOSURE

CLASS 3R LASER PRODUCT

CLASSIFIED PER EN/IEC 60825-

1:2014

Table of Contents

GigBAR MOVE User Manual Rev. 4

i

TABLE OF CONTENTS

. Warranty/Garantía/Garantie........................................................................... 1

Limited Warranty...................................................................................................... 1

Garantía Limitada..................................................................................................... 1

Garantie Limitée....................................................................................................... 1

Eingeschränkte Garantie.......................................................................................... 2

Beperkte Garantie.................................................................................................... 2

1. Before You Begin ......................................................................................... 3

What Is Included ...................................................................................................... 3

Unpacking Instructions............................................................................................. 3

Claims ............................................................................................................................ 3

Text Conventions ..................................................................................................... 3

Symbols ................................................................................................................... 3

Disclaimer ................................................................................................................ 3

FCC Statement .............................................................................................................. 4

Intellectual Property ................................................................................................. 4

Safety Notes............................................................................................................. 5

Non-Interlocked Housing Warning ................................................................................. 6

Laser Safety Notes................................................................................................... 6

Laser Safety Label Reproduction............................................................................. 7

Laser Emission Data................................................................................................ 7

Laser Compliance Statement................................................................................... 7

2. Introduction................................................................................................... 8

Product Overview..................................................................................................... 8

Product Dimensions................................................................................................. 9

3. Setup.............................................................................................................. 10

AC Power................................................................................................................. 10

Fuse Replacement ......................................................................................................... 10

Power Linking................................................................................................................. 10

Mounting .................................................................................................................. 11

Orientation...................................................................................................................... 11

Rigging........................................................................................................................... 11

Proper Usage........................................................................................................... 11

4. Operation....................................................................................................... 12

Control Panel Operation........................................................................................... 12

Menu Map ................................................................................................................ 12

Configuration (Standalone) ...................................................................................... 14

Automatic Mixed Effect Mode ........................................................................................ 14

Sound-Active Mixed Effect Mode................................................................................... 14

Sound Sensitivity ............................................................................................................ 14

Configuration (DMX) ................................................................................................ 15

Starting Address............................................................................................................. 15

DMX Channel Assignments and Values .................................................................. 16

17-Channel..................................................................................................................... 19

3-Channel....................................................................................................................... 20

Wireless Footswitch ................................................................................................. 21

Footswitch Operation ..................................................................................................... 21

IRC-6 Infrared Remote Control ................................................................................ 22

IRC-6 Operation ............................................................................................................. 22

Manual Color Control...................................................................................................... 22

Master/Slave Mode .................................................................................................. 23

5. Maintenance.................................................................................................. 24

Product Maintenance ............................................................................................... 24

6. Technical Specifications.............................................................................. 25

7. Returns.......................................................................................................... 27

8. Contact Us..................................................................................................... 28

1. Antes de Empezar ........................................................................................ 29

Qué va Incluido ........................................................................................................ 29

Instrucciones de Desembalaje................................................................................. 29

Reclamaciones............................................................................................................... 29

GigBAR MOVE User Manual Rev. 4

Table of Contents

ii

Convenciones del Manual........................................................................................ 29

Símbolos .................................................................................................................. 29

Exención de responsabilidad ................................................................................... 29

Declaración de la FCC ................................................................................................... 30

Propiedad intelectual................................................................................................ 30

Notas de Seguridad ................................................................................................. 31

Advertencia sobre Carcasa no Cerrada......................................................................... 32

Notas de Seguridad sobre Láser ............................................................................. 32

Reproducción de la Etiqueta de Seguridad del Láser.............................................. 33

Datos de Emisión Láser........................................................................................... 33

Declaración de Conformidad Láser.......................................................................... 33

2. Introducción.................................................................................................. 34

Vista general del producto ....................................................................................... 34

Dimensiones del producto........................................................................................ 35

3. Instalación..................................................................................................... 36

Corriente alterna ...................................................................................................... 36

Sustitución del fusible .................................................................................................... 36

Alimentación en cadena................................................................................................. 36

Montaje .................................................................................................................... 37

Orientación..................................................................................................................... 37

Colocación ..................................................................................................................... 37

Uso Adecuado.......................................................................................................... 38

4. Funcionamiento............................................................................................ 39

Funcionamiento del panel de control ....................................................................... 39

Mapa de menú ......................................................................................................... 39

Configuración (Independiente)................................................................................. 41

Modo Efecto Mezclado Automático................................................................................ 41

Modo Efecto Mezclado de Sonido Activo por Sonido .................................................... 41

Sensibilidad al sonido ..................................................................................................... 41

Configuración (DMX)................................................................................................ 42

Dirección de inicio .......................................................................................................... 42

Valores y asignaciones de canal DMX..................................................................... 42

35 canales...................................................................................................................... 42

17 canales...................................................................................................................... 44

3 canales........................................................................................................................ 46

Funcionamiento del Conmutador de Pie.................................................................. 47

IRC-6 control remoto por infrarrojos......................................................................... 48

Funcionamiento de IRC-6 .............................................................................................. 48

Control manual de color.................................................................................................. 48

Modo Maestro/Esclavo............................................................................................. 49

5. Mantenimiento .............................................................................................. 50

Mantenimiento del producto..................................................................................... 50

6. Especificaciones Técnicas.......................................................................... 51

7. Devoluciones ................................................................................................ 53

8. Contacto........................................................................................................ 54

1. Avant de Commencer................................................................................... 55

Ce Qui Est Compris ................................................................................................. 55

Instructions Relatives au Déballage......................................................................... 55

Réclamations ................................................................................................................. 55

Conventions manuelles............................................................................................ 55

Symboles ................................................................................................................. 55

Clause de Non-Responsabilité................................................................................. 55

DÉCLARATION FCC ..................................................................................................... 56

Propriété intellectuelle.............................................................................................. 56

Consignes de Sécurité............................................................................................. 57

Avertissement : Boîtier non Verrouillable ....................................................................... 58

Consignes de Sécurité Relatives au Laser .............................................................. 58

Reproduction de l’Étiquette de Sécurité Laser......................................................... 59

Données d'émission laser ........................................................................................ 59

Déclaration de Conformité Laser ............................................................................. 59

2. Introduction................................................................................................... 60

Table of Contents

GigBAR MOVE User Manual Rev. 4

iii

Vue d'ensemble du produit ...................................................................................... 60

Dimensions du produit ............................................................................................. 61

3. Configuration................................................................................................ 62

Alimentation CA ....................................................................................................... 62

Remplacement des fusibles........................................................................................... 62

Connexion électrique ..................................................................................................... 62

Installation................................................................................................................ 63

Orientation...................................................................................................................... 63

Suspension .................................................................................................................... 63

Utilisation Adéquate ................................................................................................. 63

4. Fonctionnement............................................................................................ 64

Fonctionnement du Panneau de Commande .......................................................... 64

Plan du menu........................................................................................................... 64

Configuration (Autonome)........................................................................................ 66

Mode Effet Mélangé Automatique.................................................................................. 66

Mode effet Mélangé Activé par le Son ........................................................................... 67

Sensibilité sonore............................................................................................................ 67

Configuration (DMX) ................................................................................................ 68

Adresse de départ.......................................................................................................... 68

Affectation de canaux DMX et valeurs..................................................................... 69

35 canaux....................................................................................................................... 69

17 canaux....................................................................................................................... 72

3 canaux......................................................................................................................... 73

Utilisation de la pédale sans fil................................................................................. 74

IRC-6 télécommande par infrarouge........................................................................ 75

Fonctionnement de la IRC-6 .......................................................................................... 75

Contrôle manuel de la couleur........................................................................................ 75

Mode maître/esclave................................................................................................ 76

5. Entretien........................................................................................................ 77

Entretien de l'appareil .............................................................................................. 77

6. Spécificités Techniques............................................................................... 78

7. Renvois.......................................................................................................... 80

8. Nous Contacter............................................................................................. 81

1. Erste Schritte ................................................................................................ 82

Packungsinhalt......................................................................................................... 82

Anweisungen für das Auspacken............................................................................. 82

Schadensmeldung ......................................................................................................... 82

Konventionen des Handbuchs ................................................................................. 82

Symbole ................................................................................................................... 82

Haftungsausschluss................................................................................................. 82

FCC-Konformitätserklärung ........................................................................................... 83

Geistiges Eigentum.................................................................................................. 83

Sicherheitshinweise ................................................................................................. 84

Achtung! Kein Schutz bei geöffnetem Gehäuse ............................................................ 85

Hinweise zur Lasersicherheit ................................................................................... 85

Warn- und Sicherheitsschilder auf dem Lasergerät................................................. 86

Laserexposition – Warnung ........................................................................................... 86

Laseremissionsdaten ............................................................................................... 86

Laser-Konformitätserklärung.................................................................................... 86

2. Einleitung ...................................................................................................... 87

Produktüberblick ...................................................................................................... 87

Produktabmessungen .............................................................................................. 88

3. Einrichten des Geräts .................................................................................. 89

Wechselstrom .......................................................................................................... 89

Auswechseln der Sicherung........................................................................................... 89

Reihenschaltung der Geräte .......................................................................................... 89

Montage ................................................................................................................... 90

Montagerichtung ............................................................................................................ 90

Hängende Montage........................................................................................................ 90

Bestimmungsgemäße Verwendung......................................................................... 90

4. Betrieb ........................................................................................................... 91

GigBAR MOVE User Manual Rev. 4

Table of Contents

iv

Betrieb des Bedienfeldes ......................................................................................... 91

Menüstruktur ............................................................................................................ 91

Konfiguration (Einzelplatzmodus) ............................................................................ 93

Automatische-Modus ..................................................................................................... 93

Musiksteuerungs-Modus ................................................................................................ 94

Konfiguration (DMX)................................................................................................. 94

Startadresse................................................................................................................... 94

DMX-Kanal – Zuordnungen und Werte.................................................................... 95

35-Kanal......................................................................................................................... 95

17-Kanal......................................................................................................................... 98

3-Kanal........................................................................................................................... 99

Betrieb mit drahtlosem Fußschalter ......................................................................... 100

IRC-6 Infrared Remote Control ................................................................................ 101

IRC-6 Operation ............................................................................................................. 101

Manuelle Farbsteuerung................................................................................................. 101

Master/Slave-Modus ................................................................................................ 102

5. Wartung......................................................................................................... 103

Wartung des Geräts................................................................................................. 103

6. Technische Daten......................................................................................... 104

7. Reklamationen.............................................................................................. 106

8. Kontaktiere Uns............................................................................................ 107

1. Voordat tu begint.......................................................................................... 108

Wat is er inbegrepen................................................................................................ 108

Uitpakinstructies....................................................................................................... 108

Claims ............................................................................................................................ 108

Tekstconventies ....................................................................................................... 108

Symbolen ................................................................................................................. 108

Disclaimer ................................................................................................................ 108

Verklaring van de FCC................................................................................................... 109

Intellectueel eigendom ............................................................................................. 109

Veiligheidsinstructies................................................................................................ 110

Niet-bevestigde waarschuwing op de behuizing ............................................................ 111

Veiligheidsinstructies voor de laser.......................................................................... 111

Reproductie van veiligheidsetiket voor de laser....................................................... 112

Blootstellingswaarschuwing van de laser....................................................................... 112

Emissiegegevens van de laser ................................................................................ 112

Nalevingsverklaring van de laser ............................................................................. 112

2. Inleiding......................................................................................................... 113

Productoverzicht ...................................................................................................... 113

Productafmetingen................................................................................................... 114

3. Instelling........................................................................................................ 115

AC-stroom................................................................................................................ 115

Vervangen van de zekering ........................................................................................... 115

Power Linking................................................................................................................. 115

Montage ................................................................................................................... 116

Oriëntatie........................................................................................................................ 116

Opbouw.......................................................................................................................... 116

Correct gebruik......................................................................................................... 116

4. Werking ......................................................................................................... 117

Werking van het bedieningspaneel.......................................................................... 117

Menu Map ................................................................................................................ 117

Configuratie (zelfstandig) ......................................................................................... 119

Automatic Mode ............................................................................................................. 119

Geluidsactieve modus.................................................................................................... 119

Configuratie (DMX) .................................................................................................. 120

Startadres....................................................................................................................... 120

DMX-kanaaltoewijzingen en waarden...................................................................... 121

17-kanaals...................................................................................................................... 124

....................................................................................................................................... 124

3-kanaals........................................................................................................................ 125

Bediening van de voetschakelaar ............................................................................ 126

Table of Contents

GigBAR MOVE User Manual Rev. 4

v

Werking IRC-6 (infrarood afstandsbediening 6)....................................................... 127

IRC-6 Operation ............................................................................................................. 127

Handmatige kleurregeling............................................................................................... 127

Master/Slave-modus ................................................................................................ 128

5. Onderhoud .................................................................................................... 129

Productonderhoud.................................................................................................... 129

6. Technische Specificaties............................................................................. 130

7. Retouren........................................................................................................ 132

8. Neem contact Op.......................................................................................... 133

GigBAR MOVE User Manual Rev. 4 Page 1

Warranty/Garantía/Garantie

Limited Warranty

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR

WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,

France, and Germany: www.chauvetlighting.eu/warranty-registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal

use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited

warranty on our website. This warranty extends only to the original purchaser of the product and is not

transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an

original sales receipt from an authorized dealer that shows the product name and date of purchase.

THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal

rights. You may also have other rights that vary from state to state and country to country. This warranty is

valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your

local distributor.

Garantía Limitada

PARA VER EL REGISTRO DE GARANTÍA Y LOS TÉRMINOS Y CONDICIONES COMPLETOS, VISITE

NUESTRO SITIO WEB.

Para clientes en los Estados Unidos y México: www.chauvetlighting.com/warranty-registration.

Para clientes en Reino Unido, República de Irlanda, Bélgica, Países Bajos, Luxemburgo, Francia y

Alemania: www.chauvetlighting.eu/warranty-registration.

Chauvet garantiza que este producto estará libre de defectos de material y mano de obra en condiciones

de uso normales, durante el periodo especificado, sujeto siempre a las exclusiones y limitaciones

establecidas en la garantía limitada completa de nuestro sitio web. Esta garantía se concede únicamente

al comprador original del producto y no es transferible. Para ejercer los derechos que otorga esta garantía,

usted debe proporcionar una prueba de compra en forma de un recibo de compra original, expedido por

un distribuidor autorizado, donde figure el nombre del producto y la fecha de compra. NO EXISTEN

OTRAS GARANTÍAS EXPRESAS NI IMPLÍCITAS. Esta garantía le otorga derechos legales específicos.

Es posible que a usted le asistan otros derechos, que variarán dependiendo del estado o del país. Esta

garantía solamente es válida en los Estados Unidos, Reino Unido, República de Irlanda, Bélgica, Países

Bajos, Luxemburgo, Francia, Alemania y México. Para conocer los términos de garantía en otros países,

consulte a su distribuidor local.

Garantie Limitée

VEUILLEZ VISITER NOTRE SITE INTERNET POUR CONSULTER LES MODALITÉES

D'ENREGISTREMENT DE LA GARANTIE ET LES CONDITIONS GÉNÉRALES COMPLÈTES.

Pour les clients aux États-Unis et au Mexique: www.chauvetlighting.com/warranty-registration.

Pour les clients du Royaume-Uni, de la République d'Irlande, de la Belgique, des Pays-Bas, du

Luxembourg, de la France et de l'Allemagne: www.chauvetlighting.eu/warranty-registration.

Chauvet garantit que cet appareil est exempt de défauts de matériaux et de fabrication dans des

conditions normales d'utilisation, pendant la période spécifiée dans la garantie limitée complète

consultable sur notre site Internet et sous réserve des exclusions et limitations qui y sont énoncées. Cette

garantie ne s'applique qu'à l'acheteur initial du produit et n'est pas transférable. Pour exercer les droits

prévus par cette garantie, vous devez fournir une preuve d'achat sous la forme d'un reçu de vente original

d'un revendeur autorisé qui indique le nom du produit et la date d'achat. IL N'EXISTE AUCUNE AUTRE

GARANTIE EXPRESSE OU IMPLICITE. Cette garantie vous confère des droits légaux spécifique. Vous

pouvez également bénéficier d'autres droits qui varient selon les états et les pays. Cette garantie n'est

valable qu'aux États-Unis, au Royaume-Uni, en République d'Irlande, en Belgique, aux Pays-Bas, au

Luxembourg, en France, en Allemagne et au Mexique. Pour connaître les conditions de garantie dans

d'autres pays, veuillez consulter votre revendeur local.

GigBAR MOVE User Manual Rev. 4

Page 2

Eingeschränkte Garantie

ZUR REGISTRIERUNG FÜR GARANTIEANSPRÜCHE UND ZUR EINSICHT IN DIE VOLLSTÄNDIGEN

GESCHÄFTSBEDINGUNGEN BESUCHEN SIE BITTE UNSERE WEBSITE.

Für Kunden in den USA und in Mexiko: www.chauvetlighting.com/warranty-registration.

Für Kunden im Vereinigten Königreich, in Irland, Belgien, den Niederlanden, Luxemburg,

Frankreich und Deutschland: www.chauvetlighting.eu/warranty-registration.

Chauvet garantiert für die in der auf unserer Website veröffentlichten vollständigen eingeschränkten

Garantie genannten Dauer und unter Vorbehalt der darin genannten Haftungsausschlüsse und -

beschränkungen, dass dieses Produkt bei normalen Gebrauch frei von Material- und Verarbeitungsfehlern

ist. Diese Garantie erstreckt sich nur auf den Erstkäufer des Produkts und ist nicht übertragbar. Zur

Ausübung der unter dieser Garantie gewährten Rechte ist der Kaufbeleg in Form der Originalrechnung

von einem autorisierten Händler vorzulegen, in der die Produktbezeichnung und das Kaufdatum vermerkt

sein müssen. ES BESTEHEN KEINE WEITEREN AUSDRÜCKLICHEN ODER STILLSCHWEIGENDEN

GARANTIEN. Diese Garantie gibt Ihnen besondere gesetzliche Rechte. Und Sie haben möglicherweise

weitere Rechte, die von Land zu Land unterschiedlich sein können. Diese Garantie ist nur in den USA, im

Vereinigten Königreich, in Irland, Belgien, den Niederlanden, Luxemburg, Frankreich, Deutschland und

Mexiko gültig. Bezüglich der Garantiebestimmungen in anderen Ländern wenden Sie sich bitte an Ihren

lokalen Händler.

Beperkte Garantie

GA NAAR ONZE WEBSITE VOOR REGISTRATIE VAN DE GARANTIE EN DE VOLLEDIGE

ALGEMENE VOORWAARDEN.

Voor klanten in de Verenigde Staten en Mexico: www.chauvetlighting.com/warranty-registration.

Voor klanten in het Verenigd Koninkrijk, Ierland, België, Nederland, Luxemburg, Frankrijk en

Duitsland: www.chauvetlighting.eu/warranty-registration.

Chauvet garandeert dat dit product bij normaal gebruik vrij zal blijven van defecten in materiaal en

vakmanschap, voor de opgegeven periode en onder voorbehoud van de uitzonderingen en beperkingen

die zijn uiteengezet in de volledige beperkte garantie op onze website. Deze garantie geldt uitsluitend voor

de oorspronkelijke koper van het product en is niet overdraagbaar. Om onder deze garantie rechten uit te

oefenen, moet u een aankoopbewijs overleggen in de vorm van een origineel verkoopbewijs van een

geautoriseerde dealer, waarop de naam van het product en de aankoopdatum zichtbaar zijn. ER ZIJN

GEEN ANDERE EXPLICIETE OF IMPLICIETE GARANTIES. Deze garantie geeft u specifieke wettelijke

rechten. Mogelijk heeft u ook andere rechten die van staat tot staat en van land tot land verschillen. Deze

garantie is uitsluitend geldig in de Verenigde Staten, het Verenigd Koninkrijk, Ierland, België, Nederland,

Luxemburg, Frankrijk, Duitsland en Mexico. Neem contact op met uw lokale verkoper voor

garantievoorwaarden in andere landen.

Page 3

GigBAR MOVE User Manual Rev. 4

Before You Begin

1. Before You Begin

What Is Included

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetdj.com.

• GigBAR MOVE

•Power Cord

• IRC-6 Remote

•Carrying Bag

•Tripod

• Tripod Carrying Bag

• Footswitch

• User Manual

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

ON A value to be entered or selected

Symbol Meaning

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Laser safety information.

Page 4

Before You Begin

GigBAR MOVE User Manual Rev. 4

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation

.

Intellectual Property

The works of authorship contained in this manual, including, but not limited to, all design, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

CHAUVET, the Chauvet logo, and GigBAR MOVE are registered trademarks or trademarks of Chauvet &

Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company

and product names and logos referred to herein may be trademarks of their respective companies.

Page 5

GigBAR MOVE User Manual Rev. 4

Before You Begin

Safety Notes

The Safety Notes include important laser system safety information. Read and understand all instructions

before powering on the laser for the first time. Knowing these safety instructions is crucial to avoiding laser

eye injury and breaking the law. Keep this User Manual in a safe place for future reference.

STOP AND READ ALL LASER SAFETY DATA

• Lasers can be hazardous and have unique safety considerations. Permanent eye injury and

blindness are possible if lasers are used incorrectly. Pay close attention to each safety

REMARK and WARNING statement in this User Manual. Read all instructions carefully

BEFORE operating this device.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Always disconnect the product from the power source before cleaning.

• Avoid direct eye exposure to the light source while the product is on.

• Make sure the power cord is not crimped or damaged.

• Never disconnect the product from power by pulling or tugging on the cord.

• If mounting the product overhead, always secure to a fastening device using a safety cable.

• Make sure there are no flammable materials close to the product when operating.

• Do not touch the product’s housing when operating because it may be very hot.

• This product is not intended for permanent installation.

• Always make sure that the voltage of the outlet to which you are connecting the product is

within the range stated on the decal or rear panel of the product.

• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the

product to rain or moisture.

• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from

adjacent surfaces.

• Be sure that no ventilation slots on the product’s housing are blocked.

• Never connect the product to a dimmer.

• Make sure to replace the fuse with another of the same type and rating.

• Always use the mounting bracket to carry the product.

• Do not switch the product on/off in short intervals. This will reduce the laser diode life.

• Do not shake this product. Avoid brute force when mounting or operating this product.

• ALWAYS use a safety cable when mounting the product overhead.

• The ambient operating temperature for the laser is 59 °F to 95 °F (15 °C to 35 °C). Do not

operate this product outside this range.

• In the event of a serious operating problem, stop using the product immediately.

• Never try to repair the product. Repairs carried out by unskilled people can lead to damage or

malfunction. Contact the nearest authorized technical assistance center.

CAUTION! Use of controls, adjustments, or procedures other than THOSE specified IN

THIS USER MANUAL may result in hazardous radiation exposure.

• Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to

direct laser light.

• This laser product can potentially cause instant eye injury or blindness if laser light directly

strikes the eyes.

• It is illegal and dangerous to shine this laser into audience areas, where the audience or other

personnel could get direct laser beams or bright reflections into their eyes.

• It is a U.S. federal offense to shine any laser at aircraft.

• To eliminate wear and improve its lifespan, during periods of non-use completely disconnect

from power via breaker or by unplugging it.

• DO NOT attempt any repairs. Repairs and servicing must be carried out by a certified

technician. Unauthorized modifications are forbidden for safety reasons!

Keep this User Manual for future consultation. If transferring ownership of the product to

another user, be sure this document is kept with the laser.

Page 6

Before You Begin

GigBAR MOVE User Manual Rev. 4

Non-Interlocked Housing Warning

Laser Safety Notes

Laser light is different from any other light. Laser light can cause eye injury if the product is not set up and

used properly. Laser light is a thousand times more concentrated than any other kind of light. This

concentration can cause instant eye injuries by burning the retina (the light-sensitive portion at the back of

the eye). The heat from a laser light cannot be felt, but it can still injure or blind product operators and the

audience. Even very small amounts of laser light at long distances are potentially hazardous.

DO NOT assume that exposure to an individual laser beam is safe, even a tiny beam split off from a larger

beam. This laser product uses dozens of milliwatts of laser power—Class 3B levels internally—and splits

them into multiple beams—Class 3R levels. The individual Class 3R level beams are potentially hazardous

to the eyes.

DO NOT assume that a moving laser light is safe. Laser light is never without risk. Since eye injuries can

occur instantly, it is critical to prevent the possibility of ANY direct eye exposure. According to laser safety

regulations, it is not legal to aim Class 3R lasers into areas where people can be exposed, even if the laser

is aimed below people’s faces, such as at a dance floor.

• This unit contains high power laser devices internally.

• Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation.

• The laser power levels, accessible if the unit is opened, can cause instant blindness, skin

burns, and fires.

STOP AND READ ALL THE LASER SAFETY NOTES BELOW

• Do not operate the laser without first reading and understanding all the safety and technical

data in this manual.

• ALWAYS set up and install all laser effects so that any laser light is at least 3 meters (9.8 feet)

above the floor on which people are standing. See the Proper Usage section of this manual.

• After setup, and prior to public use, test the lasers to ensure they are functioning properly. Do

not use the product if any defect is detected.

• DO NOT point lasers at people or animals.

• DO NOT look into the laser aperture or laser beams.

• DO NOT point lasers into areas where people could be exposed to them.

• DO NOT point lasers at highly reflective surfaces such as windows, mirrors, and shiny metal.

Even laser reflections can be hazardous.

• Never point a laser at aircraft; this is a U.S. federal offense.

• Never point unterminated laser beams into the sky.

• Do not expose the output optic (aperture) to harsh cleaning chemicals.

• Do not use the laser if the housing is damaged, open, or if the optics appear damaged in any

way.

• Never open the laser housing. The high laser power levels inside of the protective housing can

start fires or burn skin, and will cause instant eye injury.

• Never leave this product running unattended.

• The operation of a Class 3R laser show is allowed only if the lasers are operated by a skilled

and well-trained professional, who is familiar with the data included in this manual.

• The legal requirements for using laser entertainment products vary from country to country.

The user is responsible for the legal requirements in the location/country of use.

CAUTION! Do not operate this device in ways not specified in this User Manual. Failure to

follow the instructions will void the warranty, may damage the product, or injure the user

or the audience.

CAUTION! This product cannot be discarded with household waste. Contact your local

waste management service for electronic disposal regulations in your area.

Page 7

GigBAR MOVE User Manual Rev. 4

Before You Begin

Laser Safety Label Reproduction

Laser Exposure Warning

Laser Emission Data

As measured under IEC measurement conditions for classification.

Laser Compliance Statement

Complies with FDA performance standards for laser products except for deviations pursuant to Laser

Notice No. 56, dated May 08, 2019. No maintenance is required to keep this product in compliance with

laser performance standards.

LASER LIGHT AVOID DIRECT EYE EXPOSURE

Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1

Standard “For Safe Use of Lasers”, available from the Laser Institute of America: www.lia.org.

Many local governments, corporations, agencies, military, and others, require all lasers to be

used under the guidelines of ANSI Z136.1. Laser Display guidance can be obtained via the

International Laser Display Association: www.ilda.com.

Laser Classification Class 3R

Red Laser Medium LD/650 nm/100 mW

Green Laser Medium LD/532 nm/30 mW

Beam Diameter <5 mm at aperture

Pulse Data All pulses < 4 Hz (>0.25 sec)

Divergence (each beam) <2 mrad

Divergence (total light) <160 degrees

Laser Power of Each Beam from Aperture* <5 mW

*As measured under IEC measurement conditions for classification.

LASER APERTURE

MODEL: GIGBARMOVE

ITEM CODE: 10051675

FUSE: T 3.15AL A, 250 V

POWER LINKING: 8 A (7 UNITS @ 120 V)

(12

UNITS @ 230 V)

ORIGIN: MADE IN CHINA

USA /

CANADA

POWER: 100-125

VAC, 60 Hz

1.1 A, 81 W

WORLDWIDE

POWER: 100-240 VAC, 50/60 Hz

0.6-1.1 A, 79 W

THIS APPLIANCE MUST BE GROUNDED

CETTE UNITÉ DOIT ÊTRE RELIÉE À LA TERRE

USE ONLY FUSE OF SAME TYPE & RATING

N’UTILISER QUE DES FUSIBLES DU TYPE ET

DE L’AMPÉRAGE INDIQUÉ

NOT FOR HOUSEHOLD USE

IMPROPRE A L’USAGE DOMESTIQUE

DRY LOCATIONS

EMPLACEMENTS SECS

DISCONNECT POWER BEFORE SERVICING

DÉBRANCHER AVANT TOUT ENTRETIEN

FOR INDOOR USE ONLY

USAGE INTÉRIEUR UNIQUEMENT

WORLDWIDE HEADQUARTERS,

SUNRISE, FLORIDA USA

532/650nm

CW, <5mW

WARNING

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

RoHS

IEC/EN 60825-1:2014

6

May 8, 2019

Page 8

Introduction

GigBAR MOVE User Manual Rev. 4

2. Introduction

Product Overview

DMX

Out/In

Fuse

Holder

Power

In Menu

Buttons

LED

Display

Power

Out

Laser

Par 1

IR Sensor

Moving Head 1

Microphone

Strobes (x4)

Back Panel View

Front Panel View

Derby 1 Derby 2

Moving Head 2

Par 2

Page 9

GigBAR MOVE User Manual Rev. 4

Introduction

Product Dimensions

17.7 in

449 mm

43 in

1100 mm

3 in

79 mm

5.7 in

144 mm

5.7 in

144 mm

4.6 in

118 mm

Page 10

Setup

GigBAR MOVE User Manual Rev. 4

3. Setup

AC Power

The GigBAR MOVE has an auto-ranging power supply and it can work with an input voltage range of 100

to 240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

Fuse Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the fuse holder out of the housing.

4. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.

5. Insert the fuse holder back in place and reconnect power.

Power Linking

The product provides power linking via the outlet located in the back of the product. See the diagram below

for further explanation.

Power Linking Diagram

•

Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or fire

.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

Disconnect the product from the power outlet before replacing the fuse.

Always replace a blown fuse with one of the same type and rating.

You can power link up to 7 GigBAR MOVE products on 120 VAC or up to 12 GigBAR MOVE

products on 230 VAC.

The power linking diagram shown above corresponds to the North American version of

the product ONLY! If using the product in other markets, you must consult with the local

Chauvet distributor as power linking connectors and requirements may differ in your

country or region.

Safety cap

Spare fuse holder

(inside safety cap)

Installed fuse

(held by plastic clip)

1st Product 2nd Product 3rd Product

Power

Source Additional

Products

Page 11

GigBAR MOVE User Manual Rev. 4

Setup

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

Orientation

The GigBAR MOVE must be mounted in a position that includes planning for safe laser usage. In addition,

make sure adequate ventilation is provided around the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product

for maintenance and programming.

• Make sure that the structure or surface onto which you are mounting the product can support the

product’s weight (see the Technical Specifications)

• When mounting the product overhead, always use a safety cable. Mount the product securely to a

rigging point, such as an elevated platform or a truss.

•When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

• The bracket adjustment knobs allow for directional adjustment when aiming the product to the

desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the

knobs.

Mounting Diagram

Proper Usage

This product is for overhead mounting only. For safety purposes, Chauvet recommends mounting lighting

effect products on steady elevated platforms or sturdy overhead supports using suitable hanging clamps.

In all cases, use safety cables. Obtain appropriate mounting hardware from your lighting vendor.

International laser safety regulations require that laser products must be operated in the fashion

illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor and

the lowest laser light. Additionally, 3 meters of horizontal separation is required between laser light

and audience or other public spaces.

CAUTION! Use of controls, adjustments, or procedures other than THOSE specified IN

THIS USER MANUAL may result in hazardous radiation exposure.

Safety Cable

(such as CH-05

from Chauvet)

Tripod Mounting

Insertion Point

3 meters

Page 12

Operation

GigBAR MOVE User Manual Rev. 4

4. Operation

This product is not designed for continual use. Make sure there are regular breaks during operation to

maximize the life of the lasers. Always disconnect the GigBAR MOVE from power when not in use.

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to

the Product Overview to see the button locations on the control panel.

Menu Map

Button Function

<MENU> Exits from the current menu or function

<UP> Navigates upwards through the menu list or increases a selected numeric value

<DOWN> Navigates downwards through the menu list or decreases a selected numeric value

<ENTER> Enables the currently displayed menu or sets a selected value into the selected function

Mode Programming Levels Description

AUTO Mode

Mix 1–3 Sets auto mixed effects show

Spots 1 Selects moving heads auto show

Strobe 1 Selects strobe auto show

Laser 1 Selects laser auto show

Derby 1 Selects derby auto show

Par 1 Selects pars auto show

S+SP 1 Selects strobe and moving heads auto show

L+SP 1 Selects laser and moving heads auto show

LS 1 Selects laser and strobe auto show

D+SP 1 Selects derby and moving heads auto show

DS 1 Selects derby and strobe auto show

DL 1 Selects derby and laser auto show

P+SP 1 Selects pars and moving heads auto show

PS 1 Selects pars and strobe auto show

PL 1 Selects pars and laser auto show

PD 1 Selects pars and derby auto show

PS+SP 1

Selects pars, strobe, and moving heads auto show

PL+SP 1

Selects pars, laser, and moving heads auto show

PLS 1

Selects pars, laser, and strobe auto show

PD+SP 1

Selects pars, derby, and moving heads auto show

PDS 1

Selects pars, derby, and strobe auto show

PDL 1

Selects pars, derby, and laser auto show

DLS+SP 1

Selects derby, laser, strobe, and moving heads auto show

PLS+SP 1

Selects pars, laser, strobe, and moving heads auto show

PDS+SP 1

Selects pars, derby, strobe, and moving heads auto show

PDL+SP 1

Selects pars, derby, laser, and moving heads auto show

PDLS 1

Selects pars, derby, laser, and strobe auto show

Speed 0–99 Sets automatic program speed

Page 13

GigBAR MOVE User Manual Rev. 4

Operation

SOUND Mode

Mix 1–3 Sets mixed effects to sound mode

Spots 1 Sets moving heads to sound mode

Strobe 1 Sets strobe to sound mode

Laser 1 Sets laser to sound mode

Derby 1 Sets derby to sound mode

Par 1 Sets pars to sound mode

S+SP 1 Sets strobe and moving heads to sound mode

L+SP 1 Sets laser and moving heads to sound mode

LS 1 Sets laser and strobe to sound mode

D+SP 1 Sets derby and moving heads to sound mode

DS 1 Sets derby and strobe to sound mode

DL 1 Sets derby and laser to sound mode

P+SP 1 Sets pars and moving heads to sound mode

PS 1 Sets pars and strobe to sound mode

PL 1 Sets pars and laser to sound mode

PD 1 Sets pars and derby to sound mode

PS+SP 1

Sets pars, strobe, and moving heads

to sound mode

PL+SP 1

Sets pars, laser, and moving heads

to sound mode

PLS 1

Sets pars, laser, and strobe

to sound mode

PD+SP 1

Sets pars, derby, and moving heads

to sound mode

PDS 1

Sets pars, derby, and strobe

to sound mode

PDL 1

Sets pars, derby, and laser

to sound mode

DLS+SP 1

Sets derby, laser, strobe, and moving heads to sound mode

PLS+SP 1

Sets pars, laser, strobe, and moving heads to sound mode

PDS+SP 1

Sets pars, derby, strobe, and moving heads to sound mode

PDL+SP 1

Sets pars, derby, laser, and moving heads to sound mode

PDLS 1

Sets pars, derby, laser, and strobe

to sound mode

Sensitivity 0–99 Sets sound sensitivity

DMX DMX

3CH

Select the DMX channel17CH

35CH

Address 001–510 Set DMX starting address

Slave Select for slave mode

SYS

IR ON Turns infrared on or off for IRC-6 control

OFF

FOOT ON Turns footswitch control on or off

OFF

PanReverse

ON Enable/disable pan reverse

OFF

TiltReverse ON Enable/disable tilt reverse

OFF

RESET NO Reset to factory defaults

YES

• The DMX value will display in white if not receiving the DMX signal, and will display in

yellow if receiving the DMX signal.

• The menu display will turn off if there is no operation within 60 seconds.

• In DMX mode, the fixture will save the last settings when the DMX signal was lost. When

in Master/Slave mode, it will blackout when the DMX signal is lost.

Mode Programming Levels Description

Page 14

Operation

GigBAR MOVE User Manual Rev. 4

Configuration (Standalone)

Set the product in one of the standalone modes to control without a DMX controller.

Automatic Mixed Effect Mode

To run the GigBAR MOVE in automatic mode, follow the instructions below.

1. Press <MENU> to view the main menu on the display.

2. Use <UP> or <DOWN> until AUTO is highlighted.

3. Press <ENTER>.

4. Use <UP> or <DOWN> to select Mode.

5. Press <ENTER>

6. Use <UP> or <DOWN> to select from the Auto Program options: Mix, Spots, Strobe, Laser,

Derby, Par, S+SP, L+SP, LS, D+SP, DS, DL, P+SP, PS, PL, PD, PS+SP, PL+SP, PLS, PD+SP,

PDS, PDL, DLS+SP, PLS+SP, PDS+SP, PDL+SP, or PDLS.

7. Press <ENTER>.

8. Use <UP> or <DOWN> to select Speed.

9. Press <ENTER>.

10. Use <UP> or <DOWN> to set the automatic program speed from 0–99.

11. Press <ENTER>.

Sound-Active Mixed Effect Mode

To run the GigBAR MOVE in sound-active mode, do the following:

1. Press <MENU> to view the main menu on the display.

2. Use <UP> or <DOWN> until SOUND is selected.

3. Press <ENTER>.

4. Use <UP> or <DOWN> to select Mode.

5. Press <ENTER>

6. Use <UP> or <DOWN> to select from the Auto Program options: Mix, Spots, Strobe, Laser,

Derby, Par, S+SP, L+SP, LS, D+SP, DS, DL, P+SP, PS, PL, PD, PS+SP, PL+SP, PLS, PD+SP,

PDS, PDL, DLS+SP, PLS+SP, PDS+SP, PDL+SP, or PDLS.

7. Press <ENTER>.

Sound Sensitivity

To set the sound sensitivity on the GigBAR MOVE, follow the instructions below.

1. Press <MENU> to view the main menu on the display.

2. Use <UP> or <DOWN> until SOUND is selected.

3. Press <ENTER>.

4. Use <UP> or <DOWN> to select Sensitivity.

5. Press <ENTER>

6. Use <UP> or <DOWN> to set the sound sensitivity from 0–99.

7. Press <ENTER>.

Never connect a product that is operating in any standalone mode to a DMX string

connected to a DMX controller. Products in standalone mode may transmit DMX signals

that could interfere with the DMX signals from the controller.

• The product will only respond to low frequencies of music (bass and drums).

• The laser will black out when in Sound-Active mode after 3 seconds of silence or noise

below the sensitivity setting.

La page charge ...

CHAUVET DJ GigBar Move White DJ Complete Light Set Manuel utilisateur

Ce manuel convient également à

CHAUVET DJ GigBar Move White DJ Complete Light Set Manuel utilisateur

dans d''autres langues

Documents connexes