Sony KV-BZ212M81 Le manuel du propriétaire

Taper
Le manuel du propriétaire

Ce manuel convient également à

Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
© 2006 Sony Corporation
KV-BZ212
2-672-646-11 (2)
M81
M80
Trinitron Color TV
Mode d’emploi
Avant de faire fonctionner cet appareil, lisez attentivement le présent
mode d’ emploi et conservez-le pour toute référence ultérieure.
ﺎﻤﻨﻫار ﻪﭼﺮﺘﻓد
DHU q «Ës dœÊ œ~UÁ¨ œdÇt «MLU « U œX u«Ob Ët MEu d«Ft
FbÈ «Ê «~t œ«bÆ
 
  ,      
GB
Operating Instructions
Before operating the unit, please read this manual thoroughly and retain
it for future reference.
AR
PR
FR
01GB01COV-SOEMME.p65 3/6/06, 10:25 PM1
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
2
Clean the TV with a dry and soft
cloth. Do not use benzine, thinner,
or any other chemicals to clean the
TV. Do not attach anything (e.g.,
adhesive tape, cellophane tape,
glue) on the painted cabinet of the
TV. Do not scratch the picture
tube.
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110 – 240 V AC.
Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.
Install the TV on a stable TV stand
and floor which can support the
TV set weight. Ensure that the TV
stand surface is flat and its area is
larger than the bottom area of the
TV.
Do not plug in too many
appliances to the same power
socket. Do not damage the power
cord.
For children’s safety, do not leave
children alone with the TV. Do not
allow children to climb onto it.
For your own safety, do not touch
any part of the TV, the power cord
and the antenna cable during
lightning storms.
Do not place any objects on the TV.
The apparatus shall not be
exposed to dripping or splashing
and that no objects filled with
liquids, such as vases, shall be
placed on the apparatus.
Do not operate the TV if any liquid
or solid object falls into it. Have it
checked immediately by qualified
personnel only.
Do not block the ventilation
openings of the TV. Do not install
the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not open the cabinet and the
rear cover of the TV as high
voltages and other hazards are
present inside the TV. Refer
servicing and disposal of the TV
to qualified personnel.
Pull the power cord out by the
plug. Do not pull the power cord
itself. Even if your TV is turned
off, it is still connected to the AC
power source (mains) as long as
the power cord is plugged in.
Unplug the TV before moving it
or if you are not going to use it for
several days.
To prevent fire or shock hazard, do
not expose the TV to rain or
moisture.
Your TV is recommended for
home use only. Do not use the TV
in any vehicle or where it may be
subject to excessive dust, heat,
moisture or vibrations.
01GB02WAR-SOEMME.p65 3/6/06, 11:22 PM2
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
3
Securing the TV ............................................................................................................... 4
Getting Started ................................................................................................................ 4
Setting up your TV (Initial Setup) ............................................................................ 5
TV top control, front and rear panels .......................................................................... 7
Connecting optional components ................................................................................ 8
Using the remote control and basic functions .......................................................... 10
Introducing the WEGA GATE navigator .................................................................. 12
Settings Adjustment ................................................................................................. 13
Changing the Picture setting ................................................................................... 14
Changing the Sound setting .................................................................................... 15
Changing the Channel Setup setting ..................................................................... 16
Changing the Setup setting ..................................................................................... 18
Viewing Teletext (KV-BZ212M81 only) ..................................................................... 19
Troubleshooting ............................................................................................................ 20
Specifications .................................................................................................. Back cover
Table of Contents
GB
01GB03TOC-SOEMME.p65 3/6/06, 11:22 PM3
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
4
x Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV. Use only the supplied screws. Use of other screws may damage
the TV.
or
Screw the band to the TV stand and
to the provided hole at the rear of
your TV.
(1) Put a cord or chain through the
clamps.
(2)
Screw one clamp to a wall or pillar
and the other clamp to the provided
hole at the rear of your TV.
20 mm
3.8 mm
screws
clamps band
End
Select
Confirm
b
b
Insert the batteries (supplied) into the remote.
Note
Do not use old or different types of batteries together.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
You can also connect your TV to other optional components (see page 8).
Plug in the power cord, then press ! on the TV to turn it on.
Note
The 1 (standby) indicator flashes green for a few seconds when
turning on the TV. This does not indicate a malfunction.
Set up the TV by following the instructions of the “Initial
Setup” menu (see page 5).
x Getting Started
Step 1
Step 2
Step 3
Step 4
01GB04INS-SOEMME.p65 3/6/06, 11:22 PM4
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
5
Program Sorting/Edit
01
02
03
04
Off
Off
Off
Sorting mode
PROG
SkipLabel
Off01
Exit
Select
Confirm
Program Sorting/Edit
01
02
03
04
Off
Off
Off
Off
Sorting:
Edit:
PROG
SkipLabel
Exit
Select
Confirm
x
Setting up your TV (“Initial Setup”)
When you turn on your TV for the first time, the Initial Setup menu will
appear. You may change the menu language, preset the TV channels
automatically, sort or edit the channels and adjust the picture position using the
buttons on the remote control or TV top control panel.
1
Press V or v to select the desired menu
language, then press
.
The selected menu language appears.
2
Press V or v to select “Yes”, then press to
preset the channels automatically.
The screen will indicate automatic
presetting is in progress.
After all available channels have been tuned
and stored, the Program Sorting/Edit
menu appears automatically on the screen.
To skip automatic channel presetting, select
No, then press
.
If the message No channel found. Please
connect cable/antenna appears, check your
TV connections, then press .
3
The “Program Sorting/Edit” menu enables
you to sort and edit the channels.
a) If you wish to keep the channels in the current
condition, press WEGA GATE to exit.
b) Press V or v to select the program
number with the channel you wish to
change. The selected channel will appear
on the screen.
c) If you wish to store the channels in a
different order:
1) Press b to enter sorting mode.
2) Press V or v to select the new program
number position for your selected
channel, then press B.
End
Select
Confirm
End
Select
Confirm
Program:
TV System: Auto
01
VHF Low
End
continue
01GB04INS-SOEMME.p65 3/6/06, 11:22 PM5
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
6
d) If you wish to edit the channels, press
to change to edit mode.
Press b until the mode that you wish to edit
is highlighted: Label, Skip,
(block symbol).
Then press
.
1) To label, press V or v to select the
alphanumeric characters for the label.
Then press
.
2) To skip the program number, press V or v to
select On. Then press
.
You can skip this program number when
using PROG +/-.
3) To block unwanted program number,
press V or v to select
. Then press .
e) Repeat step b) to d) if you wish to change other
channels.
Press WEGA GATE to go to the next menu.
4
Press B or b to adjust the bars on the top and
bottom of the menu if they are slanted, then
press
(KV-BZ212M81 only).
If no adjustment is necessary, then press
.
5
To prevent this “Initial Setup” menu from
appearing again when you turn on the TV
by pressing !, press V or v to select “No”,
then press
.
To allow this menu to appear again, select
Yes, then press
.
Tip
You can immediately go to the end of the Initial Setup menu by pressing WEGA GATE.
End
Select
Confirm
Select
Confirm
Exit
Select
Confirm
Exit
Select
Confirm
Exit
Select
Confirm
Setting up your TV (“Initial Setup”) (continued)
01GB04INS-SOEMME.p65 3/6/06, 11:23 PM6
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
7
x TV top control, front and rear
panels
Button/Terminal Function Page
1 ! Turn off or turn on the TV. 4
2 Remote control sensor. -
3 Wake Up indicator. 11
3 1 Standby indicator. 4
4 t2 Video input terminal 2. 8
5 PROG +/ Select program number. -
6 2 +/ Adjust volume. -
7 t Select TV or video input. 8
WEGA GATE menu operations
5,6 V,v,B,b Select and adjust items. 12
7
Confirm selected items. 12
8 WEGA GATE Display or cancel WEGA GATE menu. 12
9 8 Antenna input terminal. 8
0 T Monitor output terminal. 8
qa Component video input terminal. 9
qs t1 Video input terminal 1. 8
L
R
2
(MONO)
WEGA GATE
PROG
8
7
6
5
123
L
R
R
1
L
Y
C
B
C
R
(MONO) (MONO)
9
qa
qs
0
L
R
2
4
(MONO)
TV rear panel
TV top control panel
TV front panel
01GB05INS-SOEMME.p65 3/6/06, 11:23 PM7
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
8
x Connecting optional components
Connecting to the video input terminal ( t )
Note
If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the
program number 0 on the TV (see page 17).
TV rear panel
Audio system
R
L
L
R
R
1
L
Y
C
B
C
R
(MONO) (MONO)
VCR
Audio/Video
cable
(not supplied)
Connecting to the monitor output terminal ( T )
TV front panel
L
R
(MONO)
2
L
R
R
1
L
Y
C
B
C
R
(MONO) (MONO)
R
L
R
L
Antenna cable
(not supplied)
VCR
TV rear panel
Audio/Video cable
(not supplied)
Audio/Video cable
(not supplied)
Camcorder
DVD Player
01GB05INS-SOEMME.p65 3/6/06, 11:23 PM8
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
9
DVD player
TV rear panel
Component video
cable
(not supplied)
Audio cable
(not supplied)
L
R
R
1
L
Y
C
B
C
R
(MONO) (MONO)
Y
R
L
C
R
C
B
Connecting to the component video input terminal ( )
Notes
If your DVD player can output interlace and progressive mode signals, select the interlace
output when connecting to (component video input) on your TV. Your TV can receive
either 525i/60Hz or 625i/50Hz interlace signals.
The component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/
PR, Y/Cb/Cr or Y/B-Y/R-Y.
If you select DVD on your TV screen, the signal from the T (monitor output) jacks will not
be output properly. This does not indicate a malfunction.
01GB05INS-SOEMME.p65 3/6/06, 11:23 PM9
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
10
x Using the remote control and basic
functions
TV
1
2
3
4
6
7
8
9
0
5
PROG
A/B
1
2
3
7
4
5
qj
qk
qa
qd
qf
qh
RETURN
WEGA
GATE
6
8
9
0
w;
ql
qg
qs
Button Description Page
1 ?/1 Turn off temporarily or turn on
the TV.
2 a Display the TV program.
3 Jump to last program number
that has been watched for at
least five seconds.
4 PROG +/
Select program number. To select
quickly, press and hold until the
desired program number appears.
5 2 +/ Adjust volume.
8 Not function for your TV.
9 Not function for your TV.
0 Display on-screen information.
qa Mute the sound.
qd t Select TV or video input. 8
qf 0 9 Input numbers. For program
numbers 10 and above, enter the
second digit within two seconds.
ql Not function for your TV.
w;
Select picture mode options: 14
Vivid, Standard, Custom*.
* When the Custom mode is
selected, you can receive the last
adjusted picture settings from
the Picture Adjustment option
in the menu.
WEGA GATE menu operations
6 Confirm selected items. 12
7
WEGA Display or cancel WEGA GATE
GATE menu.
qj
V, v, B , b
Select and adjust items.
qk
RETURN
Return to the previous level.
01GB06AVD-SOEMME.p65 3/6/06, 11:23 PM10
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
11
Button Description Page
Timer operations
qg Set TV to turn on automatically according to the
desired period of time (max. of 12 hours).
The indicator on TV lights up amber once you set
the wake up timer.
If no buttons or controls are pressed for more than one
hour after the TV is turned on using the wake up timer,
the TV automatically goes into standby mode.
qh
Set TV to turn off automatically according to the
desired period of time (max. of one hour and 30 min.).
Teletext operations (green label)
(KV-BZ212M81 only)
, , , ,
All buttons are used for Teletext operations. 19
, , , ,
(red, green,
yellow, blue)
PIP operations
, , V, v, B, b Not function for your TV.
Stereo/bilingual operations
qs A/B Not function for your TV.
(Wake Up Timer)
(Sleep Timer)
01GB06AVD-SOEMME.p65 3/6/06, 11:23 PM11
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
12
01
02
03
04
05
TV
Confirm
Select
End
External Inputs
Confirm
Select
End
Video 1
1
2
DVD
Video 2
Confirm
End
Picture
Color Temperature: Cool
Picture Adjustment
Picture Mode: Vivid
Intelligent Picture: On
Signal Level Indicator:
On
Select
x Introducing the WEGA GATE
navigator
WEGA GATE is a gateway that allows you access to preset TV channels,
connected external inputs and Settings menu.
watch the preset TV
channels (see page 5)
select the inputs for the
connected equipment
(see page 8)
change the settings
of your TV (see
page 13)
How to use WEGA GATE
(1) Press WEGA GATE to display or cancel
the WEGA GATE menu.
Confirm
Select
WEGA GATE
Settings
External Inputs
TV
(3) Press V or v to select the desired item.
(4) Press RETURN to move to the previous
level.
(2) Press (or b) to confirm your selection
or go to the next level.
TV
External Inputs
Settings
Confirm
Select
WEGA GATE
Settings
External Inputs
TV
Confirm
Select
WEGA GATE
Settings
External Inputs
TV
01
02
03
04
05
TV
Confirm
Select
End
01
02
03
04
05
TV
Confirm
Select
End
Tip
The WEGA GATE, and V,v,B,b buttons on the top control panel can also be used for the
operations above.
01GB06AVD-SOEMME.p65 3/6/06, 11:23 PM12
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
13
x Settings Adjustment
You are able to change the settings of your TV from Settings in WEGA GATE
menu.
Press WEGA GATE button to display WEGA GATE menu. Press V or v to select
Settings and press
.
The following is an overview of the items that can be adjusted.
Confirm
End
Picture
Color Temperature: Cool
Picture Adjustment
Picture Mode: Vivid
Intelligent Picture: On
Signal Level Indicator:
On
Select
Picture (see page 14)
Picture Mode: Vivid t Standard t Custom
Picture Adjustment: Picture, Brightness, Color, Hue,
Sharpness, Reset
Color Temperature: Cool t Neutral t Warm
Intelligent Picture: On t Off
Signal Level Indicator: On t Off
Confirm
End
Sound
Select
Balance
Sound (see page 15)
Balance
Confirm
End
Channel Setup
Select
Manual Program
Auto Program
Program Sorting/Edit
Channel Setup (see page 16)
Auto Program
Manual Program
Program: 00 - 99
TV System: B/G t I t D/K
VHF Low/VHF High/UHF
Fine: Auto t Manual
Signal Booster: Auto t Off
Program Sorting/Edit
Confirm
End
Setup
Select
Picture Rotation
Language:
Video Label
Color System: Auto
Factory Settings
English
Setup (see page 18)
Language: English t (Arabic)
Picture Rotation (KV-BZ212M81 only)
Video Label: Video Input, Label
Color System: Auto t PAL t SECAM t NTSC3.58 t
NTSC4.43
Factory Settings: Yes t No
Note
When a feature is dimmed in the menu, it is not selectable.
01GB06AVD-SOEMME.p65 3/6/06, 11:23 PM13
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
14
x Changing the Picture setting
The Picture menu allows you to adjust settings below.
1
Press WEGA GATE and select Settings.
2
Make sure the Picture icon ( ) is selected, then press .
3
Press V or v to select the desired item (e.g., Picture Mode), then press .
Select To
Picture Mode choose either Vivid (bright, contrast and sharp),
Standard (normal) or Custom*.
Color Temperature adjust white color tint.
Choose either Cool (blue tint), Neutral (neutral tint) or
Warm (red tint).
Intelligent Picture optimize picture quality.
Press V or v to select On, then press .
To cancel, select Off, then press .
Signal Level Indicator display the signal level when the Intelligent Picture is
functioning.
Intelligent Picture Signal Level indicator will be displayed,
followed by picture improvement when you change the
program number or the input mode.
red amber green
(weak) (average) (good)
Press V or v to select On, then press .
To cancel, select Off, then press . Intelligent Picture is
still functioning.
* You can adjust the setting to your personal preference in the Picture Adjustment and
Color Temperature options only when the Custom mode is selected.
Adjusting the Picture Adjustment items under Custom
mode
1
Press V or v to select either Picture (contrast), Brightness, Color,
Hue (color tones) or Sharpness, then press
.
Selecting Reset will set your TV to the factory settings.
2
Press V,v,B or b to adjust the setting of your selected item, then press .
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select Custom.
Notes
•“Hue can be adjusted for the NTSC color system only.
Reducing Sharpness can also reduce picture noise.
01GB06AVD-SOEMME.p65 3/6/06, 11:24 PM14
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
15
x Changing the Sound setting
The Sound menu allows you to adjust settings below.
1
Press WEGA GATE and select Settings.
2
Press V or v to select the Sound icon ( ), then press .
Select To
Balance Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
01GB06AVD-SOEMME.p65 3/6/06, 11:24 PM15
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
16
x C
hanging the Channel Setup
setting
The Channel Setup menu allows you to adjust settings below.
1
Press WEGA GATE and select Settings.
2
Press V or v to select the Channel Setup icon ( ), then press .
3
Press V or v to select the desired item (e.g., Auto Program), then press .
Select To
Auto Program preset channels automatically.
Manual Program manually preset desired channels and channels that cannot
be preset automatically (see Presetting channels manually
in page 17).
Program Sorting/Edit
change the order in which the channels appear on the screen,
label the program number, skip the program number and
block unwanted programs (see step 3 of the section Initial
Setup in page 5).
Notes
If you preset a blocked program number, that program number will be unblocked
automatically.
If you sort a blocked program, that program will remain blocked.
01GB07ADJ-SOEMME.p65 3/6/06, 11:24 PM16
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
17
01
Presetting channels manually
1
After selecting Manual Program, select the program
number to which you want to preset a channel.
(1) Make sure Program is selected, then press
.
(2) Press V or v
until the program number you want
to preset appears on the menu, then press
.
2
Select the desired channel.
(1) Make sure either VHF Low, VHF High or UHF is selected, then press
.
(2) Press V or v until the desired channels broadcast appears on the TV screen,
then press .
3
If the sound of the desired channel is abnormal, select the appropriate TV
system.
(1) Press V or v
to select TV System, then press .
(2) Press V or v
until the sound becomes normal, then press .
4
If you are not satisfied with the picture and sound quality, you may be able
to improve them by using the Fine tuning feature.
(1) Press V or v
to select Fine, then press .
(2) Press V or v
to select Manual, then press .
(3)
Press V,v,B or b until the picture and sound quality are optimal, then press .
The + or icon on the menu flashes while tuning.
5
If the TV signal is too strong (picture distorted; picture with lines; signal
interference) or weak (snowy picture), you may be able to improve the
picture quality by setting the Signal Booster feature.
(1) Press V or v
to select Signal Booster, then press .
(2) Press V or v
to select either Off (for picture distorted; picture with lines;
signal interference) or Auto (for snowy picture), then press
.
01GB07ADJ-SOEMME.p65 3/6/06, 11:24 PM17
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
18
x C
hanging the Setup setting
The Setup menu allows you to adjust settings below.
1
Press WEGA GATE and select Settings.
2
Press V or v to select the Setup icon ( ), then press .
3
Press V or v to select the desired item (e.g., Language), then press .
Select To
Language change the menu language.
Press V or v to select either English or (Arabic), then press
.
Picture Rotation
adjust the picture position when it is not aligned with the TV
(KV-BZ212M81 only)
screen.
Press B or b to adjust the picture position, then press .
Video Label label the connected equipment.
(1) Select Video Input and press . Press V or v to select the
input you want to label, then press .
(2) Select Label and press , then press V or v to select the
label options: Video 1/ Video 2/ DVD, VCR, SAT,
Game or Edit*.
* You may edit the video label to your favorite name. Press V or v
to select alphanumeric characters for the label, then press .
Color System select the color system.
Press V or v to select either Auto, PAL, SECAM,
NTSC3.58 or NTSC4.43, then press . Normally, set this to
Auto.
Factory Settings
reset your TV to factory settings.
Press and press V or v to select Yes , then press .
To cancel, select No, then press .
01GB07ADJ-SOEMME.p65 3/6/06, 11:24 PM18
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
19
x Viewing Teletext
B KV-BZ212M81 only
Some TV stations broadcast an information service called Teletext which allows
you to receive various information, such as stock market reports and news.
You can use the buttons on the remote to view Teletext.
To Do this
display a Teletext Press . Each time you press , the
page on the screen changes as follows:
TV picture Teletext t Teletext and TV t TV.
If there is no Teletext broadcast, 100 is
displayed at the top left corner of the
screen.
check the contents Press .
of a Teletext service An overview of the Teletext contents,
including page numbers, appears on the
screen.
select a Teletext page Press the number buttons to enter the
three-digit page number of the desired
Teletext page. If you make a mistake,
reenter the correct page number. To
access the next or previous page, press
or .
hold (pause) a Press to display the symbol at
Teletext display the top left corner of the screen. To
resume normal Teletext viewing, press
.
reveal concealed Press .
information (e.g., To conceal the information, press the
an answer to a quiz) button again.
enlarge the Teletext Press . Each time you press , the
display Teletext display changes as follows:
Enlarge upper half t Enlarge lower
half t Normal size.
stand by for a Teletext (1) Enter the Teletext page number that
page while watching you want to refer to, then press .
a TV program (2) When the page number is displayed,
press to show the text.
select a FASTEXT Press (red, green, yellow and blue)
menu or the colored that corresponds to the desired menu or
boxes page number.
turn off Teletext Press a.
Note
The FASTEXT feature can be used only when the FASTEXT broadcast is available.
(red,
green,
yellow,
blue)
TV
1
2
3
4
6
7
8
9
0
5
PROG
A/B
RETURN
WEGA
GATE
,
01GB07ADJ-SOEMME.p65 3/6/06, 11:24 PM19
Black
Sony KV-BZ212M81 Group B9 (GB, FR, PR, AR)_2-672-646-11 (2)
20
x Troubleshooting
If you find any problem while viewing your TV, you can either use the Factory
Settings function or check the Troubleshooting guide below. If the problem
persists, contact your Sony dealer.
“Factory Settings” function
Press the WEGA GATE button. Choose Settings and go to Setup ( ) menu.
From Setup menu, select Factory Settings. Then select Yes and press
.
Your TV will go blank for a few seconds, then the Initial Setup menu will
appear. Your TV will be set to factory settings, but certain problems may be
solved.
Snowy picture,
noisy sound
Distorted picture,
noisy sound
Good picture,
noisy sound
No picture,
no sound
Good picture,
no sound
Dotted lines or
stripes
Double images
or “ghosts”
No color
Symptom Solutions
Check the antenna cable and connection on the TV, VCR and at the wall
(see page 8).
Check the antenna setup. Contact a Sony dealer for advice.
Display the Channel Setup menu and select Manual Program to preset
the channel again (see page 17).
Display the Channel Setup menu and set the Signal Booster to Auto
from Manual Program (see page 17).
Try using an external booster.
Turn off or disconnect the external booster if it is in use.
Display the Channel Setup menu and set the Signal Booster to Off
from Manual Program (see page 17).
Display the Channel Setup menu and select the appropriate
TV System from Manual Program (see page 17).
Check the power cord, antenna and VCR connections (see page 8).
Press ?/1 (power) to turn on the TV (see page 10).
Press ! (main power) on the TV to turn off the TV for about five seconds,
then turn it on again (see page 7).
Press 2 + to increase the volume level (see page 10).
Press to cancel the muting (see page 10).
Do not use a hair dryer or other equipment near the TV.
Check the antenna setup. Contact a Sony dealer for advice.
Use a highly directional antenna.
Use the fine tuning (Fine) function (see page 17).
Check the antenna setup. Contact a Sony dealer for advice.
Turn off or disconnect the external booster if it is in use.
Display the Picture menu and select Custom from Picture Mode, then
adjust the Color level from Picture Adjustment (
see page 14
).
Display the Setup menu and check the Color System setting
(usually set this to Auto) (see page 18).
Check the antenna setup. Contact a Sony dealer for advice.
01GB07ADJ-SOEMME.p65 3/6/06, 11:24 PM20
Black
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82

Sony KV-BZ212M81 Le manuel du propriétaire

Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues