1. Volume Down:
2. Power:
4. Bluetooth Pairing:
3. Volume Up:
12
Description of MicroPod
Bluetooth buttons
BUTTONS
Press and hold to turn the volume down.
Press and hold simultaneously with VOL- or VOL+ for 5 seconds to do a factory reset of the
speaker.
Press and hold to power on Press once Power off.
Press and hold to turn the volume up.
Press and hold simultaneously with VOL- or VOL+ for 5 seconds to do a factory reset of the
speaker.
Note: MicroPod Bluetooth will be automatically shut off after 10 minutes, when your device is
out of Bluetooth reception range.
Press the pairing button, MicroPod Bluetooth will enter Discoverable Mode(Pairing Mode) for
1 minute, where it will be visible as a Bluetooth device on the list of Bluetooth device on your
phone, PC etc. Simply choose MicroPod Bluetooth on the list to establish the connection.
When entering Pairing Mode 2 short beeps will sound and the blue LED will start blinking fast.
Once connected to a device a single beep will sound. If no connection is made within 1
minute,blue LED will blink fast and 10 minutes later will be automatically shut off.
After 1 minute the speaker will go into Connectable Mode where it will be able to manually
connect to known device. Once your device is connected to MicroPod Bluetooth you can play
your music wireless by choosing MicroPod Bluetooth as the playback source.