Yamaha v4 Manuel utilisateur

m

Operation Manual

EN

Table of Contents

About the Relevant Manuals 23

About the Relevant Manuals.. ................................................................... 23

Component Structure 24

Control surface.......................................................................................24

Digital mixing console..............................................................................31

About RIVAGE PM Editor...........................................................................33

DSP engine.............................................................................................34

I/O rack..................................................................................................36

RY cards.................................................................................................40

HY card..................................................................................................41

Part Names & Functions (CS-R10, CS-R10-S, CSD-R7)

43

Selected Channel section..........................................................................43

INPUT/A.GAIN/SILK/D.GAIN/DELAY.............................................................45

EQUALIZER.............................................................................................47

LPF/HPF.................................................................................................48

DCA/MUTE/INSERT...................................................................................49

DYNAMICS.............................................................................................. 50

MIX/MATRIX SENDS..................................................................................51

UTILITY section.......................................................................................53

SCENE MEMORY section............................................................................55

USER DEFINED KEYS/KNOBS section...........................................................57

Touch Screen section (bay L, bay C).. ......................................................... 59

Channel Strip section (bay L, bay R, bay C)..................................................61

[TOUCH AND TURN] knob/layer selection....................................................64

Front panel of the control surface..............................................................66

Rear panel of the control surface...............................................................68

2

Table of Contents

Precautions regarding using the NETWORK connector..................................74

Part Names & Functions (CS-R5) 75

Selected Channel section..........................................................................75

DYNAMICS.............................................................................................. 76

GAIN......................................................................................................77

EQUALIZER.............................................................................................78

UTILITY section.......................................................................................79

SCENE MEMORY section............................................................................81

USER DEFINED KEYS section......................................................................83

Touch Screen section...............................................................................85

Channel Strip section...............................................................................87

Front panel.............................................................................................93

Rear panel..............................................................................................94

Basic operations on the panel 98

Basic touch screen operations...................................................................98

Basic operations on the top panel..............................................................99

Shut down (power-off procedure)............................................................100

Other convenient functions.....................................................................101

On-screen user interface.........................................................................102

Viewing a touch screen...........................................................................106

Entering names.....................................................................................112

Using tool buttons.................................................................................114

Resetting parameters to default..............................................................116

Comparing two settings..........................................................................117

Using libraries.......................................................................................119

Recalling a preset from a library..............................................................120

Library screen (Recall).. ......................................................................... 121

Storing setting data in a library...............................................................122

Library screen (Store).. .......................................................................... 123

Deleting setting data from a library..........................................................124

3

Table of Contents

Library screen (Delete)...........................................................................125

Pair setting...........................................................................................126

Setting or defeating pairing on the SELECTED CHANNEL VIEW screen............129

Screen Overview 131

About the SELECTED CHANNEL VIEW screen...............................................131

About the OVERVIEW screen....................................................................145

Quick Guide 154

Basic system.........................................................................................154

Installing optional cards.........................................................................156

Assigning the Unit ID..............................................................................162

Connecting the devices...........................................................................164

Turning on the power to the system.........................................................166

Setting the word clock.. ......................................................................... 167

Assigning channels to the TWINLANe network............................................168

Patching the input ports.........................................................................173

Patching the output ports.......................................................................175

Specifying the analog gain for the HA (head amp).......................................177

Routing a signal to the STEREO bus.......................................................... 178

Network and Connections 182

About the TWINLANe Network.................................................................182

Connecting a TWINLANe network card......................................................183

Signal flow within the RPio.....................................................................185

About Connections.................................................................................187

About Dual Console................................................................................190

About DSP mirroring..............................................................................191

Verifying the DSP mirroring operation......................................................194

About Dante..........................................................................................195

Connecting to a Dante network................................................................196

DSP mirroring function in the Dante audio network....................................197

4

Table of Contents

Word clock in the RIVAGE PM series..........................................................198

About the sampling rate converter (SRC).. ................................................199

About connecting a computer..................................................................200

Bay 201

About bays............................................................................................201

Faders and fader layers.......................................................................... 202

Selected channel concepts......................................................................206

Bay Link...............................................................................................210

System Setup 213

About the SETUP screen..........................................................................213

SYSTEM SETUP field (SETUP screen).........................................................214

USER SETUP field (SETUP screen).............................................................216

FILE field (SETUP screen)........................................................................217

MAINTENANCE field (SETUP screen)..........................................................218

CONSOLE STATUS field (SETUP screen).....................................................219

PANEL SETTINGS field (SETUP screen).. ....................................................221

SYSTEM CONFIG.....................................................................................222

SYSTEM CONFIG Online settings...............................................................223

Synchronizing the settings data between components................................224

DEVICE SYNC screen...............................................................................225

Selecting and setting up the components..................................................226

SYSTEM popup window...........................................................................227

HY slot popup window............................................................................229

Assigning the channels (that will be used by the I/O racks) to the TWINLANe

network...............................................................................................231

HY SLOT popup window (Online)..............................................................233

I/O rack settings popup window...............................................................235

Assign the channels that will be used by the DSP engines to the TWINLANe

network...............................................................................................237

DSP popup window................................................................................238

5

Table of Contents

TWINLANe CONFIGURATION popup window...............................................240

SYSTEM CONFIG [CS1] popup window.......................................................242

Editing the internal parameters of each component.. ................................. 243

Editing the internal parameters of the RY16-ML-SILK..................................244

Editing the internal parameters for OMNI OUT of the RY16-DA and control

surface.................................................................................................246

Editing the internal parameters for INPUT 1-8/INPUT 9-16 of the RY16-AE, and

AES/EBU INPUT 1-8 on the rear panel of the control surface.........................248

Editing the internal parameters for OUTPUT 1-8/OUTPUT 9-16 of the RY16-AE,

and AES/EBU OUTPUT 1-8 on the rear panel of the control surface................ 250

Editing the internal parameters of the MY CARD INPUT.. ............................. 252

Editing the internal parameters of the MY CARD OUTPUT.. .......................... 253

Editing the internal parameters for OMNI IN of the control surface...............255

Settings for the HY128-MD card.. ............................................................. 257

SYSTEM CONFIG Offline settings.. ............................................................ 261

Mounting an I/O rack (offline)..................................................................262

SYSTEM CONFIG popup window (Offline)...................................................264

Specifying the type and number of cards (Offline)......................................265

I/O rack settings popup window...............................................................266

RY CARD SELECT popup window...............................................................269

MY CARD SELECT popup window..............................................................270

HY CARD SELECT popup window.. ............................................................ 271

DELAY COMPENSATION...........................................................................272

DELAY COMPENSATION popup window.. ................................................... 273

Word Clock.. .........................................................................................275

WORD CLOCK popup window (Master mode)..............................................276

Network...............................................................................................278

NETWORK screen: FOR MIXER CONTROL tab.. ............................................279

NETWORK screen: IMMERSIVE SOUND tab.. ............................................... 281

Dante audio network settings..................................................................282

HY SLOT window.. ................................................................................. 283

DANTE SETUP popup window.. ................................................................285

6

Table of Contents

Dante messages.....................................................................................288

Mounting an I/O rack..............................................................................293

DEVICE SELECT popup window.. .............................................................. 294

DEVICE LIST.. ........................................................................................ 295

SUPPORTED DEVICE...............................................................................296

DVS or MANUAL.. ................................................................................... 297

Patching an I/O rack...............................................................................298

Remotely controlling an I/O rack..............................................................301

HY SLOT window.. ................................................................................. 303

DANTE I/O DEVICE [I/O] screen................................................................. 305

BUS SETUP (Basic settings for MIX buses and MATRIX buses)........................307

BUS SETUP page....................................................................................309

SEND POINT (INPUT) (Specifying the send point for each input channel)........310

SEND POINT page...................................................................................311

Mix minus.............................................................................................313

BUS SETUP popup window......................................................................315

MIX MINUS OWNER popup window........................................................... 316

SEND indications for a mix minus bus.. ..................................................... 317

SURROUND SETUP (specifying surround mode)..........................................318

SURROUND SETUP screen.......................................................................320

SELECTED CHANNEL VIEW screen (SURROUND).. ........................................ 321

OVERVIEW screen (SURROUND).. ............................................................. 322

SURROUND PAN 1CH screen.. .................................................................. 323

SURROUND PAN CH1-36/ CH37-72/ CH73-108/ CH109-144 screen...................325

DOWNMIX screen...................................................................................326

SURROUND MONITOR screen...................................................................327

SURROUND MONITOR SETTINGS popup window.........................................329

MONITOR SOURCE popup window (SURROUND).........................................331

MONITOR SOURCE popup window (SURROUND).........................................332

SURROUND CUE SETTING popup window.. ................................................ 333

PHONES popup window..........................................................................334

7

Table of Contents

Patching 335

Input channel I/O unit section..................................................................335

Input channel mixing engine section.. ...................................................... 337

Patching the input ports.........................................................................342

Display when patching conflicts between engines......................................343

INPUT patch window..............................................................................346

Output channel mixing engine section......................................................348

Output channel I/O unit section...............................................................354

Patching the output ports.......................................................................355

OUTPUT patch window...........................................................................356

Changing the name................................................................................358

PATCH/NAME screen...............................................................................359

NAME/ICON EDIT popup window.. ............................................................360

Port to port...........................................................................................361

PORT-PORT patch window......................................................................363

PORT NAME tab.. ................................................................................... 364

SUB IN..................................................................................................366

Monitor 368

About monitoring..................................................................................368

Using the Monitor function (top panel).. ................................................... 370

Using the Monitor function.. ................................................................... 371

Monitor sources.....................................................................................373

MONITOR screen....................................................................................374

MONITOR SETTINGS popup window..........................................................376

MONITOR SOURCE popup window............................................................379

MONITOR SOURCE SELECT popup window (INPUT).....................................380

MONITOR SOURCE SELECT popup window (OUTPUT)..................................381

MONITOR SOURCE SELECT popup window (DIRECT INPUT)..........................382

INPUT PATCH popup window...................................................................383

Inserting a plug-in into monitor signals.. .................................................. 384

8

Table of Contents

MONITOR SETTINGS popup window (insert).. ............................................ 385

MONITOR INSERT popup window.............................................................386

INSERT MOUNT screen............................................................................387

About cue.............................................................................................388

About Cue mode and Solo mode...............................................................391

About cue/solo groups............................................................................392

CUE OPERATION mode............................................................................395

Using the Cue function.. ......................................................................... 396

MONITOR screen (cue)............................................................................398

CUE popup window................................................................................400

CUE SETTINGS popup window.. ............................................................... 403

OUTPUT PATCH popup window................................................................404

Using the Solo function...........................................................................405

SOLO SAFE popup window.. .................................................................... 407

About oscillators.. ................................................................................. 409

Using the oscillators.. ............................................................................ 410

Destination of oscillator signals...............................................................411

MONITOR screen (oscillator).. ................................................................. 412

OSCILLATOR popup window....................................................................413

About talkback......................................................................................416

Using talkback (top panel)......................................................................417

Using talkback...................................................................................... 418

MONITOR screen (talkback).. .................................................................. 420

TALKBACK SETTINGS popup window.. ...................................................... 422

TALK GROUPS popup window..................................................................425

TALKBACK ASSIGN popup window............................................................426

About PHONES.. .................................................................................... 427

Using PHONES.......................................................................................428

MONITOR screen (PHONES).....................................................................429

PHONES popup window..........................................................................430

Using RTA.............................................................................................432

Using a popup window dedicated to the RTA..............................................433

9

Table of Contents

MONITOR screen (RTA)........................................................................... 434

RTA popup window................................................................................435

Using the HPF/EQ popup window for the channel parameters......................437

Using the GEQ popup window for the inserted GEQ.....................................438

Using the PEQ popup window for the inserted PEQ.....................................439

Meters 440

Meter area............................................................................................440

Operating the METER screen.. ................................................................. 442

CH Parameter 447

About GAIN/SILK....................................................................................447

Controlling GAIN/SILK via the Selected Channel section(CS-R10, CSR10- S, CSD-

R7) ......................................................................................................448

Controlling GAIN via the Selected Channel section (CS-R5).. ........................ 450

Controlling GAIN/SILK via the OVERVIEW screen.........................................452

GAIN/SILK popup window.. .....................................................................453

Controlling GAIN/SILK via the SELECTED CHANNEL VIEW screen.. ................. 455

Signal level that flows on the TWINLANe network when gain compensation is

on........................................................................................................456

About EQ..............................................................................................457

EQUALIZER section(CS-R10, CSR10- S, CSD-R7) ..........................................458

Controlling the EQ via the Selected Channel section (CS-R10, CSR10- S, CSD-

R7).. .................................................................................................... 460

EQUALIZER(CS-R5).................................................................................461

Controlling the EQ via the Selected Channel section (CS-R5)........................463

Controlling the EQ via the OVERVIEW screen..............................................464

Controlling an EQ via the SELECTED CHANNEL VIEW screen..........................465

EQ popup window (CH 1–72, CH 73–144, MIX, MTRX/ST)...............................466

EQ popup window (1ch)..........................................................................467

Touch EQ screen....................................................................................471

About dynamics.....................................................................................473

10

Table of Contents

DYNAMICS section..................................................................................474

Controlling a dynamics processor via the Selected Channel section..............475

Controlling a dynamics processor via the OVERVIEW screen.........................476

Dynamics fields.....................................................................................477

Controlling a dynamics processor via the SELECTED CHANNEL VIEW screen....478

DYNAMICS 1/2 popup window (1CH).. ....................................................... 479

DYNAMICS 1/2 popup window (CH 1-72, CH 73-144, MIX, MTRX/ST)................482

About insert..........................................................................................484

Using the Selected Channel section to make INSERT settings (only for CS-R10,

CS-R10-S, CSD-R7).. ............................................................................... 485

INSERT section......................................................................................487

Using the OVERVIEW screen to make INSERT settings..................................488

Using the SELECTED CHANNEL VIEW screen to make INSERT settings.. .......... 489

INSERT screen.......................................................................................490

OUTBOARD screen.. ...............................................................................491

INSERT/D.OUT popup window (1CH).........................................................492

INSERT/D.OUT popup window (12CH INSERT 1, 12CH INSERT 2)....................493

Inserting an external device into a channel.. ............................................. 494

Directly outputting an input channel........................................................496

INSERT/D.OUT popup window (1CH/D.OUT)...............................................498

INSERT/D.OUT popup window (12CH/D.OUT).............................................499

Patching multiple Direct Outs simultaneously...........................................500

DIRECT OUT page...................................................................................501

About delay.. ........................................................................................503

DELAY section(CS-R10, CSR10- S, CSD-R7) .................................................504

Controlling the delay via the Selected Channel section(CS-R10, CSR10- S, CSD-

R7) ......................................................................................................505

Controlling the delay via the OVERVIEW screen..........................................506

Controlling the delay via the SELECTED CHANNEL VIEW screen.....................507

DELAY popup window (12ch)...................................................................508

DELAY popup window (CH 1-72, CH 73-144, MIX, MTRX/ST).. ........................ 510

DELAY SCALE popup window.. ................................................................. 511

11

Table of Contents

DELAY TIME popup window.....................................................................512

Using SENDS TO.....................................................................................513

Using SENDS FROM.. .............................................................................. 515

MIX/MATRIX SEND section(CS-R10, CSR10- S, CSD-R7) ................................516

Using the Selected Channel section to make send level settings(CS-R10, CSR10-

S, CSD-R7) ............................................................................................518

SENDS TO popup window........................................................................519

SENDS FROM popup window.. ................................................................. 521

Using the faders to adjust the sends (SENDS ON FADER mode)......................523

SENDS ON FADER popup window..............................................................524

Using the Touch Screen section to make send level settings (CS-R5).. ........... 525

SENDS/USER DEFINED KNOB popup window..............................................527

Using the Quick data copy function..........................................................529

Operating the Quick Data Copy function from the OVERVIEW screen or SENDS

TO/SENDS FROM popup windows.............................................................530

PARAMETER COPY popup window.. .......................................................... 531

Operating the Quick Data Copy function from the HPF/EQ and DYNAMICS 1/2

popup windows.....................................................................................532

PARAMETER SET popup window...............................................................533

Operating the Quick Data Copy function from the SELECTED CHANNEL VIEW

and TO STEREO popup windows...............................................................534

PARAMETER SET popup window...............................................................535

Controlling via the TO STEREO section......................................................536

TO STEREO section.................................................................................537

ST mode and LCR mode...........................................................................538

TO STEREO popup window......................................................................540

Signal flow.. ......................................................................................... 543

SIGNAL FLOW popup window...................................................................544

Channel Job 546

About DCA/Mute groups library................................................................546

About DCA.. .......................................................................................... 547

12

Table of Contents

Assigning channels to a DCA (Selecting the channels that will belong to a

specific DCA).........................................................................................548

Assigning channels to a DCA (Selecting the DCAs to which a specific channel

will belong).. ........................................................................................ 549

Using DCAs............................................................................................550

Viewing the list of DCA status on the OVERVIEW screen.. ............................. 551

Using DCAs............................................................................................552

DCA ROLL-OUT.. .................................................................................... 553

DCA GROUP ASSIGN window (ALL DCA).. ................................................... 554

DCA ASSIGN popup window.....................................................................555

DCA/MUTE ASSIGN window (1CH).............................................................556

About mute groups.. .............................................................................. 557

Assigning channels to a mute group (Selecting the channels that will belong to

a specific mute group)............................................................................558

Assigning channels to a mute group (Selecting the mute group to which a

specific channel will belong).. .................................................................560

Temporarily defeating the Mute function..................................................561

MUTE GROUP ASSIGN window (ALL MUTE).................................................562

DCA/MUTE ASSIGN window (1CH).............................................................564

Channel link..........................................................................................565

Channel link operations..........................................................................566

CH LINK popup window.. ........................................................................ 567

Temporary link.. ................................................................................... 568

Configuring a temporary channel link.......................................................569

Copying channel parameters...................................................................570

CH COPY popup window.. ....................................................................... 572

CH COPY PRESET popup window..............................................................574

Moving channel parameters....................................................................576

CH MOVE popup window.........................................................................578

Initializing channel parameters...............................................................579

CH DEFAULT popup window.. .................................................................. 580

Parameters to be copied.........................................................................581

13

Table of Contents

GEQ/PEQ/Automixer 584

Graphic EQ, parametric EQ and Automixer.. .............................................. 584

About using a graphic EQ (GEQ)................................................................585

About using a parametric EQ (PEQ)...........................................................586

About Automixer................................................................................... 587

DSP resource management for GEQ..........................................................588

Inserting a GEQ/PEQ into a channel via the Selected Channel section............590

INSERT screen.......................................................................................592

The MOUNT GEQ/PEQ screen.. ................................................................. 593

GEQ ASSIGNMENT popup window.............................................................594

Inserting a GEQ/PEQ into a channel via the OVERVIEW screen.......................595

Inserting a GEQ/PEQ into a channel via the SELECTED CHANNEL VIEW screen

(CS-R10, CS-R10-S, CSD-R7).....................................................................596

Using the 31BandGEQ.............................................................................598

GEQ/PEQ EDIT screen.. ........................................................................... 600

Using the Flex15GEQ..............................................................................602

Using the 8BandPEQ...............................................................................604

GEQ/PEQ EDIT screen (8BandPEQ)............................................................605

About Automixer................................................................................... 608

Theory of Automixer operation................................................................609

Inserting Automixer into a channel.. ........................................................ 610

GEQ RACK screen...................................................................................611

GEQ MOUNT popup window.....................................................................612

GEQ RACK screen...................................................................................613

Controlling the Automixer parameters.. ................................................... 614

Plug-ins 618

About plug-ins.......................................................................................618

Using plug-ins.......................................................................................623

PLUG-IN RACK page of the RACK&REC screen.............................................624

RACK MOUNT popup window...................................................................625

14

Table of Contents

PLUG-IN ASSIGNMENT popup window.......................................................626

Plug-in screen.......................................................................................627

Controlling the plug-in parameters..........................................................628

Controlling the REV-X plug-in parameters.................................................631

Controlling the SP2016 parameters..........................................................634

Controlling the VSS4HD plug-in parameters.. ............................................ 637

Main page.. .............................................................................................................................................................................637

Color page.. ............................................................................................................................................................................640

Controlling the NonLin2 plug-in parameters..............................................642

Controlling the Analog Delay plug-in parameters....................................... 644

Controlling the Max100 plug-in parameters...............................................646

Controlling the Dual Phaser plug-in parameters.........................................647

Controlling the Vintage Phaser plug-in parameters.. ..................................649

Controlling the H3000 Live plug-in parameters..........................................650

Controlling the Rupert EQ 773 plug-in parameters.. ................................... 652

Controlling the Rupert EQ 810 plug-in parameters.. ................................... 653

Controlling the Portico 5033 plug-in parameters........................................655

Controlling the EQ-1A plug-in parameters.................................................656

Controlling the Equalizer601 plug-in parameters.......................................657

Controlling the Dynamic EQ plug-in parameters.........................................659

Controlling the Dynamic EQ4 plug-in parameters.......................................662

Controlling the Rupert Comp 754 plug-in parameters.. ............................... 664

Controlling the Rupert Comp 830 plug-in parameters.. ............................... 667

Controlling the Portico 5043 plug-in parameters........................................669

Controlling the Portico 5045 plug-in parameters........................................670

Controlling the U76 plug-in parameters....................................................671

Controlling the Opt-2A plug-in parameters................................................672

Controlling the Comp276 plug-in parameters.. ..........................................673

Controlling the Buss Comp 369 plug-in parameters.....................................674

Controlling the MBC4 plug-in parameters..................................................678

Controlling the DaNSe plug-in parameters.. .............................................. 681

Controlling the OpenDeck plug-in parameters...........................................683

15

Table of Contents

Using the Tap Tempo function.................................................................685

Effects and tempo synchronization..........................................................688

Recording 690

2-track USB recorder..............................................................................690

Recording audio to a USB flash drive.. ......................................................691

RECORDER screen..................................................................................695

Playing back audio files from a USB flash drive..........................................697

RECORDER screen..................................................................................699

Playback mode pattern.. ........................................................................ 701

Editing the title list................................................................................702

RECORDER screen..................................................................................704

Multitrack recording and virtual sound check............................................705

Signal flow during a virtual sound check (VSC)...........................................708

Signal flow for the USB memory recorder..................................................709

Assigning channels to the input/output of the recorder...............................710

RECORDER screen..................................................................................711

INPUT PATCH popup window...................................................................713

OUTPUT PATCH popup window................................................................714

Virtual sound check.. ............................................................................. 715

About Dante..........................................................................................716

Patching for multitrack recording and virtual sound check..........................717

RECORDING PATCH screen.. .................................................................... 718

Recording or playing back using a DAW on the computer.............................720

Configuring Dante Accelerator.................................................................721

Configuring a Dante Virtual Soundcard.....................................................722

Configuring Dante Controller.. ................................................................723

Setting up DAW software.. ...................................................................... 724

Audio recording and playback.. ...............................................................725

Scene memory 726

About the conceptual memory diagram.. .................................................. 726

16

Table of Contents

About scene memories.. ......................................................................... 728

Using the keys in the SCENE MEMORY section.. .......................................... 731

Storing scenes (Using the keys in the SCENE MEMORY section).....................733

SCENE STORE screen..............................................................................735

Automatic suggestion of scene numbers and names.. ................................. 737

Updating scenes (Using the keys in the SCENE MEMORY section).. ................ 738

Recalling scenes (Using the keys in the SCENE MEMORY section).. ................ 739

SCENE field...........................................................................................741

Storing scenes (Using the SCENE LIST screen)............................................742

SCENE LIST screen.. ............................................................................... 744

Recalling scenes (Using the SCENE LIST screen).. ....................................... 746

Using USER DEFINED keys to recall a scene (Direct Recall function)...............747

Sorting scene memories.. ....................................................................... 750

SCENE LIST screen.. ............................................................................... 751

About editing scene memories.................................................................752

SCENE LIST screen.. ............................................................................... 753

Deleting a scene (DELETE).......................................................................755

Duplicating a scene (DUPLICATE).. ........................................................... 756

Modifying the scene number and title (RENAME)........................................757

About the Focus function........................................................................758

Using the Focus function.........................................................................759

FOCUS field...........................................................................................761

SCENE SETUP (FOCUS) popup window......................................................762

Using the Fade function..........................................................................766

FADE TIME field.. ................................................................................... 767

SCENE SETUP (FADE TIME) popup window.................................................768

Outputting a control signal to an external device in tandem with scene recall

(GPI OUT).. ........................................................................................... 769

GPI field............................................................................................... 771

Playing back an audio file in tandem with scene recall (PLAYBACK LINK).. ..... 772

PLAYBACK LINK field..............................................................................774

PLAYBACK LINK popup window................................................................775

17

Table of Contents

Using the Global Paste function...............................................................776

GLOBAL PASTE screen.. .......................................................................... 778

SCENE SELECT popup window.. ............................................................... 782

About the Recall Safe function.................................................................783

Using the Recall Safe function................................................................. 784

RECALL SAFE screen...............................................................................785

Creating an event list.............................................................................788

EVENT LIST screen.. ...............................................................................789

EVENT LIST EDIT popup window...............................................................792

Using MANUAL to recall scenes from an event list.......................................793

EVENT LIST screen.. ...............................................................................794

About the Isolate function.......................................................................795

Using Preview mode.. ............................................................................ 796

Using Preview mode (Using the keys in the SCENE MEMORY section）...........797

Using Preview mode (Using the SCENE LIST screen)....................................798

About the functions in Preview mode.. ..................................................... 799

OVERLAY 801

About the Overlay function.....................................................................801

Selected Channel section（ OVERLAY）.. .................................................. 802

Controlling the Overlay function using the keys and knobs on the top panel.. 806

Controlling the Overlay function from the touch screen..............................807

OVERLAY SETTING screen........................................................................808

Example of panel and touch screen indication while Overlay is enabled.. ...... 810

File 811

SAVE/LOAD.. ......................................................................................... 811

Data handled by a settings file.................................................................812

Saving the RIVAGE PM series’s settings on a USB flash drive.........................814

SAVE SELECT screen...............................................................................816

Loading a file from a USB flash drive.........................................................819

LOAD SELECT screen.. ............................................................................ 822

18

Table of Contents

LOAD SELECT screen.. ............................................................................ 824

LOAD SELECT screen.. ............................................................................ 825

About loading........................................................................................828

Editing the files saved on the USB flash drive.............................................829

SAVE/LOAD popup window......................................................................830

Sorting files and editing file names/comments...........................................832

Sort buttons located at the top of the file list.............................................833

Copying and pasting a file.......................................................................834

Deleting a file........................................................................................835

Creating a directory...............................................................................836

Exporting a CSV file................................................................................837

CSV EXPORT/IMPORT popup window........................................................839

Theatre Mode 840

Theatre mode........................................................................................840

How to configure the Theatre mode settings.. ........................................... 841

How to configure the Theatre mode settings for DSP engines.......................843

SELECTED CHANNEL VIEW screen (Theatre mode).......................................844

Added indicators in Theatre mode............................................................845

OVERVIEW screen.. ................................................................................ 846

How to configure the actor library settings.. .............................................847

Actor library screen.. ............................................................................. 848

User Setup 850

Preference settings................................................................................850

SURFACE SETTINGS1..............................................................................851

SURFACE SETTINGS2..............................................................................853

SCREEN SETTINGS..................................................................................855

MISC....................................................................................................857

Channel Strip section: Using the CUSTOM [1]/[2] keys (CS-R10, CSD-R7)........858

Channel Strip section: Using the [CUSTOM] keys (CS-R5).............................859

Custom fader banks and master faders.....................................................860

19

Table of Contents

CUSTOM FADER BANK popup window.. ..................................................... 862

USER DEFINED KNOBS section.. ...............................................................864

Assigning a function to a USER DEFINED knob............................................865

USER DEFINED KNOBS popup window.......................................................867

Functions that can be assigned to the USER DEFINED knobs.........................868

Channel Strip section.............................................................................872

Assigning a function to a channel strip encoder..........................................874

Using the USER DEFINED keys section (CS-R10, CSD-R7)..............................877

Using the USER DEFINED keys section (CS-R5)............................................878

Assigning a function to a USER DEFINED key..............................................880

Modifying the contents displayed for the USER DEFINED keys......................881

USER DEFINED KEYS popup window.. ....................................................... 882

USER DEFINED KEY LABEL popup window (CS-R10, CSD-R7).........................884

USER DEFINED KEY LABEL popup window (CS-R5).......................................885

Functions that can be assigned to the USER DEFINED keys...........................886

Using the Alternate function.. ................................................................. 895

MIDI/GPI 896

About MIDI............................................................................................896

Basic MIDI Settings.. .............................................................................. 897

MIDI/GPI window (MIDI SETUP page).. ...................................................... 899

MIDI SETUP popup window.. ................................................................... 901

Using Program Changes to recall scenes.. ................................................. 902

MIDI/GPI window (PROGRAM CHANGE page)..............................................905

MIDI PROGRAM CHANGE popup window....................................................906

Using Control Changes to control parameters............................................908

MIDI PROGRAM CHANGE popup window....................................................910

MIDI/GPI window (CONTROL CHANGE page)...............................................911

About GPI.............................................................................................912

Using GPI IN..........................................................................................914

GPI page...............................................................................................916

Using GPI OUT.......................................................................................917

20

Table of Contents

La page charge ...

Yamaha v4 Manuel utilisateur

Yamaha v4 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents