Haier BC100GS Manuel utilisateur

Beverage Center

Réfrigérateur / Congélateur

Refrigerado / Congelador

User Manual

Model # BC100GS

Guide de l’Utilisateur

Modéle # BC100GS

Manual del Usuario

Para Modelo de # BC100GS

Quality

n

Innovation

n

Style

IMPORTANT SAFEGUARDS

When using this applaince, always exercise basic safety

precautions, including the following:

1) Read all of the instructions before using this appliance.

2) Use this appliance only for its intended purposes as described in this

use and care guide.

3) This appliance must be properly installed in accordance with the instal-

lation instruction before it is used. See grounding instructions in the

installation section.

4) Never unplug your beverage center by pulling on the power cord.

Always grasp the plug firmly and pull straight out from the outlet.

5) Unplug your beverage center before cleaning or before making any

repairs. Note: If for any reason this product requires service, we strong-

ly recommend that a certified technician performs the service.

6) Repair or replace immediately, all electric power cords that have

becomefrasyed or otherwise damaged. Do not use a cord that shows

cracks or abrasion damage along its length, the plug or the connector

end.

7) This appliance is designed built-in use only in an enclosed cabinet.

8) If your old beverage center is not being used, we recommend that you

remove the door and leave the shelves in place. This will reduce possi-

bility of danger to children.

9) Do not operate your beverage center in the presence of explosive

fumes.

10) Do not store foods in beverage center as interior temperature may not

be cool enough to prevent spoilage or may cause bacteria growth.

11) Cabinet edges along stamp/cut-out areas may be sharp. Please avoid

placing hands, ﬁngers, or other appendages near these areas.

12) This appliance is not intended for use by young children or inﬁrm

persons without supervision. Young children should be supervised to

ensure they do not play with the appliance.

NOTE: Ambient operating temperature is between 55˚-90˚F.

SAVE THESE INSTRUCTIONS

DANGER

Risk of child entrapment. Before you throw away your old

beverage center, take off the doors. Leave the shelves in

place so that children may not easily climb inside.

1

English

2

English

Staple your receipt to your manual.

You will need it to obtain warranty service.

Thank you for using our product.

This easy-to-use manual will guide

you in getting the best use of your

beverage center.

Remember to record the model and

serial number. They are on a label

in back of the beverage center.

Model Number

Serial Number

Date of Purchase

TABLE OF CONTENTS

PAGE

IMPORTANT SAFEGUARDS ....................................................................1

PARTS AND FEATURES ...........................................................................3

INSTALLING YOUR BEVERAGE CENTER .............................................4-7

Unpacking your Beverage Center ................................................................4

Leveling your Beverage Center ....................................................................4

Installation Limitations .................................................................................4

Unit Dimensions .........................................................................................5

Electrical Requirements ...............................................................................5

Use of Extension Cords ...............................................................................5

Anti-tip Bracket Installation ..........................................................................6

Door Reversal .........................................................................................7-8

BEVERAGE CENTER FEATURES AND USE .........................................9-10

Initial Set up ..............................................................................................9

Temperature Adjustment ..............................................................................9

Sabbath Mode ..........................................................................................9

Alarm System ............................................................................................9

Capacity ...................................................................................................9

Shelving ..................................................................................................10

˚F/˚C Conversion .....................................................................................10

Interior Light ............................................................................................10

Power Button ...........................................................................................10

Normal Operating Sounds ........................................................................10

PROPER BEVERAGE CENTER CARE AND CLEANING ..........................11

Cleaning and Maintenance .......................................................................11

Power interruptions...................................................................................11

Vacation & Moving care ...........................................................................12

TROUBLESHOOTING ............................................................................12

WARRANTY ..........................................................................................13

3

1. LED Temperature Dispay

2. Temperature Adjustment (up/down)

3. Temperature Set Button

4. °C and °F Conversion

5. Interior Light Button

6. Power Button

7. Door Handle

8. Glass Door

9. Light Switch

10. Front Cover (Toe Kick)

11. Adjustable Leveling Leg

12. Bottom Rack

13. Fold Away Shelf

14. Glass Shelf

English

Parts And Features

1

14

11

12

10

9 8 7

13

2

3 4 5 6

4

English

Installing Your Beverage Center

Unpacking Your Beverage Center

1. Remove all packaging material. This includes the foam base and all adhesive

tape holding the beverage center accessories inside and outside.

2. Inspect and remove any remains of packing, tape or printed materials before

powering on the beverage center.

Leveling Your Beverage Center

• Your beverage center has four leveling legs whch are located in the front and rear

corners. After properly placing your beverage center in its finals position, you can

level it.

• Leveling legs can be adjusted by turning them clockwise to raise your beverage

center or by turning them counterclockwise to lower your beverage center. The

beverage center door will close easier when the leveling legs are extended.

Note: If your beverage center has been titlted for any reason, wait 24 hours before

plugging it in.

Install Limitations

• Do not install your beverage center in any location not properly insulated or

heated e.g. garage etc. Your beverage center was not designed to operate in

temperature settings below 55˚ Fahrenheit.

• Select a suitable location for the beverage center on a hard, even surface away

from direct sunlight or heat source e.g. radiotors, baseboard heaters, cooking

appliances etc. Any floor unevenness should be corrected with the leveling legs

located on the front and rear botto m corners of the beverage center.

• Built-in beverage center need to be ventilated from the front. This feature allows

the unit to be built-in in an enclosed area. The bottom front grill should be clear of

all obstructions. This is absolutely necessary for the air to circulate and for the unit

to operate efficiently. The dimensions for installation are as follows (WxDxH).

Note: Remove the upper hinge cover before built-in the beverage center.

Unit Dimensions

Model W D H

BC100GS 23-7/8" 23-3/4" 34-9/16"

Opening Dimensions

Model W D H

BC100GS 24" 24" 35"

Electrical Requirement

• Make sure there is a suitable power outlet (115 volts, 15 amps outlet) with proper

grounding to power the beverage center.

• Avoid the use of three plug adapters or cutting off the third grounding prong in

order to accommodate a two prong outlet. This is a dangerous practice since it

provides no effective grounding for the beverage center and may result in shock

hazard.

Use of Extension Cords

• Avoid the use of an extension cord because of potential safety hazards under

certain conditions. If it is necessary to use an extension cord, use only a 3-wire

extension cord that has a 3-blade grounding plug and a 3-slot outlet that will

accept the plug. The marked rating of the extension cord must be equal to or

greater than the electrical rating of the appliance.

5

English

AWCDZ24S

23-7/8”

25-1/2”

34-9/16”

23-3/4”

D

H

34-9/16”

25-1/2”

Anti-tip bracket Installation

1. Take off upper hinge cover with upwards motion. Refer to illustrations below:

2. Take the anti-tip bracket and screws from the accessory bag. Tighten the anti-tip

bracket on the top of the product with screws as follows in the illustration.

Note: Follow instructions properly or you may do damage to product.

3. Pull glass door open and attach the anti-tip bracket to counter by screw as seen

below. Adjustment of the leveling legs under the unit may be necessary for a proper

fit in the cabinet opening. Start with the rear legs (if necessary) before you slide the

unit fully into the opening –rise or lower the rear legs to make the unit fit properly.

Then carefully slide the unit into opening as not to damage accidently cabinetry or

the floor. Then perform the same adjustments to the front leveling legs to bring the

front of unit to the proper level to install the anti-tip bracket and fit evenly under the

counter.

4. Another set of anti-tip brackets for side installation is provided as option when

the counter top is granite and hard to fix by screw. This set of brackets include one

bracket and four screws for installation on left side if the cabinet when the door is

left-open or on the right side of the cabinet when the door is right-open. Below draft

illustrates the installation procedure.

6

English

7

1. Upper hinge hole's cover

2. Hinge cover's plug and screw

3. Upper hinge's cover

4. Upper hinge's screw

5. Upper hinge

6. Front cover (toe kick)

7. Front cover's screw

8. Lower hinge's screw

9. Lower right hinge

10. Door stop spacer

11. Door stop spacer

12. Upper door hole spacer

13. Glass door

14. Door closer

15. Screw

16. Magnetic switch's screw

17. Magnetic switch

18. Lower left hinge (spare part)

19. Screw hole cap

Right Door

Left Door

Door Reversal

English

8

1. Remove lower toe kick (Front cover)

2. Remove plastic plug in the center if hinge cover (#3)

3. Remove screw from center of hinge cover (#2)

4. Remove hinge cover (#3)

5. Remove Square cover on left (#1)

6. Loosen and remove all 3 screws from upper door hinge (#4 and #5)

NOTE: Hold door while loosing and removing upper hinge to prevent fall

and Damaging door as well as bodily injury

7. Lift door and lay door flat on the door

8. Loosen and remove the screws that hold the plastic door closer attached on

the door in place (#14 and #15)

9. Remove upper right hole plastic door spacer (#12)

10. Remove the small screw hole cap in place (#19)

11. Loosen and remove door magnet switch from bottom center of door (#16 and

#17) and reattach it to the top center of door.

12. Loosen and remove the 4 screws that hold the bottom right door hinge in Place

13. Remove bottom right door hinge

14. Loosen and remove the screw that hold the plastic door closer attached to the

bottom right door hinge (#10 and #11)

15. Attach and tighten plastic door closer removed in step 13 to the bottom left

door hinge provided in the accessory bag inside unit

16. Attach and tighten the bottom left door hinge to the unit with the screws

removed in step 8

17. Take door so handle is now on the right side as it is placed in front of you

and lay flat on floor

18. Insert plastic door spacer removed in step 9 into top left hole of door

19. Attach the plastic door closer to the door removed in step 8

20. Align the bottom left hole on the door with the pin on the bottom left door hinge

21. Slide into place gently

22. Take upper door hinge removed in step 6

23. Align pin of upper door hinge with hole on the upper left if door

24. Take the 3 screws removes step 6 and attach them to the screw holes on the

unit and tighten Note: Do not fully tighten yet

25. Make sure top of door is level with top of cabinet

26. Once level, fully tighten screws that hold upper door hinge in place

27. Replace upper hinge cover removed in step 4

28. Tighten hinge cover to unit with screw removed in step 3

29. Replace screw cover plug removed in step 2

30. Replace square cover removed in step 5 to top cover right screw holes

31. Replace the small screw hole cap removes in step 10

32. Attach and tighten toe kick (Front cover) to the unit with the screws removed in

step 1

Steps to Door Reversal

English

9

English

Beverage Center Features and Use

Initial Setup

Once you have plugged the unit into an electrical outlet, let the unit run for at

least 30 minutes to acclimate itself before making any adjustments. The LED

display will show the current internal temperature.

Temperature Adjustments:

• The beverage center can be set to any temperature between 39˚ and 62˚F to

accommodate your storage requirements. To set the temperature hold the "Set"

button for about 3 seconds. You will notice the temperature display blink.

Fig.#1

Sabbath Mode

• Press and hold "^" and "v" at the same time for 3 seconds, buzzer will ring

once, display panel will flash 5 times and stop. This indicates that the unit

has entered Sabbath mode. In this mode, normal cooling operations still take

place (compressor, magnetic valve, fan) but all luminous equipment including

display panel and LED bulb will shut off no matter if the door is opening or

closing. Press and hold "^" and "v" at the same time for 3 seconds, after dis-

play panel flahses 5 times, you cna exit from Sabbath mode.

Alarm System

Door Ajar Alarm- If the door of the unit is kept open for long time and affect

temperature so much , the system will give an alarm, if you want to stop it, press

"SET" button.

Capacity

The capacity of beverage center is 150 cans. The quantity may vary if the type

or the size of the beverage center & can change.

English

10

Shelving

• The shelves are designed for appearance and easy cleaning.

• There are 3 glass shelves for easy storage and removal of your beverage.

• The middle glass shelf is foldable, has three variable shapes to accommodate

different sizes of beverage bottles. Below chart illustrates the recommended

storage ways.

“°F/°C” Conversion

Press and hold “°F/°C” for 3 seconds, the displayed temperature in Fahrenheit

degree and °F character will convent to temperature in Celsius degree and “°C”

character. Press and hold “°F/°C” for 3 seconds again, the temperature in Celsius

degree and “°C” character will convert to temperature in Fahrenheit degree and

“°F” character.

Interior Light

• To complement the look of your collection, a soft light has been built into the

beverage center. Simply push the "Light" button and the light comes on, push

again for off. For maximum energy efficiency, leave light off when not viewing

your collection.

• When door is open the light will go on. Upon closing the door, the light will go

off.

Power Button

• You can shut the power of the beverage center when you dont ned it to work

by pressing the "Power" button for 3 seconds. It will shut off the compressor,

electromagnetism valve and the display panel. It can also be turned on again

by pressing the "Power" button quickly. The light inside the beverage center will

turn on if you open the door when the power shutting off in order to access the

conveniently.

Normal Operating Sounds You May Hear

• Boiling water, gurgling sounds or slight vibrations that are the result of the

refrigerant circulating through the colling coils.

• The thermostat control will click when it cycles on and off.

11

English

Proper Beverage Center Care and Cleaning

Cleaning and Maintenance

WARNING: To avoid electric shock, always unplug your

Beverage Center before cleaning. Ignoring this

warning may result in death or injury.

CAUTION: Before using cleaning products, always read and

follow manufacturer’s instructions and warnings to

avoid personal injury or product damage.

General: • Prepare a cleaning solution of 3-4 tablespoons of baking soda

mixed with warm water. Use sponge or soft cloth, dampened

with the cleaning solution, to wipe down your beverage center.

• Rinse with clean warm water and dry with a soft cloth.

• Do not use harsh chemicals, abrasives, ammonia, chlorine

bleach, concentrated detergents, solvents or metal scouring

pads. Some of these chemicals may dissolve, damage and/or

discolor your beverage center.

Door Gaskets: Clean door gaskets every three months according to general

instructions. Gaskets must be kept clean and pliable to assure a

proper seal

• Petroleum jelly applied lightly on the hinge side of gaskets will

keep the gasket pliable and ensure a good seal.

Power Interruptions

• Occasionally there may be power interruptions due to thunderstorms or other

causes. Remove the power cord from AC outlet when a power outage occurs.

When power has been restored, replug power cord to AC outlet.

Vacation and Moving Care

• For long vacations or absences, empty food from beverage center and clean

the beverage center and door gaskets according to "General Cleaning"

section. Leave doors open, so air can circulate inside.

• When moving always move the beverage center vertically. Do not move with

the unit lying down, as possible damage to the sealed system could occur.

Note: After moving, wait for 24 hours before plugging in the beverage center.

12

English

Beverage Center does not operate:

• Check if beverage center is plugged in.

• Check if there is power at the AC outlet, by checking the circuit breaker.

Food temperature appears too warm:

• Frequent door openings.

• Allow time for recently added product to reach desired temperature.

• Check gaskets for proper seal.

• Clean front cover.

• Adjust temperature control to colder setting.

Beverage Center is too cold:

• If temperature control setting is too cold, adjust to a warmer setting.

Beverage Center cellar runs too frequently:

• This may be normal to maintain constant temperature during high temperature

and humid days.

• Doors may have been opened frequently or for an extended period of time.

• Clean front cover.

• Check gasket for proper seal.

• Check to see if doors are completely closed.

Moisture build up on interior or exterior of the beverage

center:

• This is normal during high humidity periods.

• Prolonged or frequent door openings.

• Check door gaskets for proper seal.

Beverage Center door does not shut properly:

• Level the beverage center .

• Check for blockages, e.g. beverages.

Troubleshooting

English

Limited Warranty

13

What is covered and for how long?

This warranty covers all defects in

workmanship or materials for a period of:

1 year parts (carry in only)

1 year labor (carry in only)

5 years sealed system

(carry in only)

The warranty commences on the date

the item was purchased and the original

purchase receipt must be presented to the

authorized service center before warranty

repairs are rendered.

EXCEPTION: Commercial or Rental

Use Warranty

90 days labor (carry-in only)

90 days parts

No other warranty applies

What is covered.

1. The mechanical and electrical parts,

which serve as a functional, purpose of

this appliance for a period of 1 year.

This includes all parts except finish, and

trim.

2. The components of the sealed system

e.g. hermetic compressor, condenser

and evaporator from manufacturing

defects for a period of 5 years from the

date of purchase. Any damages to such

components caused by mechanical abuse

or improper handling or shipping will not

be covered.

What will be done?

1. We will repair or replace, at our

discretion any mechanical or electrical

part which proves to be defective in

normal usage during the warranty period

so specified.

2. There will be no charge to the

purchaser for parts and labor on any

covered items during the initial 1 year

period. Beyond this period only parts are

covered in the remaining warranty. Labor

is not provided and must be paid by

the customer.

3. Contact customer service:

1-866-927-4833.

THIS WARRANTY COVERS

APPLIANCES WITHIN THE

CONTINENTAL UNITED STATES,

PUERTO RICO AND CANADA.

IT DOES NOT COVER

THE FOLLOWING:

Damages from improper installation.

Damages in shipping.

Defects other than manufacturing.

D amage from misuse, abuse, accident,

alteration, lack of proper care and

maintenance or incorrect current or

voltage.

Damage from other than household use.

D amage from service by other than an

authorized dealer or service center.

D ecorative trims or replaceable

light bulbs.

Transportation and shipping.

Labor (after the initial 1 year).

THIS LIMITED WARRANTY IS GIVEN

IN LIEU OF ALL OTHER WARRANTIES,

EXPRESSED OR, INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE

The remedy provided in this warranty is

exclusive and is granted in lieu of all other

remedies.

This warranty does not cover incidental

or consequential damages, so the above

limitations may not apply to you. Some

States do not allow limitations on how long

an implied warranty lasts, so the above

limitations may not apply to you.

This warranty gives you specific legal rights,

and you may have other rights, which vary,

from state to state.

New York, NY 10018

14

Français

CONSIGNES GÉNÉRALES DE SECURITÉ

ATTENTION: Lire l’ensemble des instructions avant d’utiliser

l’appareil. Lors de l’utilisation de cet appareil,

prendre toutes les mesures de sécurité de base, y

compris les suivantes:

REMARQUE: Si le réfrigérateur a été placé en position horizontale ou

en position inclinée, que ce soit pour longtemps ou non,

attendez 24 heures avant de brancher l’appareil.

1) N’utiliser cet appareil que pour l’usage prévu, tel que décrit dans ce

guide d’utilisation et d’entretien.

2) Ce réfrigérateur doit être correctement installé, conformément aux

instructions d’installation avant d’être utilisé. Voir les instructions de

mise à la terre dans la section Installation.

3) Ce réfrigérateur ne doit être ni encastré, ni enclos dans un placard. Il

est uniquement conçu pour être installé tel qu’il se présente.

4) Ne jamais tirer sur le cordon d’alimentation pour débrancher le réfri-

gérateur. Toujours saisir fermement la fiche et la tirer tout droit hors de

la prise.

5) Réparer ou remplacer immédiatement tout cordon électrique effiloché

ou autrement endommagé. Ne pas utiliser un cordon fissuré, abrasé

ou dont la prise ou le connecteur est endommagé.

6) Si un ancien réfrigérateur n’est pas utilisé, nous recommandons d’en

retirer les portes afin de réduire le danger qu’il peut représenter pour

les enfants.

7) ATTENTION: Une fois le réfrigérateur en fonctionnement, ne pas

toucher les surfaces froides du congélateur,

particulièrement avec des mains mouillées ou

humides. La peau peut adhérer à ces surfaces

extrêmement froides.

8) Ne pas recongeler les aliments qui ont été complètement décongelés.

Le bulletin maisons et jardins du ministère de l’agriculture des États-

Unis no. 69 stipule : « ..Les aliments congelés peuvent être recongelés

en toute sécurité s’ils contiennent toujours des cristaux de glace ou si

leur température est toujours inférieure à 4,5 °C (40 °F) ».

« …Les viandes hachées, la volaille et le poison présentant une odeur

ou une couleur suspecte ne doivent être ni recongelés, ni mangés.

La crème glacée dégelée doit être jetée. Tout aliment présentant une

odeur ou couleur douteuse doit être jeté cas son ingestion pourrait être

dangereuse.»

« …La décongélation ou la recongélation, même partielle réduit la quali

é gustative des aliments, en particulier des fruits, légumes et plats pré-

parés. La qualité gustative des viandes rouge est beaucoup moins affec-

tée que celle de nombreux autres aliments. Utiliser les aliments recongelés

dès que possible, afin de conserver un maximum de leur qualité gustat-

ive. »

9) Ne pas utiliser d’appareils électriques ou d’objets acérés pour dégivrer le

réfrigérateur.

10) Débrancher le réfrigérateur avant de le nettoyer ou d’effectuer toute

réparation. Remarque: si, pour une raison quelconque, ce produit devait

être dépanné, nous recommandons vivement de confier le travail à un

technicien certifié.

11) Ne pas utiliser le réfrigérateur en présence d’émanations explosives.

REMARQUE: La température ambiante de fonctionnement est comprise entre

55˚-90˚F.

VEUILLEZ CONSERVER CES

INSTRUCTIONS

DANGER

Les enfants pourraient se retrouver coincés dans votre

réfrigérateur ou congélateur usagé avant que vous ne

puissiez vous en débarrasser. Retirer les portes. Laisser les

étagères en place de manière à ce que les enfants ne

puissent pas grimper facilement à l’intérieur.

Français

Agrafer le ticket de caisse au guide. Il devra être présenté pour tout

service après-vente sous garantie.

15

Français

1. Demi De Congélateur De Largeur

2. Compartiment pour cannettes

"Dispense-A-Can™"

3. 3 étagères en verre

4. Commande de Réglage de

Température

5. Rangement pour Grandes Bouteilles

6. Pleine largeur de porte Etagère

7. Pieds de réglage avant ajustables

(Non montrés)

8. Stockage / Plateau D'Égouttement

9. Bac à glaçons

Piéces et Caractéristiques

16

0

3

4

5

6

7

3

2

5

6

1

7

4

8

9

17

Français

1. Retirer l’ensemble du matériel d’emballage. Ceci comprend la base

en mousse ainsi que l’ensemble du matériel adhésif qui maintient les

accessoires du réfrigérateur à l’intérieur tout comme à l’extérieur.

2. Inspecter et enlever tout restant d’emballage, de scotch ou de

matériaux imprimés avant de brancher le réfrigérateur.

• Le réfrigérateur possède deux pieds de mise à niveau qui sont situés sur

les coins avant du réfrigérateur. Après avoir convenablement installé le

réfrigérateur à la place qu’il occupera, procéder à la mise à niveau.

• Pour régler les pieds de mise à niveau, les tourner dans le sens des

aiguilles d’une montre afin de surélever le réfrigérateur et dans le sens

inverse des aiguilles d’une montre pour l’abaisser. La porte du

réfrigérateur se ferme plus facilement lorsque les pieds de mise à

niveau sont surélevés.

• Pour être sûr que le réfrigérateur fonctionne à son maximum d’efficacité,

l’installer dans un environnement favorable à une bonne circulation

d’air et possédant des connexions de plomberie et d’électricité saines.

• Les indications suivantes concernent l’espace recommandé autour du

réfrigérateur:

Latéralement...................19mm (3/4")

Partie supérieure.............50mm (2")

Arrière...........................50 mm (2")

Installation du Réfrigérateur

Désemballage du Réfrigérateur

Mise á Niveau du Réfrigérateur

Circulation d’Air Adéquate

18

Français

• Pour l’alimentation du réfrigérateur, veiller à utiliser une prise

de courant convenable (prise de 120 volts,15 amp) raccordée à

la terre.

• Eviter d’utiliser des adaptateurs à trois fiches ou de sectionner la

troisième fiche reliée à la terre dans le but d’utiliser un branchement à

deux fiches. Cette pratique pourrait s’avérer dangereuse dans la mesure

où le réfrigérateur n’est pas relié convenablement à la terre, et risquerait

de causer des risques d’électrocution.

• Éviter d’utiliser une rallonge électrique car, dans certains cas, cela peut

entraîner des risques pour la santé. S’il est nécessaire d’utiliser une

rallonge, utiliser uniquement une rallonge possédant une fiche male à

deux broches plus terre à une extrémité et une prise femelle de même

type à l’autre extrémité. La capacité électrique de la rallonge doit être

égale ou supérieure à la capacité de l’appareil. N’UTILISEZ PAS DE

RALLONGES D’UNE LONGUEUR SUPÉRIEURE À

12 PIEDS/3,65 MÈTRES.

• Ne pas installer le réfrigérateur dans un endroit qui n’est pas

convenablement isolé ou chauffé; comme par exemple un garage, etc.

Le réfrigérateur n’est pas conçu pour fonctionner à des températures

inférieures à 12°C.

• Choisir un endroit convenable et placer le réfrigérateur sur une surface

solide et plane, loin de sources de chaleur telles que: les radiateurs, les

éléments chauffants à plinthes, les cuisinières, etc. Toute irrégularité au

sol doit être corrigée à l’aide des pieds de mise à niveau situés sur les

coins avant de la partie inférieure

du réfrigérateur.

Limitations relatives à l’Installation

ATTENTION: EXIGENCES ÉLECTRIQUES – RISQUE DE

CHOC ÉLECTRIQUE

ATTENTION: UTILISATION DE RALLONGES – RISQUE DE

DANGER POTENTIEL

Caractéristiques Electriques

Utilisation de Rallonges

19

Français

Placer la Charnière de Porte sur le Côté Opposé

du Réfrigérateur

1. Enlevez la couverture superieure de la charniere

2. Desserrez et enlevez a l'aide d'un tournevis Phillips, les vis qui soutiennent la

charniere en place.

3. Enlevez la charniere et retirez la porte soigneusement

4. Enlevez les bouchons des trous des vis du cote oppose et inserrez les dans

les ouvertures des trous des vis que vous venez de retirer

5. Enlevez tous les articles qui ne sont pas attaches du refrigerateur, tournez le

sur son dos soigneusement et retirez les 2 pieds qui le stabilisent et mettez

les de cote .

6. Desserez les vis qui soutiennent l'equerre de la charniere inferieure du refrig

erateur et enlevez les vis et l'equerre

7. Enlevez les 2 vis du cote oppose et inserrezles dans les trous des vis pre

cedemment enleves .

8. Enlevez la goupille de la porte and tournant le compteur dans le sens

des aiguilles d'une montre et reinserrez au dessous de l'equerre et serrez.

9. Alignez l'equerre et inserrez les 2 vis dans les trous fournis

10. Alignez le trou dans la porte avec la goupille et la rondelle de la porteet

abaissez doucement jusqu'a ce qu'elle soit ferme.

11. Alignez l'equerre de la charniere superieure avec les trous des vis, inserrez

les vis et serrez fermement.

12. Replacez la couverture de la charniere

1

0

2

3

4

5

6

7

REMARQUE: Comme le joint recoit aoouyé-dans pendant l’expédition,

aprés avoir renversé la porte le joint peut devoir étre remet

á l’état initial. Ceci est fait pour empécher le refroidit l’air

réfrigéré d’échapper. Si lá-bas est un écart entre la porte

et le placard, régle le joint en tirant doucement il hors

sceller l’écart.

La page est en cours de chargement...

Haier BC100GS Manuel utilisateur

Haier BC100GS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents