Samsung UN65F8000AF Guide de démarrage rapide

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs

Samsung.

Country Customer Care

Center

Web Site Address

CANADA 1-800-SAMSUNG

(726-7864)

www.samsung.com/ca (English)

www.samsung.com/ca_fr (French)

Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

U.S.A 1-800-SAMSUNG

(726-7864)

www.samsung.com/us Samsung Electronics America, Inc. 85

Challenger Road Ridgeeld Park, NJ 07660

BN68-05194B-04

LED TV

user manual

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________Serial No. _____________

✎ If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 1 2013-10-29 �� 4:48:38

English - 2

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this

apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not place this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

− Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a ﬁre or electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or

near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries

properly. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay

particular attention to cords at the plug end, at wall outlets, and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the

local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

• Make sure to plug the power cord in until it is ﬁrmly seated. When unplugging the power cord from a wall outlet, always pull on the power

cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately

and contact an authorized dealer or service center.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time

(especially when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or

the insulation to deteriorate.

• Be sure to contact an authorized service center for information if you intend to install your TV in a location with heavy dust, high or low

temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such in an airport, a train station, etc. Failing to

do so may lead to serious damage of your TV.

• Use only a properly grounded plug and wall outlet.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be

readily accessible at all times.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor or a location exposed to vibration.

• Do not drop or apply any shock to the product. If the product is damaged, disconnect the power cord and contact a service center.

• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals

such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance

of the TV or erase the printing on the product.

• Do not expose this apparatus to dripping or splashing.

• Do not dispose of batteries in ﬁre.

• Do not short-circuit, disassemble or overheat the batteries.

• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace

only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS

PRODUCT AT ALL TIMES.

Important Safety Instructions

Warning! Important Safety Instructions

This symbol indicates that high voltage is

present inside. It is dangerous to make any kind

of contact with any internal part of this product.

This symbol indicates that important literature

concerning operation and maintenance has

been included with this product.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

RISK OF ELECTRIC SHOCK DO NOT OPEN

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 2 2013-10-29 �� 4:48:40

English - 3

Contents

Basic Features

5 Using the Smart Touch Control

6 Connecting to the TV

6 Inserting the Batteries (AAA X 2)

7 Low Battery Power Warning

8 Using the touch pad

8 Changing Channels by Entering Numbers

9 Show Status and Notiﬁcation Banner

9 Recommended

9 History

9 Searching

9 Using the Virtual Remote Control

10 Turning on the TV

11 Built-in TV Camera and Microphone

11 Extending the TV Camera

11 Retracting the Camera

12 Switching Between Video Sources

13 Universal Remote Setup

13 Add the External Device

Viewing the e-Manual

14 Viewing the e-Manual

14 Scrolling a Page

14 Using the Top Icons

14 Returning to the Home Page

14 Searching the Index

15 Searching Pages

15 Closing the e-Manual

15 Jumping to a Menu Item

15 Updating the e-Manual

Network Conﬁguration

16 Connecting to a Network

16 Network Connection - Wireless

16 Wireless Network Precautions

16 Network Security Protocols

17 Network Connection - Wired

3D Basics

18 3D Active Glasses

18 Pairing 3D Active Glasses

20 Watching 3D Video

Troubleshooting and Other

Information

21 What is Remote Support?

21 The Evolution Kit Slot (Kit Sold Separately)

22 Troubleshooting

23 Mounting the TV on the Wall Using

the Wall Mount Kit (Optional)

25 Assembling the Cable clip

25 Assembling the Power inlet Cover

26 Eco Sensor and Screen Brightness

27 Maintenance

27 Providing Proper Ventilation for Your TV

28 Securing the TV to the Wall

Speciﬁcations

30 Speciﬁcations

31 Dimensions

31 Licenses

Guides

32 Warranty Information

34 Regulatory Compliance Statements

(For 3D Active Glasses)

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 3 2013-10-29 �� 4:48:40

English - 4

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual

product appearance. Product design and speciﬁcations may change without notice.

Features of your new TV

• 3D: This new feature enables you to view 3D content.

• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you

can surf the web, download applications, and stay in touch with family and friends through social

networking services. In addition, you can view or play photo, video, and music ﬁles stored on external

storage devices.

Press the ™ button to launch Smart Hub. Choose a service using the icons displayed in the top part of

the screen.

Smart Hub services and functionality include:

Social: Watch the latest YouTube videos and your and your friends' video posts on Facebook and

Twitter. You can also make video calls to friends by the TV camera.

Apps: Samsung Apps offers an extensive collection of free and paid news, sports, weather, and

gaming content you can directly download to and enjoy on your TV.

On TV: Check a listing of programs that are currently airing or are scheduled to air.

Photos, Videos & Music: Play back photo, video, and music ﬁles from an external storage device.

• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support

Anynet+ with your Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV.

• SMART Interaction: Using this function, you can access and control menu options and functions

using motions.

• Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.

• MHL & Screen Mirroring: Displays mobile device screens on your TV using a wired or wireless

connection.

Accessories

Included in this box

Remote Control Stand Parts and Cables

x 2

Smart Touch Control Power inlet cover Cable clip Wall mount adapter

Batteries (AAA x 2) TV holder kit Power cord IR extender

RCA Adapter x 2 Component adapter Base

x 2

x 8

Leg Screws

• Also included: User manual, 3D active glasses, quick setup guide

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 4 2013-10-29 �� 4:48:42

English - 5

Using the Smart Touch Control

TV

MIC

STB

SOURCE

VOICE

MORE

VOL

CH

LIGHT DVR MENU 3D

SMART HUB

GUIDERETURN

EXIT

MUTE

Touch Pad

• Drag on the touch pad to move the

focus on the screen.

• Press the touch pad to run,

activate, or select the highlighted

item.

• Press and hold the touch pad to

display the Channel List.

VOICE: Take your voice command and

enter a text using your voice.

Displays a virtual remote panel on the

screen. See the e-Manual chapter,

Controlling the TV > Using the Virtual

Remote Control.

Changes channels.

Displays the EPG

(Electronic Program Guide).

Brings up Smart Hub applications.

See the e-Manual chapter, SMART TV

Features > Smart Hub.

✎

To exit an application that is

running easily, press the

™

button.

Turn on and off the satellite or cable

set-top box connected to the TV.

For this, the Smart Touch Control must

be conﬁgured as a universal remote

control. See the e-Manual chapter,

Controlling the TV > Universal

Remote Setup.

Turns the TV on and off.

Displays and selects the available video

sources.

Returns to the previous menu.

LIGHT: Turn on the backlight for the

buttons. The backlight lasts for only a

few seconds. Turns the remote control

light on or off. When on, the buttons

become illuminated for a moment when

pressed. (Using the remote control with

this button set to On will reduce the

battery usage time.)

DVR: This button is only available

when the Smart Touch Control is

conﬁgured to function as a universal

remote control to control a set-top box.

Run DVR (Digital Video Recording) in

set-top box.

MENU: Opens the OSD.

3D: Turns the 3D function on or off.

See e-Manual chapter,

TV Viewing > 3D TV.

TV

MIC

STB

SOURCE

VOICE

MORE

VOL

CH

LIGHT DVR MENU 3D

SMART HUB

GUIDERETURN

EXIT

MUTE

MUTE: Cuts

off the sound

temporarily.

Adjusts the volume.

Use Voice Recognition function with

the microphone embedded in remote

control.

✎

The Voice Recognition function

can be affected by unclear

pronunciation, voice level, or

surrounding noise.

Basic Features

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 5 2013-10-29 �� 4:48:43

English - 6

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must ﬁrst pair it to the TV via Bluetooth.

However, the Smart Touch Control is only available for the paired Samsung TV.

✎

We recommend to use the Smart Touch Control in less than 20ft(6m). A usable distance may differ

depending on the wireless environmental conditions.

1. To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and press the

P button. The remote control receiver's location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt

to connect to the Smart Touch Control automatically.

Inserting the Batteries (AAA X 2)

1 2 3

1. Slightly lift the battery cover using a plastic card. Next, pull on the cover’s notch with a ﬁngernail to

remove the cover completely.

✎

Check the location of the battery cover groove. The groove's location may vary depending on the

type of Smart Touch Control is provided with the product.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.

3. Align the battery cover with the back of the remote control, and then press down along the edges until

it is completely attached to the remote control.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 6 2013-10-29 �� 4:48:43

English - 7

Reconnecting the Smart Touch Control

If the Smart Touch Control stops operating or works abnormally, replace the battery as this may be caused

by insufﬁcient battery power. If the problem persists, press the PAIRING button on the Smart Touch Control

to restore pairing with the TV. The PAIRING button cannot be accessed without removing the Smart Touch

Control's battery cover. Within a distance between 1ft to 13.1ft(30cm to 4m), point the Smart Touch

Control to the TV receiver and press the PAIRING button. When pairing is complete, the pairing image

displays at the bottom left of the TV screen.

Low Battery Power Warning

If the battery becomes low while using the Smart Touch Control, the following alarm window appears at the

bottom of the left screen. If the alarm window pops up, replace the batteries of the Smart Touch Control.

Use alkaline batteries for longer usage.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 7 2013-10-29 �� 4:48:44

English - 8

Using the touch pad

Use the touch pad to implement various commands. Navigate to Tutorial (System > Device Manager >

Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.

Dragging Pressing

Drag on the touch pad to move the focus, pointer, or highlight in the

direction the ﬁnger is dragging.

Press the touch pad to select the item highlighted or in focus.

When watching TV, press and hold the touch pad for 2 seconds displays

the channel list. On some apps, press and hold the touch pad for 2

seconds displays a list of functions available for the app.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left or right edge of

the touchpad to bring up the numerical input window on the screen. Use

your ﬁnger to enter the number for the channel you want to watch. The

recognized number is displayed on the screen and the TV switches to

the corresponding channel. However, the number you have entered may

not be recognized properly by the TV. Refer to the guide below to ensure

that your numerical entries are recognized accurately.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not recognize your entries if you

do not follow the sequences shown below.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 8 2013-10-29 �� 4:48:44

English - 9

Show Status and Notiﬁcation Banner

Press the MORE button on the Smart Touch Control and then select STATUS on the virtual remote panel

that appears on the screen. The status and notiﬁcation banner appears at the top of the screen. For more

information about using the status and notiﬁcation banner, refer to e-Manual > SMART TV Features >

Status and Notiﬁcation.

Recommended

Press the RECOMM. / SEARCH button and then select the Recommended from the list on bottom of the

screen. This shows the current/scheduled program and application recommendations.

Select a program that is currently airing to jump to the corresponding channel or a program that is

scheduled to air to set up a Schedule Viewing setting. Refer to e-Manual > SMART TV Features > On TV

for more information.

Select an application to launch. Samsung Apps will launch if the selected application is not installed on the

TV. Refer to e-Manual > SMART TV Features > Apps > Samsung Apps for more information.

History

Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of

the screen. This displays an interactive list of recently accessed channels, media content and applications.

Searching

Press the RECOMM. / SEARCH button on the Smart Touch Control. The list appears at the bottom of the

screen. Press the RECOMM. / SEARCH button again. The keypad will appear on the screen. Enter search

criteria to search not only many apps and their contents on the TV but also the Web.

Refer to e-Manual > SMART TV Features > Searching for more information.

Using the Virtual Remote Control

Press the MORE button to display the virtual remote panel on the TV screen. The virtual remote panel

consists of the number panel, a playback control panel, and the quick access panel. Use the touch pad to

highlight and select icons, numbers, and buttons on the panels.

✎

The displayed virtual remote panel on the TV screen may differ depending on the country.

Changing the Virtual Remote Panel

You can change which virtual remote panel is displayed on the TV screen. To shift between panels, move

the focus highlight beyond the left or right edge of the displayed panel.

Use left/right scroll function on the touch pad to change the panel easily.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 9 2013-10-29 �� 4:48:44

English - 10

Change a position of the Virtual Remote Panel

Press the MORE button on the Smart Touch Control. The virtual remote panel appears on the screen.

Press and hold the touch pad for one second. Users can change a position of the virtual remote panel of

the screen.

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while

watching TV. Changing the channel using the number pad leaves a record, allowing you to easily return to

previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next ﬁle, select a function with

the a, b, {, } buttons, and much more while enjoying media content.

Using the Quick Access Panel

Use the buttons on the quick access panel to bring up the TV's INFO, TOOLS, or e-Manual screens. Note

that the buttons that appear may vary depending on the operating mode of the Smart Touch Control (with

the TV only, as a universal remote, etc.).

Turning on the TV

Turn on the TV using the P button on the Smart Touch Control or TV panel.

✎

The first time you turn on your TV, it will immediately start the initial setup.

✎

The product color and shape may vary depending on the model.

✎

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV

without the remote control.

mR

P

TV

MIC

STB

SOURCE

VOICE

MORE

VOL

CH

LIGHT

DVR

MENU

3D

SMART HUB

GUIDERETURN

EXIT

Open Smart Hub.

Turn off the TV.

Select a source.Open the menu.

TV Controller

The control stick is located at the

lower-left corner on the back of the TV.

Camera

Remote control sensor

When you use the Smart Touch Control,

the standby LED does not respond,

except when you press the

P

button.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 10 2013-10-29 �� 4:48:45

English - 11

Built-in TV Camera and Microphone

This TV features a built-in TV camera and microphone that you can use for the Motion Control, Voice

Recognition, and Face Recognition features. You can also use the camera's angle adjustment knob to

change the camera's viewing angle.

From the Top From Behind

Microphone

Lens

Knob for camera's angle adjustment

Microphone

경고 주의

경고

주의

Do not touch the lens while operating the TV camera.

You can leave ﬁngerprints that may affect the image quality.

If the lens gets dirty, clean it using a soft piece of cloth.

Extending the TV Camera

To use the TV camera, you must ﬁrst extend it.

Gently push the camera in without touching the lens until you hear a click. The camera pops up.

Retracting the Camera

If you are not using the TV camera, keep it retracted inside the TV. The Motion Control and Face

Recognition features cannot be used while the TV camera is in the retracted state, but Voice Recognition

will still be available.

Gently push the camera in without touching the lens until you hear a click.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 11 2013-10-29 �� 4:48:48

English - 12

Switching Between Video Sources

Press the SOURCE button to switch between devices connected to the TV.

For example, to switch to a game console connected to the second HDMI connector, press the SOURCE

button. From the Source list, select HDMI2. The connector names may vary depending on the product.

Select Tools at the upper-right corner of the source screen to access the following functions.

• Edit Name: Lets you associate a device name to an input source.

You can select the following device names in the Edit Name option:

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI

PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA

To associate a device name to an input source, follow these steps:

1. Select Tools in the upper right corner of the source screen.

2. Select Edit Name.

3. Find the input source you want in the Source list (HDMI1, HDMI2, Component, etc.).

4. Select the blank ﬁeld next to the input.

5. In the device name list that appears, select the name of the device attached to the input.

When you view the Source list, the device name and the input jack will be displayed together.

− If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI cable, select PC from the

device name list.

− If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI to DVI cable, select DVI PC

from the device name list.

− If you connected an AV device to the HDMI IN 2 (DVI) port with an HDMI to DVI cable, select DVI

Devices from the device name list.

• Information: View detailed information about the connected devices.

• Anynet+ (HDMI-CEC): A list appears showing Anynet+ compatible ones of external devices connected

to the TV.

• Remove USB: Remove the USB device from the list safely. This function is only available when the

USB device selected.

Universal Remote Setup: Use to conﬁgure universal remote control settings. Using the universal remote

control, you can control external devices connected to the TV, such as a set-top box, Blu-ray player, and

AV receiver.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 12 2013-10-29 �� 4:48:49

English - 13

Universal Remote Setup

This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home

theaters, and other third-party external devices connected to the TV using the TV's remote control.

2 inches

Keep a distance of 2 inches at least between the IR Extender and the external device, as the illustration

shows. Face the IR Extender toward the external device’s remote control signal receiver. Note that it should

be no obstacle between IR Extender and external device. The presence of an obstacle will interfere with

the transmission of the remote control signal.

Add the External Device

1. Turn on the external device you wish to set up universal remote function for and then press the

SOURCE to bring up the Source screen.

2. Select Universal Remote Setup from the top of the screen. This initiates the universal remote setup

process.

3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the

remote control by entering the model number manually.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 13 2013-10-29 �� 4:48:49

English - 14

Viewing the e-Manual

This TV has a built-in e-Manual that contains information about your TV's key features and instructions for

using them. To view the e-Manual, use one of the following methods:

• Open the Support menu and choose e-Manual (Troubleshooting).

• Press the MORE button on the Smart Touch Control to display the virtual remote panel on the TV

screen. Flick the touch pad until the quick access panel appears, select the e-Manual icon, and then

press the touch pad.

✎

In the e-Manual, words in blue refer to screen menu options and words in light blue refer to remote

control buttons.

✎

A printable version of this guide is also available at www.samsung.com/support.

Scrolling a Page

To scroll a page, use of one of the following methods:

• Place the focus on the

or button at the right edge of the screen, and then press the touch pad.

• Drag or ﬂick up or down the line on either the left or right edge of the touch pad.

• Place the focus on the

or button at the right edge of the screen, drag or ﬂick up or down on the

touch pad.

Using the Top Icons

Use the Back, Forward, and Opened pages icons on the top left of the screen to navigate through

pages. These icons are available after you have viewed two or more pages.

Returning to the Home Page

To return to the home page, select the a button or select on the top right of the screen.

✎

To select a letter button (a, b, {, }), press the MORE button on the Smart Touch Control to display

to display the virtual remote panel on the TV screen. Flick the touch pad until the playback control

panel appears, select the a button, and then press the touch pad.

Searching the Index

Select the b button or select on the top right of the screen to display the index. Select a term to

display the page containing the term.

Viewing the e-Manual

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 14 2013-10-29 �� 4:48:50

English - 15

Searching Pages

Select the { button or select on the top right of the screen, and enter search criteria. Select a page

from the list of search results to display it.

Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select at the upper-right corner of the

screen.

Jumping to a Menu Item

To jump directly to the menu item that is described in the current section, select . It is possible to

jump from a menu item directly to the related section in the e-Manual. On a menu screen, press the MORE

button on the Smart Touch Control and then select e-Manual on the virtual remote panel that appears on

the screen.

✎

This feature may not be available, depending on the menu.

Picture

Picture Mode

• Backlight

• Contrast

• Brightness

• Sharpness

• Color

• Tint (G/R)

Standard

14

100

45

50

R50

G50

e-Manual

Try Now

Updating the e-Manual

Press the ™ button and select Apps, and then select More Apps. The e-Manual can be updated in the

same way with an application update.

On the More Apps screen, select Update Apps, and then select e-Manual from the list. The e-Manual

starts updating to the latest version. However, Update Apps appears on the screen only when the update

is required.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 15 2013-10-29 �� 4:48:51

English - 16

Network Conﬁguration

Connecting to a Network

Connecting the TV to a network gives you access to online services such as Smart Hub and lets you

update the TV's software online directly from Samsung.com.

Network Connection - Wireless

Connect the TV to the Internet using a standard wireless router or modem.

Wireless IP Router or Modem

that has a DHCP Server

LAN Cable (Not Supplied)

The LAN Port on the Wall

Wireless Network Precautions

• This TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using

IEEE 802.11n. Otherwise, when you play video over a network connection, the video may not play

smoothly.

• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless

router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

• Select a channel that is not currently in use for the wireless router. If the channel set for the

wireless router is currently being used by another device, the result is usually interference and/or a

communications failure.

• Most wireless networks have an optional security system. To enable a wireless network's security

system, you need to create a security key using characters and numbers, and then enter that key into

the router through its menu. You then must enter this security key into any other devices you want to

connect to the wireless network.

Network Security Protocols

The TV only supports the following wireless network security protocols:

• Authentication Modes: WEP, WPAPSK, WPA2PSK

• Encryption Types: WEP, TKIP, AES

In compliance with the newest Wi-Fi certiﬁcation speciﬁcations, Samsung TVs do not support WEP or TKIP

security encryption in networks running in the 802.11n mode.

If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using

PBC (Push Button Conﬁguration) or a PIN (Personal Identiﬁcation Number). WPS automatically conﬁgures

the SSID and WPA key settings.

Your Smart TV cannot connect to uncertiﬁed wireless routers.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 16 2013-10-29 �� 4:48:51

English - 17

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network

setup. They are illustrated below:

The Modem Port on the Wall

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

TV Rear Panel

External Modem

(ADSL / VDSL / Cable TV)

TV Rear Panel

The Modem Port on the Wall

Modem Cable

(Not Supplied)

LAN Cable

(Not Supplied)

LAN Cable

(Not Supplied)

External Modem

(ADSL / VDSL / Cable TV)

IP Router that has a

DHCP Server

TV Rear Panel

The LAN Port on the Wall

LAN Cable (Not Supplied)

✎

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 17 2013-10-29 �� 4:48:52

English - 18

3D Basics

3D Active Glasses

Features

Samsung's SSG-5100GB 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D

glasses communicate with Samsung 3D TVs via the 2.4GHz RF band.

✎

The Samsung 3D glasses are only compatible with Samsung D, E, and F series 3D TV's that were

released in 2011, 2012, and 2013. These 3D glasses cannot be connected to other Bluetooth devices.

Parts

LED Indicator & Power Button

Liquid crystal shutter

Battery Cover

✎

For details on how to attach the glasses'

temples, refer to the separate 3D glasses

manual.

Replacing the Battery

If the red LED blinks every two seconds continually, replace the battery with a new one.

✎

Insert the "+" side of the battery into the side marked with "+" in the battery compartment.

✎

To check the remaining battery capacity, refer to the pairing section in this manual.

Pull the battery cover

downward

Open the battery cover Remove the battery Replace the battery Push the battery cover

downward

Close the battery cover

Pairing 3D Active Glasses

✎

What is Pairing? Pairing is the process of connecting 3D glasses and a 3D TV so that the two devices

can exchange data.

✎

Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50 cm) apart from each other

while pairing is in progress.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 18 2013-10-29 �� 4:48:53

English - 19

• Turning the glasses on

Press the power button brieﬂy. The green LED turns on for 3 seconds.

(Make sure that 3D is activated on the TV before using the 3D glasses.)

• Turning the glasses off

Press the power button brieﬂy. The red LED turns on for 3 seconds.

• Performing the pairing process

Turn the TV on and let it power up completely. Press and hold the Power

button on the glasses. The green and the red LEDs blink alternately for 2

seconds.

• Operating range

2~6m

50cm

Recommended pairing distance

Recommended viewing distance

Recommended viewing distance Recommended pairing distance

2~6m (6.5 to 19.5 ft) 50 cm or less (19.5 in)

✎

Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. (This

feature only applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013.)

✎

If you keep trying to pair the glasses and the TV after pairing has failed, the battery level will decrease

significantly. However, the battery level will recover to a certain degree in about a minute.

✎

The working distance is affected by the presence of obstacles (a person, metal, walls, etc.) between

the glasses and the TV and the strength of the Bluetooth signal.

✎

Turn off the 3D glasses when they are not in use. If you leave the 3D glasses on, the battery lifespan

decreases.

Pairing steps

1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.

2. Press the power button on the 3D glasses brieﬂy. The 3D glasses will power on and pairing will start.

3. The message “3D glasses are connected to TV.” will be displayed on the TV screen when the pairing is

successfully completed.

• If pairing fails, the 3D glasses will power off.

• If the ﬁrst attempt to pair fails, power the TV off and on again and perform step 2.

• How to pair again: Press the power button on the 3D glasses for more than 1 second.

You must pair the glasses again in the following situations:

− If the 3D glasses do not function, even when the power button is pressed, especially if the TV has

just been a repaired.

− If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F

series released in 2011 through 2013. You must pair the glasses with the other TV.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 19 2013-10-29 �� 4:48:53

English - 20

Watching 3D Video

Some 3D modes may not be available depending on the format of the image source.

To watch in 3D, you must wear 3D Active Glasses and turn the glasses on by pressing the power button.

1. Go to the 3D screen. (Picture > 3D)

2. Select the 3D Mode. The 3D Mode screen appears.

3. Set the 3D Mode of the image you want to view.

Troubleshooting

If you encounter... Try this...

My 3D glasses do not work.

Replace the battery.

The 3D glasses should be close to the TV. Make sure that the distance

between the TV and your 3D glasses is less than 19.5 feet (6m) in a

straight line.

Check the 3D function settings of your TV.

The LED keeps blinking The battery is dead. Replace the battery.

Speciﬁcations (Model Number: SSG-5100GB)

Optics

Shutters Liquid crystal Transmittance 36±2%

Recommended

operating

distance

2 ~ 6m (6.5 to 19.5 ft) Field Rate 120 ﬁelds/second

Weight Glasses 21.5g/.76 oz. (including the battery: 24.0±0.5g/.85.±.018oz. )

Power Glasses One 3V lithium/manganese dioxide battery 3V (CR2025)

Power

consumption

Glasses 0.85mA (Average)

Battery

Type 165mAh, 3.0V (CR2025)

Operating time 150 hours

Operating

conditions

Operating

temperature

50 °F ~ 104 °F (10°C ~ 40°C)

Custody

temperature

-4 °F ~ 113 °F (-20°C ~ 45°C)

✎

Product specifications may be changed without notice in order to enhance product performance.

✎

The continuous operating time may differ depending on the wireless communication environment and

usage conditions.

[UF8000-75inch-ZC]BN68-05194B-04L02.indb 20 2013-10-29 �� 4:48:54

La page charge ...

Samsung UN65F8000AF Guide de démarrage rapide

Ce manuel convient également à

Samsung UN65F8000AF Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents