Topdon JS3000 Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Jump Starter USER MANUAL
JUMPSURGE
3000
CONTENT
Welcome
DE
17
17
17
18
19
21
22
25
25
26
EN
5
5
5
6
7
9
10
13
13
14
FR
29
29
29
30
31
33
34
37
37
38
ES
41
41
41
42
43
45
46
49
49
50
IT
53
53
53
54
55
57
58
61
61
62
65
65
65
66
67
69
70
73
73
74
PT
77
77
77
78
79
81
82
85
85
86
RU
91
91
91
92
93
95
96
99
99
100
JP
About
Safety cautions
FAQ
Warranty
What is
included
Product
overview
Recharge the
jump starter
How to jump
start vehicles
(12v only)
Specications
ENGLISH
WELCOME
ABOUT
SAFETY CAUTIONS
Thank you for purchasing the JUMPSURGE3000. If any
issues arise during the use of this product, please contact
[email protected] for ofcial technical support.
The JUMPSURGE3000 is a portable jump starter that
delivers 3,000 peak amps for jump starting a 12V lead-acid
battery in seconds. It supports quick and safe starts for
12V cars, boats, motorcycles, ATVs, lawnmowers, caravans,
tractors, trucks, etc., with up to 9.0-liter gasoline or 7.0-liter
diesel engines. It is able to jump start the batteries 45 times
on a single charge.
It also functions as a power bank to quickly charge
electronic devices like phones and tablets, or supply power
to DC devices.
Please read this manual carefully before using the tool and
keep it for future reference.
1. ONLY use the battery clamps that come with this product.
the battery manufacturer.
2. DO NOT use this product if the cable or the jump starter
has any damage.
3. This product can only be used for starting vehicles with
12-volt lead-acid batteries.
4. Only jump-start vehicles when the battery level of the
jump starter is above 50%.
5. If the engine does not start successfully on the rst try,
disconnect the clamps from the vehicle battery and wait
at least 20 seconds before reconnecting. DO NOT attempt
more than 3 consecutive jump-starts within 2 minutes.
6. DO NOT put the product under direct sunlight or in high-
temperature areas.
7. DO NOT disassemble the product by yourself.
EN | 5
8. DO NOT place the product in high-temperature
environments for a long time. The JUMPSURGE3000's
working temperature is of -10~40 (14 ~104 ).
9. Check the battery level of this product every two months
and charge it regularly.
10. The JUMPSURGE3000 contains a Lithium-Ion Battery.
Please dispose of it under local regulations at the end of its
life.
WHAT'S INCLUDED
JUMPSURGE 3000
Battery Clamps
USB Cable
Adapter
EVA Carrying Bag
User Manual
PRODUCT OVERVIEW
EN | 7
LED
Light
Hook Stand
Socket For
Battery Clamps
DC Out (Max
16.8V/10A)
USB Out
(5V/2A) Type-C In (5V/3A, 9V/3A, 12V/3A, 15V/3A)
Type-C Out (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A)
Battery Level
Indicator
Power Button
Status Indicator
BOOST Button
USB Out (5V/3A,
9V/2A, 12V/1.5A)
Handle
A Guide To The Status Indicator:
If The Light is Solid Green:
The voltage of the vehicle battery is normal. You can jump-
start the vehicle with the JUMPSURGE 3000.
If The Light Doesn't Turn On:
The voltage of the vehicle battery is too low to be detected.
Press and hold the BOOST Button for around 3
seconds until it lights up. Then, the jump starter will enter
a forced output mode. Start your vehicle within the next 30
seconds.
Note: The forced output mode disables all safety protections
temporarily. Therefore, only use this mode when the vehicle
battery is extremely low.
Positive Clamp (Red) Negative Clamp (Black)
RECHARGE THE JUMP
STARTER
A Guide To The LED Light:
The JUMPSURGE3000 comes partially charged and needs
to be fully charged before use. Please charge your jump
starter through the Type-C In port once you receive it.
Note:
Only jump-start vehicles when the battery level of the jump
starter is above 50%.
Press the Power Button once to turn on the jump-
starter.
Press and Hold the Power Button for 3 Seconds to
turn on the LED Light. Then Press the Power Button once to
toggle between Flashlight, Strobe, SOS, and POWER OFF.
EN | 9
Step 2:
Connect the other end of the battery clamps to the vehicle
battery. Red clamp to positive polarity(+), black clamp to
negative polarity(-).
Step 3:
Press the Power Button once to power on the jump
starter. The Battery Level Indicator
will light up, which means the tool is ready to jump-start a
vehicle. The Status Indicator will turn green which
HOW TO JUMP START
VEHICLES(12V ONLY)
Important:
Before attempting to jump-start a vehicle, make sure
you have turned off all of the power loads of the vehicle,
including headlights, radio, air conditioning, etc.
Step 1:
Plug the blue end of the battery clamps into the socket on
the jump starter.
(Red) (Black)
Notes:
* If the Status Indicator doesn't turn on, press and
hold the BOOST Button to enable the forced output
mode.
* The jump starter has a built-in buzzer that will ring when
a reverse polarity, over-temperature, over-circuit, and other
improper connections are detected. Disconnect the jump
starter if the buzzer rings and connect again after the issue
is resolved.
Step 4:
Try starting the vehicle. If it fails, disconnect the clamps
from the vehicle's battery and wait for 20 seconds, then
reconnect and try again. Do not attempt more than 3
consecutive jump-starts within 2 minutes.
EN | 11
means the vehicle battery voltage is normal and ready for
jump-starting.
This jump starter is able to be used as a power bank.
Press the Power Button once to turn on the
JUMPSURGE3000. Then you can quickly charge your phone
or tablet through the USB Out port, and quickly charge
your laptop through the Type-C Out port. You can also use
it to supply DC power (Max 16.8V/10A) to other automotive
devices, such as tire inator or car fridge, through the DC
Out port.
Step 5:
After successfully cranking the vehicle, the jump starter
will automatically power off in 10 seconds without any
operation. Remove the clamps from batteries and separate
the clamps and jump starter.
(Red) (Black)
Other Functions
SPECIFICATIONS
FAQ
Model
Battery Capacity
USB1 Output
USB2 Output
DC Output
Type-C Output
Type-C Input
Peak Current
Operating Temperature
Storage Temperature
JUMPSURGE3000
24,000mAh, 3.7V/88.8Wh
5V 3A, 9V 2A, 12V 1.5A
5V 2A
Max 16.8V 10A
5V 3A, 9V 3A, 12V 3A,
15V 3A, 20V 2.25A
5V 3A, 9V 3A, 12V 3A,
15V 3A
3000A
-10~40 (14 ~104 )
-20~75 (-4 ~167 )
Q1: How many times can the JUMPSURGE3000 jump start
a car with a full charge?
Up to 45 times. It depends on the vehicle engine's power
and the vehicle battery's power.
Q2: How long does it take to fully charge the JUMPSURGE3000?
It varies depending on the adapter. The adapter that comes
with the JUMPSURGE3000 is a 5V/3A, and its charging time
is of approximately 6 hours.
Q3: How to turn off the JUMPSURGE3000?
The device will automatically power off after 10 seconds
without operation.
EN | 13
WARRANTY
FCC WARNINGS
TOPDON One Year Limited Warranty
TOPDON warrants to its original purchaser that the
company's products will be free from defects in material
and workmanship for 12 months from the date of purchase
(Warranty Period). TOPDON will repair or replace the
defective part or product for the defects reported during
the Warranty Period according to its technical support
analysis and conrmation.
TOPDON shall not be liable for any incidental or
consequential damages arising from the device's use,
misuse, or mounting. Some states do not allow limitations
on how long an implied warranty lasts, so the above
limitations may not apply to you.
This limited warranty is void under the following
conditions:
-Product misused, disassembled, altered, or repaired by
unauthorized stores or technicians.
-Careless handling and violation of the device's operation.
Notice: All information in this manual is based on the latest
information available at the time of publication, and no
warranty can be made for its accuracy or completeness.
TOPDON reserves the right to make changes at any time
without notice.
This device complies with Part 15 of the FCC Rules. Its
operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may
cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the issue by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Contact an experienced radio/TV technician for help.
EN | 15
DEUTSCH
DE | 17
WILLKOMMEN
Über
SICHERHEITSHINWEISE
Vielen Dank, dass Sie sich für JUMPSURGE3000 entschieden
haben. Falls während der Inbetriebnahme dieses Produkts
Probleme auftreten, wenden Sie sich bitte an support@
topdon.com, um ofziellen technischen Support zu
erhalten.
JUMPSURGE3000 dient als tragbare Starthilfe, der 3000
Spritzenstrom liefert, um eine 12-V-Bleisäurebatterie in
Sekundenschnelle zu starten. Es unterstützt schnelle und
sichere Starts für 12-V-Autos, Boote, Motorräder, ATVs,
Rasenmäher, Wohnwagen, Traktoren, Lastwagen usw.
Außerdem liefert er für bis zu 9.0-Liter-Benzin- oder
7,0-Liter-Dieselmotoren 45-facher Boost-Fähigkeit mit einer
einzigen Ladung.
Es kann auch als Powerbank benutzt werden, um
elektronische Geräte wie Handys und Tablets schnell
aufzuladen oder Gleichstromgeräte mit Strom zu versorgen.
Bitte lesen Sie bitte diese Bedienungsanleitung sorgfältig
durch und bewahren Sie diese zum späteren Nachlesen auf.
1. Verwenden Sie NUR die mit diesem Produkt gelieferten
Batterieklemmen.
2. Verwenden Sie das Produkt nicht, wenn das Netzkabel
oder der Starthilfe beschädigt ist.
3. Dieses Produkt kann nur zum Anlassen von Fahrzeugen
mit 12-Volt-Blei-Säure-Batterien verwendet werden.
4. Nur Autos mit Starthilfe starten, wenn der Batteriestand
der Starthilfe mehr als 50 % beträgt.
5. Falls das im ersten Anlauf nicht klappt, trennen Sie
die Klemmen von der Autobatterie und warten Sie
mindestens 20 Sekunden, bevor Sie sie wieder anschließen.
Versuchen Sie NICHT mehr als 3 aufeinanderfolgende
Starthilfeversuche innerhalb von 2 Minuten.
6. Lassen Sie das Produkt nicht in einer extrem
heißen Umgebung stehen (einschließlich direkter
Sonnenbestrahlung).
7. Zerlegen Sie keinesfalls das Produkt selbst!
8. Stellen Sie das Produkt NICHT für längere Zeit in eine
extreme Umgebung. Die Betriebstemperatur beträgt
-10~40(14 ~104 ).
9. Überprüfen Sie den Batteriestand dieses Produkts alle
zwei Monate und laden Sie es regelmäßig auf
10. Ein Lithium-Ionen-Akku ist im Produkt integriert.
Entsorgen Sie das Produkt am Ende seiner Lebensdauer
gemäß den geltenden gesetzlichen Vorschriften.
PAKETUMFANG
JUMPSURGE 3000
Batterieklemmen
USB Kabel
Adapter
EVA Tasche
Bedienungsanleitung
DE | 19
PRODUKTÜBERSICHT
LED-
Leuchte
Haken Halter
Batterieklemmen-
Buchse
DC Ausgang
(Max 16,8V/10A)
USB Ausgang
(5V/2A) Typ-C Eingang (5V/3A, 9V/3A, 12V/3A, 15V/3A)
Typ-C Ausgang (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2,25A)
Batteriestandsanzeige
Power-Taste
Statusanzeige Boostknopf
USB Ausgang (5V/3A,
9V/2A, 12V/1,5A)
Griff
Beschreibung der Statusanzeige:
Wenn das Licht dauernd grün leuchtet:
Die Spannung von Fahrzeugbatterie ist normal. Sie können
dem Fahrzeug mit dem JUMPSURGE 3000 Starthilfe
geben.
Wenn das Licht nicht leuchtet:
Die Spannung von Fahrzeugbatterie ist zu niedrig,
um erkannt zu werden. Halten Sie die BOOST-Taste
etwa 3 Sekunden lang gedrückt, bis das Anzeigeslicht
leuchtet. Dann geht die Starthilfe in einen erzwungenen
Ausgangsmodus. Sie müssen das Auto innerhalb von 30
Sekunden starten.
Hinweis: Der erzwungene Ausgangsmodus macht alle
Sicherheitsschutzfunktionen ungültig. Deswegen benutzen
Sie diesen Modus nur, wenn die Fahrzeugbatterie zu niedrig
ist.
Positivklemme (Rot) Negaitvklemme (Schwarz)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100

Topdon JS3000 Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à