Bose Acoustic Wave music system II met cd-wisselaar Le manuel du propriétaire

Catégorie
Lecteur CD
Taper
Le manuel du propriétaire
Acoustic Wave
®
II CD Changer
!"#$%&'()*+,$
-$,+$#*#.'/#0$+1*#.
231+4$(,&*1+0+1'/1+3#
5/#*/0$(,+(+'1%*6+3#+
)$7%*+8'//#"+96+#.
2
Français Español English
Safety Information
Please read this owner’s guide
Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system
properly and enjoy all of its advanced features. Please save this owner’s guide for future reference.
WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.
WARNING: The apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not
be placed on the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can
cause a failure and/or a fire hazard.
CAUTION: To reduce the risk of electric shock, do not disassemble this product unless you are qualified. Refer servicing to quali-
fied service personnel.
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated,
dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical
shock.
The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the pres-
ence of important operating and maintenance instructions in this owner’s guide.
Class B emissions
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations (Canada only).
CAUTION: To
prevent electric shock, match the wide blade of the line cord plug to the wide slot of the AC (mains) receptacle. Insert
fully.
CAUTION: Us
e of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure. The compact disc player should not be adjusted or repaired by anyone except properly qualified service personnel.
CAUTION: Make no modifications to the system or accessories. Unauthorized alterations may compromise safety, regulatory
compliance, and system performance.
Class 1 laser product
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
This CD player is classified as a CLASS 1 LASER PRODUCT according to
EN 60825-1:1994+A1+A2, IEC 60825-1:1993+A1+A2.
WARNING:
K
eep the remote control battery away from children. It may cause a fire or chemical burn if mishandled. Do not recharge,
disassemble, heat above 100
º
C (212
º
F), or incinerate. Dispose of used batteries promptly. Replace only with a battery of the correct type
and model number.
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with Duracell, Eveready, Energizer, Maxell, Toshiba,
or Shun Wo CR2032 or DL2032 3-volt lithium battery.
Please dispose of used batteries properly,
following any local regulations. Do not incinerate.
WARNING: No naked flame sources, such as lighted candles, should be placed on the apparatus.
Note: Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily
operable.
This product conforms to the EMC Directive 89/336/EEC and to the Low Voltage Directive 73/23/EEC. The complete Declara-
tion of Conformity can be found at www.bose.com/static/compliance/index.html.
©2006 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission. All trademarks
referenced herein are property of Bose Corporation. The Acoustic Wave
®
music system II design is a registered trademark of Bose Corporation.
AWMSIIFp_OG.book Page 2 Thursday, July 13, 2006 11:15 AM
Important Safety Instructions
English FrançaisEspañol
1. Read these instructions – for all components
before using this product.
2. Keep these instructions – for future reference.
3. Heed all warnings – on the product and in the
owner’s guide.
4. Follow all instructions.
5. Do not use this apparatus near water or
moisture – Do not use this product near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet base
-
ment, near a swimming pool, or anywhere else that
water or moisture are present.
6. Clean only with a dry cloth – and as directed by
Bose Corporation. Unplug this product from the wall
outlet before cleaning.
7. Do not block any ventilation openings. Install in
accordance with the manufacturers instruc
-
tions – To ensure reliable operation of the product and
to protect it from overheating, put the product in a
position and location that will not interfere with its
proper ventilation. For example, do not place the
product on a bed, sofa, or similar surface that may
block the ventilation openings. Do not put it in a built-
in system, such as a bookcase or a cabinet that may
keep air from flowing through its ventilation openings.
8. Do not install near any heat sources, such as
radiators, heat registers, stoves or other appa
-
ratus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding-type plug has two blades and a third
grounding prong. The wider blade or third prong
are provided for your safety. If the provided plug
does not fit in your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod,
bracket or table specified by the
manufacturer or sold with the appa-
ratus. When a cart is used, use cau-
tion when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time – to
prevent damage to this product.
14. Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus
has been damaged in any way: such as power-
supply cord or plug is damaged; liquid has been
spilled or objects have fallen into the apparatus;
the apparatus has been exposed to rain or mois
-
ture, does not operate normally, or has been
dropped – Do not attempt to service this product
yourself. Opening or removing covers may expose you
to dangerous voltages or other hazards. Please call
Bose to be referred to an authorized service center
near you.
15. To prevent risk of fire or electric shock, avoid
overloading wall outlets, extension cords, or
integral convenience receptacles.
16. Do not let objects or liquids enter the product
as they may touch dangerous voltage points or short-
out parts that could result in a fire or electric shock.
17. See product enclosure bottom for safety related
markings.
Information about products that generate
electrical noise
If applicable, this equipment has been tested and found to
comply with the limits for a Class B digital device, pursu
-
ant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interfer
-
ence in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, this is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment to an outlet on a different circuit
than the one to which the receiver is connected.
Consult the dealer or an experienced radio/TV techni-
cian for help.
Note: Unauthorized modification of the receiver or radio
remote control could void the user’s authority to operate this
equipment.
This product complies with the Canadian ICES-003 Class
B specifications.
AWMSIIFp_OG.book Page 2 Thursday, July 13, 2006 11:15 AM
Important Safety Instructions
Français Español English
18. Use Proper Power Sources – Plug the product into
a proper power source, as described in the operating
instructions or as marked on the product.
19. Avoid Power Lines – Use extreme care when install-
ing an outside antenna system to keep from touching
power lines or circuits, as contact with them may be
fatal. Do not install external antennas near overhead
power lines or other electric light or power circuits, nor
where an antenna can fall into such circuits or power
lines.
20. Ground All Outdoor Antennas – If an external
antenna or cable system is connected to this product,
be sure the antenna or cable system is grounded. This
will provide some protection against voltage surges
and built-up static charges.
Section 810 of the National Electrical Code ANSI/
NFPA No. 70 provides information with respect to
proper grounding of the mast and supporting struc
-
ture, grounding of the lead-in wire to an antenna dis-
charge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding elec
-
trodes, and requirements for the ground electrode.
Refer to the antenna grounding illustration on this
page.
Antenna grounding
Example of antenna grounding as per National Electrical
Code, ANSI/NFPA 70.
Antenna lead-in wire
Antenna discharge unit
(NEC Section 810-20)
Grounding conductors
(NEC Section 810-21)
Ground clamps
Power service grounding electrode
system (NEC ART 250, Part H)
Electric service
equipment
Ground clamp
Note to CATV system installer
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC (of USA)
that provides guidelines for proper grounding. In particular,
it specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as is practical.
AWMSIIFp_OG.book Page 3 Thursday, July 13, 2006 11:15 AM
3
Contents
Setting Up Your Acoustic Wave
®
II CD Changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features and benefits of the Acoustic Wave
®
II CD changer . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Unpacking the carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Selecting a location for your music system and changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Seating your Acoustic Wave
®
music system II on the CD changer . . . . . . . . . . . . . . . . . . . . . 5
Making the connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the Acoustic Wave
®
II CD changer control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Turning your system on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Loading/unloading discs into the CD changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selecting the CD player or CD changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Playing CDs in the CD changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Listening to an External Audio Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting an external audio source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Playing a connected audio source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Replacing the remote control battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
English FrançaisDeutsch Italiano Nederlands
AWMSIIFp_OGTOC.fm Page 3 Thursday, July 13, 2006 11:50 AM
4
Français Español English
Setting Up Your Acoustic Wave
®
II CD Changer
Features and benefits of the Acoustic Wave
®
II CD changer
Thank you for selecting the Bose
®
Acoustic Wave
®
II CD changer accessory. Combining this
product with your Acoustic Wave
®
music system II provides you with some valuable benefits:
A six-disc music system – One disc player in the Acoustic Wave
®
music system II plus
five additional disc slots in the Acoustic Wave
®
II CD changer allows you to load and play
up to six audio CDs, providing hours of uninterrupted CD music.
Elegant integrated pedestal design – Using the same table-top space as the Acoustic
Wave
®
music system II, the CD changer complements the elegance and simplicity of the
system.
One integrated remote control – Provides the simplicity of using one remote control
and one-touch selection of all built-in sources.
Multiple source switching – Using the rear-panel auxiliary (AUX) input jacks, you can
enjoy listening to one or two other audio sources in your home through the Acoustic Wave
®
music system II.
Unpacking the carton
Carefully unpack your Acoustic Wave
®
II CD changer. Save all packing materials for possible
future use. The original packing materials provide the safest way to transport your new multi-
disc changer.
Check to be sure you received both parts identified in Figure 1. If either part appears to be
damaged, do not attempt to use it. Notify Bose Customer Service immediately (see phone
numbers on the inside back cover).
WARNING: To avoid danger of suffocation, keep the plastic bags out of the reach of children.
Figure 1
Carton contents
AU
X
1
A
U
X
2
O
N
/
O
F
F
P
la
y
/
P
a
u
se
S
t
o
p
N
e
x
t
D
i
s
c
R
an
d
o
m
Remote control
Acoustic Wave
®
II
CD changer
For your records
Now is a good time to record the serial number of your Acoustic Wave
®
II CD changer here and on your product
registration card. The serial number is located on the back panel.
Serial number: _____________________________ Purchase date: _________________________________________
We suggest you keep your sales receipt and a copy of your product registration card together with this owner’s guide.
AWMSIIFp_OG.book Page 4 Thursday, July 13, 2006 11:15 AM
5
Setting Up Your Acoustic Wave
®
II CD Changer
English FrançaisEspañol
Selecting a location for your music system and changer
The Acoustic Wave
®
II CD changer is designed to fit under your Acoustic Wave
®
music sys-
tem II. Before you connect the two, however, select a good location for the stacked units.
When choosing the location, remember that the tonal quality of your Acoustic Wave
®
music
system II, as with any high-performance sound system, will vary with room placement.
Feel free to try different locations, but keep the following guidelines in mind:
The Acoustic Wave
®
music system II is designed to sound best when placed on a shelf,
counter, desk, or table top, 30 to 48 inches (75 to 120 cm) from the floor.
The CD player in the Acoustic Wave
®
music system II needs an allowance of several inches
for the CD cover on top of the music system to open.
The Acoustic Wave
®
music system II should be near the center of a wall and 6 inches (15
cm), or less, away from the wall.
To increase the bass response, move the unit toward any corner of the room; to decrease
bass response, move it away from the corner.
Seating your Acoustic Wave
®
music system II on the CD changer
With the CD changer in your chosen location, carefully set your Acoustic Wave
®
music
system II on top of the CD changer (Figure 2a).
Make sure the Acoustic Wave
®
music system II fits onto the raised guides on top of the CD
changer.
Make sure the Acoustic Wave
®
music system II sits flat and the side edges of both units are
aligned.
Make sure there is a clear optical path in front of the unit to allow the infrared emitters and
receivers to communicate (
Figure 2b).
Figure 2
Seating the Acoustic Wave
®
music system on the CD
changer
(a)
(b)
Raised
guides
IR signal
emitters
IR signal
receivers
TM
TM
AWMSIIFp_OG.book Page 5 Thursday, July 13, 2006 11:15 AM
6
Setting Up Your Acoustic Wave
®
II CD Changer
Français Español English
Making the connections
Before you start this setup procedure, disconnect the AC power cord on your
Acoustic Wave
®
music system II and set it aside. You will need to use it again in
Step 3.
On the back of the CD changer there are two cables that connect to your Acoustic Wave
®
music system II.
1. Insert the two connectors of the AUX input cable into AUX IN jacks on the back of the
music system (
Figure 3). Be sure to match the colors of the connectors and jacks: red to
red, and white to white.
2. Plug the attached CD changer power cord into the AC power jack on the back of the
music system.
3. Plug the small end of the power cord into the power jack on the back of the CD changer.
4. Plug the other end of the power cord into an AC (mains) wall outlet.
After applying power, “PLEASE WAIT” appears on the display for about 30
seconds while the system prepares itself for operation. DO NOT insert any
discs until this message disappears.
Figure 3
Connecting cables and
power cords
Acoustic Wave
®
music system II
AC power cable
AUX input
cable
CD changer power jack
Acoustic Wave
®
music
system II power jack
AUX IN jacks
2
3
4
1
TM
AWMSIIFp_OG.book Page 6 Thursday, July 13, 2006 11:15 AM
7
English FrançaisEspañol
Operating Your System
Using the remote control
The remote control included with your Acoustic Wave
®
II CD changer allows you to control
functions of both the CD changer and your Acoustic Wave
®
music system II. Therefore, you
only need this remote to control your system.
Just aim the remote at the system and press the
buttons. The remote normally works within 20 feet of the front panel.
If the remote stops operating or its range seems reduced, it may be time to replace the
battery. For instructions, refer to “Replacing the remote control battery” on page 13.
The information in Figure 4 describes the buttons used for playing CDs and selecting auxiliary
inputs. For controlling other functions of the Acoustic Wave
®
music system II, see the owner’s
guide that came with it.
Notes:
Press-and-hold operations require holding the button down for at least one second.
Pressing FM, AM, CD, or AUX automatically turns on the system to the source selected.
The remote can select an external audio source that is connected to the changer, but cannot
turn the source on or off or change its settings.
Figure 4
Acoustic Wave
®
II CD
changer remote control
Throughout this owner’s guide, you will see button icons to the left of the operating instructions.
These icons refer to buttons located on the remote control.
On/Off
Turns the system on or off (page 8).
Seek/Track
Skips to next/previous CD track
(page 10).
Tune/MP3
Scans forward/backward through a CD
track (page 10).
CD
Selects the CD source in the Acoustic
Wave
®
music system II (page 9).
Presets/Discs
Selects CD changer slots 1-5 (page 10).
Stop
Stops a playing CD (page 10).
Play/Pause
Plays a CD or pauses a playing
CD (page 10).
Play Mode
Selects repeat and random CD play
modes (page 10).
Next Disc
Moves to next CD in the changer (page 10).
CD Changer
Selects the CD changer and turns
it on if it is off (page 9).
AUX 1-2
Selects the AUX 1 or AUX 2 input jack
on the rear panel of the CD changer
(page 12).
AWMSIIFp_OG.book Page 7 Thursday, July 13, 2006 11:15 AM
8
Operating Your System
Français Español English
Using the Acoustic Wave
®
II CD changer control panel
The Acoustic Wave
®
II CD changer control panel provides playback control buttons and a
display for operating the changer only. It cannot control any functions of the Acoustic Wave
®
music system II.
Figure 5 describes the control buttons and display window.
Figure 5
CD changer control buttons
and display functions
Play/Pause Stop Next Disc CD Mode
AUX 1 AUX 2
ON/OFF
CHANGER
DISC TRACK
AUX 1/AUX 2
Selects the AUX 1/2 source,
and automatically turns on
the system if it is off.
Play/Pause
Plays or pauses the
selected CD.
Stop
Stops the currently
playing CD.
Seek/Track
Press: Skips to next/previous CD track.
Press and hold: Scans forward/backward
through a CD track.
Next Disc
Moves to the next CD in
the changer.
CD Mode
Selects repeat and
random CD play
modes.
On/Off
Turns CD changer
on or off.
Selected disc slot
Track number Play/pause indicator
Elapsed time
Turning your system on or off
To turn on the complete system, press On/Off on the CD changer control panel or press
the changer select button CD on the remote. For other power on/off controls, see
Figure 6.
Figure 6
Power on/off controls of the
complete system
Turns on the complete
system and plays a CD
in the changer.
Selects and turns on the CD
changer.
Turns on the Acoustic Wave
®
music system II if it is off.
Turns on the complete system and switches the Acoustic
Wave
®
music system II to the AUX source.
Only turns off the CD changer.
Turns only the Acoustic
Wave
®
music system II
on or off.
Turns on only the Acoustic
Wave
®
music system II.
Turns off the complete system.
TM
AWMSIIFp_OG.book Page 8 Thursday, July 13, 2006 11:15 AM
9
Operating Your System
English FrançaisEspañol
Loading/unloading discs into the CD changer
The Acoustic Wave
®
II CD changer holds up to five CDs. When a CD is inserted into a slot in
the changer and it is on, the changer’s display window indicates the number of the CD slot
selected, the track number playing, and the elapsed time (see
Figure 5).
To load a CD into the changer, insert one edge of the disc into an empty slot and push the
disc all the way in (
Figure 7). The LED indicator to the right of each slot indicates the status.
Figure 7
Loading discs
AU
X 1
A
UX
2
O
N/O
FF
P
l
a
y
/
P
a
u
s
e
S
t
o
p
N
e
x
t
D
i
s
c
R
a
n
d
o
m
S
k
i
p
/
S
c
a
n
Disc slot eject buttons
Disc slot status indicators
Off ........... Empty disc slot.
Amber.... The slot contains a CD,
but it is not currently
selected. The amber
light flashes while a slot
is ejecting a disc.
Green..... The current disc slot.
The green light flashes
while the changer
switches to this slot.
TM
To remove a CD from a changer slot, press the Eject button to the right of the status
indicator for that slot. Allow a few seconds for the mechanism to respond.
CAUTION:
DO NOT INSERT mini CDs or non-circular CDs into any disc slot. The CD changer may not
properly play or eject them.
DO NOT INSERT more than one disc at a time into any disc slot.
Doing either of the above can cause damage to the disc and/or the CD changer.
Selecting the CD player or CD changer
Using the Acoustic Wave
®
II CD changer provides access to up to six CDs, one in the
Acoustic Wave
®
music system II and five in the CD changer.
To use the Acoustic Wave
®
music system II CD player:
Press CD on the remote control or on the Acoustic Wave
®
music system II control panel to
turn on (if off) the Acoustic Wave
®
music system II and select the CD player.
For complete instructions on operating the CD player, refer to your Acoustic Wave
®
Music
System II Owner’s Guide.
AWMSIIFp_OG.book Page 9 Thursday, July 13, 2006 11:15 AM
10
Operating Your System
Français Español English
To use the Acoustic Wave
®
II CD changer:
Stop Next Disc CD Mode
ON/OFF
CHANGER
TRACK
Press CD changer on the remote control, or press On/Off on the CD changer control panel
to turn on (if off) the complete system and select the CD changer.
Playing CDs in the CD changer
Press Play/Pause to start playing the selected CD. Press again to pause it. While a CD is
playing, the display tells you the disc slot number, track number, and elapsed time.
Press Seek/Track once to skip to the beginning of the current track. Press again
within three seconds to skip to the beginning of the previous track.
Press Seek/Track once to skip to the next track.
Press and hold Tune/MP3 < or Tune/MP3 > to quickly scan backward or forward through
a track.
Press Stop to stop the currently playing CD.
Press Next Disc to move to the next disc slot. The disc slot number on the display tells
you which slot is currently selected.
OR
Press Preset/Disc 1-5 to move to a specific disc slot.
Press Play Mode repeatedly until the play mode you want is displayed.
Displayed mode Description
REPEAT ALL Repeats all tracks and discs in numerical order.
REPEAT ALL RANDOM Repeats all tracks and discs in random order.
REPEAT DISC Repeats all tracks on selected disc in numerical order.
REPEAT DISC RANDOM Repeats all tracks on selected disc in random order.
AWMSIIFp_OG.book Page 10 Thursday, July 13, 2006 11:15 AM
11
English FrançaisEspañol
Listening to an External Audio Source
Connecting an external audio source
The Acoustic Wave
®
II CD changer provides two rear-panel inputs (AUX 1 and AUX 2) for
connecting external audio devices such as a TV, VCR, DVD player, cassette player, or MP3
player. This gives you the advantage of hearing Acoustic Wave
®
music system II sound from a
range of sources.
To make the connection, use an appropriate stereo cable (not included).
1. Connect one end of the cable to the audio output jacks of the device and the other end to
one set of AUX input jacks on the changer (
Figure 8). Be sure to match the red and white
plugs on the cable to the red (R) and white (L) AUX jacks on the changer.
2. Repeat Step 1 to connect another device.
3. Plug the device into an AC outlet.
Figure 8
External audio device
connections
Audio device
AUX 1 INPUT
AUX 2 INPUT
AWMSIIFp_OG.book Page 11 Thursday, July 13, 2006 11:15 AM
12
Listening to an External Audio Source
Français Español English
Playing a connected audio source
To listen to a connected source:
1. Turn on the external audio device.
2. Press AUX 1-2 on the Acoustic Wave
®
II CD changer remote control. Press AUX 1-2
again to switch between the AUX 1 and AUX 2 inputs. AUX 1 or AUX 2 appears on the
display to confirm your selection (
Figure 9).
3. Adjust the volume using the remote control.
Note: The Acoustic Wave
®
II CD changer remote control cannot turn a connected AUX device
on or off, or change its settings or selections.
Figure 9
Acoustic Wave
®
II CD
changer sample AUX
display
Play/Pause Stop Next Disc Random
AUX 1 AUX 2
ON/OFF
AUX
AWMSIIFp_OG.book Page 12 Thursday, July 13, 2006 11:15 AM
13
English FrançaisEspañol
Care and Maintenance
Replacing the remote control battery
If your remote control does not work properly, or its range of operation is reduced, it is time to
replace the battery. Follow the instructions below:
1. Place the remote control face down on a flat surface.
2. Using your finger, push the tab lock to the side as shown and hold (Figure 10a). Slide the
battery compartment open.
3. Keeping the remote control face down, insert the new battery into the compartment with
the + symbol facing up (
Figure 10b).
4. Gently slide the battery compartment closed. It locks automatically.
Figure 10
Remote control battery
replacement
See operating
instructions for types of
battery to be used
See operating
instructions for types of
battery to be used
Positive
symbol
Tab
(a)
(b)
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type. Replace only with a lithium CR2032 or DL2032 3-volt battery by Duracell,
Eveready, Energizer, Maxell, New Sun, or Toshiba (available from most electronics stores).
WARNING: Mishandling the remote control battery may cause a fire or chemical burn. Keep
the battery away from children. Do not recharge, disassemble, heat above 212 °F (100 °C), or
incinerate the battery. Dispose of the used battery promptly and responsibly.
For more information, call Bose
®
Customer Service. Refer to the phone numbers on the inside
back cover of this guide.
AWMSIIFp_OG.book Page 13 Thursday, July 13, 2006 11:15 AM
14
Care and Maintenance
Français Español English
Troubleshooting
Problem What to do
No system operation
Make sure the power cord for the Acoustic Wave
®
II CD changer is completely plugged in
both at the changer jack and at the wall outlet.
No sound or
sound is muffled
If the Acoustic Wave
®
II CD changer or an audio device connected to it is playing, make
sure that the “AUX” source indicator appears on the Acoustic Wave
®
music system II dis-
play.
If the source is AUX 1 or AUX 2, make sure that the connected audio device is plugged in
and turned on, and make sure the stereo cable is properly connected between the two
units.
Make sure that both the Acoustic Wave
®
II CD changer and the Acoustic Wave
®
music
system II are plugged into functioning power outlets, and are turned on.
Check the connection of the Acoustic Wave
®
music system II to the changer. Make sure
the two RCA connectors are firmly inserted, red to red, and white to white, into the AUX IN
jacks on the Acoustic Wave
®
music system II. Refer to “Making the connections” on
page 6.
Make sure nothing is blocking or preventing the IR signals emitted by the CD changer
from reaching the receiver on the front of the Acoustic Wave
®
music system II. Refer to
“Selecting a location for your music system and changer” on page 5.
CD skips Make sure the system is in a location where it cannot get bumped. If so, move it to a more
protected location.
Check the CD for smudges or dirt. Wipe the CD (NOT in a circular pattern, but straight out
from the center) to it clean off.
CD does not play Make sure you have selected the CD changer.
If you have selected the CD changer, make sure the AUX indicator appears on the
Acoustic Wave
®
music system II display. If not, press the AUX button on the music
system console.
Make sure there is a CD in the selected CD changer slot.
A CD is playing, but none
of the CD changer LEDs is
lit
Check to see if the CD player in the Acoustic Wave
®
music system II is on and playing,
instead of the CD changer.
CD changer does not
eject a disc
Disconnect the system power cord from the AC outlet, wait a few seconds, and plug it in
again.
Customer Service
For additional help in solving problems, contact Bose
®
Customer Service. Refer to the
address list on the inside back cover of this guide.
AWMSIIFp_OG.book Page 14 Thursday, July 13, 2006 11:15 AM
15
Care and Maintenance
English FrançaisEspañol
Limited warranty
What is covered:
All parts defective in material or workmanship.
For how long:
Two years (one year, Europe) from the purchase date.
What we will do:
We will, at our sole option, repair or replace any defective parts free of charge.
What you must do:
A. Call Bose
®
Customer Service and ask for shipping instructions.
B. Properly pack the unit, if possible, in the original carton for shipping.
Other conditions:
This limited warranty is fully transferable for the one-year period following purchase.
THE PROVISIONS OF THIS LIMITED WARRANTY ARE IN LIEU OF ANY OTHER WARRANTY,
WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BOSE CORPORATION’S
MAXIMUM LIABILITY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU
FOR THE PRODUCT. IN NO EVENT SHALL BOSE BE LIABLE FOR SPECIAL, INCIDENTAL,
CONSEQUENTIAL, OR INDIRECT DAMAGES.
This limited warranty does not cover a defect that has resulted from improper or unreason-
able use or maintenance, accident, improper packing, or unauthorized tampering, alteration,
or modification as determined solely by us. This limited warranty is void if the label bearing
the serial number has been removed or defaced.
Other Legal Rights:
This limited warranty gives you specific legal rights, and you also may have other rights that
vary from state to state or country to country. Some places do not allow limitations on implied
warranties or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
Technical Information
Multi-disc changer power rating
222V-240V~ 50/60 Hz 80W (80W max., combined with the Acoustic Wave
®
music
system II)
Dimensions
3
1
/
4
"H x 18"W x 8
3
/
8
"D (8.7 cm x 45.7 cm x 21.1 cm)
Weight
6.7 lb (3.1 kg)
Color
Graphite Gray or Platinum White
AWMSIIFp_OG.book Page 15 Thursday, July 13, 2006 11:15 AM
2
Français Deutsch English
Sicherheitshinweise
Lesen Sie diese Bedienungsanleitung aufmerksam durch.
Beachten Sie alle Hinweise sorgfältig. Die Anleitung unterstützt Sie beim Aufbau und ordnungsgemäßen Betrieb des Systems
und seiner modernen Funktionen. Bewahren Sie diese Bedienungsanleitung zum späteren Nachschlagen auf.
WARNUNG: Um Brände und Stromschläge zu vermeiden, darf dieses Produkt weder Regen noch Feuchtigkeit ausgesetzt
werden.
WARNUNG: Schützen Sie das Gerät vor tropfenden oder spritzenden Flüssigkeiten, und stellen Sie keine mit Flüssigkeiten
gefüllten Gefäße (z. B. Vasen) auf das Gerät. Wie bei allen elektronischen Geräten dürfen niemals Flüssigkeiten ins Innere gelangen.
Dadurch kann es zu Fehlfunktionen oder Bränden kommen.
ACHTUNG: Um Stromschläge zu vermeiden, darf dieses Produkt nur von qualifiziertem Personal zerlegt werden. Wenden Sie
sich bei allen Reparatur- und Wartungsarbeiten nur an qualifiziertes Kundendienstpersonal.
Das Blitzsymbol mit Pfeilspitze in einem gleichseitigen Dreieck weist den Benutzer auf nicht isolierte, gefährliche
elektrische Spannung innerhalb des Systemgehäuses hin. Es besteht die Gefahr von Stromschlägen!
Das Ausrufezeichen in einem gleichseitigen Dreieck, wie es auf dem System angebracht ist, soll den Benutzer auf
wichtige Bedienungs- und Wartungsanweisungen in dieser Bedienungsanleitung aufmerksam machen.
Class B Emissions
Dieses Gerät der Klasse B entspricht den Anforderungen der Canadian Interference-Causing Equipment Regulations (nur Kanada).
ACHTUNG: Stecken Sie zur
Vermeidung von Stromschlägen den breiten Kontakt des Netzkabelsteckers vollständig in den breiten
Schlitz. Überzeugen Sie sich vom korrekten Sitz des Steckers.
ACHTUNG: Bei
unsachgemäßem Gebrauch besteht die Gefahr, dass aus dem Gerät Strahlung austritt. Reparatur- und
Wartungsarbeiten müssen von qualifiziertem Kundendienstpersonal durchgeführt werden.
ACHTUNG: Nehmen Sie keine Veränderungen am System oder am Zubehör vor. Nicht autorisierte Veränderungen können die
Sicherheit, die Erfüllung von Richtlinien und die Systemleistung beeinträchtigen.
Klasse 1 Laser-Produkt
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
Dieser CD-Player ist ein LASER-PRODUKT DER KLASSE 1 gemäß
EN 60825-1:1994+A1+A2, IEC 60825-1:1993+A1+A2.
WARNUNG:
Halten Sie die Batterien der Fernbedienung außerhalb der Reichweite von Kindern. Die falsche Behandlung der
Fernbedienungsbatterie kann Brände oder Verätzungen verursachen. Versuchen Sie nicht, die Batterie wiederaufzuladen, auseinander zu
nehmen, auf eine Temperatur von über 100
º
C zu erhitzen oder zu verbrennen. Entsorgen Sie verbrauchte Batterien sofort. Ersetzen Sie
Batterien nur durch Batterien des richtigen Typs und der richtigen Modellnummer.
WARNUNG: Bei falsch eingelegter Batterie besteht Explosionsgefahr. Verwenden Sie nur 3-Volt-Lithium-Batterien CR2032 oder
DL2032 von Duracell, Eveready, Energizer, Maxell, Toshiba oder Shun Wo.
Leere Batterien müssen getrennt entsorgt werden
und gehören nicht in den Hausmüll. Verbrennen Sie keine Batterien.
WARNUNG: Stellen Sie keine brennenden Kerzen und kein offenes Licht auf das Gerät.
Hinweis: Falls Sie den Netzstecker oder eine Mehrfachsteckdose verwenden, um das Gerät von der Stromversorgung zu
trennen, sollten Sie sicherstellen, dass Sie jederzeit auf den Stecker zugreifen können.
Dieses Produkt entspricht den Bestimmungen der EMV-Richtlinie 89/336/EWG und der Niederspannungs-Richtlinie 73/23/EWG.
Die vollständige Konformitätserklärung ist einsehbar unter www.bose.com/static/compliance/index.html.
©2006 Bose Corporation. Dieses Dokument darf ohne vorherige schriftliche Genehmigung weder ganz noch teilweise reproduziert, verändert, vertrieben
oder in anderer Weise verwendet werden. Alle hier genannten Warenzeichen sind Eigentum der Bose Corporation. Das Design des Acoustic Wave
®
Music
System II ist ein eingetragenes Warenzeichen der Bose Corporation.
AWMSIIFp_OG.book Page 2 Thursday, July 13, 2006 11:48 AM
3
Inhalt
Aufbau des Acoustic Wave
®
II CD-Wechslers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Merkmale und Vorteile des Acoustic Wave
®
II CD-Wechslers . . . . . . . . . . . . . . . . . . . . . . . . . 4
Auspacken des Kartons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Auswählen eines Standorts für das Music System und den CD-Wechsler . . . . . . . . . . . . . . . 5
Aufsetzen des Acoustic Wave
®
Music System II auf den CD-Wechsler . . . . . . . . . . . . . . . . . 5
Anschließen der Kabel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Betrieb des Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Verwendung der Fernbedienung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Verwendung des Kontrollfelds des Acoustic Wave
®
II CD-Wechslers . . . . . . . . . . . . . . . . . . . 8
Ein- und Ausschalten des Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CDs in den CD-Wechsler einlegen und daraus entnehmen . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CD-Player oder CD-Wechsler auswählen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CDs im CD-Wechsler abspielen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Externe Audioquellen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Anschließen einer externen Audioquelle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Wiedergabe von einer angeschlossenen Audioquelle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Pflege und Wartung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Austausch der Batterie der Fernbedienung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Fehlersuche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Kundendienst . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Eingeschränkte Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Technische Daten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Deutsch
AWMSIIFp_OG.book Page 3 Thursday, July 13, 2006 11:48 AM
4
Français Deutsch English
Aufbau des Acoustic Wave
®
II CD-Wechslers
Merkmale und Vorteile des Acoustic Wave
®
II CD-Wechslers
Vielen Dank, dass Sie sich für den Acoustic Wave
®
II CD-Wechsler von Bose
®
entschieden
haben. Die Kombination dieses Produkts mit Ihrem Acoustic Wave
®
Music System II bringt
Ihnen einige wertvolle Vorteile:
Ein Musiksystem für sechs Discs – Wenn Sie den Disc-Player im Acoustic Wave
®
Music
System II und die fünf zusätzlichen CD-Fächer im Acoustic Wave
®
II CD-Wechsler nutzen,
können Sie bis zu sechs Musik-CDs einlegen und so mehrere Stunden lang ohne
Unterbrechung Musik hören.
Elegantes Sockeldesign – Der CD-Wechsler hat dieselbe Grundfläche wie das Acoustic
Wave
®
Music System II und fügt sich nahtlos in die schlichte Eleganz des Systems ein.
Integrierte Fernbedienung – Mit einer Fernbedienung lassen sich alle integrierten
Quellen auswählen und steuern.
Wechsel zwischen mehreren Quellen – Indem Sie die AUX-Eingänge auf der Rückseite
nutzen, können Sie über das Acoustic Wave
®
Music System II eine oder zwei weitere
Audioquellen hören.
Auspacken des Kartons
Packen Sie den Acoustic Wave
®
II CD-Wechsler vorsichtig aus. Bewahren Sie das
Verpackungsmaterial zur späteren Verwendung auf. In der Originalverpackung können Sie
das System zu einem späteren Zeitpunkt sicher transportieren.
Überprüfen Sie, ob Sie beide in Abbildung 1 angegebenen Teile erhalten haben. Sollte eines
der Teile beschädigt aussehen, verwenden Sie es nicht. Wenden Sie sich in diesem Fall
unverzüglich an den Bose-Kundendienst (die Telefonnummer finden Sie auf der hinteren
Umschlagseite innen).
WARNUNG: Bewahren Sie Plastikbeutel außerhalb der Reichweite von Kindern auf, um
Erstickungsgefahr zu vermeiden.
Abbildung 1
Kartoninhalt
AU
X
1
A
U
X
2
O
N
/
O
F
F
P
la
y
/
P
a
u
se
S
t
o
p
N
e
x
t
D
i
s
c
R
an
d
o
m
Fernbedienung
Acoustic Wave
®
II
CD-Wechsler
Für Ihre Unterlagen
Es wird empfohlen, dass Sie nun die Seriennummer des Acoustic Wave
®
II CD-Wechslers hier und auf der
Produktregistrierungskarte notieren. Die Seriennummer befindet sich auf der Rückseite des Systems.
Seriennummer: _____________________________ Kaufdatum: ____________________________________________
Bewahren Sie die Kaufquittung und eine Kopie der Produktregistrierungskarte zusammen mit dieser
Bedienungsanleitung auf.
AWMSIIFp_OG.book Page 4 Thursday, July 13, 2006 11:48 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80

Bose Acoustic Wave music system II met cd-wisselaar Le manuel du propriétaire

Catégorie
Lecteur CD
Taper
Le manuel du propriétaire