Amana XPRESS AXP22 Le manuel du propriétaire

Keep these instructions for future

reference. If the equipment changes

ownership, be sure this manual

accompanies equipment. Please refer to

the SAFETY INSTRUCTIONS for important

safety information prior to using this oven.

Owner’s Manual

HIGH SPEED COMMERCIAL COMBINATION OVEN

2

Model Identication

Any questions or to locate an authorized ACP servicer,

call ACP ComServ Service Support.

– Inside the U.S.A. or Canada, call toll-free at 866-

426-2621.

– Outside the U.S.A. and Canada, call 319-368-8120.

– Email: [email protected]

Warranty service must be performed by an authorized

ACP servicer. ACP also recommends contacting an

authorized ACP servicer, or ACP ComServ Service

Support if service is required after warranty expires.

When contacting ACP, provide product information.

Product information is located on oven serial plate.

Record the following information:

Model Number: _____________________________

Serial or S/N Number: ________________________

Date of installation: __________________________

Dealer’s name and address: ___________________

__________________________________________

To avoid risk of electrical shock or death, this oven must be grounded and plug must not be altered.

Grounding/Earthing Instructions

Oven MUST be grounded. Grounding reduces risk of electric shock by providing an escape wire for the electric

current if an electrical short occurs. This oven is equipped with a cord having a grounding wire with

a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

Consult a qualied electrician or servicer if grounding instructions are not completely understood, or

if doubt exists as to whether the oven is properly grounded.

Do not use an extension cord.

If the product power cord is too short, have a qualied electrician install a three-slot receptacle. This

oven should be plugged into a separate circuit with the electrical rating as provided in product specications. When

the combination oven is on a circuit with other equipment, an increase in cooking times may be required and fuses

can be blown.

External Equipotential Earthing Terminal (export only)

Equipment has secondary earthing terminal. Terminal provides external earthing connection used in addition to

earthing prong on plug. Located on outside of oven back, terminal is marked with symbol shown below.

WARNING

Before using your oven, please take the time to read the Safety Instructions which shipped with the oven.

3

Features

1

2

3

4

5

6

7

3

1 Door Handle

Ergonomically designed for one handed operation.

2 Unit Serial Number

Located on the lower left hand side and back of the

oven.

3 Air Filters

The oven has two air lters. Each are located on

the lower sides of the oven. To remove, simply slide

out.

4 Display

Display provides user interface.

5 ON/OFF Pad

Use to turn on and shut oven off.

6 Keypad

Use for time input, programmed pads and data

input.

7 USB Port / Protective Cover

The oven is equipped with an USB Data Port. Use

with standard ash drives.

To program the oven using standard ash drive:

Oven must be in Off mode (Preheat must be OFF)

1. Remove protective cover from bottom of keypad.

2. Insert the ash drive into the slot located below the keypad.

3. From Off, press and hold the “2” pad to go to “User Options”.

4. Go to Option #17 by pressing “Back ” or repeatedly pressing “Enter ”

5. Select the desired operation by highlighting “Transfer card to oven

” or “Transfer oven

to ash drive

” with the Scroll Up or Scroll Down keypad.

Note: After inserting ash drive in USB port wait at least 6 seconds before proceeding to Step 6.

6. Press the “Program

” pad to begin the transfer (The screen will indicate”TRANSFERRING” and indicate

“DONE” when transfer is complete.) Note: The screen will indicate “

NO CARD” if the data key is not

detected.

7. Remove ash drive and close the protective cover.

4

STEP 3 - Install Rack

• Install oven rack

1. Oven cavity must be cool to touch.

2. Place rack in oven with rear guard positioned toward the

. the back of the oven.

• DO NOT cook food directly on oor of oven.

Installation

STEP 2 - Place Oven on Counter

• Recommended countertop surface depth is 26” (66 cm).

• Do not install oven next to or above source of heat, such as pizza oven

or deep fat fryer. This could cause oven to operate improperly and could

shorten life of electrical parts.

• Do not block or obstruct oven lters. Allow access for cleaning.

• Install oven on level countertop surface.

• Outlet should be located so that plug is accessible when oven is in place.

A

C

D

B

To avoid risk of electrical shock or

death, this oven must be grounded

and plug must not be altered.

STEP 1 - Unpack Oven

• Inspect oven for damage such as dents in door or inside oven cavity.

• Report any dents or breakage to source of purchase immediately.

Do not attempt to use oven if damaged.

• Remove all packing materials from oven interior.

• If oven has been stored in extremely cold area, wait a few hours before

connecting power.

Oven Clearances

A—For North American (UL/CSA)

models, allow at least 2” (5.1 cm) of

clearance around top of oven. For

International (50 Hz) models, allow

at least 7” (18 cm) of clearance

around top of oven. Proper air

ow around oven cools electrical

components. With restricted air ow,

oven may not operate properly and

life of electrical parts is reduced.

B—Allow at least 2” (5.1 cm) between air

discharge on back of oven and back

wall.

C—Allow at least 2” (5.1 cm) of

clearance around sides of oven.

D—Install combination oven so oven

bottom is at least 3 feet (91.5 cm)

above oor.

STEP 4 - Oven Operation

Preheating the Oven

This oven can be set to a preheat temperature between

200°F (95°C) and 520°F (270°C).

1. Oven must be plugged in.

2. Press ON / OFF key

3. The preheat temperature of the oven will

appear in the display.

5. PREHEATING icon will display until oven

reaches preheat temperature. The menu

screen will then appear.

TURNING THE OVEN OFF

At the end of the day, turn the oven off by pressing the ON / OFF pad on

the keypad.

The oven fan will continue to run to cool the oven.The oven Cooling

Mode Icon appears and stays on until the oven temperature is below

200°F (95°C) To avoid damage to the convection motor do not turn off

power by unplugging the unit or shutting off the power breaker until the

fan stops.The Oven Off Icon appears for 5 minutes until display goes

blank.

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

5

General User Instructions

COOKING TIPS

1. Metal containers can be used in the AXP with a height no more than 2 inches. Different types of metal

conduct heat at different speeds. Aluminum heats faster than stainless steel. Avoid using silcone pans and

accessories.

2. Stage cooking aids in retaining the quality of frozen and delicate foods. Finishing baked goods at 0%

Microwave, Fan and IR (Radiant) is a great way to get the added browning and crisping without over cooking.

3. Take advantage of the accessories:

a. Non-Stick Basket (SB10 or TB10): Aids in browning and crisping of food. Also makes cleaning up

easier. Great for breaded products like chicken ngers, fries, mozzarella sticks, jalapeno poppers.

b. Baking Sheet (1/4 size): Great for foods that do not need directed heat from the radiant element, and

for foods that may drip any grease or seasoning.

c. Oven Paddle (PA10): Aids in removal of sandwiches and pizza from Convection Express™ and AXP

ovens.

d. Pizza Screen: Great browning and crisping for toasted sandwiches & pizzas, or any food that needs

directed heat from the radiant element.

e. Ceramic Dish: Great for foods that need to be contained such as ready-to-serve foods, cut vegetables

or soups.

f. Pizza Stone(ST10X): Aids in crisping and browning breads and pizzas.

g. Panini Grill Accessory (GR10): Aids in adding grill marks on a product.

4. The most frequently used oven temperature is 520º F (270º C). Reduce the oven temperature if the product is

cooked for an extended period of time.

5. Line the sheet pan with parchment paper for easy removal of food after heating and cleaning.

6. Mufn tins work great for individual cakes & brownies. Spray with cooking spray prior to cooking for easy re-

moval of food after heating.

7. Frequent cleaning prevents unnecessary buildup that may affect the oven performance.

8. Use a cleaner such as ACP Oven Cleaner (CL10) & Oven Shield (SH10) or another cleaning product that does

not contain ammonia, phosphates, chlorine, sodium hydroxide or potassium hydroxide as they can damage

critical oven parts and may void the warranty on those parts.

9. Items will be hot when nished cooking. Be sure to use oven mit, tongs or pizza paddle to safely remove items

from the oven.

WHEN TO USE STAGE COOKING

Stage cooking enables you to use up to four different cooking cycles or stages to be used consecutively without

repeated input from the user.

Example:

Egg Rolls(Frozen), Total Cook Time: 1:30

Temperature 520° F

Stage 1 Stage 2

Time 1:00 :30

Microwave 100% 90%

Fan 80% 60%

IR 100% 100%

6

Touch Panel Symbol Description

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

1

3

2

4

6

5

7 8

0

9

abc def

jklghi

. ’ - #

mno

tuvpqrs wxyz

& /

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

Scroll

Up

Scroll

Down

Use Scroll Up and Scroll

Down to highlight food

categories.

Back

Enter

Menu Screen

ON / OFF

Program

Temperature

Manual Cook

Number

Pads

Stop

Start

ON / OFF Keypad

• Press to preheat oven or turn oven off.

(Fan will continue to run if temperature

is over 200°F / 95°C).

TEMPERATURE Keypad

• Press to check set temperature.

• Press to change temperature.

• Press Number keypads to enter or

change temperature.

• Press Enter to save.

PROGRAM Keypad

• Press to program new product or

change existing programs.

• Press to start data key transfer.

• Press to change password.

EDIT

• Select to program new product or

change existing programs.

DELETE

• Select to delete programs.

MANUAL COOK Keypad

• Press for manual cooking.

7

Touch Panel Symbol Description

SCROLL UP Keypad

• Press to change setting or move up to

another setting.

• Press to move up to another highlighted

area.

SCROLL DOWN Keypad

• Press to change setting or move down to

another setting.

• Press to move down to another

highlighted area.

START Keypad

• Press to start cooking cycle.

• Press to save option in option mode.

STOP / RESET Keypad

• Press to stop cooking cycle.

• Press to exit option in option mode.

BACK Keypad

• Press repeatedly to return to main menu.

• Press to go to previous screen.

• Press repeatedly to exit program mode.

• Press to erase a character.

ENTER Keypad

• Press to save a menu.

• Press to save a MANUAL COOK

program.

• Press to go to next screen.

• Press to save a name.

• Press to conrm deletion of a menu item.

NUMBER Keypads

• Press to input temperature

settings.

• Press to select menu items.

• Press to input names of

menu items.

1

3

2

4

6

5

7 8

0

9

abc def

jklghi

. ’ - #

mno

tuvpqrs wxyz

& /

Oven Cooling Mode Icon:

• The oven fan will continue to run to cool

the oven.The oven Cooling Mode Icon

appears and stays on until the oven

temperature is below 200°F (95°C).

• To avoid damage to the convection motor,

do not turn off power by unplugging the

unit or shutting off the power breaker until

the fan stops.

Oven Off Icon:

• The Oven Off Icon appears for 5 minutes

then the display goes blank.

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

Oven Temperature Out of Range:

• When oven temperature is out

of range of a cooking program

set point. A line will be through

that item or items preventing

it from being selected. Place

the oven in Program Mode to

view temperature set point of

that cooking program. If the

temperature of the oven needs

to be changed after reviewing

temperature for the cooking

program, exit programming

mode and change oven

temperature.

Program

EDIT

View Temperature

Change Oven Temperature

Preheat Temperature Warning Icon:

• Oven not up to temperature

setpoint.

• Preheat temperature warning will

ash when programing cook cycle

until temperature setpoint is met.

8

T

he oven screen displays menu options. The keypad is used to

navigate through onscreen menus.

The icons below will be used throughout this guide to indicate menu navigation.

General User Instructions

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

1

3

2

4

6

5

7 8

0

9

abc def

jklghi

. ’ - #

mno

tuvpqrs wxyz

& /

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

COOKING MENUS

Your ovens ship with the cooking screens set to

three menu levels.

1. The MENU CATEGORIES screen highlights

product categories.

2. The FOOD CATEGORIES screen features

products within the main menu category.

3. The MENU ITEM screen features products

within the food category screen.

NOTE: The oven can be set to operate with 1, 2, or 3

menu levels. See user options for more details.

The ITEM MENU breaks the

item group menu down further allowing you to

input quantities, different food types, etc.

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

1 Biscuit E.B.C.

2 B. fast Croissant

3 Croissant Sand

4 English Mu san

5 Biscuit S.E.C.

6

7

8

9

0

Sandwich

Breakfast

1 Breakfast

2 Poultry

3 Meat

4 Seafood

5 Vegetarian

6

7

8

9

0

Sandwich

THREE MENU LEVELS

TWO MENU LEVELS

ONE MENU LEVEL

Scroll

Up

Scroll

Down

Use Scroll Up and

Scroll Down to

highlight food

categories

Back

1 Breakfast

2 Poultry

3 Meat

4 Seafood

5 Vegetarian

6

7

8

9

0

Sandwich

1 Biscuit E.B.C.

2 B. fast Croissant

3 Croissant Sand

4 English Mu san

5 Biscuit S.E.C.

6

7

8

9

0

Sandwich

Breakfast

1 Biscuit E.B.C.

2 B. fast Croissant

3 Croissant Sand

4 English Mu san

5 Biscuit S.E.C.

6

7

8

9

0

Sandwich

Breakfast

Enter

Menu Categories

Food Category

Menu Item

Food Category Menu Item

Menu Item

9

General User Instructions

MAIN COOKING MENU

After the oven has preheated, the menu appears. The AXP high speed

oven comes preprogrammed with several menu items to simplify

cooking.

Examples of Preprogrammed Menu Items Include:

Cooking with Preprogrammed Pads

To cook food using preprogrammed menu items

1. After oven has preheated to the

desired temperature, scroll or

press number to choose desired

food category from menu.

2. Choose menu item group

and press Enter to select.

3. Highlight item you wish to cook.

Note: If there is a line though the menu

item, then preheat temperature is

different than menu item preset

temperature. The control will not allow

you to select that item.

4. Open oven door, place

food in oven and close door.

5. Press Enter to start cooking

process.

6. At end of cooking cycle, oven

beeps and displays animation

at right:

1

2

3

1

3

2

4

6

5

7 8

0

9

abc def

jklghi

. ’ - #

mno

tuvpqrs wxyz

& /

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

1. Sandwich

- Breakfast

- Poultry

- Meat

- Seafood

- Vegetarian

3. Vegetarian

- Breakfast

- Lunch

- Vegetables

- Appetizers

- Potatoes

5. Pasta-Pizza

- Small/Large Pizza

- Pasta

- Miscellaneous

2. Meat

- Poultry

- Beef

- Pork

- Appetizers

- Breakfast

4. Seafood

- Fish

- Shellsh

- Misc

6. Bakery-Desserts

- Bread

- Desserts

- Snacks

- Breakfast

- Sweet

Enter

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

1 Biscuit E.B.C.

2 B. fast Croissant

3 Croissant Sand

4 English Mu san

5 Biscuit S.E.C.

6

7

8

9

0

Sandwich

Breakfast

Back

1 Breakfast

2 Poultry

3 Meat

4 Seafood

5 Vegetarian

6

7

8

9

0

Sandwich

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

Note: Menu Items may vary by model.

10

Manual Cooking

Using MANUAL COOK (Option 4 has to be set to allow manual cooking see page 18)

Use Manual cooking when a specic entered time and cooking power levels are desired. It’s very useful when you are

experimenting with new food items. Maximum cook time is 100 minutes. Microwave, Fan and IR can be set to 11 different

power levels between 0-100% with 10% increments.

1. After oven has preheated to desired

temperature (200-520°F / 95-270°C), press

Manual Cook keypad.

2. Use Scroll Up and Scroll Down keypad

to move between cooking elements and time

3. For Stage 1, enter cooking time using the

number pads (up to 100 minutes). Press Scroll

Down keypad to move to the following cooking

element.

4. Enter desired microwave power (press 0 (for

0%), 1 (10%), press 5 (50%)… and press

1 twice for full power (100%). Press Scroll

Down keypad to move to the following cooking

element

5. Input desired fan speed using number keypad.

6. Enter desired Infrared (IR) power (press 0 (for

0%), 1 (10%), press 5 (50%)… and press 1

twice for full power (100%).

7. Repeat steps 2-6 for each cooking stage, if

more than one cooking stage is necessary.

8. Place food in oven.

9. Press Start keypad to begin cooking.

The display counts down. The food

category is displayed and the word Manual is

in the display.

How to Save A Manual Cook

Program to the Menu

If you’re satised with the cooking results

achieved from manual cooking you can

save the manual cook item.

1. To save, press Enter

keypad.

Note: Option 5 must be set to save

after manual cook. (See page 18)

2. Highlight Menu Category by using Scroll Up or

Scroll Down keypad or create new Menu Category

name. Press Enter keypad.

3. Highlight food category by using Scroll Up and

Scroll Down keypad to select open menu location.

4. In the Menu Item screen, highlight the location where

you wish to add the new name.

5. When new location is highlighted Press Program

keypad.

6. Use Number

KEYPAD

keypads to enter item name. Use

Back

keypad to delete any mistakes. This step

needs to be repeated for each menu level. See user

option 2 for text case options page 18.

7. Press Enter keypad when nished.

8. To exit Manual Cook mode, press Back keypad

repeatedly to take you to the Main Menu screen.

10. At end of cooking cycle, oven beeps and displays

animation below:

Note: To interrupt cooking cycle,

open door. To resume cooking,

close door and press start.

11. Remove food from oven.

1 Biscuit E.B.C.

2 B. fast Croissant

3 Croissant Sand

4 English Mu san

5 Biscuit S.E.C.

6 Bagel & Cheese

7

8

9

0

Sandwich

Breakfast

Bagel & Cheese

Sandwich

Breakfast

1 Biscuit E.B.C.

2 B. fast Croissant

3 Croissant Sand

4 English Mu san

5 Biscuit S.E.C.

6

7

8

9

0

Breakfast

11

1. Press the Program

keypad.

2. Highlight Edit with Scroll Up or Scroll Down

keypad.

3. Press the Enter keypad

4. Use the Scroll Up or Scroll Down keypad to

highlight Menu Category and/or Food Category where

menu item to edit is saved. Press Enter keypad.

5. At the Menu item screen, use Scroll Up or Scroll

Down keypad to highlight the desired item to edit.

PROGRAM Add a new menu item

ENTER

To save or go to next screen

BACK

Go to previous screen

SCROLL UP

or SCROLL DOWN

EDIT Change an existing menu item

DELETE

Delete an existing menu item

ACCESSING THE PROGRAM MENU

1. To access the PROGRAM mode, press

the Program

keypad.

2. Then select Edit

with Scroll Up or

Scroll Down

from the screen.

3. Press Enter

then select the food

category, food item to be programed using the

Scroll Up

or Scroll Down keypad.

Oven Programming

PROGRAM MENU OVERVIEW

EDITING OR ADDING MENU PROGRAM

SETTINGS

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

6. Press the Enter keypad and cook settings will

appear.

7. Use Scroll Up or Scroll Down keypad to

Select Temperature, Time, Microwave %, Fan% and

IR% setting. Use number keypads to enter the time,

temperature or cooking powers. For MW, Fan or IR,

press 0 for 0%, 1 for 10%..... 9 for 90% or 1 twice for

100%.

8. When cook settings are complete press Enter

keypad.

9. Press Back keypad repeatedly to exit program mode.

1 Breakfast

2 Poultry

3 Meat

4 Seafood

5 Vegetarian

6

7

8

9

0

Sandwich

1 Biscuit E.B.C.

2 B. fast Croissant

3 Croissant Sand

4 English Mu san

5 Biscuit S.E.C.

6

7

8

9

0

Sandwich

Breakfast

Cook Time

Oven Temperature

IR

Fan

Microwave Power

12

1. Press the Program keypad.

2. Highlight Edit

with Scroll Up or Scroll Down

keypad and press Enter

keypad.

3. Using the Scroll Up

or Scroll Down keypad to

highlight location where new category or item will be placed.

(In order to navigate to the following screen, Scroll Up

and Scroll Down

keypad to highlight desired menu and

press Enter

keypad). For example:

I. Editing Name in Menu Category Screen

A. Highlight Item B. go to Step 4

II. Editing Name in Food Category

EDITING OR ADDING NEW NAMES FOR

MENU CATEGORY OR FOOD CATEGORY

OR MENU ITEM

Oven Programming

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

A. Highlight desired Menu Category

B. Press Enter

C. Highlight desired Food Category

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

III. Editing / Adding Name in Menu Item

In order to add program settings, you must name your item

rst.

4. Press the Program

keypad.

1 Breakfast

2 Poultry

3 Meat

4 Seafood

5 Vegetarian

6

7

8

9

0

Sandwich

D. Go to Step 4

A. Highlight desired Menu Category

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

B. Press Enter

C. Highlight desired Food Category

1 Breakfast

2 Poultry

3 Meat

4 Seafood

5 Vegetarian

6

7

8

9

0

Sandwich

D. Press Enter

E. Highlight desired Menu Item

1 Biscuit E.B.C.

2 B. fast Croissant

3 Croissant Sand

4 English Mu san

5 Biscuit S.E.C.

6

7

8

9

0

Sandwich

Breakfast

F. Go to Step 4

13

Oven Programming

1. Press the Program keypad.

2. Highlight Delete with Scroll Up or Scroll Down

keypad.

3. Press the Enter

keypad.

4. Using the Scroll Up

or Scroll Down keypad to

highlight Menu Category and/or Food Category and/or Menu

Item where the single menu item to delete is saved. Press

Program

keypad after highlighting the desired menu

item.

5. Press the Enter keypad to Conrm the deletion of the

menu item..

6. Name and program are deleted.

7. Press Back

keypad repeatedly to exit program mode.

DELETING A SINGLE MENU ITEM

.

_ , & , / , 0

5. Enter name for category or item using keypad digits for

letters, numbers and symbols. [For example: Press Keypad

“2” three times for letter “c”]

When the correct letter is displayed, wait until cursor moves to

the next space. If a correction is necessary, press back

to erase one character at a time.See user option 2 for text

case options (page 18).

6. Press the Enter

keypad to save name and it will take

you to the next screen. If you are adding or editing a menu

item (last screen), after pressing enter will take you to the

program setting screen.

7. Press Back

keypad repeatedly to exit program mode.

1 Biscuit E.B.C._

Breakfast

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

X X X

1 Breakfast

2 Poultry

3 Meat

4 Seafood

5 Vegetarian

6

7

8

9

0

Sandwich

X X X

1 Biscuit E.B.C.

2 B. fast Croissant

3 Croissant Sand

4 English Mu san

5 Biscuit S.E.C.

6

7

8

9

0

Breakfast

X X X

Breakfast

Biscuit E.B.C.

Sandwich

14

DELETING A WHOLE MENU CATEGORY

OR FOOD CATEGORY

Deleting a whole menu category or food category will

delete all the menu items underneath that group (up

to 100 menus for any of the menu category and 10

menu items for the food category).

1. Press the Program keypad.

2. Highlight Delete

with Scroll Up or Scroll Down

keypad.

3. Press the Enter

keypad.

4. Using the Scroll Up

or Scroll Down keypad to

highlight Menu Category and/or Food Category to delete.

Press Program

keypad after selecting menu or food

category to delete.

5. Press the Enter keypad again to conrm the deletion of

the menu item.

6. Menu name and all programs in that category are deleted.

7. Press Back

keypad repeatedly to exit program mode.

Oven Programming

1 Sandwich

2 Meat

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

X X X

Meat

1 Sandwich

2

3 Vegetarian

4 Seafood

5 Pasta-Pizza

6 Bake-Dess

7

8

9

0

15

Microwave Only Feature

USING OVEN AS A MICROWAVE OVEN

This option is only available if the oven cavity temperature is

less than 200°F.

To access the MICROWAVE ONLY button, user option #15

(page 18) must be set to allow microwave only mode. The oven

default does not have the MICROWAVE ONLY feature activated.

When user option MICROWAVE ONLY is on, the MICROWAVE

ONLY icon appears in the bottom right corner of the display.

To cook a preprogrammed microwave only item follow these

steps:

1.Press the Enter

keypad.

2. Use Scroll Up

and Scroll Down keypad to select

desired item from the program menu or press the item number

pad.

3. Place food in oven.

4. Press start

keypad to begin cooking.

5. At end of cooking cycle, oven beeps and displays animation

below:

6. Remove food from oven.

ADDING MICROWAVE ONLY MENU ITEMS

1. Press the Enter keypad.

2. Press the Program keypad.

3. Press the Enter keypad.

4. Use Scroll Up

and Scroll Down keypad to select

location for new item.

5. Press the Program

keypad.

6. Enter name for category or item using keypad digits for

letters, numbers and symbols. [For example: Press Keypad

“2” three times for letter “c”]

When the correct letter is displayed, wait until cursor moves to

the next space. If a correction is necessary, press back

to erase one character at a time.

Microwave cooking uses high frequency

energy waves to heat food. When cooking,

microwave energy causes food molecules

to move rapidly. This rapid movement

between the food molecules creates heat,

which cooks the food.

MICROWAVE COOKING

WHAT IS STAGE COOKING?

Stage cooking enables several different

cooking cycles, or stages, to be used

consecutively without repeated input from

the user. Stage cooking can be set to

defrost food initially, then cook it, and then

keep the food warm until serving time. The

total cooking time for all combined stages

cannot exceed 100 minutes.

Microwave Only Icon

.

_ , & , / , 0

7. Press the Enter keypad to save name.

8. Enter Time using number keypads.

9. Use Scroll Down keypad to select microwave

percentage.

10. Enter microwave percentage using number keypads.

11. Use Scroll Down

keypad to select stage 2-4 if more

than one cooking stage is necessary.

12. Repeat steps 6-8 if more than one cooking stage is

required.

13. Press Enter

to save item.

14. Press Back keypad to exit program mode.

16

AXP Care and Cleaning

AXP/MXP Care and Cleaning

Daily Cleaning Recommendations: Follow the recommendations below for proper maintenance of the AXP/MXP oven.

Please note: The use of caustic cleaning products or those containing ammonia, phosphates, chlorine, sodium or potassium

hydroxide (lye) can damage critical oven parts. Do not use water pressure type cleaning systems. Use of unapproved cleaning

agents will void the terms of the warranty.

Recommended Cleaning Supplies: damp towel, plastic scouring pad, ACP Oven Cleaner (Item CL10) and ACP Oven Shield

Oven Protectant (Item SH10).

Wear protective gloves and protective glasses when cleaning the oven.

To prevent burns, handle utensils, accessories, and door with care.

Allow oven, utensils, and accessories to cool before cleaning.

Oven, utensils, and accessories become hot during operation.

WARNING

I. For a new oven, before using it the first time:

When oven is clean, spray damp towel with ACP Oven Shield (SH10) and wipe all interior surfaces. Do not remove Oven

shield. Turn oven on and pre-heat to start cooking.

II. DAILY CLEANING

1A.

If oven is hot: Shut oven

off by pressing ON / OFF

button and open door. Fan will

continue running until oven

has cooled. Cooling takes 15-

20 minutes.

1B. If oven is cold: For

optimum results heat oven to

a maximum temp of 200°F

(94°C), turn oven OFF, wait

until fan stops.

2. Remove rack, pizza

stone, and other

accessories from the cavity

when it’s cooled

3. Lift Bottom Element

If element is warm, use

insulated gloves, oven mitt or

tongs to lift the element.

Remove baked on particles

using a scraper.

4. Spray Oven Interior

Wear rubber gloves and

safety glasses. Spray

oven door, sides and

floor with ACP Oven

Cleaner (CL10). Avoid spraying

into perforations. Allow

cleaner to soak for 2 minutes.

5. Clean Oven Interior

5A. Clean the oven door and

interior using a plastic scouring

pad on metal portions of oven.

White ceramic covers on the both

sides of the oven turn to a yellow

tan color after usage. Gently

clean the ceramic covers and red

sealant, apply only gentle

pressure while cleaning. If

needed, repeat steps 4 and 5.

5B. Clean perforated area with

damp towel sprayed with cleaner.

6. Wipe Oven Interior

Using a damp clean towel, wipe

the oven interior, rinse towel and

wring dry, repeat 2-3 times to

remove remaining oven cleaner

and particles from the oven.

7. Spray Oven Shield

When oven is clean, spray a thin

layer of ACP Oven Shield (CL10) on all

interior surfaces. Place rack back

in oven.

Do not remove Oven Shield.

8. Clean Oven Exterior

Clean exterior door and other

surfaces with a clean cloth,

sponge or nylon pad using a mild

detergent and warm water

solution.

17

III. WEEKLY CLEANING

1. Clean Air Filter

Remove the air filters located on each

side of the oven at the base.

Wash filter in a mild detergent solution

made with warm water.

Rinse and dry thoroughly.

Replace filters by sliding back into the

side locations.

DO:

Clean oven daily

Use non-caustic cleaner

Remove food from oven at end of cycle

Use only accessories that are both high temperature oven-safe and microwave-safe.

Wash rack with warm, soapy water and air dry.

Clean pizza stone by using a plastic

scraper to remove baked on particles.

DO NOT:

DO NOT use caustic cleaning products or those containing ammonia, phosphates, chlorine,

sodium or potassium hydroxide (lye)

DO NOT use a water-pressure type cleaning system

DO NOT cook foods with plastic wrap on them

DO NOT use abrasive scouring pads to clean ceramic side covers and the red sealant

surrounding each cover.

DO NOT wash or immerse pizza stone

DO NOT operate oven without a load (empty) in microwave mode.

Any chemical questions please refer to Chemco's MSDS' for ACP Oven Cleaner and ACP

Oven Shield Protectant or contact ACP, Inc. ComServ Customer Service.

email: [email protected]

AXP Care and Cleaning

18

User Options

There are several options you can change to customize the operation of the oven for your business. The table below shows

these options; the factory setting is shown in bold type.

1. Oven must be off. To turn oven off, press ON/OFF

keypad.

2. Press and hold “2” keypad until option screen appears.

3. Choose option by pressing Enter

keypad then use Scroll Up and Scroll Down keypad to select option to highlight

desired option.

4. Press Start

keypad to save and press Stop / Reset to exit options mode.

5. Option 6, if “Password Needed” is highlighted press Program keypad to view or edit password.

CLEAN FILTER

When this message displays, clean the

air lter thoroughly. Cleaning the air

lter will not shut off the message.

The message will automatically stop

displaying after 24 hours.

Depending on microwave use and

environmental conditions, the lter

may need to be cleaned more or

less frequently. Once the frequency

is determined, set the option for the

appropriate time frame.

Air lter and vents must be cleaned

regularly to prevent overheating of the

oven. Refer to Owner’s Manual for

complete cleaning instructions.

Air Filters

On Sides

CLEAN

FILTERS

Note: Refer to page 3 for Data Transfer

instructions (Option 17)

Options# Setting Name Options

01 Digit Entry Single digit entry

Double digit entry

02 Text Case Caps

Lower case

Mixed

03 Menu Setting 01=10 Items

02 =100 Items

03 = 360 items

04 (Manual) Cook Manual cooking allowed

Manual cooking not allowed

05

(Manual) Save

Save after manual cook

Do not save after manual cook

06 Program Password Password needed

Changes to programs allowed

07 Door Reset Opening door resets timer

Opening door pauses cook cycle

08 Keyboard Activation Off

30 Seconds

60 Seconds

120 Seconds

09

Keybeep

On

Off

10 Keybeep Volume Low

Medium

High

11 End Of Cycle Beep Three beeps once

Three beeps repeating

Continuous until door is opened

12 Preheat Warning Warn if oven not at temp

Off

13 Temperature Scale Temperatures are displayed in °F for 60Hz

models

Temperatures are displayed in °C for 50Hz

models

14 Clean Filter Reminder Off

Displays every 7 days

Displays every 30 days

Displays every 90 days

15 (Microwave) Only Allow microwave only mode

No microwave only mode

16 Auto Off Disable

2 Hours

4 Hours

8 Hours

17 Data Transfer Begin Transfer: Card to Oven

Begin Transfer: Oven to Card

19

To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time.

Only an authorized servicer should remove outer case.

This is a Class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Problem

Possible Cause

Oven does not operate

Confirm oven is plugged in.

Confirm oven is connected to a grounded circuit.

Check fuse or breaker.

Oven operates intermittently

Check air filters and discharge air vents

If oven does not accept entries

when pad is pressed

Make sure oven is preheated. Open and close

door, press pad again.

Oven fan turns on while oven

is not preheating or cooking

Normal operation

When I turn the oven OFF, the

display is still lit.

Normal operation

Clean Filter displays

This is normal and will appear for 24 hours.

Frozen oven display Oven display needs to reset.

Unplug oven. Wait 5 seconds. Plug back in.

Before Calling for Service



2011 ACP, Inc.

Part No. 20001305

Revised 7/11

For full product documentation visit:

www.acpsolutions.com

Conserve estas instrucciones como

material de referencia. Si el equipo

cambiara de dueño, cerciórese de que

vaya acompañado del manual. Consulte

importante información de seguridad

en la sección INSTRUCCIONES DE

SEGURIDAD antes de usar este horno.

Manual del Propietario

HORNO COMBINADO COMERCIAL DE ALTA VELOCIDAD

La page charge ...

Amana XPRESS AXP22 Le manuel du propriétaire

Amana XPRESS AXP22 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents