ASD STANDARD SERIES Manuel utilisateur

Taper
Manuel utilisateur
LED Full Cutoff Wallpack
Standard Series
Phone: 781-739-3977
WebSite: www.asd-lighting.com Fax: 339-502-8970
ASD Full-cuto wallpacks oer controlled light output for general-purpose area and security lighting. Dark-sky compliant.
Ideal replacement for up to 250-watt HID xtures.
Die-cast aluminum housing with dark bronze nish. Mounts to junction box or directly to wall. Full-cuto LED wall pack is a
perfect replacement for traditional outdoor wall packs.
Replaces up to 250 Watt Metal Halide
Fixture is full cuto version (no uplight)
Impact-resistant polycarbonate optical lens
No maintenance
Operating temperature of -40℉ to 104℉
Wet location IP65
L-70 Life > 75,000 hrs
cULus certied
DesignLights Consortium (DLC) listed
(Classication: Standard)
5 Year warranty
FEATURES AND BENEFITS:
ORDERING MATRIX:
Family Modication Watts Dimmable 0~10 V / N CCT
ASD-WLP 03 XX X 50
LED Full Cutо Wallpack 50 = 50 W N = Non-dimmable 5,000 K
80 = 80 W D = Dimmable
110
lm
HIGH LUMINOUS
EFFICIENCY
w
LED FULL CUTOFF WALLPACK:
Model Watts Dimming Compatible CCT Lumens Dimensions (LxWxH)
ASD-WLP03-50N50 50 No 5,000 K 5,798 lm 14"x 9 1/4"x 8 1/4"
ASD-WLP03-80D50 80 Yes 5,000 K 9,128 lm 14"x 9 1/4"x 8 1/4"
LED Full Cutoff Wallpack
Standard Series
Phone: 781-739-3977
WebSite: www.asd-lighting.com Fax: 339-502-8970
PRODUCT SPECIFICATIONS:
Construction & Materials
Lens PC
Reector Aluminum
Housing Aluminum
Finish Bronze
Weight ASD-WLP03-50N50 5.46 lb (2.48 kg) ASD-WLP03-80D50 6.16 lb (2.8 kg)
Optical System
Luminous Flux ASD-WLP03-50N50 5,798 lm ASD-WLP03-80D50 9,128 lm
Color Temperature 5,000 K
CRI >80
Environmental System
Work Environment Suitable for Wet Locations, IP65
Operating Temperature -40℉ to 104℉ (-40℃ to 40℃)
L-70 Life > 75,000 hrs
Electrical System
Input Voltage 100~277V AC 50/60 Hz
Max input current ASD-WLP03-50N50 0.52 A ASD-WLP03-80D50 1.5 A
O State Power 0 W
Power Consumption ASD-WLP03-50N50 50 W ASD-WLP03-80D50 80 W
Power Factor ≥ 0.9
Output voltage ASD-WLP03-50N50 23-42 V ASD-WLP03-80D50 40 V
Max output current ASD-WLP03-50N50 1200 mA ASD-WLP03-80D50 2.1 A - 3 A
Warranty & Certications
5-year limited warranty
DesignLights™ Consortium (DLC) listed
cULus certied E473804
LED Full Cutoff Wallpack
Standard Series
Phone: 781-739-3977
WebSite: www.asd-lighting.com Fax: 339-502-8970
FULL CUTOFF WALLPACK ORDERING INFORMATION:
Model Watts CCT UPC Product
Code
Pcs in one
Carton
Carton Size Carton Weight
ASD-WLP03-50N50 50 5,000 K 857622006831 026.0118 1 15.55"x8.66"x9.64" 6.16 lbs
ASD-WLP03-80D50 80 5,000 K 857622006848 026.0119 1 15.55"x8.66"x9.64" 6.82 lbs
9.3” (235 mm)
14.3” (363.5 mm) 8.3” (210.2 mm)
50 W, 80 W
ASD-WLP03-50N50 ASD-WLP03-80D50
LIGHT DISTRIBUTION CURVE UNIT:CD
C0 PLANE ISOLUX DIAGRAM (UNIT:lx)
0m
1m
1m
2m
2m
3m
MH(m)
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
2992
2393
1795
1196
598
-180 -120 -60 0 60 120 180
0
598
1196
1795
2393
2992
C0-C180 C90-C270
Mounting Height: 10.0m Max Lux(100%): 17.1 lx
( 1%): 0.2 lx ( 2%): 0.3 lx
( 5%): 0.9 lx ( 10%): 1.7 lx
( 20%): 3.4 lx ( 50%): 8.5 lx
(100%): 17.1 lx
LIGHT DISTRIBUTION CURVE UNIT:CD
C0 PLANE ISOLUX DIAGRAM (UNIT:lx)
0m
1m
1m
2m
2m
3m
MH(m)
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
4637
3709
2782
1854
927
-180 -120 -60 0 60 120 180
0
927
1854
2782
3709
4637
C0-C180 C90-C270
Mounting Height: 10.0m Max Lux(100%): 25.2 lx
( 1%): 0.3 lx ( 2%): 0.5 lx
( 5%): 1.3 lx ( 10%): 2.5 lx
( 20%): 5.0 lx ( 50%): 12.6 lx
(100%): 25.2 lx
LED Full Cutoff Wallpack
Standard Series
Phone: 781-739-3977
WebSite: www.asd-lighting.com Fax: 339-502-8970
WARNING
RISK OF PERSONAL INJURY – READ and follow all WARNINGS and installation instructions.
Keep or give to the owner for future reference.
Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this
product.
Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with
the construction and operation of the product and the hazards involved.
Risk of Fire: Minimum 90°С supply conductors. Consult a qualied electrician to ensure correct branch circuit conductor.
ASD® assumes no responsibility for claims arising out of improper or careless Installation or handling of this product.
AVERTISSEMENT
RISQUE DE BLESSURES - Lisez et suivez toutes les MISES EN GARDE et les instructions d’installation.
Tenir ou fournir au propriétaire pour référence future.
Risque de coupures: Porter des gants pour éviter les coupures ou des écorchures lors du retrait du carton, de la manutention,
l’installation et le maintien de ce produit.
Risque de choc électrique: Ce produit doit être Installé conformément au code d’installation applicable par une personne
familiarisée avec la construction et l’exploitation du produit et les risques impliqués.
Risque d’incendie: minimum 90° С Alimentation conducteurs. Consultez un électricien qualié pour assurer le bon conducteur de
circuit de dérivation.
ASD® n’assume aucune responsabilité pour les réclamations découlant d’une installation inadéquate ou négligente ou de la
manipulation de ce produit.
ADVERTENCIA
RIESGO DE LESIONES PERSONALES – Lea y siga todas las advertencias e instrucciones de instalación.
Mantener о proporcionar al propletario para referencia futura.
Riesgo de cortes: Use guantes para evitar cortes о abrasiones en la eliminación de la caja, manejo, instalación y mantenimlento de
este producto.
Riesgo de choque eléctrico. Este pfoducto debe ser instalado de acuerdo con el código de Instalación uplicable en que una persona
familliarizada con la construcciôn y operación del producto y los riesgos Involucrados.
Riesgo de Incendio: Minimo 90° С los conductores de suministro. Consuite a un etectricista calicado para asegurarse el conductor
correcto del circuito.
ASD® no asume ninguna responsabilidad por reclamaciones derivadas de uno instaiación inadecuada о neggente о la manipuloción
de este producto.
LED Full Cutoff Wallpack
Standard Series
Phone: 781-739-3977
WebSite: www.asd-lighting.com Fax: 339-502-8970
INSTALLATION GUIDE
IMPORTANT SAFETY INFORMATION:
Please read all the instructions below before installation.
Make sure that the supply voltage corresponds to the rated product voltage.
The product must be installed by a qualied electrician in accordance with the National Electrical Code and corresponding
local codes.
If the product is damaged, do not use it.
All wiring connections should be capped with UL approved wire connectors.
This xture is intended to be connected to a properly installed and grounded UL listed junction box with suitable strain relief
means for power cord. The junction box is not included, should be purchased separately.
INSTALLATION STEPS
1. Use a screwdriver to loosen (2) screws securing xture door
and open it.
2. Mounts to junction box or directly to wall.
2.1 Take care to avoid damaging driver, wires and quick
connectors and drill holes through castings over xture.
Hang the xture on the back plate. Connect wires into
wiring terminal; white wire to “Neutral”terminal, black wire
to “Live” terminal, green wire to “Ground” terminal; and x
them by screws connect the ground wire to the back plate.
2.2 Replace one of the side caps, insert power cord into xture
and connect the wires as shown on picture 2.2. Refer to size
of the diagram to bore the holes on the wall.
3. Close xture and tighten the 2 screws removed in installation
step 1.
CONNECTION DIAGRAM DIMMABLE CONNECTION DIAGRAM NON-DIMMABLE
DRIVER
L
N
G
L
N
G
L (live/hot)
connect black
Ground
connect green
N (neutral)
connect white
Power connector
120~277V 50/60 Hz
Dim + (Violet)
Dim - (Gray)
FIXTURE
DRIVER
L
N
G
L
N
G
L (live/hot)
connect black
Ground
connect green
N (neutral)
connect white
P
ower connector
120~277V 50/60 Hz
FIXTURE
1.
2.1
2.2
3.
5.7” (145.5 mm)
6.5” (167.5 mm)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

ASD STANDARD SERIES Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues