Tascam Model 16 Le manuel du propriétaire

Catégorie
Mélangeurs audio
Taper
Le manuel du propriétaire

Ce manuel convient également à

ENGLISH
FRANÇAIS
ESPAÑOL
OWNER'S MANUAL
MODE D’EMPLOI
MANUAL DEL USUARIO
042862302
Model 24
Multitrack Live Recording Console
2
TASCAM Model 24
• TASCAMisaregisteredtrademarkofTEACCorporation.
• SDXCLogoisatrademarkofSD-3C,LLC.
• TheBluetooth®wordmarkandlogoarethepropertyof
BluetoothSIG,Inc.andareusedbyTEACCorporationwith
permission.
• Microsoft,WindowsandWindowsVistaareeitherregistered
trademarksortrademarksofMicrosoftCorporationinthe
UnitedStatesand/orothercountries.
• Apple,Mac,MacOS,macOS,iPad,iPodtouch,Lightning,App
StoreandiTunesaretrademarksofAppleInc.intheUnited
Statesandothercountries.
• ASIOisatrademarkofSteinbergMediaTechnologiesGmbH.
• Othercompanynames,productnamesandlogosinthis
documentarethetrademarksorregisteredtrademarksof
theirrespectiveowners.
Information is given about products in this manual only
for the purpose of example and does not indicate any
guarantees against infringements of third-party intel-
lectual property rights and other rights related to them.
TEAC Corporation will bear no responsibility for infringe-
ments on third-party intellectual property rights or their
occurrence because of the use of these products.
With the exception of personal enjoyment and similar
uses, copyrighted materials belonging to third parties
cannot be used without permission from the rights
holders in accordance with copyright law. Please use the
equipment appropriately.
TEAC Corporation will bear no responsibility for rights
infringements committed by users of this product.
TASCAM Model 24
3
E
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the
user to the presence of uninsulated dangerous voltage” within the products enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
For U.S.A.
Declaration of Conformity
Model Number: Model 24
Trade Name: TASCAM
Responsible party: TEAC AMERICA, INC.
Address: 10410 Pioneer Blvd. Suite #1, Santa Fe Springs,
California 90670, U.S.A.
Telephone number: 1-323-726-0303
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
INFORMATION TO THE USER
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and
receiver.
c) Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
d) Consult the dealer or an experienced radio/TV technician for
help.
CAUTION
Changes or modifications to this equipment not expressly
approved by TEAC CORPORATION for compliance could void
the users authority to operate this equipment.
IN USA/CANADA, USE ONLY ON 120 V SUPPLY.
For Canada
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.
CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A
LA NORME NMB-003 DU CANADA.
This product complies with the European
Directives request and the other Commission
Regulations.
IMPORTANT SAFETY INSTRUCTIONS
4
TASCAM Model 24
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
isrequired when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
• The apparatus draws nominal non-operating power from the
AC outlet with its POWER or STANDBY/ON switch not in the
ON position.
• The mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
• Caution should be taken when using earphones or
headphones with the product because excessive sound
pressure (volume) from earphones or headphones can cause
hearing loss.
• If you are experiencing problems with this product, contact
TEAC for a service referral. Do not use the product until it has
been repaired.
CAUTION
• Do not expose this apparatus to drips or splashes.
• Do not place any objects filled with liquids, such as vases,
on the apparatus.
• Do not install this apparatus in a confined space such as a
book case or similar unit.
• The apparatus should be located close enough to the AC
outlet so that you can easily grasp the power cord plug at
any time.
• If the product uses batteries (including a battery pack
or installed batteries), they should not be exposed to
sunshine, fire or excessive heat.
• CAUTION for products that use replaceable lithium
batteries: there is danger of explosion if a battery is
replaced with an incorrect type of battery. Replace only
with the same or equivalent type.
WARNING
• Products with Class ! construction are equipped with a
power supply cord that has a grounding plug. The cord of
such a product must be plugged into an AC outlet that has
a protective grounding connection.
WARNING
• To prevent possible hearing damage, do not listen
at high volume levels for long periods.
IMPORTANT SAFETY INSTRUCTIONS
TASCAM Model 24
5
E
IMPORTANT SAFETY INSTRUCTIONS
For European Customers
Disposal of electrical and electronic equipment and
batteries and/or accumulators
(a) All electrical/electronic equipment and waste batteries/
accumulators should be disposed of separately from the
municipal waste stream via collection facilities designated
by the government or local authorities.
(b) By disposing of electrical/electronic equipment and waste
batteries/accumulators correctly, you will help save valuable
resources and prevent any potential negative effects on
human health and the environment.
(c) Improper disposal of waste electrical/electronic equipment
and batteries/accumulators can have serious effects on the
environment and human health because of the presence of
hazardous substances in the equipment.
(d) The Waste Electrical and Electronic Equipment
(WEEE) symbols, which show wheeled bins that have
been crossed out, indicate that electrical/electronic
equipment and batteries/accumulators must be collected
and disposed of separately from household waste.
If a battery or accumulator contains more than the
specified values of lead (Pb), mercury (Hg), and/or
cadmium (Cd) as defined in the Battery Directive
(2006/66/EC, 2013/56/EU), then the chemical
symbols for those elements will be indicated beneath the
WEEE symbol.
(e) Return and collection systems are available to end users.
For more detailed information about the disposal of old
electrical/electronic equipment and waste batteries/
accumulators, please contact your city office, waste disposal
service or the shop where you purchased the equipment.
Pb, Hg, Cd
For China
“仅适用于海拔2000m以下地区安全使用”
“仅适用于非熱帯气候条件下安全使用”
“環境保護使用年限”
产品有毒有害物质或元素的名称及含量
机种: Model 24 有毒有害物质或元素
品名
(Pb)
(Hg)
(Cd)
六价铬
(Cr6+)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
1 CHASSIS部份
2 FRONT PANEL部份
3 螺丝部份
4 线材部份
5 PCB Assy部份 ×
6 电源部份
7 附属品部份 ×
8 LABEL部份
9 包装部份
○:表示该有毒有害物质在该部件所有均质材料中的含有量均在 GB/T26572 标准规定的限量要求以下。
×:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572标准规定的限量要求。
(针对现在代替技术困难的电子部品及合金中的铅)
6
TASCAM Model 24
Wireless equipment precautions
Compliance of radio transmitter and in-
terference
This product has the function of broadband transmitter using
2.4GHz Band.
Use frequency range: 2400 MHz – 2480 MHz
Maximum output power: Bluetooth® Class 2 (less than 2.5 mW)
Please use only in the country where you purchased the
product. Depending on the country, restrictions on the use of
Bluetooth wireless technology might exist.
Model for USA
Declaration of Conformity
Responsible party: TEAC AMERICA, INC.
Address: 10410 Pioneer Blvd. Suite #1, Santa Fe
Springs, California 90670, U.S.A.
Telephone number: 1-323-726-0303
This device complies with Part.15 of FCC Rules. Operation is
subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Labeling of authorization
FCC ID: XEG-MODEL24
Model for Canada
Compliance of radio transmitter
This device complies with Industry Canada’s licence-exempt
RSSs.
Operation is subject to the following two conditions:
1) This device may not cause interference
2) This device must accept any interference, including inter-
ference that may cause undesired operation of the device.
Labeling of authorization
IC: 1559C-MODEL24
Model for EEA (European Economic Area)
Hereby, TEAC Corporation declares that the
radio equipment type is in compliance with
Directive 2014/53/EU., and the other Directives,
and Commission Regulations.
The full text of the EU declaration of conformity is available at
the following internet address: Please contact us by e-mail.
https://www.tascam.eu/en/kontakt.html
EU Importer: TEAC Europe GmbH
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
Radiation Exposure requirements
This equipment meets the regulation, which is recognized
internationally, for the case of human exposure to radio waves
generated by the transmitter.
Statement of compliance
Model for USA
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment and meets the FCC radio
frequency Exposure Guidelines.
Model for Canada
This equipment complies with IC RSS-102 radiation exposure
limits set forth for an uncontrolled environment.
Model for USA/Canada
This Class B digital apparatus complies with Canadian ICES-003.
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and RSS-102
of the IC radio frequency (RF) Exposure rules. This equipment
has very low levels of RF energy that it deemed to comply
without maximum permissive exposure evaluation (MPE). But
it is desirable that it should be installed and operated keeping
the radiator at least 20 cm or more away from persons body
(excluding extremities: hands, wrists, feet and ankles).
Model for EEA (European Economic Area)
This equipment complies with EN.62311; Assessment of
electronic and electrical equipment related to human exposure
restrictions for electromagnetic fields; the harmonised standard
of DIRECTIVE 2014/53/EU.
TASCAM Model 24
7
F
Ce produit est conforme aux impératifs des
directives européennes et autres règlements de
la Commission.
ATTENTION: POUR RÉDUIRE LE RISQUE D'ÉLECTROCUTION, NE RETIREZ PAS LE CAPOT (OU
L'ARRIÈRE). AUCUNE PIÈCE INTERNE N'EST RÉPARABLE PAR L'UTILISATEUR. CONFIEZ TOUTE
RÉPARATION À UN SERVICE APRÈS-VENTE QUALIFIÉ.
Le symbole d'éclair à tête de flèche dans un triangle équilatéral sert à prévenir l'utilisateur de
la présence dans l'enceinte du produit d'une «tension dangereuse» non isolée d'une grandeur
suffisante pour constituer un risque d'électrocution pour les personnes.
Le point d'exclamation dans un triangle équilatéral sert à prévenir l'utilisateur de la présence
d'instructions importantes de fonctionnement et de maintenance (entretien) dans les
documents accompagnant l'appareil.
AVERTISSEMENT: POUR PRÉVENIR LES RISQUES
D'INCENDIE ET D'ÉLECTROCUTION, N'EXPOSEZ PAS CET
APPAREIL À LA PLUIE NI À L'HUMIDITÉ.
AUX USA/CANADA, UTILISEZ UNIQUEMENT UNE TENSION
D'ALIMENTATION DE 120V.
Pour le Canada
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À
LA NORME NMB-003 DU CANADA.
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES
8
TASCAM Model 24
1. Lisez ces instructions.
2. Conservez ces instructions.
3. Tenez compte de tous les avertissements.
4. Suivez toutes les instructions.
5. N'utilisez pas cet appareil avec de l'eau à proximité.
6. Nettoyez-le uniquement avec un chiffon sec.
7. Ne bloquez aucune ouverture de ventilation. Installez-le
conformément aux instructions du fabricant.
8. Ne l'installez pas près de sources de chaleur telles que
des radiateurs, bouches de chauffage, poêles ou autres
appareils (y compris des amplificateurs) dégageant de la
chaleur.
9. Ne neutralisez pas la fonction de sécurité de la fiche polarisée
ou de terre. Une fiche polarisée a deux broches, l'une plus
large que l'autre. Une fiche de terre a deux broches identiques
et une troisième broche pour la mise à la terre. La broche plus
large ou la troisième broche servent à votre sécurité. Si la fiche
fournie n'entre pas dans votre prise, consultez un électricien
pour le remplacement de la prise obsolète.
10. Évitez de marcher sur le cordon d'alimentation et de
le pincer, en particulier au niveau des fiches, des prises
secteur, et du point de sortie de l'appareil.
11. N'utilisez que des fixations/accessoires spécifiés par le
fabricant.
12. Utilisez-le uniquement avec le chariot, socle, trépied,
support ou table spécifié par le fabricant ou vendu avec
l'appareil. Si un chariot est utilisé, faites attention à ne pas
être blessé par un renversement lors du déplacement de
l'ensemble chariot/appareil.
13. Débranchez cet appareil en cas d'orage ou de non
utilisation prolongée.
14. Confiez toute réparation à des techniciens de maintenance
qualifiés. Une réparation est nécessaire si l'appareil a été
endommagé d'une quelconque façon, par exemple si le
cordon ou la fiche d'alimentation est endommagé, si du
liquide a été renversé sur l'appareil ou si des objets sont
tombés dedans, si l'appareil a été exposé à la pluie ou à
l'humidité, s'il ne fonctionne pas normalement, ou s'il est
tombé.
• Lappareil tire un courant nominal de veille de la prise secteur
quand son interrupteur POWER ou STANDBY/ON nest pas en
position ON.
• La fiche secteur est utilisée comme dispositif de déconnexion
et doit donc toujours rester accessible.
• Des précautions doivent être prises en cas d'utilisation
d'écouteurs ou d'un casque avec le produit car une pression
acoustique excessive (volume trop fort) dans les écouteurs
ou dans le casque peut causer une perte auditive.
• Si vous rencontrez des problèmes avec ce produit, contactez
TEAC pour une assistance technique. N'utilisez pas le produit
tant qu'il n'a pas été réparé.
ATTENTION
• N'exposez pas cet appareil aux gouttes ni aux
éclaboussures.
• Ne placez pas d'objet rempli de liquide sur l'appareil,
comme par exemple un vase.
• N’installez pas cet appareil dans un espace confiné comme
une bibliothèque ou un meuble similaire.
• Lappareil doit être placé suffisamment près de la prise de
courant pour que vous puissiez à tout moment attraper
facilement la fiche du cordon d'alimentation.
• Si le produit utilise des piles/batteries (y compris un pack
de batteries ou des batteries fixes), elles ne doivent pas être
exposées au soleil, au feu ou à une chaleur excessive.
• PRÉCAUTION pour les produits qui utilisent des batteries
remplaçables au lithium: remplacer une batterie par
un modèle incorrect entraîne un risque d'explosion.
Remplacez-les uniquement par un type identique ou
équivalent.
AVERTISSEMENT
• Les produits ayant une construction de Classe ! sont
équipés d'un cordon d'alimentation avec une fiche de terre.
Le cordon d'un tel produit doit être branché dans une prise
secteur avec terre de sécurité.
AVERTISSEMENT
• Pour éviter déventuels dommages auditifs,
nécoutez pas de façon prolongée à niveau sonore
élevé.
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES
TASCAM Model 24
9
F
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES
Pour les consommateurs européens
Mise au rebut des équipements électriques et
électroniques et des piles et/ou accumulateurs
(a) Tous les équipements électriques et électroniques et piles/
accumulateurs hors d'usage doivent être traités séparément
de la collecte municipale d'ordures ménagères dans des
points de collecte désignés par le gouvernement ou les
autorités locales.
(b) En vous débarrassant correctement des équipements
électriques/électroniques et piles/accumulateurs hors
d'usage, vous contribuerez à la sauvegarde de précieuses
ressources et à la prévention de potentiels effets négatifs sur
la santé humaine et l'environnement.
(c) Le traitement incorrect des équipements électriques/
électroniques et piles/accumulateurs hors d'usage
peut avoir des effets graves sur l'environnement et la
santé humaine en raison de la présence de substances
dangereuses dans les équipements.
(d) Le symbole de déchets d'équipements électriques
et électroniques (DEEE), qui représente une
poubelle à roulettes barrée d'une croix, indique
que les équipements électriques/électroniques et piles/
accumulateurs doivent être collectés et traités
séparément des déchets ménagers.
Si une pile ou un accumulateur contient plus que les
valeurs de plomb (Pb), mercure (Hg) et/ou cadmium
(Cd) telles que spécifiées dans la directive sur les
piles et accumulateurs (2006/66/EC, 2013/56/EU), alors les
symboles chimiques de ces éléments seront indiqués sous le
symbole DEEE.
(e) Des systèmes de retour et de collecte sont disponibles
pour l'utilisateur final. Pour des informations plus détaillées
sur la mise au rebut des vieux équipements électriques/
électroniques et piles/accumulateurs hors d'usage, veuillez
contacter votre mairie, le service d'ordures ménagères ou le
magasin dans lequel vous avez acquis l'équipement.
Pb, Hg, Cd
10
TASCAM Model 24
Précautions concernant les appareils sans fil
Conformité de l'émetteur radio et
interférences
Ce produit a une fonction d’émetteur large bande utilisant la
bande des 2,4GHz.
Plage de fréquences utilisée: 2400MHz – 2480MHz
Puissance maximale d’émission: Bluetooth® de classe2 (moins
de 2,5mW)
Veuillez n’utiliser cet appareil que dans le pays où il a été acheté.
Selon le pays, des restrictions d’usage de la technologie sans fil
Bluetooth peuvent exister.
Modèle pour le Canada
Conformité de l’émetteur radio
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence.
Lexploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Marquage d'autorisation
IC: 1559C-MODEL24
Conformité de brouillage
Marquage d'autorisation
CAN ICES-3(B)/NMB-3(B)
Modèle pour l'EEE
(Espace économique européen)
Par la présente, TEAC Corporation déclare que
ce type d’équipement radio est en conformité
avec la directive 2014/53/UE, et avec les autres
directives et règlements de la Commission.
Le texte intégral de la déclaration de conformité pour l'UE est
disponible à l'adresse internet suivante (veuillez nous contacter
par e-mail).
https://www.tascam.eu/en/kontakt.html
Importateur pour l'UE: TEAC EUROPE GmbH.
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Allemagne
Exigences relatives à l'exposition aux
rayonnements
Cet équipement satisfait la réglementation reconnue à l'échelle
internationale en matière d'exposition humaine aux ondes
radioélectriques générées par l'émetteur.
Déclaration de conformité
Modèle pour le Canada
Cet équipement est conforme aux limites d'exposition aux
radiofréquences établies pour un environnement non contrôlé
par le CNR-102 d'IC.
Modèle pour USA/Canada
Cet équipement est conforme aux limites d’exposition au
rayonnement fixées par la FCC/IC pour un environnement
non contrôlé, et répond aux directives d’exposition aux
radiofréquences (RF) de la FCC et aux règles CNR-102
d’exposition aux radiofréquences de l’IC. Cet équipement émet
une énergie RF très faible qui est considérée conforme sans
évaluation de l’exposition maximale autorisée. Cependant, cet
équipement doit être installé et utilisé en gardant une distance
de 20cm ou plus entre le dispositif rayonnant et le corps (à
l’exception des extrémités: mains, poignets, pieds et chevilles).
Modèle pour l'EEE (Espace économique européen)
Cet équipement est conforme à la norme EN.62311: Évaluation
des équipements électroniques et électriques en relation
avec les restrictions d'exposition humaine aux champs
électromagnétiques; la norme harmonisée de la Directive
2014/53/UE.
TASCAM Model 24
11
S
PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGAS ELÉCTRICAS, NO QUITE LA CARCASA (NI
LA TAPA TRASERA) DENTRO DE LA UNIDAD NO HAY PIEZAS QUE PUEDAN SER REPARADAS POR
EL USUARIO.
El símbolo de un rayo dentro de un triángulo equilátero se usa internacionalmente para alertar al
usuario de la presencia de “voltajes peligrosos no aislados dentro de la carcasa del aparato que
pueden ser de magnitud suficiente para constituir un riesgo real de descarga eléctrica para las
personas.
El símbolo de exclamación dentro de un triángulo equilátero se utiliza para advertir al usuario
de la existencia de importantes instrucciones de uso y mantenimiento (reparaciones) en los
documentos que acompañan a la unidad.
CUIDADO: PARA EVITAR EL RIESGO DE INCENDIOS O
DESCARGAS ELÉCTRICAS, NO EXPONGA ESTE APARATO A
LA LLUVIA O LA HUMEDAD.
Para EE.UU.
Declaración de conformidad
Modelo: Model 24
Fabricante: TASCAM
Responsable: TEAC AMERICA, INC.
Dirección: 10410 Pioneer Blvd. Suite #1, Santa Fe Springs,
California 90670, U.S.A.
Teléfono: 1-323-726-0303
Este dispositivo cumple con lo indicado en la sección 15 de
las normas FCC y su funcionamiento está sujeto a las dos
condiciones siguientes: (1) este aparato no debe producir
interferencias molestas, y (2) este aparato debe aceptar
cualquier interferencia que reciba, incluso aquellas que
produzcan un funcionamiento no deseado.
PARA EL USUARIO
Se ha verificado que este aparato cumple con los límites
establecidos para las unidades digitales de clase B, de acuerdo
a lo indicado en la sección 15 de las normas FCC. Esos límites
han sido diseñados para ofrecer una protección razonable
contra las interferencias molestas en una instalación no
profesional. Este aparato genera, usa y puede irradiar energía
de radiofrecuencias y, si no es instalado y usado de acuerdo a
este manual de instrucciones, puede producir interferencias
molestas en las comunicaciones de radio. No obstante,
tampoco hay garantías de que no se produzcan ese tipo de
interferencias en una instalación concreta. Si este aparato
produce interferencias molestas en la recepción de la radio
o TV (lo que puede determinar encendiendo y apagando el
aparato), el usuario será el responsable de tratar de corregirlas
usando una o más de las siguientes medidas.
a) Reorientar o reubicar la antena receptora.
b) Aumentar la separación entre este aparato y el receptor.
c) Conectar este aparato a una salida de corriente o regleta
diferente a la que esté conectado el receptor.
d) Consultar a su distribuidor o a un técnico especialista en
radio/TV para que le ayuden.
PRECAUCIÓN
Cualquier modificación en este aparato no aprobada
expresamente y por escrito por TEAC CORPORATION podrá
anular la autorización del usuario a usar dicho aparato.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este aparato cumple con todos los requisitos
establecidos por las Directivas Europeas, así
como por otras Regulaciones de la Comisión
Europea.
En Norteamérica/Canadá utilice solo fuentes de
alimentación de 120 V.
12
TASCAM Model 24
1. Lea estas instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todos los avisos.
4. Siga todo lo indicado en las instrucciones.
5. No utilice este aparato cerca del agua.
6. Limpie este aparato solo con un trapo seco.
7.
No bloquee ninguna de las aberturas de ventilación. Instale
este aparato de acuerdo con las instrucciones del fabricante.
8. No instale este aparato cerca de fuentes de calor como
radiadores, calentadores, hornos o cualquier otro aparato
(incluyendo amplificadores) que produzca calor.
9. No anule el sistema de seguridad que supone un enchufe
de corriente polarizado o con toma de tierra. Un enchufe
polarizado tiene dos bornes de distinta anchura. Uno con
toma de tierra tiene dos bornes iguales y una lámina para
la conexión a tierra. El borne ancho del primer tipo de
enchufe y la lámina del otro se incluyen para su seguridad.
Si el enchufe que se incluye con la unidad no encaja en
su salida de corriente, haga que un electricista cambie su
salida anticuada.
10. Coloque el cable de corriente de forma que no pueda
quedar aplastado o retorcido, especialmente allí donde
estén los conectores, receptáculos y en el punto en que el
cable sale del aparato.
11. Utilice solo accesorios/complementos que hayan sido
especificados por el fabricante.
12. Utilice este aparato solo con un bastidor, soporte, trípode o
superficie especificado por el fabricante o que se venda con
el propio aparato. Cuando utilice un bastidor con ruedas,
tenga cuidado al mover la combinación bastidor/aparato
para evitar posibles daños en caso de que vuelquen.
13. Desconecte de la corriente este aparato durante las
tormentas eléctricas o cuando no lo vaya a usar durante un
periodo de tiempo largo.
14. Consulte cualquier posible avería al servicio técnico oficial.
Este aparato deberá ser revisado cuando se haya dañado de
alguna forma, como por ejemplo si el cable de corriente o
el enchufe se ha roto, si se ha derramado cualquier líquido
o se ha introducido un objeto dentro de la unidad, si el
aparato ha quedado expuesto a la lluvia o la humedad, si no
funciona normalmente o si se ha caído al suelo.
• Este aparato recibe corriente nominal no operativa de la
salida de corriente AC aun cuando su interruptor POWER o
STANDBY/ON no esté en la posición ON.
• El enchufe de alimentación sirve como dispositivo de
desconexión, por lo que colóquelo de forma que siempre
pueda acceder a él fácilmente.
• Una presión sonora excesiva en los auriculares puede
producirle daños auditivos.
• Si experimenta cualquier tipo de problema con este aparato,
póngase en contacto con TEAC para una reparación. No
utilice de nuevo el aparato hasta que no haya sido reparado.
CUIDADO
• No permita que este aparato quede expuesto a
salpicaduras de ningún tipo.
• No coloque objetos que contengan líquidos, como jarrones,
encima de este aparato.
• No instale este aparato encastrado en una librería o mueble
similar.
• El aparato debe estar colocado lo suficientemente cerca de
la salida de corriente como para poder acceder al enchufe
en cualquier momento.
• Si este aparato utiliza pilas, dichas pilas (el bloque de pilas
o las pilas individuales instaladas) no deben ser expuestas a
niveles de calor excesivos como expuestas directamente a
la luz solar o sobre un fuego.
• AVISO para aquellos aparatos que usen pilas de litio
recambiables: existe el riesgo de explosión en caso de que
la pila sea sustituida por otra del tipo incorrecto. Sustituya
la pila únicamente por otra idéntica o equivalente.
PRECAUCIÓN
• Los productos de Clase ! están equipados con una cable
de alimentación con un enchufe con toma de tierra. Por
este motivo, debe conectar el cable de alimentación de
este aparato a una salida de corriente que disponga de una
conexión a toma de tierra de seguridad.
PRECAUCIÓN
• Para evitar posibles daños auditivos, no utilice este
aparato a niveles de volumen excesivos durante
periodos de tiempo prolongados.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
TASCAM Model 24
13
S
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Para los usuarios europeos
Eliminación de aparatos eléctricos y electrónicos y
pilas y/o acumuladores
(a) Nunca debe eliminar un aparato eléctrico o electrónico y/o
pilas/acumuladores junto con el resto de la basura orgánica.
Este tipo de aparatos deben ser depositados en los puntos
limpios” creados a tal efecto por su Ayuntamiento o por la
empresa de limpieza local.
(b) Con la correcta eliminación de los aparatos eléctricos y
electrónicos y/o pilas/acumuladores estará ayudando a
ahorrar valiosos recursos y evitará a la vez todos los efectos
negativos potenciales tanto para la salud como para el
entorno.
(c) Una eliminación incorrecta de este tipo de aparatos y/o
pilas/acumuladores junto con la basura orgánica puede
producir efectos graves en el medio ambiente y en la salud
a causa de la presencia de sustancias potencialmente
peligrosas que pueden contener.
(d) El símbolo del cubo de basura tachado (WEEE)
indica la obligación de separar los aparatos eléctricos
y electrónicos y/o pilas/acumuladores del resto de
basura orgánica a la hora de eliminarlos.
Si la batería o acumulador contiene una cantidad
superior de plomo (Pb), mercurio (Hg) y/o cadmio
(Cd) que los valores especificados en la Directiva
de pilas y baterías (2006/66/EC, 2013/56/EU),
aparecerán los símbolos de estas sustancias químicas
(Pb, Hg y/o Cd) debajo del símbolo del cubo de basura
tachado.
(e) Los llamados puntos limpios” de recogida y retirada
selectiva de este tipo de productos y/o pilas/acumuladores
están disponibles para cualquier usuario final. Para más
información acerca de la eliminación de este tipo de
elementos, póngase en contacto con el departamento
correspondiente de su Ayuntamiento, empresa de limpieza
o recogida de basuras o con el comercio en el que adquirió
este aparato.
Pb, Hg, Cd
14
TASCAM Model 24
Precauciones de aparatos inalámbricos
Conformidad para la emisión de radio e
interferencias
Este producto dispone de la función de emisor de banda amplia
y usa la banda de 2.4 GHz.
Rango de frecuencias usadas: 2400 – 2480 MHz
Potencia salida máxima: Bluetooth® Class 2 (inferior a 2.5 mW)
Utilice este aparato únicamente en el país o región en el que lo
haya adquirido. Dependiendo del país, es posible que existan
determinadas limitaciones al uso de la tecnología inalámbrica
Bluetooth.
Modelo para EE.UU.
Declaración de conformidad
Responsable: TEAC AMERICA, INC.
Dirección: 10410 Pioneer Blvd. Suite #1, Santa Fe
Springs, California 90670, U.S.A.
Teléfono: 1-323-726-0303
Este dispositivo cumple con lo indicado en la sección 15 de
las normas FCC y su funcionamiento está sujeto a las dos
condiciones siguientes: (1) este aparato no debe producir
interferencias molestas, y (2) este aparato debe aceptar
cualquier interferencia que reciba, incluso aquellas que
produzcan un funcionamiento no deseado.
Etiqueta de autorización
FCC ID: XEG-MODEL24
Modelo para la Unión Europea
Por la presente, TEAC Corporation declara
que el dispositivo de radio de este aparato
cumple con la Directiva 2014/53/EU., así como
otras Regulaciones y Directivas de la Comisión
Europea.
El texto completo de la declaración de conformidad para la EU
está disponible en la siguiente página web. En caso de dudas,
póngase en contacto con nosotros vía email.
https://www.tascam.eu/en/kontakt.html
Importador para la UE: TEAC Europe GmbH
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
Requisitos de exposición a radiaciones
Este aparato cumple con todas las normativas y regulaciones,
reconocidas internacionalmente, relacionadas con la exposición
de los seres humanos a las ondas de radio generadas por el
transmisor.
Declaración de cumplimiento
Modelo para EE.UU.
Este aparato cumple con los límites de exposición a
radiaciones expuestos en la FCC/IC en lo relativo a entornos no
controlados y cumple con las reglas generales de exposición a
radiofrecuencias.
Modelo para EE. UU./Canadá
Este aparato digital de clase B cumple con la Normativa
Canadiense ICES-003.
Este aparato cumple con los límites de exposición a
radiaciones expuestos en la FCC/IC en lo relativo a entornos no
controlados y cumple con las reglas generales de exposición
a radiofrecuencias (RF) FCC y con las normas de exposición a
radiofrecuencias (RF) RSS-102 del IC. Este equipo tiene niveles
muy bajos de energía de RF que quedan sobradamente por
debajo de los valores indicados en la evaluación de exposición
máxima (MPE). Aún así es recomendable que lo instale y utilice
con el emisor a una distancia mínima de 20 cm con respecto al
cuerpo de cualquier persona (excluyendo extremidades: manos,
brazos, pies y piernas).
Modelo para la Unión Europea
Este equipo cumple con la norma EN.62311; Evaluación
de equipos eléctricos y electrónicos en relación a las
restricciones en la exposición de las personas a los campos
electromagnéticos; standard armonizado por la DIRECTIVA
2014/53/EU.
TASCAM Model 24
15
Contents
IMPORTANT SAFETY INSTRUCTIONS .................................... 3
Wireless equipment precautions ........................................... 6
1 – Introduction ..................................................................... 16
Using the TEAC Global Site ................................................................ 16
Features .................................................................................................... 16
Items included with this product .................................................... 17
Conventions used in this manual.................................................... 17
Product registration ............................................................................. 17
Precautions for placement and use................................................ 17
Notes about power supply ................................................................ 17
Beware of condensation .................................................................... 17
Cleaning the unit .................................................................................. 17
About TASCAM customer support service .................................. 17
About SD cards ...................................................................................... 18
Precautions for use .......................................................................... 18
SD card write protection................................................................ 18
Note about formatting ................................................................... 18
Bluetooth® ............................................................................................... 18
Profiles .................................................................................................. 18
Codecs .................................................................................................. 18
Content protection .......................................................................... 18
Transmission security ..................................................................... 18
2 – Names and Functions of Parts ........................................ 19
Top panel ................................................................................................. 19
Analog input jack section.............................................................. 20
Input channel mixing section ...................................................... 21
Analog output jack section .......................................................... 22
Screen operation section .............................................................. 22
Built-in effects operation section ............................................... 23
Analog output adjustment section ........................................... 24
Rear panel ................................................................................................ 24
Home Screen .......................................................................................... 25
Meters Screen......................................................................................... 26
Meter Screen details ........................................................................ 26
Menu structure ...................................................................................... 27
Basic MENU screen operations ........................................................ 27
Menu operation procedures ........................................................ 27
3 – Preparation ....................................................................... 28
Connecting other equipment .......................................................... 28
Connecting microphones ............................................................. 29
Connecting guitars, basses and similar instruments........... 29
Connecting electronic devices and other audio
equipment .......................................................................................... 29
Connecting monitor speakers ..................................................... 29
Connecting headphones ............................................................... 29
Connecting a computer ................................................................. 29
Connecting with Bluetooth devices .......................................... 29
Inserting and removing SD cards ................................................... 30
Inserting SD cards ............................................................................ 30
Removing SD cards .......................................................................... 30
SD card write protection switches ............................................. 30
Turning the power on and off .......................................................... 30
Setting the built-in clock date and time ....................................... 31
Adjusting the display........................................................................... 31
Adjusting the display contrast .................................................... 31
Adjusting the display brightness ................................................ 31
Preparing an SD card for use ............................................................ 31
4 – Managing Songs .............................................................. 32
Viewing the song list ........................................................................... 32
Song Operation ..................................................................................... 32
Creating a New Song ........................................................................... 32
Loading Songs ....................................................................................... 33
Saving the current song ..................................................................... 33
Viewing song information ................................................................. 33
Clearing all marks ................................................................................. 33
Deleting songs ....................................................................................... 33
Protecting/unprotecting songs ....................................................... 34
Editing song names ............................................................................. 34
Editing text ......................................................................................... 34
Loading songs created on different TASCAM Model series
products ................................................................................................... 35
5 – Basic recording .................................................................36
Selecting the input source ................................................................ 36
Setting the MODE switch ................................................................... 36
Setting phantom power ..................................................................... 36
Monitoring .............................................................................................. 36
SIG indicators and level meters ....................................................... 37
Recording ................................................................................................ 37
Undoing operations ............................................................................. 38
Undoing the previous operation ................................................ 38
Using the built-in effects .................................................................... 38
Setting the built-in effect .............................................................. 38
6 – Recorder functions...........................................................40
Locate function ...................................................................................... 40
Changing the playback position................................................. 40
Using the direct locate function to locate ............................... 40
Repeat playback function .................................................................. 40
Punch in/out function ......................................................................... 40
Using the footswitch to punch in/out ...................................... 40
Setting up the footswitch ............................................................. 41
Setting the footswitch polarity ................................................... 41
Automatic punch in/out function.................................................. 41
Setting the punch in/out points ................................................. 41
Setting a pre roll point ................................................................... 42
Rehearsing punching in and out ................................................ 42
Using automatic punching in and out ..................................... 42
7 – Track editing .....................................................................43
Clearing tracks ....................................................................................... 43
Importing tracks .................................................................................... 43
Stereo mix export function ............................................................... 44
8 - Mark functions .................................................................. 45
Using mark functions .......................................................................... 45
Adding marks ......................................................................................... 45
Moving between marks ...................................................................... 45
Clearing individual marks .................................................................. 45
9 – Settings and Information ................................................ 46
Viewing information ............................................................................ 46
CARD Screen ...................................................................................... 46
SONG Screen ...................................................................................... 46
FIRMWARE Screen ............................................................................ 46
Setting the song name format ......................................................... 46
Setting the WORD item .................................................................. 46
Setting MIDI time code operation .................................................. 47
Restoring factory default settings .................................................. 47
Formatting SD cards ............................................................................ 47
Playing WAV files on SD cards (SD PLAY mode) ......................... 48
10 –Using a computer to transfer data ................................49
Connecting with a Computer ........................................................... 49
Disconnecting ................................................................................... 49
Loading WAV files from a computer ............................................... 50
11 – USB audio interface functions ...................................... 51
Installing the dedicated software ................................................... 51
Installing the Windows dedicated software ........................... 51
16
TASCAM Model 24
Thank you very much for purchasing the
TASCAM Model 24 Multitrack Live Recording Console.
Before using this unit, read this Owners Manual carefully so that
you will be able to use it correctly and enjoy working with it for
many years. After you have finished reading this manual, please
keep it in a safe place for future reference.
Using the TEAC Global Site
You can download updates for this unit from the TEAC Global
Site:
http://teac-global.com/
In the TASCAM Downloads section, select the desired language
to open the Downloads website page for that language.
Features
0 22 input analog mixer with 22 line and 16 mic inputs
0 Multitrack recording and playback with 24-track recording
(22 input channels and MAIN MIX L/R bus)
0 USB audio interface functions built-in
o 24 tracks (22 input channels and MAIN MIX L/R bus) can
be input to the computer
o 22 track outputs and computer outputs can be assigned
to channel inputs
o Supports USB 2.0 audio with resolutions up to 24-bit and
48kHz sampling frequency
0 Analog compressors included on channel 1-12 inputs
0 100mm faders enable precise adjustments
0 LINE/INST (BAL) input jacks that support high impedance
(Hi-Z) on channels 1-2
0 Channel inserts (INSERT) on channels 1-2
0 Multiple buses include stereo main (MAIN MIX L/R bus), sub
(SUB L/R bus) and monitor (MONITOR OUT 1/2)
0 3 AUX sends (MON 1/MON 2/FX)
0 Input channels have 3-band semi-parametric EQs with ad-
justable mid frequencies
0 Outputs have a 7-band stereo graphic EQs useful for adjust-
ing the mix
0 16 TASCAM preset effects can be used for a variety of appli-
cations
0 Multitrack recording and playback possible using SD cards
0 Bluetooth® audio playback and recording supported
0 Punching in and out function per track (including punching
in and out automatically and with footswitches)
0 SD/SDHC cards and SDXC cards (Class 10 or more)
0 Multiple footswitch functions available (select play/pause,
effect muting or punch in/out)
0 CONTROL ROOM L/R and PHONES outputs built-in (levels can
be adjusted and PFL/AFL L/R bus monitoring can be enabled
separately)
Contents
Installing the Mac dedicated software ..................................... 52
Working with Gatekeeper ............................................................. 52
Uninstalling the dedicated software ............................................. 54
Uninstalling the Windows dedicated software ..................... 54
Uninstalling the Mac dedicated software ............................... 54
Opening the Settings Panel .............................................................. 54
Windows .............................................................................................. 54
Mac ........................................................................................................ 54
Notification function ........................................................................... 54
Settings Panel overview ..................................................................... 54
Setting Sound Properties ................................................................... 55
Simultaneous ASIO/WDM playback ............................................... 55
12 – Messages ........................................................................56
13 – Troubleshooting ............................................................58
14 – Specifications .................................................................60
General ..................................................................................................... 60
Inputs and outputs ............................................................................... 60
Analog audio input and output ratings ................................... 60
Control input/output ...................................................................... 61
Computer system requirements ..................................................... 61
Windows .............................................................................................. 61
Mac ........................................................................................................ 61
Supported audio drivers ................................................................ 61
Audio performance .............................................................................. 61
Bluetooth ................................................................................................. 62
Other ......................................................................................................... 62
Dimensional drawings ........................................................159
Block diagram ...................................................................... 160
Level diagram ......................................................................161
1 – Introduction
TASCAM Model 24
17
1 – Introduction
Items included with this product
This product includes the following items.
Take care when opening the package to avoid damaging the
items. Keep the packing materials for transportation in the
future. Please contact the store where you purchased this unit
if any of these items are missing or have been damaged during
transportation.
0 Main unit................................................................................................× 1
0 Power cord.............................................................................................× 1
0 Owners Manual (this document) including warranty...........× 1
Conventions used in this manual
In this manual, we use the following conventions:
0 When we refer to buttons, connectors and other parts of this
unit and other equipment, we use a bold font like this: MENU
button.
0 When we show characters that appear on the display, the
typeface looks like this: MENU .
0 The four buttons under the display are called the function
buttons. From left to right, they are shown as buttons F1,
F2, F3 and F4. Moreover, the functions at the bottoms of the
screens will be shown after the button names.
Examples: F1 button, F4 button
0 SD/SDHC/SDXC memory cards are referred to as “SD cards”.
0 Computers, portable audio devices and other equipment
connected to this unit using Bluetooth are called “Bluetooth
devices”.
0 Groups of recorded data are referred to as songs”.
0 The song that is currently selected is called the current song.
0 Information shown on a computer display is written like this:
OK .
0 As necessary, additional information is provided under TIP,
NOTE and CAUTION headings.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
ATTENTION
Failure to follow these instructions could result in damage to
equipment or lost data, for example.
V
CAUTION
Failure to follow these instructions could result in injury.
Product registration
Customers in the USA, please visit the following TASCAM web-
site to register your TASCAM product online.
https://tascam.com/us/
Precautions for placement and use
0 The operating temperature range of this unit is 5–35 °C.
0 Do not install this unit in the following types of locations.
Doing so could make the sound quality worse or cause mal-
function.
Places with significant vibrations
Next to a window or in another location exposed to direct
sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
0 To enable good heat dissipation, do not place anything on
top of the unit.
0 Do not place the unit on top of a power amplifier or other
device that generates heat.
Notes about power supply
0 Insert the included power cord all the way into the AC IN
connector.
0 Do not connect a power supply other than one that is
AC100V - 240V (50/60Hz).
0 Hold the power cord by its plug when connecting or discon-
necting it.
Beware of condensation
Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change.
To prevent this, or if this occurs, let the unit sit for one or two
hours at the new room temperature before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not wipe with
chemical cleaning cloths, thinner, alcohol or other chemical
agents. Doing so could damage the surface or cause discoloration.
About TASCAM customer support service
TASCAM products are supported and warrantied only in their
country/region of purchase.
To receive support after purchase, on the TASCAM Distributors
list page of the TEAC Global Site (http:// teac-global.com/),
search for the local company or representative for the region
where you purchased the product and contact that organization.
When making inquiries, the address (URL) of the shop or web
shop where it was purchased and the purchase date are required.
Moreover, the warranty card and proof of purchase might also be
necessary.
18
TASCAM Model 24
1 – Introduction
About SD cards
This unit uses SD cards for recording and playback.
This unit can use SD cards that are Class 10 or higher and com-
patible with SD, SDHC or SDXC standards.
A list of SD cards that have been confirmed for use with this unit
can be found on our web site. Please access to a product page of
this product from the TEAC Global Site (http://teac-global.com)
to find the list or contact the TASCAM customer support service.
Precautions for use
SD cards are delicate media.
In order to avoid damaging SD cards, please take the following
precautions when handling them.
0 Do not leave them in extremely hot or cold places.
0 Do not leave them in extremely humid places.
0 Do not let them get wet.
0 Do not put things on top of them or twist them.
0 Do not hit them.
0 Do not remove or insert them during recording, playback,
data transmission or other access.
0 When transporting them, put them into cases, for example.
SD card write protection
This unit writes track information to the media in order to im-
prove operation performance. Since, for example, setting infor-
mation cannot be written to SD cards that are write-protected,
settings will not be retained when the unit is restarted and
performance will be otherwise affected.
Note about formatting
SD cards formatted by this unit are optimized to improve perfor-
mance during recording. Use this unit to format the SD cards to
be used with it. Errors might occur when recording with this unit
using an SD card formatted by a computer or other device.
Bluetooth®
This unit has a built-in Bluetooth audio receiver, and can input
sound played on a computer or portable audio device that
supports Bluetooth (Bluetooth device).
ATTENTION
The Bluetooth function of this unit is not guaranteed to en-
able connection or operation with all Bluetooth devices.
Profiles
This unit supports the following Bluetooth profiles.
0 A2DP (Advanced Audio Distribution Profile)
In order to transfer audio by Bluetooth, the Bluetooth device
must support A2DP.
Even if a Bluetooth device supports the same profiles, though,
its functions might differ according to its specifications.
Codecs
This unit supports the following codecs. It will automatically
select one of them during audio transfer.
0 SBC
0 AAC
The unit will select the appropriate codec to use according to
the codec compatibility of the other Bluetooth device and com-
munication conditions.
NOTE
i You cannot select the codec to be used by pressing a button,
for example.
i Due to characteristics of Bluetooth wireless technology,
playback from this unit will be slightly delayed compared to
playback from the Bluetooth device.
Content protection
This unit supports SCMS-T as a form of content protection when
transmitting audio, so it can play protected audio.
Transmission security
This unit supports security functions during Bluetooth transmis-
sion in accordance with the Bluetooth standard specifications,
but it does not guarantee the privacy of such transmissions.
TEAC CORPORATION will bear no responsibility should an infor-
mation leak occur during transmission by Bluetooth.
TASCAM Model 24
19
2 – Names and Functions of Parts
Top panel
a Analog input jack section
Use this section to connect the input jacks for each channel
and to adjust the input levels.
b Input channel mixing section
Use this section to choose input sources for each channel,
adjust compressors and equalizers, and set levels sent to
each bus (MAIN MIX L/R, PFL/AFL L/R, MONITOR OUT 1/2, FX,
SUB L/R).
c Analog output jack section
Use this section to connect the output jacks and adjust the
output equalizer.
d Screen operation section
Use this section to operate the meter, home and MENU screens
shown on the display.
e Built-in effects operation section
Operate the built-in effects and adjust the output levels for
each output in this section.
f Analog output adjustment section
Adjust the output levels from the MAIN OUTPUT, SUB
OUTPUT, OUTPUT MON 1 and OUTPUT MON 2 jacks in this
section.
20
TASCAM Model 24
2 – Names and Functions of Parts
Analog input jack section
1 MIC input jacks (1-12, 13/14-19/20)
These are balanced XLR jacks for mic input.
o XLR (1: GND, 2: HOT, 3: COLD)
2 LINE/INST (BAL) mono input jacks (1-2)
These standard TRS jacks are mono line inputs.
When directly connecting a guitar, bass or other instrument,
set the INST switch to on (pushed in).
o TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
3 LINE (BAL) input jacks (3-12)
These standard TRS jacks are line inputs.
o TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
4 L/MONO (BAL)/R (BAL) stereo input jacks (13/14-
19/20)
These standard TRS jacks are stereo line inputs.
If only the L/MONO (BAL) jack in a pair is connected, the
same signal was be sent to both left and right channels.
o TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
5 −10dBV (external input) jacks (21/22, RCA pin)
These RCA pin jacks are analog line inputs.
Use RCA cables to connect CD players and similar devices to
these jacks.
6 STEREO input jack (21/22, stereo mini)
This stereo mini jack is a line input jack.
Use this to connect with the line output jack of a tablet or
other external device.
7 INSERT jacks (1-2, standard)
Use these standard TRS jacks to connect external devices
(effects).
o TRS (Tip: SEND, Ring: RETURN, Sleeve: GND)
8 GAIN knobs and SIG indicators (1-12, 13/14-19/20)
Use the GAIN knobs to adjust the input levels of each chan-
nel.
its SIG indicator will light green when a signal is input (−
56dB or higher).
If a SIG indicator stays lit red continuously, lower the GAIN
knob.
9 LOW CUT switches (1-12, 13/14-19/20)
Turn this switch on (pushed in) to enable low cut filters that
cut noise and other sounds at low frequencies.
0 INST switches (1-2)
Set according to the LINE/INST (BAL) input jack input sourc-
es.
Turn the INST switch on (pushed in) when connecting an
guitar, bass or other equipment with high output impedance.
Turn the INST switch off (not pushed in) when connecting
electronic instruments, audio devices, mics and other equip-
ment.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164

Tascam Model 16 Le manuel du propriétaire

Catégorie
Mélangeurs audio
Taper
Le manuel du propriétaire
Ce manuel convient également à