JVC KD-HDW10J Manuel utilisateur

Catégorie
Récepteurs multimédia de voiture
Taper
Manuel utilisateur

Ce manuel convient également à

ENGLISH
ESPAÑOL
FRANÇAIS
CD RECEIVER KD-HDW10
RECEPTOR CON CD KD-HDW10
RECEPTEUR CD KD-HDW10
For canceling the display demonstration, see page 7.
Para cancelar la demostración en pantalla, consulte la página 7.
Pour annuler la démonstration des affichages, référez-vous à la page 7.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information
for future reference.
Model No.
Serial No.
LVT1706-001A
[J]
2
ENGLISH
How to reset your unit
Your preset adjustments will also be erased.
How to forcibly eject a disc
If this does not work, reset your unit.
Be careful not to drop the disc when it ejects.
How to use the MODE button
If you press MODE, the unit goes into functions
mode, then the number buttons and 5/
buttons work as different function buttons.
Ex.: When number button 2 works as
MO (monaural) button...
To use these buttons for their original
functions again after pressing MODE, wait for
5 seconds without pressing any of these buttons
until the functions mode is cleared or press
MODE again.
Time countdown indicator
INFORMATION (For U.S.A.)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
Caution:
Changes or modifications not approved
by JVC could void the user’s authority to
operate the equipment.
[European Union only]
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2.
CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
3.
CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare
into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not
view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
ENGLISH
3
How to read this manual
Button operations are mainly explained with
the illustrations in the table below.
Some related tips and notes are explained in
“More about this unit” (see pages 24 – 26).
Press briefly.
Press repeatedly.
Press either
one.
Press and hold until your
desired response begins.
Press and hold both
buttons at the same time.
The following marks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
: Indicator displayed for the
corresponding operation.
How to detach/attach the control
panel
CONTENTS
Control panel ................................... 4
Remote controller —
RM-RK50 .............. 5
Getting started ................................. 6
Basic operations .................................................... 6
Radio operations .............................. 8
Disc operations ................................. 11
Playing a disc in the unit ...................................... 11
Playing discs in the CD changer ............................ 11
Sound adjustments ........................... 14
General settings — PSM ................... 17
Satellite radio operations .................. 19
iPod®/D. player operations ................ 22
Other external component operations
... 24
More about this unit ......................... 24
Maintenance .................................... 27
Troubleshooting ............................... 28
Specifications ................................... 31
For safety...
Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in
the car becomes normal before operating the
unit.
Detaching...
Attaching...
Warning:
If you need to operate the unit while driving,
be sure to look ahead carefully or you may be
involved in a traffic accident.
EN_KD-HDR1[J].indb 3EN_KD-HDR1[J].indb 3 06.1.23 10:06:57 AM06.1.23 10:06:57 AM
4
ENGLISH
Control panel — KD-G612/KD-G611/KD-G511
1 4 /¢ buttons
2
(standby/on attenuator) button
3 5 (up) / (down) buttons
4 Loading slot
5 Display window
6 0 (eject) button
7 CS-A (SRS Circle Surround Auto
TM
) button
8 Remote sensor
DO NOT expose the remote sensor to strong
light (direct sunlight or artificial lighting).
9 SRC (source) button
p BAND button
q Control dial
w SEL (select) button
e EQ (equalizer) button
r MO (monaural) button
t SSM (Strong-station Sequential Memory)
button
y Number buttons
u HOLD button
i RPT (repeat) button
o RND (random) button
; MODE button
a DISP (display) button
s
(control panel release) button
Display window
d Information indicators—TAG (ID3 Tag),
(folder), (track/file, CS II encoded
HD Radio™ signal)
f Disc type indicators—WMA, MP3
g Playback source indicators—
CH:
Lights up only when CD-CH is
selected as the playback source.
DISC:Lights up for the built-in CD player.
h Playback mode / item indicators—
RND (random),
(disc), (folder),
RPT (repeat)
j EQ (equalizer) indicator
k Sound mode (preset equalizer) indicators—
JAZZ, CLASSIC, HIP HOP, POPS, ROCK,
USER
l Tr (track) indicator
/ Sub-display
z Main display
x Tuner reception indicators—ST (stereo),
MO (monaural), HOLD (reception hold),
HD (HD Radio)
Parts identification
Display window
Control panel
EN_KD-HDR1[J].indb 4EN_KD-HDR1[J].indb 4 06.1.23 10:06:58 AM06.1.23 10:06:58 AM
ENGLISH
5
Remote controller — RM-RK50
Installing the lithium coin battery
(CR2025)
Aim the remote controller directly at the
remote sensor on the unit. Make sure there is
no obstacle in between.
Warning:
Do not install any battery other than
CR2025 or its equivalent; otherwise, it may
explode.
Store the battery in a place where children
cannot reach to avoid risk of accident.
To prevent the battery from over-heating,
cracking, or starting a fire:
Do not recharge, short, disassemble, heat
the battery, or dispose of it in a fire.
Do not leave the battery with other
metallic materials.
Do not poke the battery with tweezers or
similar tools.
Wrap the battery with tape and insulate
when throwing away or saving it.
Caution:
Main elements and features
1 (standby/on/attenuator) button
Turns the power on if pressed briefly or
attenuates the sound when the power is
on.
Turns the power off if pressed and held.
2 5 U (up) / D (down) buttons
Changes the FM/AM bands with 5 U.
Changes the preset stations with D .
Changes the folder of the MP3/WMA
discs.
While playing an MP3 disc on an
MP3-compatible CD changer:
Changes the disc if pressed briefly.
Changes the folder if pressed and held.
While listening to the satellite (SIRIUS or
XM) radio:
Changes the categories.
While listening to an Apple iPod
®
or a
JVC D. player:
Pauses/stops or resumes playback with
D .
Enters the main menu with 5 U.
(Now 5 U/D /2 R/F 3 work as the
menu selecting buttons.)*
3 VOL – / VOL + buttons
Adjusts the volume level.
* 5 U : Returns to the previous menu.
D : Confirms the selection.
To be continued...
For USA-California Only
This product contains a CR Coin Cell Lithium Battery which
contains Perchlorate Material—special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
6
ENGLISH
Getting started
Basic operations
~ Turn on the power.
Ÿ
* You cannot select these sources if they
are not ready or not connected.
!
For conventional FM/AM stations
and HD Radio stations
For SIRIUS radio
For XM radio
4 SOUND button
Selects the sound mode (EQ mode.)
5 SOURCE button
Selects the source.
6 2 R (reverse) / F (forward) 3 buttons
Searches for stations if pressed briefly.
Searches for HD Radio stations if pressed
and held.
Fast-forwards or reverses the track if
pressed and held.
Changes the tracks if pressed briefly.
While listening to the satellite radio:
Changes the channels if pressed briefly.
Changes the channels rapidly if pressed
and held.
While listening to an iPod or a D. player
(in menu selecting mode):
Selects an item if pressed briefly. (Then,
press D to confirm the selection.)
Skips 10 items at a time if pressed and
held.
EN_KD-HDR1[J].indb 6EN_KD-HDR1[J].indb 6 06.1.23 10:07:00 AM06.1.23 10:07:00 AM
7
ENGLISH
@ Adjust the sound as you want. (See
pages 14 – 16.)
To drop the volume in a
moment (ATT)
To restore the sound, press
it again.
To turn off the power
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume before
playing a disc to avoid damaging the speakers
by the sudden increase of the output level.
Volume level indicator
Volume level appears.
Adjust the volume.
Basic settings
See also “General settings — PSM” on pages
17 and 18.
1
2
1 Canceling the display
demonstrations
Select “DEMO,” then “DEMO OFF.”
2 Setting the clock
Select “CLOCK H” (hour), then adjust
the hour.
Select “CLOCK M” (minute), then
adjust the minute.
3 Finish the procedure.
To check the current clock
time when the power is
turned off
EN_KD-HDR1[J].indb 7EN_KD-HDR1[J].indb 7 06.1.23 10:07:00 AM06.1.23 10:07:00 AM
8
ENGLISH
Only for HD Radio multicast channels:
Select your desired channel.
Channel number appears on the sub-
display.
ST indicator
Radio operations
You can tune in to both conventional stations
and HD Radio stations.
If you want to search for HD Radio stations
only, see “To search for HD Radio stations
only—HD Search” on page 9.
~
Ÿ
Selected band appears on the sub-display.
! Start searching for a station.
When a station is received, searching stops.
ST indicator lights up when the unit
receives a stereo signal.
When an HD Radio station is received,
the HD indicator and station call sign
appear on the display.
indicator lights up when the unit
receives an HD Radio signal encoded
with CS II (SRS Circle Surround II
TM
.)
When an HD Radio station is tuned in...
Analog signals are received first for a
few seconds before digital signals are
received.
CH1
CH2
CH3
What is HD Radio
TM
?
This unit is equipped with an HD Radio receiver.
HD Radio can deliver high-quality digital
sound—AM digital will have FM-like sound
quality (in stereo) and FM digital will have CD-
like sound quality—with static-free and clear
reception. Furthermore, stations can offer text
and data, such as artist names and song titles.
HD Radio receivers can also receive
conventional analog broadcasts.
Many HD Radio stations also offer more
than one channel of programming. This
service is called multicasting.
To find HD Radio stations in your area,
please visit www.hdradio.com <http://www.
hdradio.com/>.
To stop searching, press the same button
again.
This indicator lights up when digital audio is
played, while it flashes when analog audio is
played.
Call Sign
EX.: When receiving an HD Radio station
EX.: When receiving an HD Radio multicast station
Channel number Channel number
First four letters of Call Sign
EX.: When receiving conventional FM station
Selected band
Selected frequency
EN_KD-HDR1[J].indb 8EN_KD-HDR1[J].indb 8 06.1.23 10:07:01 AM06.1.23 10:07:01 AM
9
ENGLISH
When an FM stereo broadcast is hard to receive
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO
indicator goes off.
To change the HD Radio reception mode
While receiving an HD Radio broadcast,
received signals may alternate between digital
and analog due to the receiving condition.
If you want to cancel this function, follow the
procedure below.
While listening to an HD Radio station...
1
To tune in to a station manually—
Manual Search
In step ! on page 8...
1
2 Select the desired station frequencies.
The unit starts HD Search when you press
MODE, then press 4 /¢ briefly.
Before starting Manual Search, select
“MANUAL” for “S MODE”.
(See page 18.)
To search for HD Radio stations only—
HD Search
In step ! on page 8...
When an HD Radio station is received,
searching stops.
The unit starts Manual Search when you
press MODE, then press 4 /¢
briefly.
2
DIGITAL : For playing digital audio only.
ANALOG : For playing analog audio only.
AUTO : For automatic switching between
digital and analog audio.
If no sound comes out with current setting
selected, change the setting to ANALOG or
DIGITAL.
The setting automatically returns to AUTO in
the following cases:
When you tune in to another station.
When you change to another source.
When you turn off the power.
This setting cannot affect conventional FM/
AM stations.
If the radio station forces the reception mode
to digital, the HOLD indicator flashes.
Lights up when monaural mode is activated.
Before starting HD Search, select “HD
SEEK” for “S MODE”. (See page 18.)
HOLD indicator lights up.
Lights up when holding the reception digital,
flashes when holding the reception analog.
EN_KD-HDR1[J].indb 9EN_KD-HDR1[J].indb 9 06.1.23 10:07:02 AM06.1.23 10:07:02 AM
10
ENGLISH
Storing stations in memory
You can preset six stations for each band.
Station automatic presetting —SSM
(Strong-station Sequential Memory)
1 Select the band you want to store into.
2
3
“SSM” flashes, then disappears when
automatic presetting is over.
Local stations with the strongest signals are
searched and stored automatically in the
selected band.
HD Radio stations are given priority to be
stored.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
3
Preset number flashes for a while.
Listening to a preset station
1
2 Select the preset station (1 – 6) you
want.
Changing the display information
Clock : Shows the clock.
Call Sign*
1
: Shows the information of
HD Radio station received
Frequency : Shows the station frequency.
PTY*
2
: Shows the genre of the
HD Radio program received
(Program Type.)
Text*
3
: Shows the Title/Artist/Album
name of the current segment
Station frequency appears for a while...
When you change the frequency.
When you change the band.
While receiving an HD Radio multicast
station, the sub-display shows its channel
number.
*
1
Only for HD Radio stations.
****
-FM” or “
****
” appears when no Call
Sign is received.
*
2
When no program type (PTY) is received,
“HD RADIO” appears for HD Radio stations,
and “ANALOG” appears for analog stations.
*
3
“NO TEXT” appears when no text is received.
Clock
PTY*
2
Text*
3
Call Sign*
1
Frequency
EN_KD-HDR1[J].indb 10EN_KD-HDR1[J].indb 10 06.1.23 10:07:03 AM06.1.23 10:07:03 AM
11
ENGLISH
Disc operations
Playing a disc in the unit
All tracks will be played repeatedly until you
change the source or eject the disc.
To stop play and eject the
disc
Playing discs in the CD changer
All discs in the magazine will be played
repeatedly until you change the source.
Ejecting the magazine will also stop playing.
~
* If you have changed the external input
setting to “EXT IN” (see page 18), you
cannot select the CD changer.
Ÿ Select a disc.
For disc number from 01 – 06:
For disc number from 07 – 12:
About MP3 and WMA discs
MP3 and WMA “tracks” (words “file” and
“track” are used interchangeably) are recorded
in “folders.”
About the CD changer
It is recommended to use a JVC
MP3-compatible CD changer with your unit.
You can also connect other CH-X series CD
changers (except CH-X99 and CH-X100).
These units are not compatible with MP3
discs.
You cannot play any WMA disc in the CD
changer.
You cannot use the KD-MK series CD
changers with this unit.
Disc text information recorded in the CD
Text can be displayed when a JVC CD Text
compatible CD changer is connected.
For connection, see Installation/Connection
Manual (separate volume).
EN_KD-HDR1[J].indb 11EN_KD-HDR1[J].indb 11 06.1.23 10:07:04 AM06.1.23 10:07:04 AM
12
ENGLISH
To fast-forward or reverse the track
To go to the next or previous tracks
To go to the next or previous folders (only for
MP3 or WMA discs)
For MP3 discs:
For WMA discs:
To locate a particular track (for CD) or folder
(for MP3 or WMA discs) directly
To select a number from 01 – 06:
To select a number from 07 – 12:
To use direct folder access on MP3/WMA
discs, it is required that folders are assigned
with 2-digit numbers at the beginning of their
folder names—01, 02, 03, and so on.
To select a
particular track in a
folder (for MP3 or
WMA discs):
Other main functions
Skipping tracks quickly during play
Only possible on JVC
MP3-compatible CD changer
For MP3 or WMA discs, you can skip tracks
within the same folder.
Ex.: To select track 32 while playing a track
whose number is a single digit (1 to 9).
1
2
Each time you press the button, you can
skip 10 tracks.
After the last track, the first track will be
selected and vice versa.
3
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same
procedure.
EN_KD-HDR1[J].indb 12EN_KD-HDR1[J].indb 12 06.1.23 10:07:05 AM06.1.23 10:07:05 AM
13
ENGLISH
Changing the display information
While playing an audio CD or a CD Text
While playing an MP3 or a WMA
*
2
disc
When “TAG DISP” is set to
“TAG ON” (see page 18)
When “TAG DISP” is set to
“TAG OFF”
: Clock with the current track number
: Elapsed playing time with the
current track number
*
1
If the current disc is an audio CD,
“NO NAME” appears.
*
2
Only for the built-in CD player.
*
3
If an MP3/WMA file does not have Tag
information, folder name and file name
appear. In this case, the TAG indicator will
not light up.
Selecting the playback modes
You can use only one of the following playback
modes at a time.
1
2 Select your desired playback mode.
7 Repeat play
Mode Plays repeatedly
TRK RPT : The current track.
FLDR RPT*
1
: All tracks of the current
folder.
DISC RPT*
2
: All tracks of the current
disc.
RPT OFF : Cancels.
7
Random play
Mode Plays at random
FLDR RND*
1
: All tracks of the current
folder, then tracks of the
next folder and so on.
DISC RND : All tracks of the current
disc.
MAG RND*
2
: All tracks of the inserted
discs.
RND OFF : Cancels.
*
1
Only while playing an MP3 or a WMA
disc.
*
2
Only while playing discs in the CD
changer.
EN_KD-HDR1[J].indb 13EN_KD-HDR1[J].indb 13 06.1.23 10:07:06 AM06.1.23 10:07:06 AM
14
ENGLISH
2 Select your desired frequency.
3
Adjusted frequency level
will be stored.
Indication [Range]
FREQ 60
Adjust the level of 60 Hz. [-05 to +05]
FREQ 150
Adjust the level of 150 Hz. [-05 to +05]
FREQ 400
Adjust the level of 400 Hz. [-05 to +05]
FREQ 1K
Adjust the level of 1 kHz. [-05 to +05]
FREQ 2.4K
Adjust the level of 2.4 kHz. [-05 to +05]
FREQ 6K
Adjust the level of 6 kHz. [-05 to +05]
FREQ 15K
Adjust the level of 15 kHz. [-05 to +05]
4 Repeat the procedure from steps 2
and 3 to change other frequencies.
Sound adjustments
Using EQ mode
You can select and customize a preset sound
mode suitable to the music source using the
7-band equalizer.
To select a preset EQ mode
1
2
USER : Flat sound.
ROCK : For rock or disco music.
CLASSIC : For classical music.
POPS : For light music.
HIP HOP : For funk or rap music.
JAZZ : For jazz music.
To change a frequency level of a preset EQ
mode
1 Select your desired preset mode to
customize, referring to “To select a
preset EQ mode” above, then...
Adjustable frequency level appears.
EX.: When FREQ 60 of JAZZ is selected.
FREQ 60
FREQ 150
FREQ 400
FREQ 1K
FREQ 2.4K
FREQ 6K
FREQ 15K
Mode
Initial level of each frequency
60 Hz 150 Hz 400 Hz 1 kHz 2.4 kHz 6 kHz 15 kHz
USER
00 00 00 00 00 00 00
ROCK
+03 +02 00 00 +01 +02 +01
CLASSIC
+01 +03 +01 00 00 +02 00
POPS
00 +02 00 00 00 +01 +02
HIP HOP
+04 +01 -01 -02 00 +01 00
JAZZ
+03 +02 +01 +01 +01 +03 +01
Initial settings of preset EQ mode
EN_KD-HDR1[J].indb 14EN_KD-HDR1[J].indb 14 06.1.23 10:07:07 AM06.1.23 10:07:07 AM
15
ENGLISH
Adjusting the sound balance
1
2
Indication [Range]
FAD*
1,
*
2
(fader)
Adjust the front and rear speaker balance.
[R06 to F06]
BAL*
2
(balance)
Adjust the left and right speaker balance.
[L06 to R06]
SUB.W*
3
(subwoofer)
Adjust the subwoofer output level. [00 to 08]
VOL (volume)
Adjust the volume. [00 to 30 or 50*
4
]
*
1
If you are using a two-speaker system, set the
fader level to “00.”
*
2
This adjustment cannot affect the subwoofer
output.
*
3
This takes effect only when a subwoofer is
connected.
*
4
Depending on the amplifier gain control
setting. (See page 18 for details.)
To be continued...
Using SRS Circle Surround Auto
TM
(CS-A mode)
SRS Circle Surround Auto
TM
is a surround
technology specially aimed for car audio, and
it can reproduce 5.1-channel sound system
through conventional 4-door mounted speaker
system (with or without subwoofer.)
SRS Circle Surround Auto
TM
is made of...
SRS Circle Surround II
TM
decoder:
Converts the sound of CD, AM/FM radio
broadcast and other various source into multi-
channel sounds.
SRS FOCUS®:
Elevates the sound field to a more optimal
listening level.
SRS TruBass®:
Creates an ultra rich bass using the standard
speakers with no subwoofer connected.
To select a preset mode of SRS Circle Surround
Auto
TM
TYPE A : For the system of large front
speaker with tweeter and rear
tray speaker.
TYPE B : For the system of large front
speaker with tweeter and door-
mounted rear speaker.
TYPE C : For the system of small front
speaker and door-mounted
rear speaker.
USER : For your preference.
OFF : Cancels CS-A mode.
TYPE A
TYPE B
OFF
USER
TYPE C
EN_KD-HDR1[J].indb 15EN_KD-HDR1[J].indb 15 06.1.23 10:07:09 AM06.1.23 10:07:09 AM
16
ENGLISH
To adjust a preset mode of SRS Circle
Surround Auto
TM
You can adjust the SRS FOCUS®
and the SRS
TruBass® of each preset CS-A mode.
1 Select your desired CS-A mode to
adjust, referring
“To select a preset
mode of SRS Circle Surround Auto
TM
” on
page 15,
then...
Adjustable item appears.
2 Select an item to adjust.
3
Adjusted settings will be
stored.
Indication [Range]
FOCUS F (SRS FOCUS® Front)
Adjust the SRS FOCUS® of the front speaker.
[0 to 9]
FOCUS R (SRS FOCUS® Rear)
Adjust the SRS FOCUS® of the rear speaker.
[0 to 9]
TBASS F
(SRS TruBass® Front)
Adjust the SRS TruBass® of the front speaker.
[0 to 9]
TBASS R (SRS TruBass® Rear)
Adjust the SRS TruBass® of the rear speaker.
[0 to 9]
TBASS W (SRS TruBass® Subwoofer)
Adjust the SRS TruBass® of the subwoofer.
[0 to 9]
4 Repeat the procedure from steps 2
and 3 to change other item.
FOCUS F
FOCUS R
TBASS F
TBASS RTBASS W
Selected item name appears
Level number (0-9.)
Mode
Initial level of each item
FOCUS F FOCUS R TBASS F TBASS R TBASS W
TYPE A
34343
TYPE B
48565
TYPE C
79787
USER
00000
OFF
Initial settings of preset CS-A mode
EN_KD-HDR1[J].indb 16EN_KD-HDR1[J].indb 16 06.1.23 10:07:10 AM06.1.23 10:07:10 AM
17
ENGLISH
General settings — PSM
You can change PSM (Preferred Setting Mode)
items (except “SID”) listed in the table that
follows.
1
2 Select a PSM item.
Indications Selectable settings, [reference page]
DEMO
Display
demonstration
DEMO ON : [Initial]; Display demonstration will be activated
automatically, [7].
DEMO OFF : Cancels.
CLOCK H
Hour adjustment
1 – 12, [7]
[Initial: 1 (1:00)]
CLOCK M
Minute adjustment
00 – 59, [7]
[Initial: 00 (1:00)]
CLK ADJ*
1
Clock adjustment
AUTO : [Initial]; The built-in clock is automatically adjusted using
the clock data provided via the satellite radio channel.
OFF : Cancels.
T-ZONE*
1
, *
2
Time zone
Select your residential area from one of the following time zones for clock
adjustment.
EASTERN [Initial] ATLANTIC NEWFOUND ALASKA
PACIFIC MOUNTAIN CENTRAL (back to the beginning)
DST*
1
, *
2
Daylight savings time
Activate this if your residential area is subject to DST.
ON : [Initial]; Activates daylight savings time.
OFF : Cancels.
SID*
3
SIRIUS ID
The 12-digit SIRIUS identification number scrolls on the display 5 seconds
after “SID” is selected, [19].
Press SEL to resume the previous display.
DIMMER
Dimmer mode
ON : Dims the display illumination of this unit.
OFF : Cancels.
AUTO : [Initial]; Dims the display when you turn on the headlights.
*
1
Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected.
*
2
Displayed only when “CLK ADJ” is set to “AUTO.”
*
3
Displayed only when SIRIUS Satellite radio is connected.
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other
PSM items if necessary.
5 Finish the procedure.
Ex.: When “DIMMER” is selected
To be continued...
EN_KD-HDR1[J].indb 17EN_KD-HDR1[J].indb 17 06.1.23 10:07:10 AM06.1.23 10:07:10 AM
18
ENGLISH
Indications Selectable settings, [reference page]
SCROLL*
1
Scroll mode
ONCE : [Initial]; Scrolls the information once.
AUTO : Repeats scrolling (5-second intervals in between).
OFF : Cancels.
Pressing DISP for more than one second can scroll the display regardless
of the setting.
WOOFER
Subwoofer cutoff
frequency
LOW : Frequencies lower than 90 Hz are sent to the subwoofer.
MID : [Initial]; Frequencies lower than 135 Hz are sent to the
subwoofer.
HIGH : Frequencies lower than 180 Hz are sent to the subwoofer.
EXT IN*
2
External input
CHANGER : [Initial]; To use a JVC CD changer, [11], a JVC
compatible satellite (SIRIUS/XM) tuner, [19], an Apple
iPod or a JVC D. player, [22].
EXT IN : To use any other external component than the above, [24].
TAG DISP
Tag display
TAG ON : [Initial]; Shows the Tag information while playing MP3/
WMA tracks, [13].
TAG OFF : Cancels.
BEEP
Key-touch tone
ON : [Initial]; Activates the key-touch tone.
OFF : Cancels.
AMP GAIN
Amplifier gain
control
You can change the maximum volume level of this unit.
LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 50 W to prevent them from
damaging the speaker.)
HIGH PWR : [Initial]; VOL 00 – VOL 50
OFF : Deactivates the built-in amplifier.
AREA
Tuner channel
interval
AREA US : [Initial]; When using the unit in North/Central/South
America. AM/FM intervals are set to 10 kHz/200 kHz.
AREA SA : When using the unit in South American countries where
FM interval is 100 kHz. AM interval is set to 10 kHz.
AREA EU : When using the unit in any other areas. AM/FM intervals
are set to 9 kHz/50 kHz (100 kHz during auto search).
S MODE
Radio station
search mode
You can change radio station search mode operation using the
4
/¢ buttons.
MANUAL : [Initial]; To search for a station manually—for Manual
search, [9].
HD SEEK :
To search for an HD Radio station only—for HD search, [9].
IF BAND
Intermediate
frequency band
AUTO :
[Initial]; Increases the tuner selectivity to reduce interference
noises between the stations. (Stereo effect will be lost.)
WIDE : Subject to the interference noises from adjacent stations,
but sound quality will not be degraded. (Stereo effect will
not be lost.)
CS ON HD
CS-A mode standby
on HD Radio
AUTO : Automatically activates “USER” for the CS-A mode when
the CS-A mode is set to “OFF”, and the unit receiving a
radio broadcast encoded with CS II.
OFF : [Initial]; Cancels.
*
1
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
2
Displayed only when one of the following sources is selected—FM, AM, or DISC.
EN_KD-HDR1[J].indb 18EN_KD-HDR1[J].indb 18 06.1.23 10:07:12 AM06.1.23 10:07:12 AM
ENGLISH
19
Satellite radio operations
This unit is satellite (SAT) Radio Ready—
compatible with both SIRIUS Satellite radio and
XM Satellite radio.
Before operating your satellite radio:
For connection, see Installation/Connection
Manual (separate volume).
Refer also to the Instructions supplied with
your SIRIUS Satellite radio or XM Satellite
radio.
“SIRIUS” and the SIRIUS dog logo are
registered trademarks of SIRIUS Satellite Radio
Inc.
XM and its corresponding logos are registered
trademarks of XM Satellite Radio Inc.
“SAT Radio,” the SAT Radio logo and all
related marks are trademarks of SIRIUS
Satellite Radio Inc., and XM Satellite Radio,
Inc.
Listening to the satellite radio
Connect either one of the following (separately
purchased) to the CD changer jack on the rear
of this unit.
JVC SIRIUS radio DLP—Down Link
Processor, for listening to the SIRIUS Satellite
radio.
XMDirect
TM
Universal Tuner Box using a
JVC Smart Digital Adapter—XMDJVC100
(not supplied), for listening to the XM
Satellite radio.
GCI (Global Control Information) update:
If channels are updated after subscription,
updating starts automatically.
“UPDATING” flashes and no sound can be
heard.
Update takes a few minutes to complete.
During update, you cannot operate your
satellite radio.
To be continued...
Activate your SIRIUS subscription after
connection:
1
2
JVC DLP starts updating all the SIRIUS
channels.
Once completed, JVC DLP tunes in to the
preset channel, CH184.
3 Check your SIRIUS ID, see page 17.
4 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can
call SIRIUS toll-free at 1-888-539-
SIRIUS (7474).
“SUB UPDT PRESS ANY KEY” scrolls
on the display once subscription has been
completed.
Activate your XM subscription after
connection:
Only Channel 0, 1, and 247 are available
before activation.
1
2
XMDirect
TM
Universal Tuner Box starts
updating all the XM channels. “Channel 1”
is tuned in automatically.
3 Check your XM Satellite radio
ID labeled on the casing of the
XMDirect
TM
Universal Tuner Box, or
tune in to “Channel 0” (see page 21).
EN_KD-HDR1[J].indb 19EN_KD-HDR1[J].indb 19 06.1.23 10:07:13 AM06.1.23 10:07:13 AM
20
ENGLISH
Listening to the XM Satellite radio
1
2
3 Select a channel for listening.
Holding the button changes the channels
rapidly.
Searching for category/channel
You can search for programs by category
(Category Search) or channel number (Channel
Search).
In Category Search, you can tune in to the
channels of the selected category. Category
Search begins from the currently selected
channel. The selected channel number flashes
on the display.
In Channel Search, you can tune in to
all channels (including non-categorized
channels).
1 Select a category (Category Search).
For Channel Search, skip
this step.
4
Contact XM Satellite radio on
the internet at <http://xmradio.
com/activation/> to activate your
subscription, or you can call 1-800-
XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one
of the available channels (Channel 4 or
higher).
Listening to the SIRIUS Satellite radio
1
2
3 Select a category.
You can tune in to all the channels of every
category by selecting “ALL.”
Selecting a particular category (SPORTS,
ENTERTAINMENT, etc.) allows you to
enjoy only the channels from the selected
category.
4 Select a channel for listening.
Holding the button changes the channels
rapidly.
When changing the category or channel,
invalid and unsubscribed channels are
skipped.
EN_KD-HDR1[J].indb 20EN_KD-HDR1[J].indb 20 06.1.23 10:07:14 AM06.1.23 10:07:14 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

JVC KD-HDW10J Manuel utilisateur

Catégorie
Récepteurs multimédia de voiture
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues