Dyna-Glo DGSS1382VCS-D Manuel utilisateur

Marque: Dyna-Glo

Modèle: DGSS1382VCS-D

Catégorie: Cheminées

Taper: Manuel utilisateur

Ce manuel convient également à

Heavy-Duty

Charcoal Offset

Vertical Smoker

& Grill

MODEL #DGSS1382VCS /

DGSS1382VCS-D

Français p. 26

Español p. 51

ATTACH YOUR RECEIPT HERE

Serial Number ________________________________ Purchase Date _________________________________

70-10-583 Rev. 9/21/16

Questions, problems, missing parts? Before returning to your retailer, call our

customer service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m. CST,

Monday – Friday or log on to [email protected].

TABLE OF CONTENTS

Safety Information ...................................................................................................................... 2

Package Contents ...................................................................................................................... 4

Hardware Contents .................................................................................................................... 5

Preparation ................................................................................................................................. 5

Assembly Instructions ................................................................................................................ 6

Operation Instructions ................................................................................................................. 18

Tips On Smoking ......................................................................................................................... 20

Care and Maintenance ................................................................................................................ 22

Warranty ...................................................................................................................................... 23

Replacement Parts List .............................................................................................................. 24

Please read and understand this entire manual before attempting to assemble, operate or

install the product. If you have any questions regarding the product, call our customer service

department at 1-877-447-4768, 8:30 a.m.- 4:30 p.m. CST, Monday - Friday or log on to

[email protected].

Use caution when lifting and moving the unit to avoid back strain or back injury. Do not move

the unit while it is in use.

• DO NOT operate the unit near or under ammable or combustible materials such as decks,

porches or carports.

• A minimum clearance to combustible construction is 36 in. (91.4 cm) from sides and back.

• DO NOT operate the unit under overhead construction.

• DO NOT use this smoker and grill as a heater.

• Operate the unit on a stable, level, noncombustible surface such as asphalt, concrete or

solid ground.

• DO NOT operate the unit on ammable material such as carpet or wood deck.

• Use caution when assembling and operating this unit to avoid cuts and scrapes from edges.

SAFETY INFORMATION

• DO NOT use this product in a manner other than its intended purpose. It is NOT intended for

commercial use. It is NOT intended to be installed or used in or on a recreational vehicle

and/or boats.

• DO NOT store this unit near gasoline or other combustible liquids or where other combustible

vapors may be present.

• DO NOT use or store or operate this unit in an area accessible to children or pets. Store this

unit in a dry protected location.

• DO NOT leave the unit unattended while in use.

• DO NOT leave hot ashes unattended, until the unit cools completely.

• DO NOT move the unit while in use, or while ashes are still hot. Allow the unit to cool completely

before moving or storing.

• NEVER use gasoline, kerosene, Zippo/Ronson lighter uid, or other highly volatile uids as a starter.

• Always cook your food on the grate after the ame is burned out.

• Dispose of cold ashes by wrapping them in heavy-duty aluminum foil and placing in a

noncombustible container. Make sure that there are no other combustible materials in or near

the container.

• If you must dispose of ashes in less time than it takes for the ashes to completely cool down,

remove the ashes from the unit using heat-resistant gloves along with long metal tongs or

replace shovel. Place the coals in aluminum foil and soak them completely with water before

disposing of them in a noncombustible container.

• Allow the unit to cool completely before conducting any routine cleaning or maintenance.

• This product will be hot during and after use. Use insulated oven mitts, or gloves, for protection

from hot surfaces or splatter from cooking liquids.

• Use caution when opening the primary door and offset lid of the unit while in operation. Keep

hands, face and body safe from hot steam or are-ups. DO NOT inhale smoke.

• DO NOT wear loose clothing while operating the unit. Tie back long hair while operating the unit.

• ALWAYS wear shoes that fully cover your feet while operating the unit.

• NEVER use glassware, plastic or ceramic cookware on or in the unit. Use metallic cookware only.

• Use of accessories not intended for this unit is not recommended and may lead to injury or

property damage.

• Read and follow all warnings and instructions before assembling and using the smoker and grill.

CALIFORNIA PROPOSITION 65

Fuels used in wood and charcoal burning appliances and the products of combustion of such

fuels contain chemicals known to the State of California to cause cancer, birth defects or other

reproductive harm. This product contains chemicals, including lead and lead compounds, known to

the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after

handling.

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Smoker body 1

B Temperature gauge with nut 1

C Sausage hooks 1

D Side access door 1

E Cooking grate - smoker

body 5

F Side handle - smoker body 1

G Water bowl support 1

H Wheel - left / right 2

I Left leg assembly 1

J Water bowl 1

K Grease cup support 1

L Grease cup 1

M Right leg - front / rear 2

N Wheel axle 1

PART DESCRIPTION QUANTITY

O Offset damper plate 1

P Offset coupling bracket 2

Q Charcoal grate 1

R Cooking grate - offset 2

S Side handle - access tray 1

T Access tray 1

U Offset bottom section 1

V Offset lid handle 1

W Offset top section 1

X Offset lid 1

Y Offset lid bracket 1

Z Smoke stack 1

A1 Smoke stack damper 1

B1 Door handle assembly 1

C1 Offset rebox coupling 1

HARDWARE CONTENTS

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents above. If any part is missing or damaged, do

not attempt to assemble the product. Contact customer service for replacement parts.

Estimated Assembly Time: 30 minutes

Tools Required for Assembly (not included): Phillips Screwdriver, Adjustable Wrench

M6 x 12

Bolt

Qty. 33

M6 x 45

Bolt

Qty. 3

M6 Nut

Qty. 9

M6 x 30

Bolt

Qty. 4

M12 Nut

Qty. 2

M6 Lock Nut

Qty. 1

ASSEMBLY INSTRUCTIONS

CAUTION: This unit is HEAVY! Do not attempt to

stand the unit upright without assistance!

1. Remove the preinstalled bolt and washer from

the bottom door hinge on the smoker body (A).

Unlatch the smoker door and remove the door by

pulling up from hinges on smoker body (A).

2. Attach the side handle (F) using four M6 x 30 bolts

(AA) and four M6 nuts (DD).

Hardware Used

M6 x 30mm

Bolt

x 4

Preinstalled

bolt and

washer

M6 Nut

x 4

ASSEMBLY INSTRUCTIONS

3. CAUTION: This unit is HEAVY! Do not

attempt to lay the unit on its side without

assistance!

Attach the right front and right rear legs (M) using

three M6 x 12 bolts (BB) per leg. Attach the left leg

assembly (I) using three M6 x 45 bolts (CC).

4. Insert the wheel axle (N) through the holes on the

left leg assembly (I) and attach the left and right

wheel (H) using one M12 nut (EE) per side.

Hardware Used

M6 x 45mm

Bolt

x 3

Hardware Used

M12 Nut

x 2

M6 x 12mm

Bolt

x 6

ASSEMBLY INSTRUCTIONS

5. Insert the edge of the offset lid bracket (Y) into

the slotted opening on the offset top section (W).

Attach using one M6 x 12 bolt (BB) and one

M6 nut (DD).

6. Attach the offset bottom section (U) to the top

section (W) using six M6 x 12 bolts (BB).

Hardware Used

M6 x 12mm

Bolt

x 1

M6 Nut

x 1

Hardware Used

M6 x 12mm

Bolt

x 6

ASSEMBLY INSTRUCTIONS

7. Insert the offset rebox coupling (C1) through the

opening on the top section of the offset (W) and

attach with four M6 x 12 bolts (BB).

8. Attach the offset coupling brackets (P) using four

M6 x 12 bolts (BB).

Hardware Used

M6 x 12mm

Bolt

x 4

Hardware Used

M6 x 12mm

Bolt

x 4

ASSEMBLY INSTRUCTIONS

9. CAUTION: This unit is HEAVY! Do not

attempt to stand the unit upright without

assistance!

Attach the offset rebox to the smoker body (A)

using four M6 x 12 bolts (BB).

10. Attach the preinstalled offset support bracket

on the left leg assembly (I) to the bottom section

of the offset (U) using two M6 x 12 bolts (BB) and

two M6 nuts (DD).

Hardware Used

M6 x 12mm

Bolt

x 4

Hardware Used

M6 x 12mm

Bolt

x 2

M6 Nut

x 2

ASSEMBLY INSTRUCTIONS

11. Rest the inner ring of the sausage hooks (C) on

the bottom brackets of the smoke stack (Z). Insert

the smoke stack (Z) up through the opening at the

top of the smoker body (A) and secure with three

M6 x 12 bolts (BB).

12. Attach the smoke stack damper (A1) using the

preinstalled spring and nut.

Hardware Used

M6 x 12mm

Bolt

x 3

ASSEMBLY INSTRUCTIONS

13. Hang the grease cup support (K) from the holes

on each of the right legs (M).

Place the grease cup (L) in the support (K).

14. Install the smoker body door and reattach the

preinstalled bolt and washer.

ASSEMBLY INSTRUCTIONS

15. Attach the door handle assembly (B1) using the

pre-installed at washer, spring washer

and M8 nut.

16. Attach the temperature gauge (B) by inserting the

probe through the threaded opening on the smoker

body door and turning clockwise.

NOTE: The alignment of the temperature gauge

can be adjusted by turning the preinstalled nut

clockwise (or counter-clockwise) prior to installing.

ASSEMBLY INSTRUCTIONS

17. Attach the offset lid handle (V) to the offset lid (X)

using the preinstalled bolts and nuts.

18. Attach the offset lid (X) to the offset rebox using

the preinstalled bolt and washer.

Preinstalled bolt

and washer

ASSEMBLY INSTRUCTIONS

19. Install the side access door (D) onto the

smoker body (A).

20. Attach the side handle (S) to the access tray (T)

using two M6 x 12 bolts (BB) and two M6 nuts (DD).

Hardware Used

M6 x 12mm

Bolt

x 2

M6 Nut

x 2

ASSEMBLY INSTRUCTIONS

21. Attach the offset damper plate (O) to the access

tray (T) using one M6 x 12 bolt (BB) and one

M6 lock nut (FF).

22. Place the charcoal grate (Q) inside the access

tray (T) and slide the tray into the offset smoker box.

Hardware Used

M6 x 12mm

Bolt

x 1

M6 Lock Nut

x 1

ASSEMBLY INSTRUCTIONS

23. Installing the Cooking Grates & Water Bowl

Install the offset cooking grates (R) into the offset

rebox. Place the water bowl support (G) on the

bottom bracket inside the smoker body (A) and

place the water bowl (J) on the water bowl

support (G). Place the cooking grates (E) on the

brackets inside the smoker body (A).

Tip: Place all 5 cooking grates (E) inside the

smoker body (A) and start from bottom

grate supports.

OPERATING INSTRUCTIONS

BEFORE FIRST USE

Remove all hangings or plastic straps, if present.

It is important to "season" the smoker & grill, before cooking food. Seasoning seals the paint and

interior to enhance avoring, durability and overall performance.

To season your smoker and grill, simply use it as you normally would without adding food.. You will

need to follow all of the lighting and operating procedures in the next few sections of this manual.

Using your desired avoring woods and marinades, burn your smoker at low temperature

(around 175°F/79.4°C) for 45 – 60 minutes. Let the smoker cool and clean out the wood chips and charcoal.

Once seasoning is complete, the smoker body and offset interior will have a durable, seasoned coating.

Lighting Instructions (For Smoking or Charcoal Grilling)

DO NOT USE PRETREATED, MATCH-LIGHT CHARCOAL with this smoker. Only use standard,

untreated briquettes or lump charcoal and ONLY use charcoal lighting uid approved for lighting charcoal.

Do not use lighter uid, paint thinners, gasoline, kerosene, alcohol or other ammable material for

lighting charcoal. Damage to the unit may occur with the use of match-light charcoal.

Start with at least 4 lbs. (1.8 kgs.) of charcoal (75 standard briquettes).

Make adjustments as needed when cooking in colder climates or during high winds, and/or when fair

amounts of precipitation are present.

Step 1

Note: Please refer to the manufacturer’s recommended amount of charcoal lighter uid before

applying uid to the briquettes. Charcoal can be added to the offset rebox by removing the offset

cooking grates or pulling out the side access tray. Pile the charcoal towards the middle of the offset

charcoal grate. Briquettes should be packed closely together for maximum burn efciency. Saturate

charcoal with the amount of charcoal lighter uid as recommended by the charcoal lighter uid

manufacturer. After soaking the charcoal, place the charcoal lighter uid at a safe distance away from

the smoker. Allow the charcoal lighter uid to soak into the charcoal for 3 minutes before lighting.

Step 2

With primary rebox door and offset lid open,, stand back and carefully light charcoal and allow to

burn until covered with a light ash (approximately 20 minutes). Charcoal lighter uid must be allowed

to completely burn off prior to closing the primary rebox door and offset lid. (Fumes will tend to

collect in both reboxes, when the primary door and offset lid are closed).

OPERATING INSTRUCTIONS

Lighting Instructions (Continued)

Step 3

After 20-25 minutes, charcoal should be ready for cooking and/or adding woodchips. Refer to the

next section before adding wood chips to pre-lit charcoal.

DANGER: Closing the smoker body door and offset lid during the lighting procedure could

trap fumes from the charcoal lighting uid in the smoker boxes and may result in a ash-

re or explosion when door is opened, resulting in property loss, personal injury or death.

Never attempt to add more lighting uid to the charcoal once it has been lit.

ADDING WOOD CHIPS (BEFORE AND DURING COOKING)

WARNING: Use caution since ames can are-up when fresh air suddenly comes in contact

with re. When opening the door, keep hands, face and body a safe distance from hot steam

and ame are-ups.

Presoaked Wood Chips

Soak the desired amount of chips in water for 30 minutes. Wrap the wood chips in aluminum foil

and poke holes on the top of the foil wrapping. FOLLOW THE STEPS BELOW BEFORE ADDING

PRESOAKED WOOD CHIPS.

Dry Wood Chips

Dry wood chips can be placed directly onto the pre-lit charcoal with or without aluminum foil.

FOLLOW THE STEPS BELOW BEFORE ADDING DRY WOOD CHIPS.

The amount and type of wood used is entirely dependent on the desired amount of avor. Refer to

the chart on the next page for tips on paring wood chips with various food types.

Step 1

Stand back and carefully open the offset lid allowing heat and steam to escape away from your face.

Use caution since ames can are-up when fresh air suddenly comes in contact with re. Wood can

be added by either removing the cooking grates with ame retardant oven mitts/gloves OR using the

side pull out tray.

Step 2

Wearing ame retardant oven mitts/gloves, use long metal cooking tongs to lightly brush aside ashes

on hot coals. Use the long metal cooking tongs to add wood chips (and/or charcoal) to directly onto

the charcoal, being careful not to stir-up ashes and sparks.

WARNING: Never add charcoal lighting uid to hot or even warm coals as ashback may

occur causing severe burns.

Step 3

Allow the ashes to completely cool before reusing or cleaning the smoker.

• Small wood chips work best inside the wood chip tray.

• Use dry hardwoods such as hickory, pecan, apple, cherry or mesquite.

• To produce more smoke and prevent fast burning, pre-soak the wood chips in a separate bowl

of water for at least 30 minutes, or wrap the chips in perforated aluminum foil.

• Most smoke avoring occurs within the rst hour of cooking. Adding wood chips after the rst

hour is typically not necessary unless extra smoke avoring is desired.

Here's a list of the most popular smoking woods and a little information about each.

Type of Wood Suggested Food Comments

Apple All meats

Mild and sweet avor with a slight hint of fruity avor. Each

species of Apple wood should offer a slightly different avor.

Apple smoke produces an attractive browning effect.

Almond All meats Produces a sweet smoke with a natural nutty avor.

Ash Fish and red meat Very light avor.

Citrus Pork and chicken Lemon and orange wood produce light but fruity avor.

Cherry Pork and beef Light and fruity avor.

Fruitwood Pork, poultry and sh

Wood such as Peach, Pear and Plum produce a mild but sweet

smoke with a hint of fruity avor.

Grapevine Poultry, game and lamb

Grapevine wood produces a lot of smoke. A little wood goes a

long way. It produces a tart avor that has a hint of fruit.

Hickory Pork and beef

Hickory is arguably the favorite wood for smoking. Hickory

produces a very strong avor so we recommend starting slow

with this wood.

Maple Pork and poultry Light and sweet.

Mesquite Beef, chicken and sh

This wood burns very hot so be aware. Much like Hickory,

Mesquite is very popular and produces a strong avor.

Oak Red meats, game, ribs and sh

Another wood that produces a heavy smoke. Start slow with this

wood.

Pecan Ribs and red meat Produces a light smoke that offers a sweet and nutty avor.

La page charge ...

Dyna-Glo DGSS1382VCS-D Manuel utilisateur

Marque: Dyna-Glo

Modèle: DGSS1382VCS-D

Catégorie: Cheminées

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

español: Dyna-Glo DGSS1382VCS-D Manual de usuario

Dyna-Glo DGSS1382VCS-D Manuel utilisateur

Ce manuel convient également à

Dyna-Glo DGSS1382VCS-D Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents