Olympus C725 Ultra Zoom Manuel utilisateur

ENGLISH ..............2

FRANÇAIS ..........44

DEUTSCH............86

ESPAÑOL..........128

DIGITAL CAMERA

APPAREIL PHOTO NUMÉRIQUE

DIGITALKAMERA

CÁMARA DIGITAL

C-725 Ultra Zoom

BASIC MANUAL

MANUEL DE BASE

EINFACHE ANLEITUNG

MANUAL BÁSICO

1 C725UZBasic-E1 04.2.19 1:41 PM Page 1

En

NAMES OF PARTS 4

HOW TO USE THIS MANUAL 11

GETTING STARTED 12

USING THE MENU 16

SHOOTING BASICS 21

ADVANCED SHOOTING 28

PLAYBACK 30

PRINT SETTINGS 35

TRANSFERRING PICTURES TO A COMPUTER 36

ERROR CODES 39

SPECIFICATIONS 41

CONTENTS

2

Thank you for purchasing an Olympus digital camera. Before you start to use

your new camera, please read these instructions carefully to enjoy optimum

performance and a longer service life. Keep this manual in a safe place for

future reference.

These instructions are only for quick reference. For more details

on the camera functions described in this manual, refer to the

camera Reference Manual on the CD-ROM enclosed in the camera

package.

1 C725UZBasic-E1 04.2.19 1:41 PM Page 2

3

En

For customers in USA

Declaration of Conformity

Model Number : C-725 Ultra Zoom

Trade Name : OLYMPUS

Responsible Party : Olympus America Inc.

Address : 2 Corporate Center Drive, Melville, New York

11747-3157 U.S.A.

Telephone Number : 1-631-844-5000

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC rules. Operation is subject

to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

For customers in Europe

“CE” mark indicates that this product complies with the European

requirements for safety, health, environment and customer

protection. “CE” mark cameras are intended for sales in Europe.

For customers in North and South America

Trademarks

•IBM is a registered trademark of International Business Machines

Corporation.

•Microsoft and Windows are registered trademarks of Microsoft Corporation.

•Macintosh is a trademark of Apple Computer Inc.

•All other company and product names are registered trademarks and/or

trademarks of their respective owners.

•The standards for camera file systems referred to in this manual are the

“Design Rule for Camera File System/DCF” standards stipulated by the

Japan Electronics and Information Technology Industries Association

(JEITA).

 Before using your camera, read this manual carefully to ensure correct use.

 We recommend that you take test shots to get accustomed to your camera before taking

important photographs.

 These instructions are only for quick reference. For more details on the functions

described here, refer to the Reference Manual on the CD-ROM.

For more details on connecting the camera to a PC and installing the provided software,

refer to the “Software Installation Guide” (included in the CD-ROM package).

1 C725UZBasic-E1 04.2.19 1:41 PM Page 3

4

En

NAMES OF PARTS

Camera

Mode dial ( ,

,

P/A/S/M, , , , , )

Shutter button

Flash switch ( )

Macro/Spot button ( )

Print button ( )

DRIVE button

Erase button ( )

Flash mode button ( / )

Protect button ( )

Diopter adjustment dial

Viewfinder

Card access lamp

Monitor

POWER switch

Arrow pad

(

ÑñÉí)

AE lock button

Custom button

()

Rotation button

()

OK/Menu button ( )

Monitor button ( )

Zoom lever (W/T, / )

1 C725UZBasic-E1 04.2.19 1:41 PM Page 4

5

En

Flash

Self-timer lamp

Card cover

Strap eyelet

Lens

VIDEO OUT jack

Connector cover

USB connector

DC-IN jack

Battery compartment cover

Battery

compartment

lock

Tripod socket

1 C725UZBasic-E1 04.2.19 1:41 PM Page 5

6

En

NAMES OF PARTS (Cont.)

Viewfinder/Monitor indications — Shooting information

The INFO setting on the menu allows you to select how much information to

display.

The indications vary depending on the shooting mode.*

*The illustrations show examples of

indications displayed in the P mode.

When INFO is set to OFF: The

information below is displayed

constantly in the shooting mode.

(After closing the menu, the

information which appears in the ON

mode (illustrated to the right) is

displayed for approx. 3 seconds,

then disappears.)

When INFO is set to ON: The

information below is displayed

constantly in the shooting mode.

Items Indications

1 Shooting mode , P, A, S, M, , , , ,

2 Aperture value F2.8 – F7.1

3 Shutter speed 8 – 1/1000

4 Exposurecompensation –2.0 – +2.0

Exposure differential –3.0 – +3.0

5 AF target mark [ ]

6 Number of storable still 24

pictures

Seconds remaining 24"

5

6

7

12 3 4

8

$

!

0

@

#

%

^

&

ISO 100

9

1 C725UZBasic-E1 04.2.19 1:41 PM Page 6

7

En

Control panel indications

Items Indications

7 Record mode TIFF, SHQ, HQ, SQ1, SQ2

8 Memory gauge

9 Battery check

0 AE lock AEL

! Drive mode , , , BKT

@ White balance , , ,

# ISO ISO100, ISO200, ISO400

$ Green lamp O

% Flash stand-by Lights.

Camera movement Blinks.

warning

Flash charge Blinks.

^ Flash mode , , , ,

& Spot metering/ , ,

Macro mode

5

6

7

12 3 4

8

$

!

0

@

#

%

^

&

ISO 100

9

1 C725UZBasic-E1 04.2.19 1:41 PM Page 7

8

En

NAMES OF PARTS (Cont.)

Viewfinder/Monitor indications — Playback information

INFO setting on the menu allows you to select how much information to

display.

Still picture playback information

Items Indications

1 Battery check

2 Print reserve

3 Number of prints x2 – x10

4 Protect

5 Record mode TIFF, SHQ, HQ, SQ1, SQ2

6 Date ’04. 04. 01

7 Time 12:30

8 Frame number 56

9 File number 100 – 0056

0 Number of pixels 1984x1488, 1600x1200, 1280x960,

(resolution setting) 1024x768, 640x480

! Aperture value F2.8 – F7.1

@ Shutter speed 8 – 1/1000

# Exposure compensation –2.0 – +2.0

$ White balance , , ,

% ISO ISO100, ISO200, ISO400

When INFO is set to OFF

When INFO is set to ON

100-0056 HQ

’04.04.01 12:30

56

9

1234

6

5

7

8

100-0056 HQ

SIZE: 1984x1488

F2.8 1/800 +2.0

ISO100

’04.04.01 12:30

56

0

!

@

#

$

%

8

1 C725UZBasic-E1 04.2.19 1:41 PM Page 8

9

En

● The indications that appear on a movie picture that has been selected and

displayed from the thumbnail display are different from those that appear

when the movie picture is displayed using the movie play function.

Note

Movie playback information

Items Indications

1 Battery check

2 Movie mark

3 Protect

4 Date ’04. 04. 01

5 Time 12:30

6 Movie playback time During movie playback, the recording time

appears as follows:

7 File number 100 – 0020

8 Record mode HQ, SQ

9 Number of pixels 320 x 240, 160 x 120

0 White balance , , ,

Overall recording

time

0" / 30"

Elapsed

playback time

When INFO is set to OFF

When INFO is set to ON

’04.04.01 12:30

0"/30"

100-0020

100-0020 HQ

SIZE: 320x240

’04.04.01 12:30

0"/30"

0

8

9

1 C725UZBasic-E1 04.2.19 1:41 PM Page 9

10

En

NAMES OF PARTS (Cont.)

Viewfinder/Monitor indications — Memory gauge & battery check

If the remaining battery power is low, the battery check indication changes as

follows when the camera is turned on or while the camera is in use.

Battery check

Memory gauge

When taking still pictures

Before shooting

(Gauge is off)

One picture

taken

(Lit)

No more pictures

can be taken

(Fully Lit)

Shoot. Shoot. Shoot.

Wait.Wait.

Wait.

When recording movies

During shooting (Gauge lit).

● Shooting is not possible until the light goes out completely.

● Movie recording finishes automatically when the memory

gauge is fully lit.

Shoot.

If you continue shooting

Wait.

Before shooting

(Gauge is off)

The memory gauge lights when you take a picture. When the gauge is lit, the

camera is storing a picture on the xD-Picture Card. The memory gauge

indication changes as shown below depending on the shooting status. When

the memory gauge is full, wait until the light goes out before you take any

more shots.

Lights.

(green)

Remaining power

level: high

Lights.

(red)

Remaining power level:

low. Replace with a new

battery.

BATTERY EMPTY is displayed.

The card access lamp and self-

timer lamp blink.

Remaining power level: exhausted.

Replace with a new battery.

1 C725UZBasic-E1 04.2.19 1:41 PM Page 10

The instructions in this manual use a series of numbers for each operating

procedure and button/dial illustration. Follow these numbers in order when

operating the camera.

If a button is shown in black, press it as part of the step.

Before using the following function, set the mode dial to any of the positions

shown.

Means “Press this button”.

Ñ, ñ, É and í used in instructions correspond to

the buttons on the arrow pad as shown.

Ñ

ñ

É

í

Set the functions in the menus in the order of these arrows. Before using

the menus, read “Using the Menus”, for details

.

In the top menu, select MODE MENU T CAMERA T P/A/S/M T M.

Mode dial

setting

11

En

HOW TO USE THIS MANUAL

1 C725UZBasic-E1 04.2.19 1:42 PM Page 11

En

12

GETTING STARTED

Attaching the strap

1

2

3

4

Pull out the end of the

strap from the ring

attached to the strap.

Pull the end of the strap

to remove it from the

stopper and adjust the

strap length.

When you have a length

that you like, thread the

end of the strap through

the stopper. Thread the

end of the strap through

the ring while pulling on

the strap to keep it from

loosening.

● Be careful with the strap when you carry the camera, as the strap can easily

catch on stray objects, causing serious damage.

● Attach the strap correctly as shown so that the camera does not fall off. If

the strap is attached incorrectly and the camera falls off the strap, Olympus

is not responsible for any damages.

Note

Stopper

Ring

Stopper

Camera strap

eyelet

5

6

1 C725UZBasic-E1 04.2.19 1:42 PM Page 12

En

13

Loading the batteries

1

Make sure the camera is turned

off;

● The monitor is off.

● The viewfinder is off.

● The lens is not extended.

2

3

Slide the battery compartment

cover in the direction of the

arrow (

A

) with your fingertip

and open it (

B

).

● Do not use your fingernail, as

this could result in injury.

4

5

Close the battery compartment

cover, then press it down (

C

)

and slide it in the opposite

direction of the arrow printed

on it (

D

).

● When pressing the battery

compartment cover shut, be

sure to press the center of the

cover, as it may be difficult to

close properly by pressing the

edge.

● Make sure the cover is

completely closed.

6

This camera uses 2 CR-V3 lithium battery packs or 4 AA (R6) NiMH batteries,

NiCd batteries, alkaline batteries or lithium batteries.

Important:

● CR-V3 lithium battery packs cannot be re-charged.

● Do not peel the label on a CR-V3 lithium battery pack.

When using

CR-V3 lithium

battery packs

A

B

C

D

 Using an AC power adapter

(optional)

Use an AC adapter designed for

the area where the camera is used.

Consult your nearest Olympus

dealer or Service center for details.

1 C725UZBasic-E1 04.2.19 1:42 PM Page 13

14

GETTING STARTED (Cont.)

En

Inserting a card

“Card” in this manual refers to the xD-Picture Card. The camera uses the

card to record pictures.

1

Make sure the camera is turned off.

● The monitor is off.

● The viewfinder is off.

● The lens is not extended.

2

Open the card cover.

3

Insert the card in the appropriate direction.

● Insert the card while keeping it straight.

● The card will stop with a click when it is

inserted all the way to the end.

● Inserting the card the wrong way or at an

angle could damage the contact area or

cause the card to jam.

● If the card is not inserted all the way, data

may not be written to the card.

4

Close the card cover securely until it

clicks.

Index area side

 Removing the card

1

Push the card all the way in to unlock it,

then let it return slowly.

● The card is ejected a short way and then

stops. Hold the card straight and pull it out.

Releasing your finger quickly after pushing the

card all the way in may cause it to eject

forcefully out of the slot.

Note

1 C725UZBasic-E1 04.2.19 1:42 PM Page 14

15

En

Power on/off

Date/time setting

1 Before turning the camera on, press

the tabs on the lens cap to remove it.

2 Press the power switch to turn on the

camera.

● The lens moves out when the mode

dial is not set to .

● The monitor turns on.

● To turn off the camera, press the power

switch again.

● If the date/time has been returned to

the factory default setting, "Y/M/D"

appears on the monitor

Lens cap

1 Set the mode dial to , then press the POWER switch to turn on

the camera.

2 Press .

● The top menu is displayed.

3 Press Ñ on the arrow pad to select .

4 When is selected on the screen, press Ññ to select the date

format.

● Select any one of the following formats:

D-M-Y (Day/Month/Year)

M-D-Y (Month/Day/Year)

Y-M-D (Year/Month/Day)

● This step and the following steps show the procedure used when the date

and time settings are set to Y-M-D.

5 Press í to move to the year (Y) setting.

6 Press Ññ to set the year. When the year is set, press í to move to

the month (M) setting.

● Repeat this procedure until the date and time are completely set.

● To move back to the previous setting, press

É.

● The first two digits of the year cannot be changed.

7 Press .

● For a more accurate setting, don't press until the clock hits 00 seconds.

The clock starts when you press the button.

8 To turn the camera off, press the POWER switch.

● The lens retracts.

1 C725UZBasic-E1 04.2.19 1:42 PM Page 15

16

GETTING STARTED (Cont.)

En

USING THE MENU

● The current settings stay the same even when the power is turned off,

unless they are readjusted.

● The date setting will be canceled if the camera is left with no batteries for

approximately 1 hour. If this happens, you will need to set the date again.

● The date/time setting may be canceled if the camera has stopped operating

because of a dead battery, etc.

Note

Shortcut menu

The shortcut menu consists of the items

other than MODE MENU on the Top

menu. These can be replaced with your

favorite items, but only when the mode

dial is set to P/A/S/M or . Just

pressing the arrow pad buttons

according to the marks shown next to

each item will lead you directly to their

screens.

WB

ISO

MODE MENU

(ex. P/A/S/M mode

Top menu)

ß

When displaying menus, the first screen that appears on the monitor is called

the top menu. The contents of this menu change depending on the mode. On

the top menu, two types of menus are available: MODE MENU and the other

menus (shortcut menus).

WB

ISO

MODE MENU

(ex. P/A/S/M mode

top menu)

Mode menu

MODE MENU (displayed on the top menu)

contains all the functions that are available

and is divided into four tabs: CAMERA,

PICTURE, CARD, and SETUP. These can

be selected with the tabs on the left of the

screen by using

Ññ.

å

How to Set a Function in MODE MENU

1 On the top menu, enter MODE MENU.

2 Select a tab (CAMERA, PICTURE, CARD, or SETUP) by using Ññ.

Press

í.

3 Select the function you want by using Ññ. Press í.

4 Select your settings by using Ññ. Press .

1 C725UZBasic-E1 04.2.19 1:42 PM Page 16

17

En

Modes & Shortcut Menus

CARD SETUP

top menu

Display Function Setting

Sets the date and time. –

DIGITAL ZOOM The optical zoom can be extended OFF, ON

to a maximum of approx. 24x.

ISO Selects ISO sensitivity (based on AUTO, 100, 200,

normal camera film). 400

Sets the record mode. TIFF, SHQ,

HQ, SQ1, SQ2

CARD SETUP Formats the card. –

WB Sets the appropriate white balance AUTO, , ,

according to the light source. ,

Runs through all saved pictures one –

after another.

MOVIE PLAY Plays back movies. You can also make MOVIE

indexes of still-shots from movies. PLAYBACK,

INDEX

INFO Changes the amount of shooting OFF, ON

information displayed on the

viewfinder/monitor.

For more details on the camera functions described in this manual, refer to

the camera Reference Manual on the CD-ROM enclosed in the camera

package. Some function settings may not be available depending on the

mode. Factory default settings of some functions vary depending on the

mode.

1 C725UZBasic-E1 04.2.19 1:42 PM Page 17

18

USING THE MENU (Cont.)

En

Tabs & MODE MENU functions (shooting)

CAMERA tab

PICSET

CARD

ISO

P/A/S/M

DIGITAL ZOOM

AUTO

P

1.0 x3

OFF

CAMERA

BKT

In the shooting mode, the MODE MENU has 4 tabs. Press Ññ to select a

tab and display the associated menu items.

Display Function Setting

ISO Selects ISO sensitivity (based on normal AUTO, 100, 200,

camera film) from AUTO/100/200/400. 400

P/A/S/M Exposure mode can be selected from P, A, S, M

P ( Program auto), A (Aperture priority auto),

S (Shutter priority auto), or M (Manual mode).

Adjusts the flash intensity for different –2EV to +2EV

shooting conditions.

BKT Sets the conditions for Auto bracketing. ±0.3/±0.7/±1.0,

x3/x5

DIGITAL ZOOM The maximum optical zoom (8x) can be OFF, ON

extended even more by the 3x digital zoom,

making possible up to approx. 24x zoom.

PANORAMA Allows panorama pictures to be taken with –

Olympus CAMEDIA-brand card.

2 IN 1 Combines two pictures taken in succession –

and stores them as a single picture.

CAMERA tab

CARD tab

SETUP tab

PICTURE tab

PICTURE tab (not available in the , , , or mode)

Display Function Setting

Sets the record mode resolution. TIFF, SHQ,

HQ, SQ1, SQ2

WB Sets the appropriate white balance AUTO, , ,

according to the light source. ,

SHARPNESS Adjusts the sharpness of images. HARD, NORMAL,

SOFT

CONTRAST Adjusts the contrast of images. HIGH, NORMAL,

LOW

1 C725UZBasic-E1 04.2.19 1:42 PM Page 18

19

En

CARD tab

Display Function Setting

CARD SETUP Formats cards. –

SETUP tab

Display Function Setting

ALL RESET Selects whether to keep the current camera OFF, ON

settings when you turn off the power.

INFO Changes the amount of shooting information OFF, ON

displayed on the viewfinder/monitor.

Turns off the beep sound (used for warnings, OFF, ON

etc.).

REC VIEW Selects whether to display images while OFF, ON

saving them to a card.

MY MODE Customizes settings, which are activated in CURRENT,

SETUP the mode. RESET, CUSTOM

SLEEP Sets the sleep timer. 30SEC, 1MIN,

3MIN, 5MIN,

10MIN

FILE NAME Chooses how to name files and folders of RESET, AUTO

images to be saved.

PIXEL Checks the CCD and image processing –

MAPPING circuit for errors.

Adjusts the brightness of the –

viewfinder/monitor.

Sets the date and time. –

BATTERY SAVE Enables camera operation with reduced OFF, ON

power consumption.

SHORT CUT Lets you assign frequently-used functions as All functions

shortcut menus on the top menu. included in the

CAMERA &

PICTURE menus

CUSTOM Lets you assign a frequently used function AE LOCK, INFO,

BUTTON to the camera’s custom button. ISO, P/A/S/M,

DIGITAL ZOOM,

, WB

1 C725UZBasic-E1 04.2.19 1:42 PM Page 19

20

USING THE MENU (Cont.)

En

When a still picture is played back, the MODE MENU has 3 tabs. When a

movie is played back, the MODE MENU has 2 tabs. Press

Ññ to select a

tab and display the associated menu items. The EDIT tab is not available

during movie playback.

CARD

SET

CARD SETUP

EDIT

SET

CARD

SEPIA

BLACK&WHITE

During movie playbackDuring still picture playback

EDIT tab

Display Function Setting

BLACK&WHITE Creates black and white pictures. –

SEPIA Creates sepia-toned pictures. –

Makes the file size smaller. 640 x 480,

320 x 240

CARD tab

Display Function Setting

CARD SETUP Formats cards (FORMAT), or erases all –

images in the card (ALL ERASE).

SETUP tab

Display Function Setting

ALL RESET Selects whether to keep the current camera OFF, ON

settings when you turn off the power.

Turns off the beep sound (used for warning, OFF, ON

etc.).

Adjusts the brightness of the –

viewfinder/monitor.

Sets the date and time. –

Selects the number of frames in the index 4, 9, 16

display.

Tabs & MODE MENU functions (Playback)

1 C725UZBasic-E1 04.2.19 1:42 PM Page 20

La page charge ...

Olympus C725 Ultra Zoom Manuel utilisateur

Olympus C725 Ultra Zoom Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents