DREAME T30 Cordless Vacuum Cleaner Manuel utilisateur

Dreame

Cordless Vacuum Cleaner

User Manual

THANK YOU

FOR PURCHASING THIS DREAME

VACUUM CLEANER.

With it you are obtaining a high quality product that is engineered for

optimal performance. If you have any questions on the product, please

contact us: aftersales@dreame.tech.

Registration Quick Start

Welcome to register a Dreame account

by scanning the QR code.

You are available for the User Manual

and Special O󼴨ers.

User Manual

Benutzerhandbuch

Manuel d'utilisation

Manuale utente

Manual de usuario

Руководство пользователя

1

27

55

83

111

139

167

192

EN

IT

DE

ES

SA

FR

RU

HE





1

Safety Instructions

Warning

• This product can be used by children aged from 8 years and above and persons

with physical, sensory, intellectual de󼴩ciencies, or limited experience or knowledge

under the supervision of a parent or guardian to ensure safe operation and to

avoid any risk of hazards. Cleaning and maintenance shall not be made by children

without supervision.

• The vacuum is not a toy. Children shall not play with or operate this product. Please

exercise caution when using the vacuum near children. Do not allow children to

clean or maintain the vacuum unless supervised by a parent or guardian.

• Do not use the vacuum outdoors or on wet surfaces. Only use the vacuum on dry

indoor surfaces. Do not touch the plug or any part of the vacuum with wet hands.

• To reduce the risk of 󼴩re, explosion, or injury, check to make sure the lithium battery

and charging adapter are undamaged before use. Do not use the vacuum if either

the lithium battery or charger is damaged.

• The smart multi-brush bar, mini electric brush, battery, carbon 󼴩ber rod, and

vacuum are electrically conductive and should not be immersed in water or other

liquid. Make sure to dry all 󼴩lters after cleaning.

• Prevent injury caused by moving parts. Turn o󼴨 the vacuum before cleaning the

smart multi-brush bar. The smart multi-brush bar, dust cup and 󼴩lter must all be

properly installed before using the vacuum.

• Only use the original charging adapter. Never use an unoriginal adapter, as this may

cause the lithium battery to catch 󼴩re.

• Do not use the vacuum to pick up 󼴪ammable or combustible liquids, such as

gasoline, or bleach, ammonia, drain cleaners or other liquids.

• Do not use the vacuum to pick up sharp or hard objects, such as glass, nails, screws,

or coins, which may damage the machine. Do not use the vacuum to pick up drywall

particles, ashes like 󼴩replace ash, or smoking or burning materials such as coal,

cigarette butts, or matches.

• Check the area to be cleaned before use. To prevent the openings from being

blocked, clear the larger paper, spitball, plastic cloth or sharp objects (such as glass,

nails, screws, coins, etc.) and any object which is larger than openings.

• Keep hair, loose clothing, 󼴩ngers and other parts of the body away from the

vacuum's openings and moving parts. Do not point the hose, wand or tools at your

eyes or ears or put them in your mouth.

• Do not put any object into the vacuum's openings. Do not use the vacuum with

any opening blocked. Keep free of dust, lint, hair, or other items which may reduce

air󼴪ow.

• Do not rest the vacuum against a chair, table, or other unstable surface, as this may

cause damage to the machine or personal injury.

To prevent accidents including electric shock or 󼴩re caused by improper use, please

read this manual carefully before use and retain it for future reference.

EN

2

• If the vacuum becomes damaged or is otherwise malfunctioning, please contact our

authorized service department. Never attempt to disassemble the device on your

own.

• All instructions in the manual for recharging the battery must be strictly followed.

Failure to properly charge the battery within the speci󼴩ed temperature range could

damage the battery.

• Make sure the vacuum is unplugged when not used for extended periods as well as

prior to performing any maintenance or repairs.

• Please be extra careful when using the vacuum to clean stairs.

• Do not install, charge, or use this product outdoors, in bathrooms, or around a pool.

• Fire Hazard Warning: Do not apply any type of fragrance to the vacuum's 󼴩lter.

These types of products are known to contain 󼴪ammable chemicals which may

cause the vacuum to catch 󼴩re.

• This product is designed for home use only.

• Only use the original charger (Model ZD024M340090EU/ZD024M340090AU).

• Only use the approved battery type (Model P2033-8S1P-PAA).

• Do not use and store in extremely hot or cold environments (below 0℃ /32° F or

above 40℃ /104° F). Please charge the cordless vacuum in temperature above 0℃

/32° F and below 40℃ /104° F.

We Dreame Trading (Tianjin) Co., Ltd., hereby, declares that this equipment is in

compliance with the applicable Directives and European Norms, and amendments.

The full text of the EU declaration of conformity is available at the following internet

address: www.dreame-technology.com

For detailed e-manual, please go to https://www.dreame-technology.com/pages/

user-manuals-and-faqs

EN

3

Product Overview

Accessories

Note: The images in this manual are for illustrative purposes only. The actual product may

di󼴨er.

2-in-1 Charging

& Storage Mount

(Including screws ×2,

wall plugs ×2, and

mounting template

sticker )

Smart Multi-Brush BarCharger

LED Crevice NozzleCarbon Fiber Rod

Extension Hose

2-in-1 Brush NozzleFlexible Adapter Mini Electric BrushSoft Dusting Brush

EN

4

Product Overview

Component Names

Display Screen

Antistatic Contact

Carbon Fiber Rod

Release Button

Brushbar Head Release

Button

Carbon Fiber Rod

Smart Multi-Brush Bar

Charging Port

Dust Cup

LED Battery Status Indicator

On/O󼴨 Switch

• Press to turn on

• Release to turn o󼴨

Battery Release Button

Dust Cup Bottom Cover

Release Button

EN

5

Product Overview

• The color of dust level indicator changes with the amount of inhaled dust.

• Residual time is for reference only and it may be di󼴨erent from the actual time.

Note:

Switching Suction Level

Press brie󼴪y to switch the

suction level

Lock Status

Dust Level Indicator

Suction Level Status

Residual Running-Time

Dust Level Monitoring Curve

The color of curve changes

with the amount of dust in

real time

• Red: High

• Orange: Med

• Green: Low

Electronic Lock/Reset Filter

• Press brie󼴪y to enter/exit

lock

• Press and hold for 1.5

seconds to enter the 󼴩lter

reset interface

Introduction of Display Screen

EN

6

Installation

Vacuum Installation

Diagram

Click

EN

7

Installation

Accessories Installation

Diagram

Click

EN

8

Click Click

Click

Accessories Installation Diagram

Installation

EN

9

2-in-1 Charging & Storage Mount Installation Diagram

(The 2-in-1 charging & storage mount is an optional accessory. You can install it based on

your needs.)

*30cm: Leave enough space just in case you

may need to purchase the replaceable battery

in the future.

1. The bottom of the mounting template sticker should be level and at least 103cm from

the ground. The top should have at least 30cm* of clearance above it.

2. Use a power drill with an 8mm drill bit to drill a hole into each marker on the mounting

template sticker, then insert a wall plug into each hole.

3. Align the locating holes on the mount with the holes on the wall. Fasten it to the wall

with the included screws.

Note:

The 2-in-1 charging & storage mount should be installed in a cool, dry place with an

electrical outlet nearby. Prior to installing, ensure that there are no electrical wires or

pipes in the space directly behind where the mount will be installed.

Installation

103 cm

30 cm

EN

10

Charging

Note: Once the vacuum is fully charged, the

indicator will turn o󼴨 after 5 minutes, and

the vacuum will enter energy-saving mode.

Charging the vacuum with the charger Charging the vacuum on the charging mount

Charging Methods

1

2

LED Battery Status IndicatorDisplay Screen

Battery Status Display

When charging, the indicators blink white.

When the charging is completed, the

indicators keep solid white.

The number on the display screen

represents the current battery level in a

percentage during charging. When the

number becomes 100, the battery is fully

charged.

Fully charge the vacuum before using it for the 󼴩rst time.

• A full charge will take approx. 4 hours.

• Vacuuming in Turbo Mode for a prolonged period will cause the battery to heat up, which

increases charging time. Allow the vacuum to cool down for 30 minutes before charging it.

Note:

EN

11

How to Use

Setting Language

Note: Stop the vacuum at any time while cleaning. It will continue to use the last selected

suction level when starting again.

Switching Suction Level

Press the button to switch between four suction levels of auto, eco, med and turbo. The

corresponding suction level will be highlighted on the display screen.

The color of dust level indicator changes with the amount of inhaled dust. When the

smart multi-brush bar is attached, the vacuum will automatically switch the suction level

between the 󼴪oor/tile and the carpet.

Press and hold the button for 3 seconds to enter the menu interface. Click the button

to swtich to "Language". Press the button for 1 second to enter the language selection

interface. Click to scroll through the language list, select a language, and then press

and hold for 3 seconds to save your setting.

Cleaning Record

Press and hold the button for 3 seconds to enter the menu interface. Click the button

to swtich to "Cleaning Record" and press the button for 1 second to enter the cleaning

record interface. Then you will see the cleaning record of the last 7 days.

• The display screen will return to the main page if there is no operation for more than 15 seconds.

• To exit the menu interface, click the button to select "Exit".

Note:

EN

12

How to Use

Working Methods

Note:

• In this mode, brie󼴪y press the on/o󼴨 switch to suspend the operation or start again and

the working mode of the vacuum will not change.

• Click the electronic lock again to quit Continuous Cleaning Mode.

Select from two working methods for the vacuum, which can be selected based on your

own needs.

When the vacuum is running, it will monitor the amout of inhaled dust within 1 second. The

amount of dust will be displayed by the color of dust level monitoring curve on the screen

in real time.

Method 1: Discontinuous Cleaning Mode

Press and hold the switch of the vacuum to enable this mode, and release it to stop

immediately.

Method 2: Continuous Cleaning Mode (Electronic Lock)

Click the electronic lock key to switch to Continuous Cleaning Mode, and then brie󼴪y press

the on/o󼴨 switch to keep the vacuum in Continuous Cleaning Mode.

Use the electronic lock to free your 󼴩ngers from fatigue caused by holding the switch.

EN

13

Using Di󼴨erent Accessories

Smart Multi-Brush Bar

For cleaning 󼴪oors such as marble, tile,

and low pile carpet. When Auto Mode is

activated, the vacuum will automatically

adjust its suction level depending on the

surface type.

Note: The smart multi-brush bar can be

attached directly to the vacuum.

Mini Electric Brush

For vacuuming dirt, pet hair, and other

stubborn debris from sofas, bedding, and

other fabric surfaces.

Note: It is not recommended to vacuum

on fragile surfaces, such as silk.

How to Use

2-in-1 Brush Nozzle Soft Dusting Brush

For vacuuming dust from curtains,

keyboards, ceilings, sofas, vehicle

interiors, co󼴨ee tables, etc.

Suitable for vacuuming on LCDs,

keyboards, lampshades, curtains, shutters

and other surfaces of fragile objects.

EN

14

How to Use

Note:

• If any rotating part becomes stuck, the vacuum may shut o󼴨 automatically. Remove any

trapped objects so the device can function normally.

• When the battery becomes overheated, the vacuum will automatically shut o󼴨. Wait until

the battery temperature returns to normal, then the vacuum will work normally.

Extension Hose

It is suitable for vacuuming the corners that are not easily accessible such as drawers, cars

interior, and in the bottom of sofa when used with soft dusting brush or 2-in-1 brush nozzle.

Flexible Adapter LED Crevice Nozzle

Bending and extending the rod with one

click can easily reach under low-lying

furniture, such as bed and sofa.

The nozzle is equipped with a thin suction

opening and LED light. It is suitable for

vacuuming the debris in the narrow places.

EN

15

Care & Maintenance

Tips:

1. Always use genuine parts to keep your warranty from becoming void.

2. If the 󼴩lter or nozzle becomes clogged, the vacuum will stop working shortly after being

turned on. To restore normal functions, clean the 󼴩lter and/or nozzle.

3. If the vacuum is not be used for an extended period, fully charge it, unplug its charger,

and store it in a cool, low-humidity environment away from direct sunlight. To avoid

over-discharging the battery, recharge the vacuum at least once every three months.

2. Push the dust cup release switch in the direction indicated by the arrow, then gently

remove the dust cup from the vacuum.

Cleaning the Vacuum

Wipe the vacuum with a soft dry cloth.

Cleaning the Dust Cup, Pre-Filter, and Cyclone Assembly

The vacuum's cleaning ability will be reduced if the dust cup is 󼴩lled to the "MAX" mark.

To regain performance, empty the dust cup in a timely manner. Before emptying the cup,

make sure the vacuum is disconnected from the power, and do not press its power button.

1. Press the dust cup bottom cover release button, then empty the contents.

2

1

EN

16

Care & Maintenance

3. Remove the pre-󼴩lter 󼴩rst, then lift the handle of the cyclone assembly and turn it

counterclockwise until it stops, then pull to lift out the cyclone assembly.

Note: It is recommended to clean the pre-󼴩lter at least once every 3 months and the

cyclone system at least once every 6 months.

1

2

3

Pre-FilterCyclone Assembly

4. Wipe the dust cup with a soft wet cloth. Pay attention to wring out the discloth before

using.

5. Rinse the cyclone assembly and pre-󼴩lter until they are clean. After washing, air dry for

at least 24 hours .

12

6

111

57

210

48

39 24 hrs

To reduce the risk

of electric shock, do

not rinse the dust

cup with water.

EN

17

Installing the Dust Cup, Pre-Filter, and Cyclone Assembly

1. Insert the cyclone assembly vertically into the dust cup, and make sure that the handle

of the cyclone assembly line up with the slot on the left side of the dust cup. Turn the

handle clockwise until it locks, then 󼴪ip the handle down.

2. Place the pre-󼴩lter with its front side facing up into the cyclone assembly.

3. Slightly tilt the dust cup so its slot aligns with the clip on the vacuum. Then gently push

the dust cup until it clicks into place.

3

1

2

3

Care & Maintenance EN

La page charge ...

DREAME T30 Cordless Vacuum Cleaner Manuel utilisateur

Ce manuel convient également à

DREAME T30 Cordless Vacuum Cleaner Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents