Hui Zhou Gaoshengda Technology WT5YM2511 Wi-Fi+BT Module Mode d'emploi

Marque
Hui Zhou Gaoshengda Technology
Modèle
WT5YM2511 Wi-Fi+BT Module
Taper
Mode d'emploi

Ce manuel convient également à

Hui Zhou Gaoshengda Technology Co., LTD WT5YM2511
PAGE 1 OF 5
Version 1.0
WIFI+BT Module
IEEE 802.11 a/b/g/n 2T/2R
Model Number: WT5YM2511
Product Descrition
The WT5YM2511 is a complete dual-band(2.4GHz and 5GHz)WIFI 2×2 MIMO module. This module provides a
high level of integration with a dual-stream IEEE 802.11n MAC/ base band /radio and Bluetooth 5.0.The WLAN
operation supports 20MHz,40MHz channels for data rates up to 300Mbps. It fully complies with IEEE 802.11
a/b/g/n feature rich wireless connectivity at high standards,delivers reliable,cost-effective, throughput from an
extended distance.
Product Features
Product Specification
Model
WIF+BT Module
Product Name
WT5YM2511
Standard
802.11 a /b/g/n
Interface
USB
Data Transfer Rate
1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 300Mbps
Modulation Method
GFSK,π/4-DQPSK,8DPSK(bluetooth)
DQPSK,DBPSK,CCK(802.11b)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11a)
Frequency Band
BLUETOOTH
2402~2480 MHz
WIFI
2.4G: 2412~2462 MHz
5G: 5150~5250MHz,5725~5850MHz
Operation Mode
Infrastructure
Security
WEP, TKIP, AES, WPA, WPA2
Operating Voltage
5V±10%
Current Consumption
＜1000mA
Antenna Type
PIFA
Operating
Temperature
0 ~ 70°C ambient temperature
Storage Temperature
-40 ~ 80°C ambient temperature
Humidity
5 to 95 % maximum (non-condensing)
◆ Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n 5GHz Wireless LAN.
◆ Bluetooth v5.0
◆ Two transmit and Two receive path(2T2R)
◆ Works with all existing network nfrastructure.
◆ Capable of up to 128-Bit WEP Encryption.
◆ Freedom to roam while staying connected.
◆ UP to 300 Mbps High-Speed Transfer Rate in 802.11n mode of operation.
◆ Operating Systems：Linux,Win7, Win8, Win10,XP
◆ Low power consumption.
◆ Easy to install and configure.
◆ High speed USB 2.0 interface
◆ROHS compliant
Hui Zhou Gaoshengda Technology Co., LTD WT5YM2511
PAGE 2 OF 5
Version 1.0
NOTICE:
◆please keep this product and accessories attached to the places which children can't touch;
◆do not splash water or other liquid onto this product, otherwise it may cause damage;
◆do not put this product near the heat source or direct sunlight, otherwise it may cause
deformation or malfunction;
◆please keep this product away from flammable or naked flame;
◆please do not repair this product by yourself. Only qualified personnel can be repaired.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Please notice that if the FCC identification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label
can use wording such as the following: “Contains FCC ID:2AC23-WT5Y” any similar wording
that expresses the same meaning may be used.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
CFR 47 FCC Part 15 Subpart C (15.247, DTS ) and FCC Part 15 Subpart E(NII )has been investigated. It is applicable to
the modular transmitter.
This radio transmitter 2AC23-WT5Y has been approved by Federal Communications Commission to operate with the
antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a
gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
Hui Zhou Gaoshengda Technology Co., LTD WT5YM2511
PAGE 3 OF 5
Version 1.0
Manufacture: Hui Zhou Gaoshengda Technology Co.,LTD
BT BLE antenna
Antenna
Antenna Type
MAX Antenna Gain (dBi)
1
External PIFA
Antenna
3
2.4G wifi antenna
Antenna
Antenna Type
MAX Antenna Gain (dBi)
1
Inverted F PCB
antenna
3
2
Inverted F PCB
antenna
3
5G wifi antenna
Antenna No.
Frequency Band
Antenna Type
Max Antenna
Gain (dBi)
Directional Gain
(dBi)
1
UNII-1&UNII-2A&UNII-2C&UNII-3
Inverted F PCB antenna
4
7.01
2
UNII-1&UNII-2A&UNII-2C&UNII-3
Inverted F PCB antenna
4
For WIFI antenna is permanently attached, can’t be replaced.
EUT has an external BT antenna with antenna connector.
Notice to OEM integrator
Must use the device only in host devices that meet the FCC/ISED RF exposure category of mobile, which means the
device is installed and used at distances of at least 20cm from persons.
The end user manual shall include FCC Part 15 /ISED RSS GEN compliance statements related to the transmitter as
show in this manual.
Host manufacturer is responsible for compliance of the host system with module installed with all other applicable
requirements for the system such as Part 15 B, ICES 003.
Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the transmitter
when the module is installed in the host.
Must have on the host device a label showing Contains FCC ID: 2AC23-WT5Y，IC: 12290A-WT5Y
l'hôte doit utiliser l'instrument uniquement dans des dispositifs qui répondent à la fcc / (catégorie d'exposition rf
mobile, ce qui signifie le dispositif est installé et utilisé à une distance d'au moins 20 cm de personnes.
le manuel de l'utilisateur final doit inclure la partie 15 / (fac rss gen déclarations de conformité relatives à
l'émetteur que de montrer dans ce manuel.
le fabricant est responsable de la conformité de l'hôte, le système d'accueil avec le module installé avec toutes
les autres exigences applicables du système comme la partie 15 b, ices - 003.
accueillir le fabricant est fortement recommandé de confirmer la conformité avec les exigences de la fcc /
(émetteur lorsque le module est installé dans l'hôte.
le dispositif d'accueil doivent avoir une étiquette indiquant contient FCC ID: 2AC23-WT5Y，IC: 12290A-WT5Y
Hui Zhou Gaoshengda Technology Co., LTD WT5YM2511
PAGE 4 OF 5
Version 1.0
The devices must be installed and used in strict accordance with the manufacturer’s instruction as described in the user
documentation that comes with the product.
Any company of the host device which install this modular should perform the test of radiated &
condicted emission and spurious emission etc. according to FCC Part 15C: 15.247 and 15.209 &
15.207, 15B class B requirement, only if the test result comply with FCC part 15C: 15.247 and
15.209 & 15.207, 15B class B requirement. Then the host can be sold legally.
This modular transmitter is only FCC authorized for the specific rule parts ( 47CFR Part 15.247 and 15.407) listed on the
grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not
covered by the modular transmitter grant of certification.
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
Please notice that if the ISED certification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label
can use wording such as the following: “Contains IC:12290A-WT5Y” any similar wording that
expresses the same meaning may be used.
l'appareil hôte doit porter une étiquette donnant le numéro de certification du module
d'Industrie Canada, précédé des mots « Contient un module d'émission », du mot « IC:12290A-
WT5Y » ou d'une formulation similaire exprimant le même sens, comme suit
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.
limits as appropriate;
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux;
pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour
Hui Zhou Gaoshengda Technology Co., LTD WT5YM2511
PAGE 5 OF 5
Version 1.0
les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite
de la p.i.r.e. spécifiée, selon le cas;
This radio transmitter 12290A-WT5Y has been approved by Innovation, Science and Economic
Development Canada to operate with the antenna types listed below, with the maximum permissible
gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain
indicated for any type listed are strictly prohibited for use with this device.
Le présent émetteur radio 12290A-WT5Y a été approuvé par Innovation, Sciences et Développement
économique Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain
admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au
gain maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de
l'émetteur.
The concrete contents to check are the following three points.
１) Must use following one of the three antenna.
２) Should be installed so that the end user cannot modify the antenna;
３) Feed line should be designed in 50ohm
Fine tuning of return loss etc. can be performed using a matching network.
Le contenu concret à vérifier sont les trois points suivants.
１) Une des trois antennes suivantes doit être utilisée.
２) doivent être installés de façon que l'utilisateur final ne peut pas modifier l'antenne
３) La ligne d’alimentation doit être conçue en 50ohm
Le réglage précis de la perte de rendement, etc. peut être effectué en utilisant un réseau correspondant.
BT BLE antenna
Antenne
Type d'antenne
Gain d'antenne(dBi)
1
External PIFA
Antenna
3
2.4G wifi antenna
Antenne
Type d'antenne
Gain d'antenne(dBi)
1
Inverted F PCB
antenna
3
2
Inverted F PCB
antenna
3
5G wifi antenna
Antenna No.
fréquences Band
Type d'antenne
Gain
d'antenne(dBi)
Directional Gain
(dBi)
1
UNII-1&UNII-2A&UNII-2C&UNII-3
Inverted F PCB antenna
4
7.01
2
UNII-1&UNII-2A&UNII-2C&UNII-3
Inverted F PCB antenna
4
Comme l'antenne wifi est connectée en permanence, elle ne peut pas être remplacée.
L'eut a une antenne BT externe avec un connecteur d'antenne.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Hui Zhou Gaoshengda Technology WT5YM2511 Wi-Fi+BT Module Mode d'emploi

Marque
Hui Zhou Gaoshengda Technology
Modèle
WT5YM2511 Wi-Fi+BT Module
Taper
Mode d'emploi
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents