Samsung Blu-ray Player H6500 Manuel utilisateur

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Blu-ray™ Disc Player

user manual

BD-H6500

02465B-BD-H6500-ZC-ENG-.indd 1 2014-01-24 오후 12:19:28

2 English

Safety Information

• The slots and openings in the cabinet and in

the back or bottom are provided for necessary

ventilation. To ensure reliable operation of this

apparatus, and to protect it from overheating,

these slots and openings must never be

blocked or covered.

- Do not place this apparatus in a confined

space, such as a bookcase, or built-in

cabinet, unless proper ventilation is provided.

- Do not place this apparatus near or over a

radiator or heat register, or where it is exposed

to direct sunlight.

- Do not place vessels (vases etc.) containing

water on this apparatus. A water spill can

cause a fire or electric shock.

• Do not expose this apparatus to rain or place it

near water (near a bathtub, washbowl, kitchen

sink, or pool, etc.). If this apparatus accidentally

gets wet, unplug it and contact an authorized

dealer immediately.

• This apparatus uses batteries. In your

community, there might be environmental

regulations that require you to dispose of these

batteries properly. Please contact your local

authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or

adaptors beyond their capacity, since this can

result in fire or electric shock.

• Route power-supply cords so that they are

not likely to be walked on or pinched by items

placed on or against them. Pay particular

attention to cords at the plug end, at wall

outlets, and the point where they exit from the

apparatus.

• To protect this apparatus from a lightning storm,

or when it is left unattended and unused for

long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable

system. This will prevent damage to the set due

to lightning and power line surges.

• Before connecting the AC power cord to the

DC adaptor outlet, make sure the voltage

designation of the DC adaptor corresponds to

the local electrical supply.

• Never insert anything metallic into the open

parts of this apparatus. Doing so may create a

danger of electric shock.

• To avoid electric shock, never touch the inside

of this apparatus. Only a qualified technician

should open this apparatus.

• Make sure to plug the power cord in until it is

firmly seated. When unplugging the power cord

from a wall outlet, always pull on the power

cord's plug. Never unplug by pulling on the

power cord. Do not touch the power cord with

wet hands.

• If this apparatus does not operate normally -

in particular, if there are any unusual sounds or

smells coming from it - unplug it immediately

and contact an authorized dealer or service

center.

Warning

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE

PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is

present inside. It is dangerous to make any

kind of contact with any internal part of this

product.

This symbol indicates that important

literature concerning operation and

maintenance has been included with this

product.

02465B-BD-H6500-ZC-ENG-.indd 2 2014-01-24 오후 12:19:29

3 English

01 Safety Information

• Maintenance of Cabinet.

- Before connecting other components to this

product, be sure to turn them off.

- If you move your product suddenly from a

cold place to a warm place, condensation

may occur on the operating parts and lens

and cause abnormal disc playback. If this

occurs, unplug the product, wait for two

hours, and then connect the plug to the

power outlet. Then, insert the disc, and try to

play back again.

• Be sure to pull the power plug out of the outlet

if the product is to remain unused or if you are

leaving the house for an extended period of time

(especially when children, elderly, or disabled

people will be left alone in the house).

- Accumulated dust can cause an electric

shock, an electric leakage, or a fire by causing

the power cord to generate sparks and heat

or the insulation to deteriorate.

• Contact an authorized service center for

information if you intend to install your

product in a location with heavy dust, high

or low temperatures, high humidity, chemical

substances, or where it will operate 24 hours

a day such as in an airport, a train station, etc.

Failing to do so may lead to serious damage of

your product.

• Use only a properly grounded plug and wall

outlet.

- An improper ground may cause electric shock

or equipment damage. (Class l Equipment

only.)

• To turn this apparatus off completely, you must

disconnect it from the wall outlet. Consequently,

the wall outlet and power plug must be readily

accessible at all times.

• Do not allow children to hang on the product.

• Store the accessories (battery, etc.) in a location

safely out of the reach of children.

• Do not install the product in an unstable location

such as a shaky self, a slanted floor, or a

location exposed to vibration.

• Do not drop or strike the product. If the product

is damaged, disconnect the power cord and

contact a service center.

• To clean this apparatus, unplug the power cord

from the wall outlet and wipe the product using

a soft, dry cloth. Do not use any chemicals such

as wax, benzene, alcohol, thinners, insecticide,

air fresheners, lubricants, or detergent. These

chemicals can damage the appearance of the

product or erase the printing on the product.

• Do not expose this apparatus to dripping or

splashing. Do not put objects filled with liquids,

such as vases on the apparatus.

• Do not dispose of batteries in a fire.

• Do not plug multiple electric devices into the

same wall socket. Overloading a socket can

cause it to overheat, resulting in a fire.

• There is danger of an explosion if you replace

the batteries used in the remote with the wrong

type of battery. Replace only with the same or

equivalent type.

• WARNING - TO PREVENT THE

SPREAD OF FIRE, KEEP CANDLES

AND OTHER ITEMS WITH OPEN

FLAMES AWAY FROM THIS

PRODUCT AT ALL TIMES.

FCC NOTE (for U.S.A)

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and on.

The user is encouraged to try to correct the

interference by one or more of the following

measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

02465B-BD-H6500-ZC-ENG-.indd 3 2014-01-24 오후 12:19:29

• To reduce the risk of fire or electric shock,

do not expose this appliance to rain or moisture.

4 English

Safety Information

• Connect this equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

• This class B digital product meets all

requirements of the Canadian Interference -

Causing Equipment Regulations.

Note to CATV system installer

This reminder is provided to call CATV system

installer's attention to Article 820-40 of the

National Electrical Code (Section 54 of Canadian

Electrical Code, Part I) that provides guidelines

for proper grounding and, in particular, specifies

that the cable ground shall be connected to the

grounding system of the building as close to the

point of cable entry as practical.

CLASS 1 LASER product

This Compact Disc player is classified as a CLASS

1 LASER product. Use of controls, adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID DIRECT EXPOSURE TO

BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE

TO THE BEAM. (IEC 60825-1)

• THIS product UTILIZES A LASER. USE

OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN THE COVER.

DO NOT REPAIR THE PRODUCT YOURSELF.

REFER SERVICING TO QUALIFIED

PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

| NOTE |

\

If the Region number of a Blu-ray Disc/DVDs does not

correspond to the Region number of this product, the

product cannot play the disc.

Precautions

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions

listed below.

Keep these operating instructions handy for future

reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including AV receivers) that

produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet.

02465B-BD-H6500-ZC-ENG-.indd 4 2014-01-24 오후 12:19:29

5 English

01 Safety Information

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where it exits the

apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket,

or table specified by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as when the power-supply cord or plug

is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION

FOR 3D PICTURES.

Read and understand the following safety

information before using the 3D function.

• Some viewers may experience discomfort while

viewing 3D TV such as dizziness, nausea, and

headaches.

If you experience any such symptom, stop

viewing 3D TV, remove the 3D Active Glasses,

and rest.

• Watching 3D images for an extended period of

time may cause eye strain. If you feel eye strain,

stop viewing 3D TV, remove your 3D Active

Glasses, and rest.

• A responsible adult should frequently check on

children who are using the 3D function.

If there are any reports of tired eyes, headaches,

dizziness, or nausea, have the child stop viewing

3D TV and rest.

• Do not use the 3D Active Glasses for other

purposes (such as general eyeglasses,

sunglasses, protective goggles, etc.).

• Do not use the 3D function or 3D Active Glasses

while walking or moving around. Using the 3D

function or 3D Active Glasses while moving

around may cause you to bump into objects,

trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D

device (3D compliant AV receiver or TV) to the

player's HDMI OUT port using a high-speed

HDMI cable. Put on 3D glasses before playing

the 3D content.

• The player outputs 3D signals only through

HDMI cable connected to the HDMI OUT port.

• The video resolution in 3D play mode is

determined by the resolution of the original 3D

video. You can not change the resolution.

• Some functions such as BD Wise, screen size

adjustment, and resolution adjustment may not

operate properly in 3D play mode.

• You must use a high-speed HDMI cable for

proper output of the 3D signal.

• Stay at least three times the width of the screen

from the TV when watching 3D images. For

example, if you have a 46-inch screen, stay 138

inches (11.5 feet) from the screen.

• Place the 3D video screen at eye level for the

best 3D picture.

• When the player is connected to some 3D

devices, the 3D effect may not function properly.

• This player does not convert 2D content into

3D.

• "Blu-ray 3D" and "Blu-ray 3D" logo are

trademarks of the Blu-ray Disc Association.

02465B-BD-H6500-ZC-ENG-.indd 5 2014-01-24 오후 12:19:30

6 English

Contents

SAFETY INFORMATION

2 Warning

4 Precautions

4 Important Safety Instructions

5 Using the 3D function

GETTING STARTED

8 Accessories

9 Front Panel

9 Rear Panel

10 Remote Control

10 Tour of the Remote Control

CONNECTIONS

11 Connecting to a TV

12 Connecting to an Audio System

12 Method 1 Connecting to an HDMI

supported AV receiver

12 Method 2 Connecting to an AV receiver

with Dolby Digital or DTS decoder

13 Connecting to a Network Router

13 Wired Network

13 Wireless Network

SETTINGS

14 The Initial Settings Procedure

14 The Home Screen

15 Accessing the Settings Screen

15 Buttons on the Remote Control Used for

the Settings Menu

16 Settings Menu Functions

16 Picture

17 Sound

17 Network

18 Smart Hub

18 System

20 Support

20 Networks and the Internet

20 Configuring Your Network Connection

23 Wi-Fi Direct

23 Upgrading Software

24 Update Now

24 Auto Update

MEDIA PLAY

26 Playing Commercial Discs

26 Disc Storage & Management

26 Playing Photos, Videos, and Music

(Multimedia)

26 Playing Media Content Saved on a USB

Device

27 Playing Media Content Saved in a

Computer/Mobile Device

27 Playing a Disc with User Recorded

Content

28 Playing Media Content Saved in a Cloud

Service

28 Samsung Link

29 Controlling Video Playback

29 Buttons on the Remote Control used for

Video Playback

29 Using the Settings Menu (During the

Playback)

31 Using the View & Options Menus

02465B-BD-H6500-ZC-ENG-.indd 6 2014-01-24 오후 12:19:30

7 English

Contents

31 Controlling Music Playback

31 Buttons on the Remote Control used for

Music Playback

32 Using the Options Menu (During the

Playback)

32 Using the View & Options Menus (On a file

screen)

33 Repeating Tracks on an Audio CD

33 Shuffling Tracks on an Audio CD

33 Creating a Playlist from an Audio CD

33 Ripping

34 Playing Photo Contents

34 Using the Tools Menu (During Playback)

35 Using the View & Options Menus

36 Send files

36 Copying Videos, Music or Photos

36 Using the Send Function

NETWORK SERVICES

37 Creating a Samsung Account

37 Before Using Movies & TV Shows or

Samsung Apps

38 Using Movies & TV Shows

39 Using Samsung Apps

39 The Samsung Apps Screen at a Glance

40 Starting an Application

41 Screen mirroring

41 Using the Web Browser

42 Link Browsing and Pointer Browsing

42 The Control Panel at a Glance

43 Using the Setting Menu

45 Linking Your Internet Service Accounts

to the Product

45 BD-LIVE™

APPENDIX

46 Additional Information

46 Notes

48 Resolution according to the contents type

49 Digital Output Selection

50 Troubleshooting

52 Repairs

53 Disc and Format Compatibility

53 Disc types and contents your product can

play

53 Disc types your product cannot play

54 Region Code

54 Logos of Discs the product can play

55 Supported Formats

58 Compliance and Compatibility Notice

59 Copy Protection

59 Network Service Disclaimer

60 Licenses

61 Specifications

02465B-BD-H6500-ZC-ENG-.indd 7 2014-01-24 오후 12:19:30

8 English

Getting Started

Accessories

Check for the supplied accessories shown below.

APPS

PANDORA

DIGITAL

SUBTITLE

INPUT

HOME

1

4

7

VOL

+

2

5

8

0

VOL

–

3

6

9

SOURCE

DISC MENU

SMART

TITLE MENU

VOL VOL

POPUP

A B C D

SEARCH FULLSUBTITLE

SCREEN

SAMSUNG TV

– +

INFOTOOLS

RETURN

EXIT

HOME

AUDIO

REPEAT

HUB

Batteries for Remote Control (AAA Size)

User Manual Remote Control

02465B-BD-H6500-ZC-ENG-.indd 8 2014-01-24 오후 12:19:31

9 English

02 Getting Started

Front Panel

PLAY/PAUSE BUTTON

USB HOST

REMOTE CONTROL SENSOR

DISC TRAY

DISPLAY

STOP BUTTON

POWER BUTTON

OPEN/CLOSE BUTTON

| NOTE |

\

To upgrade the product's software through the USB Host jack, you must use a USB memory stick.

\

When the product displays the Blu-ray Disc's menu, you cannot start the movie by pressing the Play button on the product

or the remote control. To play the movie, you must select Play Movie or Start in the disc's menu, and then press the

v

button on the remote control.

Rear Panel

HDMI OUT LAN

DIGITAL AUDIO OUT

02465B-BD-H6500-ZC-ENG-.indd 9 2014-01-24 오후 12:19:31

10 English

Getting Started

Remote Control

Tour of the Remote Control

APPS

PANDORA

DIGITAL

SUBTITLE

INPUT

HOME

1

4

7

VOL+

2

5

8

0

VOL–

3

6

9

SOURCE

DISC MENU

SMART

TITLE MENU

VOL VOL

POPUP

A B C D

SEARCH FULLSUBTITLE

SCREEN

SAMSUNG TV

– +

INFOTOOLS

RETURN

EXIT

AUDIO

REPEAT

HUB

HOME

Press to open and close the disc tray.

After setup, allows you to set the input

source on your TV.

(This button is only available for Samsung TVs.)

Turn the player on and off.

Return to the previous menu.

These buttons are used both for menus

on the player and also several Blu-ray Disc

functions.

Press the number buttons to operate

options.

Use to enter the disc menu.

Press to skip backwards or forwards.

Press to search backwards or forwards.

Use to access various audio functions on a

disc.

Press to use Apps.

Press to stop a disc.

Press to move to the Home screen.

Turn the TV on and off.

(This button is only available for Samsung

TVs.)

TV volume adjustment.

(This button is only available for Samsung TVs.)

Press to pause a disc.

Press to play a disc.

Press to switch the Blu-ray Disc/DVD's

subtitle language.

Press to use the Tools menu.

Use to display the playback information.

Use to select menu items and change

menu values.

Press to exit the menu.

Use to enter the Popup menu/Title menu.

Allows you to repeat a title, chapter, track

or disc.

Press to search contents.

Press to use full screen function.

During the Blu-ray Disc/DVDs playback,

this button does not operate.

Installing batteries

| NOTE |

\

If the remote control does not operate properly:

- Check the polarity +/– of the batteries.

- Check if the batteries are drained.

- Check if the remote sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

| CAUTION |

\

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

02465B-BD-H6500-ZC-ENG-.indd 10 2014-01-24 오후 12:19:32

11 English

03 Connections

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI

IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Audio

Video

| NOTE |

\

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO OUT on the

product to an audio system to hear audio.

\

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

\

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

\

When you connect the product to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the

product automatically sets the HDMI output resolution to the highest supported by the TV.

\

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

\

To view video in the HDMI 720p,1080i,1080p or 2160p output mode, you must use a High speed (category 2) HDMI cable.

\

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

02465B-BD-H6500-ZC-ENG-.indd 11 2014-01-24 오후 12:19:32

12 English

Connections

Connecting to an Audio System

You can connect this product to the audio system using the methods illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the

HDMI IN jack on your receiver.

• Best quality (Recommended)

Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder

• Using a digital Optical cable (not supplied), connect the OPTICAL DIGITAL AUDIO OUT jack on the

product to the DIGITAL OPTICAL IN jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output set to PCM.

AudioAudio

Method 2Method 1

02465B-BD-H6500-ZC-ENG-.indd 12 2014-01-24 오후 12:19:33

13 English

03 Connections

Connecting to a Network Router

You can connect your product to your network

router using one of the methods illustrated below.

To use the AllShare network functionality, you

must connect your PC to your network as shown

in the illustrations.

The connection can be wired or wireless.

Wired Network

Broadband

service

Broadband

service

Broadband modem

(with integrated router)

Broadband

modem

Router

Or

| NOTE |

\

Your router or your Internet Service Provider's policies

may prevent the product from accessing Samsung's

software update server. If this occurs, contact your

Internet Service Provider (ISP) for more information.

\

DSL users, please use a router to make a network

connection.

Wireless Network

Broadband

service

Wireless Router

| NOTE |

\

If your wireless router supports DHCP, this product can

use a DHCP or static IP address to connect to the wireless

network.

\

Set your wireless router to Infrastructure mode. Ad-hoc

mode is not supported.

\

The product supports only the following wireless security

key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)

\

Select a channel on the wireless router that is not

currently being used. If the channel set for the wireless

router is currently being used by another device nearby, it

will result in interference and communication failure.

\

If you select the Pure High-throughput (Greenfield)

802.11n mode and set the Encryption type on your router

to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will

not support a connection in compliance with new Wi-Fi

certification specifications.

\

Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (router

performance, distance, obstacles, interference by other

radio devices, etc).

02465B-BD-H6500-ZC-ENG-.indd 13 2014-01-24 오후 12:19:34

14 English

SettingsSettings

The Initial Settings Procedure

• The Home screen will not appear if you do not

configure the initial settings.

• The OSD (On Screen Display) may change in this

product after you upgrade the software version.

• The access steps may differ depending on the menu

you selected.

After you have connected the product to your

TV, turn on the TV and product. When you turn

on the product the first time, the product's Initial

Settings screen appears on the TV. The Initial

Settings procedure lets you set the On Screen

Display (OSD) and menu languages, the aspect

ratio (screen size), and network configuration, and

connect the player to the Internet.

| NOTE |

\

If you skip Network Setup during the Initial Settings

procedure, you can configure your network settings later.

See "Configuring Your Network Connection" on pages

20~23 for instructions.

\

If you want to display the Initial Settings screen again and

make changes, select Settings > System > Setup in

the Home screen or select the Reset option. (See pages

18 or 20)

\

If you want to use an Anynet+(HDMI-CEC) function,

please follow the instructions below.

1) Connect the product to an Anynet+(HDMI-CEC)-

compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in both the

TV and the product.

3) Set the TV to the Initial Settings Procedure.

The Home Screen

PLAY DISC MOVIES & TV SHOWS MULTIMEDIA

4 5 6

Screen Mirroring Settings

APPS

WebBrowser

2 3

No Disc

1 2 3 6

4 5

7 8 9

1

PLAY DISC : Lets you play photos, videos, or music

content from Disc.

2

MOVIES & TV SHOWS : Lets you view Movies and

TV Shows from the Internet.

| NOTE |

\

Depending on your country, this menu function

may not be supported.

3

MULTIMEDIA : Lets you play photos, videos, or

music content from USB or mobile devices, or PCs.

4

Sign In : Lets you log in with your Samsung account.

5

Search : Lets you search for contents in Movies

and TV Shows, Apps and YouTube by entering

corresponding search words.

6

APPS : Gives you access to various applications you

can download.

7

My Apps : Apps downloaded from My Apps are

displayed.

8

Screen Mirroring : Lets you view the screen of

your smart phone or android tablet on a TV you

have connected to this product.

9

Settings : Opens the product's menu. In the menu

can set various functions to suit your personal

preferences.

| NOTE |

\

If you leave the product in the stop mode for more than

5 minutes without using it, a screen saver will appear on

your TV. If the product is left in the screen saver mode for

more than 20 minutes, the power will automatically turn off.

02465B-BD-H6500-ZC-ENG-.indd 14 2014-01-24 오후 12:19:34

15 English

04 Settings

Accessing the Settings Screen

1. Select Settings on the Home screen, and

then press

v

button. The Settings screen

appears.

Settings

Picture

Sound

Network

Smart Hub

System

Support

Picture

UHD Output Auto

3D Settings

TV Aspect Ratio 16:9 Original

BD Wise Off

Resolution Auto

Movie Frame (24Fs) Auto

DVD 24Fs Conversion Off

2. To access the menus, sub-menus, and

options on the Settings screen, please refer

to the remote control illustration below.

Buttons on the Remote Control Used

for the Settings Menu

APPS

PANDORA

DIGITAL

SUBTITLE

INPUT

HOME

1

4

7

VOL

+

2

5

8

0

VOL

–

3

6

9

SOURCE

DISC MENU

SMART

TITLE MENU

VOL VOL

POPUP

A B C D

SEARCH FULLSUBTITLE

SCREEN

SAMSUNG TV

– +

INFOTOOLS

RETURN

EXIT

HOME

AUDIO

REPEAT

HUB

1

2 4

3

1

HOME button : Press to move to the Home screen.

2

RETURN button : Press to return to the previous

menu.

3

v

(Enter) / DIRECTION buttons :

• Press ▲▼◄► to move the cursor or select an

item.

• Press the

v

button to activate the currently

selected item or confirm a setting.

4

EXIT button : Press to exit the current menu.

Detailed Function Information

Each Settings function, menu item, and individual

option is explained in detail on-screen. To view an

explanation, use the ▲▼◄► buttons to select the

function, menu item, or option. The explanation

will usually appear on the right side of the screen.

A short description of each Settings function

starts on the next page. Additional information on

some of the functions is also in the Appendix of

this manual.

02465B-BD-H6500-ZC-ENG-.indd 15 2014-01-24 오후 12:19:35

16 English

Settings

Settings Menu Functions

Picture

UHD Output

This option outputs HDMI video at UHD (Ultra

High Definition) resolution. This is only available

when Movie Frame is set to Auto.

| NOTE |

\

To use this feature, you must connect the product to

a device that supports UHD resolution and you must

have content that plays at 24Fs (film speed).

\

This device cannot play UHD contents However

contents with resolution lower than Full HD can be up-

scaled to UHD.

\

For UHD resolution output, only 2160*3840 24 frame

rate output is available.

3D Settings

Select whether to play a Blu-ray Disc with 3D

contents in 3D Mode.



If you move to the Home or Apps screen while

in 3D mode, the product will switch to 2D mode

automatically.

TV Aspect Ratio

Lets you adjust the output of the product to the

screen size and screen format of your TV.

BD Wise

BD Wise is Samsung's latest inter-connectivity

feature.

When you connect a Samsung product and a

Samsung TV with BD Wise to each other via

HDMI, and BD Wise is on in both the product

and TV, the product outputs video at the video

resolution and frame rate of the Blu-ray Disc/DVD.

Resolution

Set the output resolution of the HDMI video signal

to BD Wise, Auto, 1080p, 1080i, 720p or 480p.

The number indicates the number of lines of video

per frame.

The i and p indicate interlaced and progressive

scan, respectively. Generally, the more lines, the

higher quality.

Movie Frame (24Fs)

If the product is connected to a 24Fs compatible

TV, setting the Movie Frame (24Fs) feature to

Auto lets the product adjust its HDMI output to

24 frames per second automatically for improved

picture quality.

•

You can enjoy the Movie Frame (24Fs) feature

only on a TV supporting this frame rate.

•

Movie Frame is only available when the product

is in the HDMI 1080i or 1080p output resolution

modes.

DVD 24Fs Conversion

Converts DVD playback to 24 frames per second

and outputs it via HDMI. This option is only

available when Movie Frame (24Fs) is set to on.

Fit Screen Size

Set the screen to the optimal size. (Apply Smart

Hub, Screen Mirroring only)

HDMI Color Format

Lets you set the color space format for the HDMI

output so that it matches the capabilities of the

connected device (TV, monitor, etc). The screen

goes black momentarily after you have selected a

format.

HDMI Deep Color

Lets you set the product to output HDMI video

with Deep Color. Deep Color provides more

accurate color reproduction with greater color

depth.

Progressive Mode

Lets you improve picture quality when viewing

DVDs.

02465B-BD-H6500-ZC-ENG-.indd 16 2014-01-24 오후 12:19:35

17 English

04 Settings

Sound

Digital Output

Lets you select the digital audio output format that

is suitable for your TV or AV Receiver. For more

details, see the digital output selection table on

page 48.

PCM Downsampling

Lets you choose to have 96Khz PCM signals

downsampled to 48Khz before they are outputted

to an amplifier. Choose On if your amplifier or

receiver is not compatible with a 96Khz signal.

Dynamic Range Control

Lets you apply dynamic range control to Dolby

Digital, Dolby Digital Plus, and Dolby TrueHD

audio.



Auto : Automatically controls the dynamic range

of Dolby TrueHD audio, based on information

in the Dolby TrueHD soundtrack. Also turns

dynamic range control on for Dolby Digital and

Dolby Digital Plus.



Off : Leaves the dynamic range uncompressed,

letting you hear the original sound.



On : Turns dynamic range control on for all three

Dolby formats. Quieter sounds are made louder

and the volume of loud sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix method

that is compatible with your stereo system. You

can choose to have the product downmix to

normal stereo or to surround compatible stereo.

DTS Neo:6 Mode

You can enjoy multichannel sound via HDMI

output from a 2 channel audio source.

Audio Sync

In some cases when the product is connected to

a digital TV, the audio signal may not synchronize

with the video signal. If this occurs, adjust the

audio delay time to match the video signal.

•

You can set the audio delay time between 0

msec and 250 msec. Adjust it to the optimal

setting.

| NOTE |

\

The audio delay time you specify may not be exact

depending on the played content.

Network

Network Status

Lets you check the current network and Internet

status.

Network Settings

Configure the network connection so you can

enjoy various features such as Internet services

or AllShare functionality, and perform Software

Updates.

Wi-Fi Direct

Lets you connect a Wi-Fi Direct device to the

product using a peer-to-pear network, without the

need for a wireless router.

Note that if the product is connected to a wireless

network, it may be disconnected when you use

Wi-Fi Direct.

| NOTE |

\

Text files, such as files with a .TXT or .DOC extension,

will not display when you are using the Wi-Fi Direct

function.

Multimedia Device Settings

Lets you control which devices on your network,

such as smart phones and tablets, can share

content with your product.

02465B-BD-H6500-ZC-ENG-.indd 17 2014-01-24 오후 12:19:35

18 English

Settings

Device Name

Lets you input a name for the product that will

identify it on your networks.

BD-Live Settings

Set various BD-Live functions. BD-Live allows you

to access extra features available on some Blu-ray

Discs if you are connected to the Internet.



BD-Live Internet Connection : Lets you fully

allow, partly allow, or prohibit a BD-Live Internet

connection.



BD Data Management :Manage BD data

downloaded from a BD-Live service or Blu-ray

Disc.

Smart Hub

Apps Settings

Lets you configure App notification settings and

view basic info about your Apps.



Push Notification Settings : Receive

notifications from selected services.



Properties : See basic info about Apps.

VOD Rating Lock

Lets you lock access to Video on Demand (VOD)

content based on its rating. To use, you must

enter the security PIN.

| NOTE |

\

Depending on your country, this menu function may

not be supported.

Terms & Policy

You must review and agree to both the App Terms

& Conditions and the privacy policy to use App

services.

Samsung account Terms and Conditions,

Privacy Policy

You can view and agree to the terms or privacy

policy for your Samsung account and a variety of

other services.

Reset Smart Hub

Resets all Smart Hub settings to their default

settings. To use, you must enter the security PIN.

System

Setup

Lets you re-run the Initial Settings procedure.

Quick Start

Lets you set the product to turn on quickly by

decreasing the boot time.

| NOTE |

\

If this function is set to On, Standby power

consumption will be increased.

Language

You can select the language you prefer for the On-

screen menu, disc menu, audio, subtitles, etc.

•

The language you select for the disc menu,

disc audio, or subtitles will only appear if it is

supported on the disc.

02465B-BD-H6500-ZC-ENG-.indd 18 2014-01-24 오후 12:19:35

19 English

04 Settings

Device Manager

You can connect a wireless USB keyboard or

mouse to the USB port on the front of the product.



Keyboard Settings : Lets you configure a

wireless USB keyboard connected to the

product.

| NOTE |

\

You can use the keyboard only when a QWERTY

keyboard screen or window appears in the Web

Browser.



Mouse Settings : Lets you configure a wireless

USB mouse connected to the product. You can

use the mouse in the product's menu and the

Web Browser in the same way you use a mouse

on your PC.

`

To use a mouse with the product's menu:

1. Connect the USB mouse to the product.

2. Click the primary button you selected

in Mouse Settings. The Simple Menu

appears.

3. Click the menu options you want.

| NOTE |

\

Some USB HID keyboards and mice may not be

compatible with your product.

\

Some HID keyboard keys may not work.

\

Wired USB keyboards are not supported.

\

Some applications may not be supported.

\

If a wireless HID Keyboard does not operate because

of interference, move the keyboard closer to the

product.

Security

The default security PIN is 0000. Enter the default

PIN to access the security function if you haven't

created your own PIN. After you have accessed

the security function for the first time, change the

PIN using the Change PIN function.



BD Parental Rating : Prevents playback of

Blu-ray Discs with a rating equal to or above

a specific age rating you have set unless you

enter the PIN.



DVD Parental Rating : Prevents playback of

DVDs with a rating above a specific numerical

rating you have set unless you enter the PIN.



Change PIN : Change the 4-digit PIN used to

access security functions.

`

If you forget your PIN:

1. Remove any disc or USB storage device.

2. Press and hold the

@

button on the top

panel for 5 seconds or more.

The initialization message appears on

the screen, and the power will turn off

automatically.

When you turn your product on again, all

the settings will be reset.

General

You can change the options listed below to match

your preferences.



Front Display : Change the brightness of the

front panel.



Time Zone : Select the time zone in which you

live.



Menu Transparency : Lets you adjust the

transparency of the menu box.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked

operations with other Samsung product that

have the Anynet+ feature and lets you control

those products with one Samsung TV remote.

To operate this function, you must connect this

product to an Anynet+ Samsung TV using an

HDMI cable.

02465B-BD-H6500-ZC-ENG-.indd 19 2014-01-24 오후 12:19:35

20 English

Settings

Support

Remote Management

When activated, lets Samsung Call Center agents

diagnose and fix problems with your player

remotely. Requires an active Internet connection.

| NOTE |

\

Remote Management service might not be available in

some countries.

\

To use Remote Management:

1) Call the Samsung Contact Center and ask for

remote support.

2) Open the player's menu on your TV and go to the

Support section.

3) Select Remote Management, and then read and

agree to the service agreements. When the PIN

screen appears, provide the PIN number to the

agent.

4) The agent accesses your player.

Software Update

The Software Update menu allows you to

upgrade the product's software for performance

improvements or additional services.

Contact Samsung

Provides contact information for assistance with

your product.

Reset

Resets all settings to their default settings except

for the network and Smart Hub settings, and then

starts the Setup function. To use, you must enter

the security PIN. The default security PIN is 0000.

Networks and the Internet

When you connect this product to a network,

you can use network based applications and

functions such as Smart Hub and BD-LIVE, and

upgrade the product's software through the

network connection. For more information about

accessing and using Internet services, see the

Network Services chapter of this manual on pages

37~45. Instructions for configuring the network

connection start below.

Configuring Your Network Connection

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, and you have a wired or wireless

network, we recommend using the Automatic

configuration procedures described below.

If you are connecting to a wired network, connect

the product to your router using a LAN cable

before you start the configuration procedure.

If you are connecting to a wireless network,

disconnect any wired network connection before

you begin.

To begin configuring your network connection,

follow these steps:

Wired Network

Ğ

Wired - Automatic

1. In the Home screen, select Settings, and

then press the

v

button.

2. Select Network, and then press the

v

button.

3. Select Network Settings, and then press the

v

button.

4. Select Wired in the Network Settings

screen, and then press the

v

button.

5. Select the Connect button, and then press

the

v

button. The product detects the wired

connection, verifies the network connection

and then connects to the network.

02465B-BD-H6500-ZC-ENG-.indd 20 2014-01-24 오후 12:19:35

La page charge ...

Samsung Blu-ray Player H6500 Manuel utilisateur

Ce manuel convient également à

Samsung Blu-ray Player H6500 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents