![](//vs1.manuzoid.fr/store/data-gzf/f697805be674f686a9fb7164420050d0/2/000444934.htmlex.zip/bg12.jpg)
Use this function when calling the Customer Call Centre and receive precise diagnosis when the
Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.
SMART FUNCTIONS (Only for Selected External Micom Models)
18
For appliances with the or logo
1. Close all refrigerator doors, and press and
hold display lock button to make it locked
state.
If the display has been looked for over 5
minutes, you must deactivate the look and then
reactivate it.
3. Open all refrigerator compartment and freezer
compartment doors and place the telephone
near the speaker hole at the top right side.
Check if the speaking side (microphone) of the
telephone is toward the speaker hole.
2. Press and hold fridge temperature button
for 3 seconds or longer.
(All display screens will be turned off, and in
a while, 3 will be displayed on the fridge
temperature display part.)
4. Do not take away the telephone while data is
being transmitted.
During the data transmission for smart diagnosis,
wait with the telephone placed near the speaker
hole at the top right side.
The remaining time for data transmission is
displayed on the display screen.
The transmission sound may be irritating. Do
not take away the telephone until the sound
stops for good diagnosis.
CAUTION
5. After the completion of the data transmission,
listen to the explanation of the consultant
about the result of the smart diagnosis.
When the data transmission is completed, along
with the display of the data transmission
completion, the refrigerator will be automatically
turned off and on a few seconds later.
Listen to the explanation of the consultant about
the result of the analyzed diagnosis and follow the
instructions.