1. Open all the doors of the refrigerator.
2. Press the refrigerator control (REF
TEMP) button for 3 sec or more.
3. If the buzzer sounds 4 times (Frequency
of SDS Buzzer is 2000Hz, 0.2sec Off/
0.2sec On 4 times) place the phone near
the speaker hole in the top right hand
side door hinge.
4. E n sur e t h e mi c r o p h o n e o f t h e
telephone is towards the speaker hole.
CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops for good diagnosis.
Smart diagnosis function is...
Use this function when calling the Customer Call Centre and receive precise diagnosis when the
Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.
How to use the function
Be aware!
Difference of the regional call qualities may have influence on the function.
If you use home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be successful if the call is made from a mobile phone
with poor network reception.
First, call LG service center. Only use the Smart Diagnosis feature when instructed to do so by the LG
call center agent.
5. Do not take away the telephone while
data is being transmitted.
6. During the data transmission for smart
diagnosis, hold the telephone 10cm
away from the speaker hole and avoid
any background noises. After inputting
SDS, SDS buzzer will ring. After
completion of the data transmission,
the consultant will explain the result of
the smart diagnosis and advice
a c c o r d i n g l y . W h e n t h e d a t a
transmission is completed, the
refrigerator will be automatically turned
off and on a few seconds later.
SMART DIAGNOSIS (Only for Selected Internal Micom Models)
Superchill
Ref.
Temp.
Cold Coldest
19