VTech VNT814 Manuel utilisateur

Go to

businessphones.vtech.com

to register your product for

enhanced warranty support and

the latest VTech product news.

User’s manual

VNT814

4-Port Ethernet Router

Congratulations

on your purchase of this VTech product. Before using this product, please read

the Important safety information.

This user’s manual provides you with the complete installation, setup and

operation instructions.

For customer service or product information, visit our website at

businessphones.vtech.com or call 1 (888) 370-2006.

Model number: VNT814

Type: 4-Port Ethernet Router

Serial number:

Purchase date:

Place of purchase:

Both the model and serial numbers of your VTech product can be found on the

bottom of the router.

Save your sales receipt and original packaging in case it is necessary to return

your router for warranty service.

i

Important safety information

When using your equipment, basic safety precautions should always be followed to

reduce the risk of fire, electric shock and injury, including the following:

Read and understand all instructions.

Do not use this product near water such as near a bath tub, wash bowl, kitchen

sink, laundry tub or a swimming pool, or in a wet basement or shower.

Do not place this product on an unstable table, shelf, stand or other unstable

surfaces.

CAUTION: Use only the adapters included with this product. Incorrect adapter

polarity or voltage can seriously damage the product.

Power adapter: Input 100-240V AC 200mA 50/60Hz; Output: 12V DC 500mA

The power adapters are intended to be correctly oriented in a vertical or floor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

For pluggable equipment, the socket-outlet shall be installed near the equipment

and shall be easily accessible.

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol

cleaners. Use a damp cloth for cleaning.

Do not cut off the power adapters to replace them with other plugs, as this causes a

hazardous situation.

Do not allow anything to rest on the power cords. Do not install this product where

the cords may be walked on or crimped.

This product should be operated only from the type of power source indicated on

the marking label. If you are not sure of the type of power supply in your home,

consult your dealer or local power company.

Do not overload wall outlets or use an extension cord.

This product should not be placed in any area where proper ventilation is not

provided. Slots and openings in the back or bottom of this product are provided for

ventilation. To protect them from overheating, these openings must not be blocked

by placing the product on a soft surface such as a bed, sofa or rug. This product

should never be placed near or over a radiator or heat register.

Never push objects of any kind into this product through the slots because they may

touch dangerous voltage points or create a short circuit. Never spill liquid of any

kind on the product.

To reduce the risk of electric shock, do not disassemble this product, but take it

to an authorized service facility. Opening or removing parts of the product other

than specified access doors may expose you to dangerous voltages or other risks.

Incorrect reassembling can cause electric shock when the product is subsequently

used.

Periodically examine all components for damage.

SAVE THESE INSTRUCTIONS

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

Important safety information

Electromagnetic fields (EMF)

This VTech product complies with all standards regarding electromagnetic fields (EMF).

If handled properly and according to the instructions in this user’s manual, the product is

safe to be used based on scientific evidence available today.

ii

Parts checklist

Your router package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

iii

Router

Power adapter

Ethernet cable

Abridged user’s

manual

iv

Table of contents

Getting started

Router overview ........................................1

Plan and connect your system .................3

Configure your computer network ............5

For Windows XP/2000 ...........................5

For Windows Vista/7/8 ..........................8

Configure your router

Login to the web management page ......11

Fast configuration ...................................12

Status .....................................................13

Device info ...........................................13

Statistics ..............................................14

Setup ......................................................15

WAN ....................................................15

LAN .....................................................16

Advanced ................................................19

Route ...................................................19

NAT .....................................................21

QoS .....................................................28

Port mapping .......................................30

Others ..................................................31

Service ....................................................33

IGMP ...................................................33

UPnP ...................................................34

DNS .....................................................34

DDNS ..................................................35

FTP server ...........................................36

Firewall ...................................................37

MAC filter .............................................37

IP/Port filter ..........................................38

URL filter .............................................39

ACL .....................................................40

DoS .....................................................41

Maintenance ...........................................42

Update .................................................42

Password .............................................46

Reboot .................................................48

Time ....................................................49

Log ......................................................50

Diagnostics ..........................................50

Appendix

Frequently asked questions ....................53

FCC part 15 ............................................54

For cETL compliance only ......................55

Limited warranty .....................................57

Technical specifications ..........................59

Index.......................................................60

1

Getting started

Router overview

e f g

h

d

b ca

1 – (On/Off) light

On when the router is powered on.

2 – WAN light

On when the WAN port is connected.

Flashes when the router receives data from the WAN port.

3 – L1 L2 L3 L4 lights

On when the corresponding LAN port is connected.

Flashes when the corresponding LAN port receives data.

•

2

e f g

h

d

b ca

4 – Power jack

Connects to the power adapter.

5 – (On/Off) button

Press to power on the router.

Press once again to power it off.

6 – LAN ports

Connect to Ethernet devices such as computers and SIP phones.

7 – WAN port

Connects to the wide area network.

8 – RESET button

Press and hold for five seconds to reset the router to default settings.

•

Getting started

Router overview

3

Getting started

Plan and connect your system

The VNT814 router has four LAN ports to connect with Ethernet devices such

as computers and SIP phones. Before you start setting up your system, plan it

carefully. Consider the following before you start planning your system.

Number of Ethernet device(s) you need to connect with.

Number of router(s) you need.

NOTES

Use only the adapter provided.

Make sure the electrical outlet is not controlled by a wall switch.

The adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are

not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

To power on, press button at the back of the router. The light will light up.

•

Connects to

Computer

Connects to

SIP Phone

Power

on/off

button

Connects

to power

Connects to the

internet via

Cable/DSL Modem

4

To connect more than four Ethernet devices, you can purchase additional

VNT814 router(s), and then connect them to the parent router. See the graphic

below for more details.

NOTES

Make sure you have connected all routers and devices before you power on any router or device.

Follow this sequence to power on the system: (1) Parent router, (2) Child routers, (3) other

Ethernet devices.

Child routers enter Auto Bridge Mode. All Ethernet devices obtain IP addresses from the parent

router directly.

•

Getting started

Plan and connect your system

Parent router

Child routers

(in Auto Bridge

Mode)

VNT814 Router

VNT814 Router VNT814 Router VNT814 Router VNT814 Router

SIP PhoneSIP PhoneComputer

Cable/DSL Modem

5

In order to view or change the settings of the VNT814 router, you need to login

to the web management page of the router. Before that, connect your computer

to the LAN port of the router, and then set the computer to obtain IP address

automatically according to the steps below.

For Windows XP/2000

Click Start, then open the Control Panel.

2. Double-click Network Connections.

1.

Getting started

Configure your computer network

6

Getting started

Configure your computer network

3. Right-click Local Area Connection, then select Properties.

4. Select Internet Protocal (TCP/IP), then click Properties.

7

Getting started

Configure your computer network

5. Select Obtain IP address automatically and Obtain DNS server address

automatically, then click OK.

8

Getting started

Configure your computer network

For Windows Vista/7/8

Click Start, then open the Control Panel.

2. Click Network and Internet, then Network and Sharing Center.

1.

9

3. Click Change adapter settings.

4. Right-click Local Area Connection, then select Properties.

Getting started

Configure your computer network

10

5. Select Internet Protocal Version 4 (TCP/IPv4), then click Properties.

6. Select Obtain an IP address automatically and Obtain DNS server

address automatically, then click OK.

Getting started

Configure your computer network

11

With your computer connected to the LAN port of the router and set to obtain

IP address automatically, power on the router and you can login to the web

management page to browse the router settings and change them if necessary.

TIP

Before you browse the web management page, check your browser’s network setting. Make sure

you do not use a proxy server for LAN setting.

Open a web browser on your computer.

Type http://192.168.1.1 in the address bar, then press Enter. The following

login page displays.

3. Enter the default user name and password as shown below. The user name

and password are case-sensitive.

User name Password

Administrative account admin admin12345

Normal user account user user1234

4. Click Login to enter the web management page of the router.

NOTE

Both administrative account and normal user account can view the router settings. To change the

settings, you must login using an administrative account.

•

1.

2.

•

Configure your router

Login to the web management page

12

Configure your router

Fast configuration

The Wizard feature can guide you through the basic configurations of the

router step by step.

Click the Wizard menu to start the fast configuration.

2. Select or input the information on the page as appropriate to configure the

WAN settings. Click Next to proceed.

3. Preview the settings and click Apply Changes to save the settings.

Otherwise, click Prev to return to the previous page or click Cancel to

cancel the fast configuration.

1.

13

Configure your router

Status

The Status menu allows you to view the information and statistics of the router.

Choose this menu and you can see the next sub-menus: Device info and

Statistics.

Device info

Router status:

Click the Status menu. The Router Status page under the Device info

sub-menu in the left pane is opened automatically, displaying the basic

information of the router, including system, LAN configuration, DNS status

and Ethernet WAN interfaces.

•

14

Statistics

Click the Statistics sub-menu. The page displays the packet statistics for

transmission and reception regarding network interface.

•

Configure your router

Status

La page charge ...

VTech VNT814 Manuel utilisateur

VTech VNT814 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents