YOTRIO Summerhill Outdoor Fire Table Assembly Instructions

Marque: YOTRIO

Modèle: Summerhill Outdoor Fire Table

Catégorie: Cheminées

Taper: Assembly Instructions

Product No. 085-1572-0

Model No. FHWS80023A

ASSEMBLY INSTRUCTIONS

Toll-free: 1-888-670-6684

IMPORTANT: Improper installation, adjustment, alteration, service or maintenance can

cause injury or property damage. Read the owner’s manual thoroughly before installing or

servicing this equipment. If the information in this manual is not followed exactly, re or

explosion may result causing property damage, personal injury or loss of life.

Keep this manual for future reference.

SUMMERHILL

OUTDOOR FIRE TABLE

USC

Made in China. Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

WARNING

For your safety: For outdoor use only (outside, non-enclosed

area). Do not use for cooking.

WARNING

e or

explosion may result causing property damage, personal injury

or loss of life.

WHAT TO DO IF YOU SMELL GAS

• Do NOT try lighting any appliance.

• Do NOT touch any electrical switch.

• Do NOT use any phone in your building.

• Immediately call your gas supplier from a neighbour’s phone.

• Follow the gas supplier’s instructions.

installer, service agency or gas supplier.

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

If you are assembling this unit for someone else, give this manual

to him or her to read and save for future reference.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

IMPORTANT SAFETY INFORMATION

This appliance complies with “ANSI Z21.97-2017/CSA 2.41-2017, Outdoor

Decorative Gas Appliances.”

Important Safety Information

Parts List

Assembly Preparations

Assembly

Operation

Cleaning and Maintenance

Troubleshooting

Warranty

Warning! Please read and understand this entire manual before

attempting to assemble, operate or install the product. Failure

to follow the dangers, warnings and cautions contained in this

instruction manual may result in a ﬁre or explosion causing

damage to property, serious bodily injury or death.

IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.

Product No. 085-1572-0 | Model No. FHWS80023A

IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY INFORMATION

WARNING

Improper installation, adjustment, alteration, service or

maintenance can cause injury or property damage.

Read the installation, operation and maintenance instructions

thoroughly before installing or servicing this equipment.

DANGER

If you smell gas:

1. Shut off gas to appliance.

3. If odour continues, keep away from the appliance and

explosion, which could cause property damage, personal injury,

or death.

DANGER

Do NOT leave this appliance unattended while it is in operation.

WARNING

For your safety:

liquids in the vicinity of this or any other appliance.

2. An LP-cylinder not connected for use shall not be stored in the

vicinity of this or any other appliance.

CARBON MONOXIDE HAZARD

• This appliance can produce carbon monoxide which

has no odour.

• Using it in an enclosed space can kill you.

• Never use this appliance in an enclosed space such as

camper, tent, car or home.

DANGER

IMPORTANT SAFETY INFORMATION

Product No. 085-1572-0 | Model No. FHWS80023A

rson. The

appliance should be inspected before use and at least annually

service person. More frequent cleaning may be required as necessary. It is

imperative that the control compartment, burners and circulating air passage-

ways of the appliance are kept clean.

WARNING

Failure to follow the dangers, warning and cautions in this manual may result in

serious bodily injury or death, or in a ﬁre or an explosion causing damage to

property.

IMPORTANT NOTICE

Read and understand all warnings and precautions prior to assembly and use of

your gas ﬁre table. Improper installation, adjustment, alteration, service or

maintenance can cause injury or property damage.

The installation of this unit must adhere to local codes or either the National

Fuel Gas Code, ANSI Z223. 1/NFPA54, or CAN/CGA-B149.1, Natural Gas and

Propane Installation Code.

Minimum Clearance from Unit to Combustible Materials:

61’’ (155.4 cm) from the top; 48’’ (121.9 cm) from all sides and back. Do not

locate this ﬁre table under any overhead enclosure.

IF YOU SMELL GAS

• Extinguish any open ﬂame.

• Do not try lighting any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbour’s phone.

• Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the ﬁre department.

Children and adults should be alerted to the hazards of high surface tempera-

table is not to be operated by children. Young children should be closely

ot hang or place

le. Any guard

or protective device removed for servicing the appliance shall be replaced

prior to operating the appliance.

• Keep these instructions for future reference. If you are assembling this unit for

someone else, give this manual to him or her to read and keep for future

reference.

• This gas ﬁre table must be used ONLY outdoors in a well-ventilated space and

shall NOT be used inside a building, garage, or any other enclosed area.

• DO NOT use this outdoor gas ﬁre table for indoor heating. TOXIC carbon

monoxide fumes can accumulate and cause asphyxiation.

• NEVER LEAVE this gas ﬁre table unattended when in use.

• This unit is to be used with propane gas only! (sold separately)

• Do not attach a remote gas supply to this unit.

• Only use propane gas for this unit.

• Converting this unit to natural gas is dangerous. This conversion kit shall be

installed by a qualiﬁed service agency in accordance with the manufacturer's

instructions and all applicable local, provincial and federal codes and requirements.

The maximum inlet natural gas pressure for this outdoor ﬁre table is

10 1/2” W.C.; the minimum inlet natural gas for this outdoor ﬁre table is 3 1/2”

W.C.

• Do not use a ﬂame to check for gas leaks.

• Do not store or use gasoline or other ﬂammable vapours and liquids within 25’

(7.62 m) of this or any other appliance.

• Do not store any combustible materials in the base enclosure.

• The use of alcohol, prescription or non-prescription drugs may impair an

individual’s ability to properly assemble or safely operate this outdoor ﬁre table.

• DO NOT use in an explosive atmosphere. Keep gas ﬁre table area clear and

free from combustible materials, gasoline and other ﬂammable vapours and

liquids.

• This outdoor ﬁre table is not to be installed or used in or on recreational vehi-

cles and/or boats.

• Always use in accordance with all applicable local, provincial and national

codes. Contact your local ﬁre department for details on outdoor burning.

WARNING FIRE TABLE IS FOR OUTDOOR USE ONLY

IMPORTANT SAFETY INFORMATION

Product No. 085-1572-0 | Model No. FHWS80023A

• Use the same precautions you would with any open ﬁre when using this

outdoor ﬁre table.

• DO NOT burn solid fuels such as: wood, charcoal briquettes, lump charcoal,

manufactured logs, driftwood, trash, leaves, paper, cardboard, plywood, or

painted, stained or pressure-treated wood in this outdoor ﬁre table.

• DO NOT paint or colour any part of this heating unit.

• DO NOT use this outdoor ﬁre table until it is COMPLETELY assembled and all

parts are securely fastened and tightened.

• DO NOT store another LP gas tank within 10’ (3.05 m) of this outdoor ﬁre table

while it is in operation.

• DO NOT use this outdoor ﬁre table near automobiles, trucks, vans or recreation-

al vehicles.

• DO NOT use this outdoor ﬁre table under any overhead structure or near any

unprotected combustible constructions.

• Avoid using near or under overhanging trees and shrubs.

• Always use this outdoor ﬁre table on a hard, level non-combustible surface such

as concrete, rock or stone. An asphalt or blacktop surface may not be acceptable

for this purpose.

• DO NOT use this outdoor ﬁre table if any part has been under water. Immedi-

ately call a qualiﬁed service technician to inspect the ﬁre table and to replace any

part or control system and any gas control which has been under water.

pletely cooled down.

• DO NOT use in windy conditions.

• Keep all electrical cords away from a hot outdoor ﬁre table.

• Certain areas of this outdoor ﬁre table when in use will become too hot to

touch. Do not touch hot surfaces until the unit has cooled unless you are wearing

protective gear such as insulated pot holders or heat-resistant gloves or mittens

to avoid burns.

• DO NOT attempt to move or store this outdoor ﬁre table until all parts are cool.

• DO NOT lean over this outdoor ﬁre table when lighting or when in use.

• Use only the regulator and hose assembly provided. The replacement regulator

and hose assembly shall be that speciﬁed by the manufacturer.

• DO NOT attempt to disconnect the gas regulator from the tank or any gas

ﬁtting while the outdoor ﬁre table is in use.

tank when the ﬁre table is not in use.

• DO NOT sit on the ﬁre table when the unit is in operation.

• DO NOT throw anything onto the ﬁre when the unit is in operation.

• Lava Rocks are very hot; please keep children or pets at a safe distance.

• It is essential to keep the outdoor ﬁre table valve compartment, burners, and

circulating air passages clean. Inspect outdoor ﬁre table before each use.

• Check for leaks after not using the unit for long periods of time.

• Prior to each ﬁre table operation, check the hose for evidence of excessive abra-

sion or wear by looking through the visual check hole. If the hose is damaged,

cracked or cut, it must be replaced before using the gas ﬁre table. The hose

assembly can only be replaced with a hose assembly speciﬁed by the manufacturer.

Please call the service centre at 1-888-670-6684.

•Before each use, remove the lava rocks. Examine the burner and its components. If

dirty, clean with a soft brush and soapy water solution. Also examine the area

around the burner. Any dirt or foreign material, such as spider webs or nests in this

area should be removed. If it is evident that the burner is damaged, the ﬁre table

must not be used. The burner assembly can not be replaced. Please contact the

service centre at 1-888-670-6684 for technical support.

• Place the hose out of the pathways where people may trip over it (if using external

tank). Do not place the hose in areas where it may be subjected to accidental

damage.

10 11

IMPORTANT SAFETY INFORMATION

Product No. 085-1572-0 | Model No. FHWS80023A

IMPORTANT SAFETY INFORMATION

ATTENTION: Any alteration of the outdoor ﬁre table that is not speciﬁcally

directed in the operations manual will void manufacturer warranty.

LP GAS

LP gas is ﬂammable and hazardous if handled improperly. Become aware of the

characteristics before using any LP gas product.

Propane Characteristics:

• Flammable, explosive under pressure, heavier than air and settles in pools in low

areas.

• In its natural state, propane has no odour. For your safety, an odourant has been

added.

• Contact with propane could burn your skin.

• Propane is extremely ﬂammable and hazardous if handled improperly.

LP GAS WARNINGS:

• Cylinders must be stored outdoors in a well-ventilated area out of reach of children.

• Disconnected cylinders must have threaded valve plugs tightly installed and must

not be stored in a building, garage or any other enclosed area.

• Never use a propane cylinder with a damaged body, valve, collar or footing.

• Dented or rusted propane cylinders may be hazardous and should be checked by

your propane gas supplier.

• Be sure to use only one 20 lb (9.1 kg) LP gas cylinder with a Type 1 valve with this

appliance as required by the American Natural Standards Institute (ANSI) and the

Canadian Standards Steering Committee.

• Only tanks marked “propane” may be used.

• The installation of this unit must adhere to local codes or either the National Fuel

Gas Code, ANSI Z223. 1/NFPA54, or CAN/CGA-B149.1, National Gas and Propane

Installation Code.

• LP gas tank must be arranged for vapour withdrawal.

• The LP gas tank must have a listed overﬁlling prevention device (OPD) and a QCCI

Type I (CGA810) LP gas tank connection.

• The LP gas tank must have a tank collar to protect the tank valve.

• Never use an LP gas tank with a damaged body, valve, collar, or footing. Dented or

rusted LP gas tanks may be hazardous.

• The LP gas tank should not be dropped or handled roughly.

• Tanks must be stored outdoors out of the reach of children. Do NOT store in a

building, garage, or any other enclosed area.

• Never store your LP gas tank where temperatures can reach over 125°F (52°C).

• Do not store the LP gas cylinder in direct sunlight or near a source of heat or

combustion.

• Never keep a ﬁlled LP gas tank in a hot car or car trunk. Heat will cause the gas

pressure to increase, which may open the relief valve and allow gas to escape.

• Place dust cap on valve outlet whenever the LP gas tank is not in use. Only

install the recommended type of dust cap on the LP gas tank and the LP gas tank

valve. Other types of caps or plugs may result in leakage of propane.

a. Do not store a spare LP gas cylinder under or near this appliance.

b. Never ﬁll the LP gas cylinder beyond 80% full.

c. If the information in (a) and (b) is not followed exactly, a ﬁre causing

death or serious injury may occur.

• LP gas cylinders should be ﬁlled only by a certiﬁed LP gas dealer.

• The pressure regulator is set for 11" W.C. (2.74 kPa).

• The maximum inlet propane gas pressure for this outdoor ﬁre table is 250 PSI;

the minimum inlet propane gas pressure for this outdoor ﬁre table is 25 PSI.

• Never attempt to attach this appliance to the self-contained LP gas system of a

camper trailer, motor home or house.

• Always use the pressure regulator and hose assembly provided with the appli-

ance to connect to a LP gas cylinder. Never connect to an unregulated LP gas

supply. For technical support contact the service centre at 1-888-670-6684.

• Hand turn the manual gas control valve. Never use tools. If the valve will not turn

by hand, do not try to repair it. Call a certiﬁed gas technician. The use of force or

any self-attempted repair may result in a ﬁre or explosion.

When connecting your gas cylinder:

Before connecting, be sure that there is no debris caught in the head of the gas

cylinder, head of the regulator valve or in the ports. Connect regulator valve and

hand-tighten ﬁrmly. Disconnect the propane cylinder from the regulator valve

when the ﬁre table is not in use. DO NOT obstruct the ﬂow of combustion air and

ventilation air to the burner.

PROPANE (LP) DANGERS AND WARNINGS

12 Product No. 085-1572-0 | Model No. FHWS80023A

1. This ﬁre table comes equipped with a standard LP gas hose and regulator

including the appliance side connection for a CGA No 791 Cylinder Connection

Device. The LP gas hose and regulator supplied with this ﬁre table must be used.

Only a hose and regulator speciﬁed by manufacturer can be used for replacement.

a. The CGA No 791 connection incorporates a magnetic ﬂow limiting device

that acts to limit the ﬂow of gas if a leak is detected between the regulator

and the burner valve.

b. If the burner valve is open prior to the LP gas cylinder service valve being

opened, the connection will interpret this free ﬂow of gas to be a leak.

c. The connection safety feature will reduce gas ﬂow from the regulator to

the appliance to a minimal level.

d. Be sure that the burner control valve is closed prior to opening the LP gas

cylinder service valve to ensure that the connection ﬂow limiting device is not

triggered mistakenly.

e. If the connection ﬂow limiting device is triggered mistakenly, close the LP

gas cylinder service valve and the burner valve, wait 10 seconds to allow the

device to reset, open the cylinder service valve, then open the burner valve

and light the ﬁreplace as per lighting instructions.

2. Be sure to protect the hose from any hot surfaces. Serious danger may result if the

hose contacts any hot surface.

3. Regular maintenance of the hose and regulator:

a. Inspect the hose before each use of the ﬁre table. If the hose shows signs

of cracks, abrasions, cuts or damage of any kind, do not operate the appli-

ance. Fix or replace the hose as required before using the appliance. For

assistance with repair or replacement of the hose, call the service centre at

1-888-670-6684. Use only replacement parts from the manufacturer.

b. Inspect the seal inside the CGA No 791 service valve on the LP gas cylinder

when replacing the cylinder or at least once per year. If there is any indication

of damage, have the seal replaced by a certiﬁed gas dealer before operating

the appliance.

4. Do not use tools to tighten the CGA No 791 connection nut onto the LP gas

cylinder service valve. Hand tighten only.

5. Be careful to not cross the threads on the connection when tightening the CGA No

791 connection onto the LP gas cylinder service valve.

6. “Leak Test” should always be performed after attaching the connection to the LP

gas cylinder service valve. (See “Checking for Leaks” section of this manual on Step

7, page 19.)

7. For the connection of the hose and regulator to the LP tank, refer to Step 5 on

page 18.

GLASS BEADS WARNING:

1. Glass media may have sharp edges. Wear safety glasses and gloves when handling.

2. Do not change or substitute the glass media material provided with this ﬁre pit. If

replacing, use only replacement glass media available from your local authorized

dealer/distributor.

3. Pour the glass media evenly in to the burner area (with the exception of the

screen—if applicable). The glass should be 1/2 to 1” (1.2 to 2.5 cm) above the burner.

4. IMPORTANT: Do not exceed a height of 1" (2.5 cm) above the burner when

placing glass media. Ensure no media covers the igniter screen. Store any excess glass

media in a safe location.

5. Keep away from the unit for the ﬁrst 20 minutes after igniting your unit for the ﬁrst

time, as lava rocks/pumice stones /glass beads could pop out and cause injury. Should

any media pop out, discard them.

6. Always ensure that lava rocks/pumice stones/glass shards/glass beads are

completely dry before use. Failure to do so will cause them to crack or pop.

IMPORTANT SAFETY INFORMATION

HOSE AND REGULATOR ASSEMBLY AND REPLACEMENT

DO NOT PLACE ANY

MEDIA ON SCREEN

IMPORTANT SAFETY INFORMATION

PARTS LIST

ASSEMBLY PREPARATIONS

1514 Product No. 085-1572-0 | Model No. FHWS80023A

2 people

WARNING! Please read and understand this entire manual before

attempting to assemble, operate or install the product. Failure

to follow the dangers, warnings and cautions contained in this

instruction manual may result in a ﬁre or explosion causing

damage to property, serious bodily injury or death.

Let us help you!

DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!

1-888-670-6684

If you have questions regarding your product, require warranty assistance,

or have damaged or missing parts, please call our customer service toll-free

helpline. Contact us for assistance; we're here to help.

IMPORTANT: Please read and understand this manual before any assembly. Before beginning

assembly of product, make sure all parts are present. Compare parts with packaging contents list.

If any part is missing, or if you have any questions, contact the service centre at

1-888-670-6684 (toll free).

Place all parts from the box in a cleared area and position them on the ﬂoor in front of you. Remove

all packing materials and place them back into the box. Do not dispose of the packing materials until

assembly is complete. Read each step carefully before beginning any assembly and make sure you

understand each step.

Needed for assembly:

Burner Lid - 1

Burner Bowl - 1 (pre-assembled)

Burner Ring - 1 (pre-assembled)

Pilot Housing - 1 (pre-assembled)

Switch Knob - 1 (pre-assembled)

Flame Igniter - 1 (pre-assembled)

Regulator/Hose - 1 (pre-assembled)

Base - 1

Glass Beads - 2 Boxes

Fabric Cover - 1

AAA Battery - 1

Table Top - 1

M6 nut

Φ24* Φ 8 .4*2.0 mm washer

FOR EASY ASSEMBLY,

DO NOT COMPLETELY

TIGHTEN BOLTS INTO

THE FRAME UNTIL ALL

BOLTS HAVE BEEN

INSERTED FOR THAT

PHASE OF ASSEMBLY.

Wrench

16 17

ASSEMBLY

Product No. 085-1572-0 | Model No. FHWS80023A

Step 2

Requires Pieces: A, H, I, L

Add the glass beads (I) to the ﬁre pit bowl. Ensure the pilot housing (D) is not

covered by the beads. Gently pull out the door using the knob. Place the lid (A) over

the burner bowl (B).

Step 1

Requires Pieces: H, L, AA, BB, CC

Place the granite table top (L) on a soft, ﬂat surface. Insert the bolt on the table

top (L) with the corresponding bolt holes on the base (H). Insert the Φ24*Φ8.4*2.0

mm washer (BB) and M6 nut (AA), tighten the nut using the wrench (CC). Turn the

table right way up.

Step 3

Requires Piece: H

Inserting LP Gas Tank

WARNING: Make sure LP gas tank valve is closed.

1. Loosen LP gas tank retainer bolt by turning counter-clockwise.

2. Place precision-ﬁlled LP gas tank upright into the hole of the ﬁreplace base so

the tank valve is facing the gas line connection.

3. Secure tank by turning LP gas tank retainer bolt clockwise until tight.

Note: Gas tank is sold separately.

Step 4

Requires Pieces: E, F, K

Insert the included battery (K) and switch knob (E) into the ﬂame igniter (K)

and twist the button cover on. Do not over-tighten.

WARNING: Battery may contain mercury. Do not throw battery into the ﬁre. Battery

must be disposed of and recycled properly as hazardous waste.

Step 5

Connecting LP Gas Tank

Requires Piece: G

Before connecting be sure there is no debris caught in the head of the LP gas tank,

head of the regulator valve or in the head of the burner or burner parts. Connect the

propane hose (G) to the gas tank by turning knob clockwise until it stops.

18 19

ASSEMBLY

Product No. 085-1572-0 | Model No. FHWS80023A

Step 7

Checking Burner Connections

1. Make sure the regulator hose and valve connections are securely fastened to the

burner and the tank.

2. Visually check the connection between the burner/venturi tube and oriﬁce.

3. Make sure the burner/venturi tube ﬁts over the oriﬁce.

4. Please refer to diagram (ﬁgure 1 and 2) for proper installation.

5. If the burner/venturi tube does not rest ﬂush to the oriﬁce, as shown

(ﬁgure 1 and 2), please contact 1-888-670-6684 for assistance.

Step 6

Disconnecting LP Gas Tank

Requires Piece: G

Before disconnecting the propane hose (G) make sure the LP gas tank valve is

"CLOSED." Disconnect the propane hose (G) from the LP gas tank by turning the

knob counter-clockwise until loose. Place the protective cap cover on LP tank

and store the tank outdoors in a well-ventilated area out of direct sunlight.

Caution: LP gas tank must be properly disconnected and removed prior to

moving this ﬁre table.

Checking for Leaks

WARNING

1. Before using this outdoor ﬁreplace, make sure you have read, understand

and are following all information provided in the “Important Safeguards” section.

2. Failure to follow those instructions can cause death, serious injury or property damage.

Step 8

Leak Test

1. Make 2-3 oz of leak detection solution by mixing one part liquid dishwashing

soap with three parts water.

2. Make sure control knob is in the “OFF” position.

3. Connect LP gas tank per “Installing LP Gas Tank” section.

4. Turn LP gas tank valve to “OPEN”.

5. Spoon several drops of solution, or use a squirt bottle, at all “X” locations (ﬁgure 1 and 2).

a. If any bubbles appear, turn LP gas tank valve to “CLOSED”, reconnect

and re-test.

b. If you continue to see bubbles after several attempts, turn LP gas tank

valve to “CLOSED” and disconnect LP gas tank, per “Disconnecting LP Gas

Tank”. Contact 1-888-670-6684 for assistance.

c. If no bubbles appear after one minute, turn LP gas tank valve to “CLOSED”,

wipe away solution and proceed.

WARNING: Failure to inspect this connection or not follow these instructions could cause a fire

or an explosion which can cause death, serious bodily injury or damage to property.

Figure 1 Figure 2

20 21

ASSEMBLY

Product No. 085-1572-0 | Model No. FHWS80023A

Step 9 Step 10

Requires Piece: J

After the ﬁre table cools down, place the protective cover (J) over the ﬁre table.

Warning: The cover must be removed when burner is in operation. Do not cover

this ﬁre table unless the ﬁre table is completely out and cool to the touch.

Installation: Check the item that is being covered for sharp corners that could

stress or tear the cover as it is pulled on.

Storage: To avoid any possibility of mildew, make sure the cover is completely

dry before you store it in an enclosed area, for a long period of time.

Carefully push back in the door.

Caution: To ensure proper function the screen on the pilot housing should

not be blocked with the glass beads.

OPERATION

2322 Product No. 085-1572-0 | Model No. FHWS80023A

OPERATION

8. Push in the switch knob and turn to the “ON” position. Keep holding down the

switch knob to allow gas to ﬂow for 20 seconds.

9. After 20 seconds, release and turn control knob counter-clockwise to adjust ﬂame

to desired height.

10. If ignition does not occur in 20 seconds turn burner switch knob to “OFF”, wait

ﬁve minutes, fan with a newspaper or magazine, and repeat lighting procedure.

11. If igniter does not light burner:

a. Wearing heat-resistant gloves, position a long, lit match or long, lit butane

lighter near the pilot housing.

b. Push and turn control knob to “ON”.

c. Remove match/lighter once burner is lit.

nt gloves, carefully

move the glass beads back to their proper, position, being careful to avoid the

12. After lighting, observe the burner ﬂame make sure all burner ports are lit and

ensure ﬂame height matches illustration.

CAUTION: If ignition does not occur in 5 seconds, turn control knob to “ OFF”,

wait 5 minutes, fan with a newspaper or magazine and repeat lighting procedure.

Turning off

1. Turn LP gas tank valve to “CLOSED”.

2. Turn control knob to the “OFF” position. Note: A “poof” sound is normal as the

last of the LP gas is burned.

3. Disconnect LP gas tank per Step 6 on page 18.

4. CAUTION: NEVER place cover on hot outdoor ﬁre place.

WARNING: NEVER light the burner

CAUTION: Keep outdoor gas appliance

area clear and free from combustible

vapours and liquids.

air.

CAUTION: Check and clean burner/venturi tubes for insects and insect nests. A

LIGHTING

1. Make sure all labels, packaging and protective ﬁlms have been removed from the

outdoor ﬁreplace.

2. Remove cover and burner lid (if applicable) before operating ﬁreplace. Check for

obstructions of airﬂow to the burner. Spiders, insects and webs can clog the

burner/venturi tube. A clogged burner tube can lead to a ﬁre.

3. Control knob must be in the “OFF” position.

4. To ensure proper function, the screen on the pilot housing should not be covered

by glass beads.

5. Connect LP gas tank per “Installing LP Gas Tank” section (step 5 on page 18).

6. Turn LP gas tank valve to “OPEN”.

7. Push and hold the ﬂame ignitor to create sparks within the electrode;

continue to hold.

15 1/2 to 26 1/2”

(40 to 67 cm)

PROPER FLAME HEIGHT

24 25

Product No. 085-1572-0 | Model No. FHWS80023A

CLEANING AND MAINTENANCE

Cleaning and Care

CAUTION:

1. All cleaning and maintenance should be done when outdoor ﬁreplace is cool

and with the fuel supply disconnected.

2. Do not clean any outdoor ﬁreplace part in a self-cleaning oven—the extreme

heat will damage the ﬁnish.

3. Do not enlarge valve oriﬁces or burner ports when cleaning the valves or

burners.

Notices

1. This outdoor ﬁreplace should be thoroughly cleaned and inspected on a regular

basis.

2. Abrasive cleaners will damage this product.

3. NEVER use oven cleaner to clean any part of this outdoor ﬁreplace.

Before Each Use

1. Keep the outdoor ﬁreplace area clear and free from any combustible materials,

gasoline and other ﬂammable vapours and liquids.

2. Do not obstruct the ﬂow of the combustion of LP gas and the ventilation of air.

3. Keep the ventilation opening(s) of the LP gas tank area free and clear of debris.

4. Visually check the burner ﬂames to make sure your outdoor ﬁre pit is working

properly.

5. See below for proper cleaning instructions.

6. Check all gas connections for leaks per Step 8 in Assembly section.

7. Check components for any signs of damage or rust.

8. Check for obstructions of airﬂow to the burner. Spiders, insects and webs can

clog the burner/venturi tube. A clogged burner/venturi tube can lead to a ﬁre.

9. If damage to any component is detected, do NOT operate until repairs are

completed.

Cleaning Surfaces

1. Wipe surfaces clean with mild dishwashing detergent or baking soda mixed

with water.

2. For stubborn stains, use a citrus-based cleaner and a nylon scrubbing brush.

3. Rinse clean with water.

4. Allow to air dry.

Before Storing

1. Turn LP gas tank valve to “CLOSED”.

2. Turn control knob to the “OFF” position. Note: A “poof” sound is normal as the

last of the gas is burned.

3. Disconnect LP gas tank per step 6 in Assembly section.

4. Clean all surfaces.

5. Lightly coat the burner with cooking oil to prevent excess rusting.

CAUTION: NEVER place cover on hot outdoor ﬁreplace.

6. If storing the outdoor ﬁreplace indoors, cover the outdoor ﬁreplace and store in a

cool, dry location away from children and pets.

7. If storing the outdoor ﬁreplace outdoors, cover the outdoor ﬁreplace with the

cover for protection from the weather.

26 27

Product No. 085-1572-0 | Model No. FHWS80023A

CLEANING AND MAINTENANCE

protect it from

the elements.

inter months.

It will protect it from cracking in extreme cold.

If it must be stored outside, it should ALWAYS be covered.

Replacement Parts

For replacement parts, contact the service centre at 1-888-670-6684

Product No. 085-1572-0 | Model No. FHWS80023A

28 29

TROUBLESHOOTING

Burner will not light using igniter

LP gas tank valve is closed

LP gas tank is low or empty

LP gas leak

Battery needs to be changed

Electrode and burners are wet

Electrode cracked or broken — sparks at crack

Wire loose or disconnected

Wire is shorting (sparking) between

igniter and electrode

Bad igniter

Make sure regulator is securely attached to the LP gas tank per

“Installing LP Gas Tank,” then turn LP gas tank valve to “OPEN”

1. Turn LP gas tank valve to “CLOSED”

2. Wait 5 minutes for gas to clear

3. Follow “Checking for Leaks” section

Replace the “A A” battery (follow assembly step for inserting battery)

Wipe dry with cloth

Replacement part(s) may be needed — contact Customer Care at

1-888-670-6684

Replacement part(s) may be needed — contact Customer Care at

1-888-670-6684

Replacement part(s) may be needed — contact Customer Care at

1-888-670-6684

Replacement part(s) may be needed — contact Customer Care at

1-888-670-6684

Check if LP gas tank is empty

w or

LP gas leak

1. Turn LP gas tank valve to “CLOSED”

2. Wait 5 minutes for gas to clear

3. Follow “Checking for Leaks” section

Coupling nut and regulator not fully connected Turn the coupling nut about one-half to three-quarters additional

turn until solid stop. Tighten by hand only — do NOT use tools

1. Clear burner/venturi tube

2. Check for bent or kinked hose

Disengagement of burner to valve Re-engage burner and valve

Spider webs or insect nest in burner/venturi tube Clean burner/venturi tube

Burner ports clogged or blocked Clean burner ports

LP gas tank is low or empty

Burner will not light with match

Product No. 085-1572-0 | Model No. FHWS80023A

30 31

Out of gas

may have been activated

1. Turn control knob to “OFF”

ing” section

device:

a. Turn control knob to “OFF”

b. Turn LP gas tank valve to “CLOSED”

c. Disconnect regulator

d. Turn control knob to “ON”

e. Wait one minute

f. Turn control knob to “OFF”

g. Reconnect regulator and leak check connections, being

careful not to fully open valve

New burner may have residual manufacturing oils

Spider webs or insect nest in burner/venturi tube

Clean burner/venturi tube

Poor alignment of valve to burner/venturi tube

Ensure burner/venturi tube is properly engaged with valve

not run the full length of burner

Flame is yellow or orange

Burner and/or burner/venturi tube is blocked Clean burner and/or burner/venturi tube

High or gusting winds

Low on LP gas

Flame goes out

Flame seems to lose heat when

burning in cold weather — tempera-

ture below 50°F (10°C)

Ice has built up on the outside of the LP gas

tank because the vapourization process is too

slow.

1. Turn off per “Turning Off” section

2. Replace with a spare LP gas tank

3. Reconnect LP gas tank per “Installing LP Gas Tank” section

4. Follow “Checking for Leaks” section

TROUBLESHOOTING

48 x 48 x 28”

122 x 122 x 71 cm

203 lb

92 kg

32 33

Product No. 085-1572-0 | Model No. FHWS80023A

SPECIFICATIONS

WARRANTY

This CANVAS product carries a one (1) year warranty against defects in

workmanship and materials. Trileaf Distribution agrees to replace a

defective product free of charge within the stated warranty period, when

returned by the original purchaser with proof of purchase. This product is

not guaranteed against wear or breakage due to misuse and/or abuse.

Dimensions (L x W x H)

Product weight

N° d'article : 085-1572-0

N° de modèle : FHWS80023A

TABLE À FOYER

D’EXTÉRIEUR

SUMMERHILL

INSTRUCTIONS D’ASSEMBLAGE

Numéro sans frais : 1 888 670-6684

IMPORTANT : Une installation, une adaptation, une altération, une réparation ou un

entretien incorrectes peuvent causer des blessures ou des dommages matériels.

Veuillez lire ce guide d'utilisation attentivement avant d’installer ou de réparer cet

appareil. Si les informations contenues dans ce guide ne sont pas suivies exactement,

un incendie ou une explosion peut entraîner causant des dommages matériels, des

blessures, voire la mort.

Gardez ce guide pour référence ultérieure.

USC

CONSIGNES DE SÉCURITÉ IMPORTANTES

AVERTISSEMENT

un entretien inappropriés peuvent être la cause de blessures ou

de dommages.

Veuillez lire attentivement les instructions d’installation, d’utilisa-

tion et d'entretien avant d'installer ou de réparer cet appareil.

QUE FAIRE SI VOUS SENTEZ UNE ODEUR DE GAZ :

• Ne tentez PAS d’allumer un appareil.

• Ne touchez PAS à un interrupteur; évitez d’utiliser un téléphone

dans votre bâtiment.

• Appelez immédiatement votre fournisseur de gaz au moyen du

téléphone d’un voisin.

• Suivez les directives du fournisseur de gaz.

• Si vous ne pouvez pas joindre votre fournisseur de gaz, appelez

le service d’incendie.

L’installation et l’entretien doivent être effectués par un installa-

Installateur : laissez ce guide avec l’appareil.

ultérieurement.

Si vous assemblez l’appareil pour une autre personne, remettez-lui

le présent guide pour qu’elle puisse le consulter ulté rieurement.

AVERTISSEMENT

Respectez scrupuleusement les directives du présent guide pour

prévenir les incendies et les explosions pouvant causer des

dommages matériels, des lésions corporelles ou la mort.

Fabriqué en Chine. Importé par Trileaf Distribution Trifeuil Toronto Canada M4S 2B8

N° d'article : 085-1572-0 I N° de modèle : FHWS80023A

CONSIGNES DE SÉCURITÉ IMPORTANTES

AVERTISSEMENT

POUR VOTRE SÉCURITÉ :

1. N'entreposez PAS et n'utilisez PAS d'essence ni tout autre

tout autre appareil.

2. Aucune bouteille de propane liquide non utilisée ne doit être

rangée à proximité de l'appareil ou de tout autre appareil.

AVERTISSEMENT

un entretien inadéquats peuvent causer des blessures ou des

dommages matériels.

Lisez attentivement le mode d'emploi et les instructions sur le

fonctionnement et l'entretien avant de procéder à l'installation

ou à l'entretien de l'équipement.

DANGER

S’il y a une odeur de gaz :

1. Coupez l’admission de gaz de l’appareil.

3. Si l'odeur persiste, éloignez-vous de l’appareil et appelez

immédiatement le fournisseur de gaz ou le service d’incendie.

Tout manquement à suivre ces instructions peut entraîner un

incendie ou une explosion qui pourrait causer des dommages

matériels, des blessures ou la mort.

DANGER

Ne laissez PAS l’appareil sans surveillance pendant qu’il est en

marche.

• Ne laissez PAS l’appareil sans surveillance pendant

qu’il est en marche.

• L'utilisation de cet appareil dans des espaces clos

peut entraîner la mort.

• N'utilisez jamais cet appareil dans un espace clos

comme un véhicule de camping, une tente, une

autombile ou une maison.

DANGER MONOXIDE DE CARBONE

La page charge ...

YOTRIO Summerhill Outdoor Fire Table Assembly Instructions

Marque: YOTRIO

Modèle: Summerhill Outdoor Fire Table

Catégorie: Cheminées

Taper: Assembly Instructions

Télécharger le PDF

rapport

dans d''autres langues

English: YOTRIO Summerhill Outdoor Fire Table

YOTRIO Summerhill Outdoor Fire Table Assembly Instructions

YOTRIO Summerhill Outdoor Fire Table Assembly Instructions

dans d''autres langues

Documents connexes

Autres documents