YOTRIO 5 Piece Motion Fire Chat Set Fire Pit Assembly Instructions

ITEM # 1260936

5-PC MOTION FIRE CHAT SET-FIREPIT

Style Selections

® is a registered trademark of LF, LLC.

# FHTS80021MODEL

WARNING

FOR YOUR SAFETY:

For Outdoor Use Only (outside, non-enclosed

area) Do Not Use For Cooking.

Installation and service must be performed by

a qualiﬁed installer, service agency, or the gas

supplier.

WARNING

FOR YOUR SAFETY:

If the information in this manual is not

followed exactly, a ﬁre or explosion may

result causing property damage, personal

injury or loss of life.

WHAT TO DO IF YOU SMELL GAS:

• Do NOT try lighting any appliance.

• Do NOT touch any electrical switch; do

NOT use any phone in your building.

• Immediately call your gas supplier from a

neighbor’s phone.

• Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call

the ﬁre department.

Installation and service must be performed

by a qualiﬁed installer, service agency or

gas supplier.

INSTALLER: Leave this manual with the

appliance. CONSUMER: Retain this manual

for future reference.

If you are assembling this unit for someone

else, give this manual to him or her to read

and save for future reference.

WARNING

FOR YOUR SAFETY:

Improper installation, adjustment,

alteration, service or maintenance can

cause injury or property damage.

Read the installation, operation and

maintenance instructions thoroughly before

installing or servicing this equipment.

DANGER

If you smell gas:

1. Shut off gas to appliance.

2.

Extinguish any open ﬂame.

3.

If odor continues, leave the area

immediately.

WARNING

FOR YOUR SAFETY:

1. Do NOT store or use gasoline or other

ﬂammable vapors or liquids in the vicinity of

this or any other appliance.

2. An LP-cylinder not connected for use shall

not be stored in the vicinity of this or any

other appliance.

4. After leaving the area, call your gas

supplier or ﬁre department.

Failure to follow these instructions could result

in ﬁre or explosion, which could cause property

damage, personal injury, or death.

CARBON MONOXIDE HAZARD

• This appliance can produce carbon monoxide which has

no odor.

• Using it in an enclosed space can kill you.

• Never use this appliance in an enclosed space such as a

camper, tent, car or home.

DANGER

1

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at

1-877-888-8225

, 8 a.m. - 8 p.m., EST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Table of Contents

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Propane (LP) Dangers And Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Hose & Regulator Assembly and replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Operating Instructions

........ . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Cleaning and Care ...... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Warranty and Replacement Parts List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

California Proposition 65:

This appliance complies with “ANSI Z21.97-2017-/CSA 2.41-2017, Outdoor Decorative Gas Appliances.”

This product can expose you to carbon monoxide, which is a combustion

Handling the brass material on this product can expose you to Lead, which

by product known to the State of California to cause cancer birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

is known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling. For more information go to www.P65Warnings.ca.gov.

Gas Conversion Kits are also available in Lowes.com

. . . . . . . . . . . . . . . . . .

. . . . . .

. . . . .

. . . . . . . . . . . .. . . . . . . . . . . .

DANGER

Do NOT leave this appliance unattended while

it is in operation.

Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

. . . . . .

.... . . . . . . . . . . . . . .

Troubleshooting

LB-WU-004472548

2

P ACKAGE CONTENTS

YTITNAUQ NOITPIRCSED PART YTITNAUQ NOITPIRCSED TRAP

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

Table Lid

Table Top

Side Panel A

Side Panel B

Side Panel C

Tank Base

Polyester Cover

Bottom Bowl

Burner Ring

Pilot Housing

Manual Electric Igniter

Control Knob

Regulator/Hose Assembly

1 1

1

2

3

4

5

6

7

8

9

11 12 13

14 15

16

Side Panel D

Lava Rocks

10

Battery

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with

this appliance may result in property damage or personal injury.

HARDWARE CONTENTS (not shown actual size)

WARNING FIRE TABLE IS FOR OUTDOOR USE ONLY

IMPORTANT SAFETY INFORMATION

WARNING Failure to follow the dangers, warning and cautions in this manual may result in serious bodily injury or death,

or in a fire or an explosion causing damage to property.

IMPORTANT NOTICE Read and understand all warnings and precautions prior to assembly and use of your gas fire table.

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage.

Note The use and installation of this product must conform to local codes. In the absence of local codes, use the National

Fuel Gas Code, ANSI Z223.1/NFPA54. Reference to Natural Gas and Propane Installation code CS A B149.1 or Propane

Storage and Handling code B149.2.

Minimum Clearance from Unit to Combustible Materials

65 in (165.1cm) from the top: 48 in (121.9cm) from all sides and back. Do not locate this fire table under any overhead enclosure.

IF YOU SMELL GAS

·Shut off gas supply to the fire table.

Extinguish any open flame.

Do not try lighting any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone.

Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

Keep these instructions for future reference. If you are assembling this unit for someone else, give this manual to him or

her to read and keep for future reference.

This gas fire table must be used ONLY outdoors in a well-ventilated space and shall NOT be used inside a building,

garage, or any other enclosed area.

DO NOT use this outdoor gas fire table for indoor heating. TOXIC carbon monoxide fumes can accumulate and cause

asphyxiation.

NEVER LEAVE this gas fire table unattended when in use.

·

Installation and repair should be done by a qualified service person. The appliance should be

inspected before use and at least annually by a qualified service person. More frequent cleaning

may be required as necessary. It is imperative that the control compartment, burners and circulating

air passageways of the appliance are kept clean.

Children and adults should be alerted to the hazards of high surface temperatures and be kept at a

safe distance while fire table is in use. This outdoor fire table is not to be operated by children.

Young children should be closely supervised when in the vicinity of this outdoor fire table.

Do not hang or place clothing or other flammable materials on or near the gas fire table.

Any guard or protective device removed for servicing the appliance shall be replaced prior to

operating the appliance.

This unit is to be used with propane gas & natural gas only (sold separately).

Do not use a flame to check for gas leaks.

·

3

M6 x 15 mm

Bolt

Qty. 4

Bolt

Qty. 1 Qty. 2 Qty. 1

AA BB CC DD

Washer

17

Allen Wrench

M6 x 25 mm

Bolt

Qty. 8

EE

Handle

FF

Qty. 1

IMPORTANT SAFETY INFORMATION (Continued)

Do not store or use gasoline or other flammable vapors an d liquids within 25 feet (7.62m) of this or any other appliance.

Do not store any combustible materials in the base enclosure.

·

• DO NOT use in an explosive atmosphere. Keep gas fire table area a clear and free from combustible materials, gasoline

and other flammable vapors and liquids.

• This outdoor fire table is not to be installed or used in or on recreational vehicles and/or boats.

• Always use in accordance with all applicable local, state and national codes. Contact your local fire department for details

on outdoor burning.

The use of alcohol, prescription or non-prescription drugs may impair an individual’s ability to properly assemble or

safely operate this outdoor fire table.

• Always use this outdoor ﬁre table on a hard, level non-combustible surface such as concrete, rock or stone. An asphalt or

• DO NOT use this outdoor ﬁre table if any part has been under water. Immediately call a qualiﬁed service technician to

and any gas control which has been under water.

•

• DO NOT lean over this outdoor ﬁre table when lighting or when in use.

• Use only the regulator and hose assembly provided. The replacement regulator and hose assembly shall be that speciﬁed by

the manufacturer.

• DO NOT attempt to disconnect the ga s regulator from the tank or any gas ﬁtting while the outdoor ﬁre table is in use.

• Always shut off the supply at the tank valve and disconnect regulator from the tank when the ﬁre table is not in use.

• DO NOT sit on the ﬁre table when the unit is in operation.

• DO NOT throw anything onto the ﬁre when the unit is in operation.

• Lava Rocks are very hot; please keep children or pets at a safe distance.

• It is essential to keep the outdoor ﬁre table valve compartment, burners, and circulating air passages clean. Inspect outdoor

ﬁre table before each use.

Prior to each ﬁre table operation, visually check the hose for evidence of excessive abrasion or wear.

If the hose is damaged, cracked or cut, it must be replaced before using the gas ﬁre table. The hose assembly

assembly speciﬁed by the manufacturer. Please call Lowes at 1-877-888-8225.

blacktop surface may not be acceptable for this purpose.

the ﬁre table and to replace any part or control system

DO NOT use in windy conditions.

•

Keep all electrical cords away from a hot outdoor fire table.

•

Certain areas of this outdoor fire table when in use will become too hot to touch. Do not touch hot surfaces until the unit has

cooled unless you are wearing protective gear such as insulated pot holders or heat resistant gloves or mittens to avoid burns.

DO NOT attempt to move or store this outdoor fire table until all parts are cool.

•

can only be replaced with a hose

• Before each use, remove the lava rocks. Examine the burner and its components. If dirty, clean with a soft brush and soapy

or foreign material, such as spider webs or nests in this

that the burner is damaged, the ﬁre table must not be used. The burner assembly

replaced. Please contact Lowes at 1-877-888-8225 for technical support.

• Place the hose out of the pathways where people may trip over it (if using external tank). Do not place the hose in

areas where it may be subjected

water solution. Also examine the area around the burner. Any dirt

area should be removed. If it is evident

can not be

to accidental damage.

• Use the same precautions you would with any open ﬁre when using this outdoor ﬁre table.

• DO NOT burn solid fuels such as: wood, charcoal briquettes, lump charcoal, manufactured logs, driftwood, trash, leaves,

wood in this outdoor ﬁre table.

• DO NOT use this outdoor ﬁre table until it is COMPLETELY assembled and all parts are securely fastened and tightened.

• DO NOT store another LP gas tank within 10 feet (3.05 m) of this outdoor ﬁre table while it is in operation.

• DO NOT use this outdoor ﬁre table near automobiles, trucks, vans or recreational vehicles.

• DO NOT use this outdoor ﬁre table under any overhead structure or near any unprotected combustible constructions.

paper, cardboard, plywood, painted or stained or pressure treated

Avoid using near or under overhanging trees and shrubs.

DO NOT paint or color any part of this heating unit.

•

Always remove protective cover before operating ( if applicable ).

DO NOT set the protective cover over the unit until it is turned off and completely cooled down.

•

Check for leaks after not using the unit for long periods of time.

•

inspect

•

ATTENTION: Any alteration of the outdoor ﬁre table that is not speciﬁcally directed in the operations manual will void

manufacturer warranty.

4

PROPANE (LP) DANGERS AND WARNINGS

LP GAS

LP gas is ﬂammable and hazardous if handled improperly. Become aware of the characteristics before using any LP gas product.

Propane Characteristics:

• Flammable, explosive under pressure, heavier than air and settles in pools in low areas.

• The LP gas supply tank must be constructed and marked in accordance with the Specifications for LP gas tanks of the U.S.

n (DOT) or the National standard of Canada, CAN/CSA-B339, LP gas tanks, Spheres and

es for the Transportation of Dangerous Goods.

• LP gas tank must be arranged for vapor withdrawal.

• The LP gas tank must have a listed overﬁlling prevention device (OPD) and a QCCI or Type I (CGA810) LP gas tank connection.

Department of Transportatio

Tub

• The LP gas tank must have a tank collar to protect the tank valve.

• Never use an LP gas tank with a damaged body, valve, collar, or footing. Dented or rusted LP gas tanks may be hazardous

supplier prior to use.

• The LP gas tank should not be dropped or handled roughly.

• Tanks must be stored outdoors out of the reach of children. Do NOT store in a building, garage, or any other enclosed area.

• Never store your LP gas tank where temperatures can reach over 125°F.

• Do not store the LP gas cylinder in direct sunlight or near a source of heat or combustion.

• Never keep a ﬁlled LP gas tank in a hot car or car trunk. Heat will cause the gas pressure to increase, which may open the

pe.

• Place dust cap on valve outlet whenever the LP gas tank is not in use. Only install the type of dust cap on the LP gas tank

the LP gas tank valve. Other types of caps or plugs may result in leakage of propane.

a. Do not store a spare LP gas cylinder under or near this appliance.

b. Never ﬁll the LP gas cylinder beyond 80% full.

c. If the information in (a) and (b) is not followed exactly, a ﬁre causing death or serious injury may occur.

• LP gas cylinders should be ﬁlled only by a certiﬁed LP gas dealer.

• The pressure regulator is set for 11 inches of water column ( pressure).

• Never attempt to attach this appliance to the self-contained LP gas system of a camper trailer, motor home or house.

• Always use the pressure regulator and hose assembly provided with the appliance to connect to a LP gas cylinder. Never

. For technical support contact Lowes at 1-877-888-8225.

• Hand turn the manual gas control valve. Never use tools. If the valve will not turn by hand, do not try to repair it. Call a

f force or any self attempted repair may result in a ﬁre or explosion.

Connecting your gas cylinder:

Before connection, be sure that there is no debris caught in the head of the gas cylinder, head of the regulator valve or in the

ports. Connect regulator valve and hand-tighten ﬁrmly. Disconnect the propane cylinder from

the regulator valve when the ﬁre table is not in use. DO NOT obstruct the ﬂow of combustion air and ventilation air to the

burner.

LP gas cylinder must contain a shut-off valve as specified in the standard for compressed gas cylinder valve outlet and inlet

and inlet connection, ANSI/CGA-V-1-1977, CSA B96.

and should be checked by your LP gas

relief valve and allow gas to esca

valve outlet that is provided with

connect to an unregulated LP gas supply.

Certiﬁed Gas Technician. The use o

head of the burner and burner

LP GAS WARNINGS:

• Cylinders must be stored outdoors in a well-ventilated area out of reach of children.

• Disconnected cylinders must have threaded valve plugs tightly installed and must not be stored in a building, garage or any

• Never use a propane cylinder with a damaged body, valve, collar or footing.

• Dented or rusted propane cylinders may be hazardous and should be checked by your propane gas supplier.

• Be sure to use only one 20 lb (9.1 kg) LP gas cylinder with a Type 1 valve with this appliance as required by the American

Steering Committee.

• Only tanks marked “propane” may be used.

other enclosed area.

National Standards Institute (ANSI) and the Canadian Standards

• In its natural state, propane has no odor. For your safety, an odorant has been added.

• Contact with propane could burn your skin.

• Propane is extremely ﬂammable and hazardous if handled improperly.

•

The maximum inlet propane gas pressure for this outdoor fire table is 250 psi.

•

The minimum inlet propane gas pressure for this outdoor fire table is 25 psi.

•

The maximum inlet natural gas pressure for this outdoor fire table is 10.5 inch w.c.

•

The minimum inlet natural gas for this outdoor fire table is 3.5 inch w.c.

5

CAUTION

6

CAUTION: After lighting - using a fireplace tool and heat-resistant gloves, carefully move the lava rocks back to

their proper position, being careful to avoid the flame.

CAUTION: If ignition does not occur in 5 seconds, turn control knob to “ OFF”, wait 5 minutes, fan with a

newspaper or magazine and repeat lighting procedure.

CAUTION:

1. All cleaning and maintenance should be done when outdoor fireplace is cool and with the fuel supply disconnected.

2. Do not clean any outdoor fireplace part in a self-cleaning oven, the extreme heat will damage the finish.

3. Do not enlarge valve orifices or burner ports when cleaning the valves or burners.

CAUTION: NEVER place cover on hot outdoor fire table.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 60 minutes

HOSE & REGULATOR ASSEMBLY AND REPLACEMENT

1. This ﬁre table comes equipped with a standard LP gas hose and regulator including the appliance side connection for a CGA

regulator supplied with this ﬁre table must be used. Only a hose

manufacturer can be used for replacement.

a. The CGA No 791 connection incorporates a magnetic ﬂow limiting device that acts

to limit the ﬂow of gas if a leak is detected

b. If the burner valve is open prior to the LP gas cylinder service valve being opened,

the connection will interpret this free ﬂow

c. The connection safety feature will reduce gas ﬂow from the regulator to the

appliance to a minimal level.

d. Be sure that the burner control valve is closed prior to opening the LP gas cylinder

service valve to ensure that the

mistakenly.

e. If the connection ﬂow limiting device is triggered mistakenly, close the LP gas

cylinder service valve and the burner valve,

reset, open the cylinder service valve, then open the burner valve and light the

ﬁreplace as per lighting instructions.

2. Be sure to protect the hose from any hot surfaces. Serious danger may result if the hose contacts any hot surface.

3. Regular maintenance of the hose and regulator:

a. Inspect the hose before each use of the ﬁre table. If the hose shows signs of

cracks, abrasions, cuts or damage of any

replace the hose as required before using the appliance. For assistance

or replacement of the hose, call Lowes at 1-877-888-8225. Use only

replacement parts from the

b. Inspect the seal inside the CGA No 791 service valve on the LP gas cylinder when

replacing the cylinder or at least once

damage, have the seal replaced by a certiﬁed gas dealer before operating the

appliance.

4. Do not use tools to tighten the CGA No 791 connection nut onto the LP gas cylinder service valve. Hand tighten only.

5. Be careful to not cross the threads on the connection when tightening the CGA No 791 connection on to the LP gas

6. “Leak Test” should always be performed after attaching the connection to the LP gas cylinder service valve. (See “Checking

for Leaks” section of this manual on page 11&13).

7. For the connection of the hose and regulator to the LP tank, refer to the “Connection” section of the LP gas cylinder section

above.

Lava Rock Warning:

1. Lava rocks may have sharp edges. Wear safety glasses and gloves when handling.

No 791 Cylinder Connection Device. The LP gas hose and

and regulator speciﬁed by

between the regulator and the burner valve.

of gas to be a leak.

connection ﬂow limiting device is not triggered

wait 10 seconds to allow the device to

kind, do not operate the appliance. Fix or

with repair manufacturer.

per year. If there is any indication of

cylinder service valve.

3. Pour the lava media evenly into the burner area (with the exception of the screen-if applicable). The lava should be

1/2-1 inch above the burner.

2. Do not change or substitute the lava rocks provided with this fire pit. If replacing, use only replacement lava media

available from your local authorized dealer/distributor.

5. Keep away from the unit for the first 20 minutes after igniting your unit for the first time, as lava rocks/pumice stones

could pop out and cause injury. Should any rocks pop out, discard them.

6. Always ensure that lava rocks/pumice stones/glass shards/glass beads are completely dry before use.

cause them to crack or pop.

4. IMPORTANT: Do not exceed a height of 1 inch above the burner when placing lavas media. Ensure no media covers

the igniter screen. Store any excess media in a safe location.

/glass shards/glass beads

Failure to do so will

DO NOT PLACE ANY

MEDIA ON SCREEN

7

ASSEMBLY INSTRUCTIONS

1.

Carefully place the top (2) upside down on a soft surface. Failure to do so

could result in damage or scratches to the tabletop. Attach the side panel B(4),

to the top (2). Use bolts (AA).

1

ATTENTION: Assembly is

easiest when you partially

tighten bolts at first. Only

tighten by hand.

2

ATTENTION: Assembly is

easiest when you partially

tighten bolts at first. Only

tighten by hand.

2. Attach the side panel A(3) to the top (2).

Use bolts (AA).

3

3. Attach the side panel C(5) to the leg of the side panel A(3) and side panel B(4).

Use bolts (BB).

4

4. Attach the tank base (7) to the side panel A(3) and side panel B(4) .

Use bolts (BB).

8

M6 x 15 mm Bolt

AA

Hardware Used

M6 x 25 mm Bolt

BB

Hardware Used

M6 x 15 mm Bolt

AA

M6 x 25 mm Bolt

AA

Hardware Used

x 2

x 4

AA

4

2

4 3

AA

BB

4 3

5

BB

3

4

5

ASSEMBLY INSTRUCTIONS

9

5.

Attach the side panel D(6) to the leg of side panel A(3).

Use bolt (CC) and washers (DD).

5

6

Attach the handle (FF) to the side panel D(6).

17 Washer

DD

7

7. Place lava rocks (9) in the burner bowl.

6.

CC

Bolt

Hardware Used

x 1

x 2

3

4

5

6

CC

DD

8

8. Place the lid (1) over the burner bowl.

9

FF

6

Hardware Used

Handle

FF

x 1

1

ASSEMBLY INSTRUCTIONS

10

9. Insert the included battery (10) and knob into the electric igniter and twist the

button cover on to igniter housing. Do not overtighten.

9

10

10. Place the polyester cover (8) in the burner bowl after finishing use.

8

WARNING: Batteries may contain

mercury. Do not put batteries into

the fire or trash. Please treat batteries

as hazardous waste and recycle

properly.

10

Installing LP Gas Tank

To operate, you will need one precision-filled

standard grill LP gas tank with external valve threads.

CAUTION: LP gas tank must be

properly disconnected and removed

prior to moving this

outdoor fireplace.

Inserting LP Gas Tank

WARNING: Make sure LP gas tank valve is closed.

1. Loosen LP gas tank retainer bolt by turning counter-clockwise.

2. Place precision-filled LP gas tank upright into hole in outdoor fireplace

base so the tank valve is facing the gas line connection..

3. Secure tank by turning LP gas tank retainer bolt clockwise until tight.

Connecting LP Gas Tank

1. Before connecting be sure there is no debris caught

head of the LP gas tank head of the regulator

valve or in the head of the burner or burner ports

2. Connect regulator/hose assembly to tank by turning

knob clockwise until it stops.

1.Before disconnecting make sure the LP gas tank

valve is “CLOSED”.

2. Disconnect regulator/hose assembly from LP gas

turning knob counterclockwise until it

CAUTION: LP gas tank must be

disconnected and removed

prior to moving this fire table.

3.Place the protective cap cover on the LP tank and store the

tank outdoors in a well ventilated area out of direct sunlight.

.

Checking for Leaks

WARNING: Before using this outdoor

fireplace, make sure you have read,

understand and are following

all information provided in the

“Important Safety Information” section

on page 2. Failure to follow those

serious,

injury

or property

Burner Connections

1. Make sure the regulator hose and valve connections are securely

2. Visually check the connection between the burner/venturi

3. Make sure the burner/venturi tube fits over the orifice.

WARNING: Failure to inspect this

instructions could

an explosion which can cause

4.

5. If the burner/venturi tube does not rest flush to the

orifice, as shown, please contact 1-877-888-8225 for

assistance.

Please refer to diagram for proper installation

Tank/Gas Line Connection

1. Make 2-3 oz

. of leak detection solution by

mixing one part liquid dishwashing soap with

three parts water.

2. Make sure control knobs are in the

“ OFF” position (Figure 3).

3. Connect LP gas tank per

“Installing LP Gas

Tank’’

4. Turn off the igniter cover and put the battery (10) inside according to the electrode (Figure 4)

5. Close the firepit door panel (Figure 5).

6. Turn LP gas tank valve to “OPEN ”.

7. Spoon several drops of solution or use a squirt

bottle, at all “X” locations (Figures 1 and 2).

Operating Instructions

Figure 1

Figure 2

20 lb

9 Kg

17.9 in. / 45.5 cm

12.2 in. / 31 cm

Step 1

Disconnecting LP Gas Tank

is loose.

LP Gas

Connection

11

in the

tank by

properly

cause death,

damage.

fastened to the burner and the tank.

tube and orifice.

or follow these

(Figures 1 and 2).

a. If any bubbles appear, turn LP gas tank valve to

“CLOSED”, reconnect and re-test.

b. If you continue to see bubbles after several attempts

turn LP gas tank valve to “CLOSED” and

disconnect LP gas tank, per

“Disconnecting LP Gas Tank”

Contact 1-877-888-8225 for assistance.

c. If no bubbles appear after one minute, turn LP gas

tank valve to “CLOSED”, wipe away solution

proceed.

a fire or

connection

cause

Lighting

WARNING: NEVER light the burner

with the cover on the outdoor

fireplace.

CAUTION: Keep outdoor gas

appliance area clear and free from

combustible materials, gasoline and

other flammable vapors and liquids.

CAUTION: Do NOT obstruct the

combustion and ventilation air.

CAUTION: Check and clean burner/venturi tubes for insects and insect

nests. A clogged tube can lead to a fire.

1. Make sure all labels, packaging and protective films have been removed from

flow of

the outdoor fireplace.

2. Check for obstructions of airflow to the burner. Spiders, insects and webs can

clog the burner/venturi tube. A clogged burner tube can lead to a fire.

3. Control knob must be in the “ OFF” position (Figure 3).

4. Clear small area of glass rocks away from the igniter cover (Figure 6).

5. Connect LP gas tank per “Installing LP Gas Tank” section.

6. Turn LP gas tank valve to “OPEN”.

7. Push and hold the electronic igniter to create sparks within the electrode,

continue to hold.

8. Push in the control knob and turn to the “ON” position, Keep holding down the

control knob to allow gas to flow for 20 seconds.

9. After 20 seconds, release and turn control knob counterclockwise to adjust flame

to desired height.

10. If ignition does not occur in 20 seconds turn burner control knob to “ OFF” wait

5 minutes, fan with a newspaper or magazine, and repeat lighting procedure.

11. Remove cover and lid from outdoor fireplace before lighting.

Figure 4

LP Gas Valve

with Oriﬁce

instructions can

OPERATING INSTRUCTIONS

Figure 6

Figure 7

15.7 in-26.7in

40-68cm

death, serious bodily injury or damage to property.

Figure 3

Figure 5

10

12. If igniter does not light burner:

:

.

Turning Off

Notices

Before Each Use:

a. Wearing heat-resistant gloves, position a long lit match or long lit butane lighter near the pilot housing.

b. Push and turn control knob to “ON ”

C. Remove match/lighter once burner is lit.

13. After lighting, observe the burner flame make sure all burner ports are lit and flame height matches illustration (Figure 7)

1. Turn LP gas tank valve to “ CLOSED”.

2. Turn control knob to the “ OFF” position. Note: A “poof” sound is normal as the last of the LP gas is burned.

3. Disconnect LP gas tank per “Disconnecting LP Gas Tank” section.

CAUTION:

1. All cleaning and maintenance should be done when outdoor fireplace is cool and with the fuel supply disconnected.

2. Do not clean any outdoor fireplace part in a self-cleaning oven, the extreme heat will damage the finish.

3. Do not enlarge valve orifices or burner ports when cleaning the valves or burners.

1. This outdoor fire table should be thoroughly cleaned and inspected on a regular basis.

2. Abrasive cleaners will damage this product.

fire table. roodtuo siht fo trap yna naelc ot renaelc nevo esu REVEN.3

1. Keep the outdoor fire table area clear and free from any combustible materials, gasoline and other flammable vapors

and liquids.

2. Do not obstruct the flow of the combustion of LP gas and the ventilation of air.

3. Keep the ventilation opening(s) of the LP gas tank area free and clear from debris.

4. Visually check the burner flames to make sure your outdoor fire table is working properly (Figure 7).

5. See below for proper cleaning instructions.

6. Check all gas connections for leaks.

7. Check components for any signs of damage or rust.

8. Check for obstructions of airflow to the burner. Spiders, insects and webs can clog the burner/venturi tube. A clogged

burner/venturi tube can lead to a fire.

9. If damage to any component is detected, do NOT operate until repairs are completed.

Cleaning Surfaces

Before Storing

1. Wipe surfaces clean with mild dishwashing detergent or baking soda mixed with water.

2. For stubborn stains, use a citrus-based cleaner and a nylon scrubbing brush.

3. Rinse clean with water.

4. Allow to air dry.

1. Turn LP gas tank valve to “CLOSED”.

2. Turn control knob to the “ OFF” position. Note: A “poof” sound is normal as the last of the gas is burned.

3. Disconnect LP gas tank per “Disconnecting LP Gas Tank” section.

4. Clean all surfaces.

5. Lightly coat the burner with cooking oil to prevent excess rusting.

6. If storing the outdoor fire table indoors, cover and store in a cool dry location away from children

and pets.

7. If storing the outdoor fire table outdoors, cover with the included cover for protection from

the weather.

OPERATING INSTRUCTIONS (CONTINUED)

CLEANING AND CARE

12

Cleaning your fire table top on a consistent and regular basis will help aid in a longer lasting top.

Cover your fire table with the included cover when not in use to protect it from the elements.

We recommend that your fire table be stored indoors during the winter months.

If it must be stored outside, it should ALWAYS be covered.

CARE AND MAINTENANCE

TROUBLESHOOTING

Troubleshooting

Problem Possible Cause Prevention/Cure

Burner will not light using igniter

LP gas tank valve is closed Make sure regulator is securely attached to the LP gas tank per “Installing

LP

LP gas tank is low or empty Exchange, refill or replace LP gas tank

LP gas leak

1. Turn LP gas tank valve to “CLOSED”

2. Wait 5 minutes for gas to clear

3. Follow “Checking for Leaks” section

Battery needs to be changed Replace the “AA A” battery (follow assembly step for inserting battery)

Electrode and burners are wet Wipe dry with cloth

Electrode cracked or broken - sparks at crack Replacement part(s) may be needed - contact Customer Care at 1-877-888-8225.

Wire loose or disconnected Reconnect wire or replacement part(s) may be needed - contact Customer Care

a

Wire is shorting (sparking) between igniter and electrode Replacement part(s) may be needed - contact Customer Care at 1-877-888-8225

Bad igniter Replacement part(s) may be needed - contact Customer Care a

Burner will not light with match

No gas flow

Check if LP gas tank is empty

a. If empty, exchange, reﬁll or replace LP gas tank

b. If LP gas tank is not empty, refer to “Sudden drop in gas ﬂow or

reduced ﬂame height” (see below)

LP gas tank is low or empty Exchange, refill or replace LP gas tank

LP gas leak 1. Turn LP gas tank valve to “CLOSED”

2. Wait 5 minutes for gas to clear

3. Follow “Checking for Leaks” section

Coupling nut and regulator not fully connected Turn the coupling nut about one-half to three-quarters additional turn until solid

stop. Tighten by hand only - do NOT use tools

Obstruction of gas flow 1. Clear burner/venturi tube

2. Check for bent or kinked hose

Disengagement of burner to valve Re-engage burner and valve

Spider webs or insect nest in burner/venturi tube Clean burner/venturi tube

Burner ports clogged or blocked Clean burner ports

Sudden drop in gas flow or

reduced flame height

Out of gas Exchange, refill or replace LP gas tank

Overfilling prevention device

may have been activated

1. Turn control knob to “ OFF”

2. Wait 30 seconds and light outdoor ﬁreplace per “Lighting” section

3. If ﬂames are still too low, reset the overﬁlling prevention device:

a. Turn control knob(s) “ OFF”

b. Turn LP gas tank valve to “CLOSED”

c. Disconnect regulator

d. Turn control knobs to (ON)

e. Wait one minute

f. Turn control knobs to “ OFF”

g. Reconnect regulator and leak check connections, being careful not to

fully open valve

h. Light outdoor ﬁreplace per “Lighting” section

Irregular flame pattern flame does

not run the full length of burner Burner ports are clogged or blocked Clean burner ports

Flame is yellow or orange

New burner may have residual manufacturing oils Burn outdoor fireplace for 15 minutes and re-inspect

Spider webs or insect nest in burner/venturi tube Clean burner/venturi tube

Poor alignment of valve to burner/venturi tube Ensure burner/venturi tube is properly engaged with valve

Flame goes out

High or gusting winds Do not use outdoor fireplace in high winds

Low on LP gas Exchange, refill or replace LP gas tank

Excess flow valve tripped Refer to “Sudden drop in gas flow or reduced flame height”

Flashback (fire in venturi/burner tube(s)) Burner and/or burner/venturi tube is blocked Clean burner and/or burner/venturi tube

Flame seems to lose heat when burning

in cold weather - temperature below 50ºF

Ice has built up on the outside of the LP gas

tank because the vaporization process is

1. Turn off per “Turning Off” section

2. Replace with a spare LP gas tank

3. Reconnect LP gas tank per “Installing LP Gas Tank” section

4. Follow “Checking for Leaks” section

5. Light outdoor ﬁreplace per “Lighting” section

too slow.

Gas Tank,” then turn LP gas tank valve to “OPEN”

t 1-877-888-8225

t 1-877-888-8225.

If you have any questions or problems, please call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday.

13

ONE-YEAR LIMITED WARRANTY

14

We warrant to the original end user purchaser that all aspects of this product will be free of defects in material and workmanship

for one (1) year from the date of purchase. If within the stated warranty period a product is found to be defective in material or

workmanship, the purchaser must contact the manufacturer's customer service department at 1-877-888-8225. The manufacturer,

This warranty does not apply: (a) to consumable parts, such as batteries or protective coatings that are designed to diminish over time,

unless failure has occurred due to a defect in materials or workmanship; (b) to cosmetic damage, including but not limited to scratches,

dents and broken materials unless failure has occurred due to a defect in materials or workmanship; (c) to damage caused by use with

a third party component or product that does not meet the manufacturer’s product specifications; (d) to damage caused by accident,

abuse, or misuse; (e) to damage caused by operating the product contrary to the published user manual(s); or (f) to a product that has

been modified to alter functionality or capability.

This warranty gives you specific legal rights, and you may also have the other rights that vary from state to state. As some

states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply.

at its option will repair or replace the defective parts. Replacements for any defective part will be supplied free of charge for

installation by the consumer. This warranty shall be effective from the date of purchase as shown in the purchaser’s receipt.

This warranty is valid for the original end user purchaser only and excludes coverage for industrial, commercial or business

use of the product, product damage due to shipment or failure which results from alteration, product abuse or product misuse.

We will not be responsible for labor charges and/or damage incurred in installation, repair or replacement, or for any special,

incidental or consequential damages, including, but not limited to, loss of use, loss of revenue, loss of actual or anticipated profits.

REPLACEMENT PARTS

For faster warranty service, please register your product immediately.

Please call 1-877-888-8225.

PRODUCT REGISTRATION

For replacement parts, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m.,

EST, Monday - Friday.

PART DESCRIPTION PART#

1

2

1260936-1

Table Lid

1260936-2

PART DESCRIPTION PART#

1260936-AA

1260936-CC

3

4

5

6

7

8

9

10

12

13

11

14

15

16

Control Knob

1260936-3

1260936-5

1260936-7

1260936-8

1260936-9

1260936-10

1260936-11

1260936-12

Pilot Housing

1260936-14

M6x 15 Bolt

Bolt

17 Washer

AA

BB

Tank Base

Polyester Cover

1260936-4

1260936-6

1260936-13

1260936-15

1260936-16

AA

CC

AA

DD 1260936-DD

1260936-EE

AA

CC

AA

DD

AA

EE

Side Panel A

Side Panel B

Side Panel C

Side Panel D

Lava Rocks

Battery

Bottom Bowl

Burner Ring

Manual Electric

Igniter

Regulator/

Hose Assembly

Allen

W rench

AA

Table Top

AA

EEE

M6 x 25 Bolt 1260936-BB

AA

BB

2

3

5

6

7

9

11 12

13

14

16

1

8

4

15

10

AA

FF 1260936-FF

Handle

AA

FF

15

ITEM # 1260936

5-PC MOTION FIRE CHAT SET -CHAIR

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

# FHTS80021

MODEL

Style Selections

® is a registered trademark of LF, LLC.

16

CHAIR OF CONTENTS

Package Contents...........................................................................................................................17

Hardware Contents..........................................................................................................................18

Safety Information. .........................................................................................................................18.

Preparation ....................................................................................................................................18

Assembly or Installation Instructions .............................................................................................19

Care and Maintenance ...................................................................................................................20

Warranty ........................................................................................................................................20

Replacement Parts List ................................................................................................................ . 20

17

P ACKAGE CONTENTS

1

Front Leg Connector

Single Seat

Left Leg 1

1

Back Leg Connector

PART ESCRIPTION

D QUANTITY

Single Seat

Right Leg

1

2

3

4

5

Single Seat Back

2

1

2

3

4

5

HARDWARE CONTENTS (not shown actual size)

M6 x 15 mm

Bolt

Qty. 16

Qty. 8

Qty. 1

AA GG HH EE

Allen Wrench

M6 x 35 mm

Bolt

Qty. 16

M6 x 25 mm

Bolt

Estimated Assembly Time: 40 minutes

Tools Required for Assembly (included): Wrench

PREPARATION

• Repeated assembly can weaken the locking abitlity of the washers. Periodically check all bolted

connections on the furniture to make sure they are tight and secure. Retain these instructions for

future reference.

• Do NOT overtighten any of the bolts as this may damage the threads.

Tighten each bolt ﬁrmly and

properly.

• Paint on this product might peel off if it is hit or used improperly. Use and carry it with care and apply

touch-up paint (not included) when necessary.

• Some parts may contain sharp edges. Wear protective gloves as necessary.

• This outdoor furniture is designed and made for personal non-commercial use. It should not be used

as a toy or a tool. Children under the age of 16 should not be engaged in the assembly, removal or

disassembly . Children under the age of 10 should be supervised by a competent adult

furniture.

Please read and understand this entire manual before attempting to assemble or install

the product.

of the product

while using this

Before beginning assembly of product, make sure all parts are present. Compare parts with the package

contents and the hardware contents list. If any part is missing or damaged, do not attempt to assemble

the product.

18

IMPORTANT SAFETY INFORMATION

19

1.

Carefully place the chair side on a soft surface. Then attach

the chair right leg (2) to the right seat tube of the chair.

Attach the front leg connector (4) to the right leg (2), attach the

back connector (5) to the right leg (2). Use bolts (AA) and (GG).

2.

3

3 Tighten the bolts (HH) to the two sides of back leg connectors..

Use bolts (HH).

M6 x 15 mm Bolt

AA

Hardware Used

M6 x 25 mm Bolt

HH

Hardware Used

x 2

ASSEMBLY INSTRUCTIONS

Hardware Used

M6 x 15 mm Bolt

AA

x 2

M6 x 35 mm Bolt

GG

x 2

Carefully place the chair side on a soft surface. Then attach

the chair left leg (3) to the left seat tube of the chair.

Attach the front leg connector (4) to the left leg (3), attach the

back connector (5) to the left leg (3). Use bolts (AA) and (GG).

M6 x 35 mm Bolt

GG

x 2

HH

1

GG

AA

GG

4

1

2 5

2

GG

AA

GG

1

4

3

5

REPLACEMENT PARTS LIST

• Before using, clean the product completely with a soft, dry towel.

• When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water, and

rinse dry completely. Do not use strong detergents or abrasive cleaners.

• Store the product in a cool, dry location away from sunlight.

CARE AND MAINTENANCE

This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item

provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free

from defects in material or workmanship for a period of one (1) year on frame. We don't reimburse for transportation or

delivery costs, or compensate the individual or any outside party for assembling or disassembling the product.

Exclusions:

Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,

vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered Proof of purchase

(dated register receipt) is required for warranty claims.

Warranty is to the original purchaser and is

non-transferable. Any replacement of warranted items will

be in the original style and color, or a similar style

and color if the original is unavailable or has been

discontinued.

ONE-YEAR LIMITED WARRANTY

For replacement parts, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m.,

EST, Monday - Friday.

Front Leg Connector

Single Seat

Left Leg

Back Leg Connector

PART ESCRIPTION

D PART #

Single Seat

Right Leg

Single Seat Back

1260936-1

1260936-2

1260936-3

1260936-4

1260936-5

2

3

4

1

2

3

4

5

M6 x 15 mm

Bolt

Qty. 16

Qty. 8

Qty. 1

AA GG HH EE

Allen Wrench

M6 x 35 mm

Bolt

Qty. 16

M6 x 25 mm

Bolt

20

1

5

La page est en cours de chargement...

YOTRIO 5 Piece Motion Fire Chat Set Fire Pit Assembly Instructions

YOTRIO 5 Piece Motion Fire Chat Set Fire Pit Assembly Instructions

dans d''autres langues

Documents connexes

Autres documents