Oracle ES1-24 Product Notes

Marque: Oracle

Modèle: ES1-24

Catégorie: Commutateurs réseau

Taper: Product Notes

Oracle

Switch ES1-24 Product Notes

Part No: E39113-08

November 2016

Oracle Switch ES1-24 Product Notes

Part No: E39113-08

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except

as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform,

publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is

prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS. Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered

to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As

such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or

documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous

applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all

appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this

software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of

SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered

trademark of The Open Group.

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are

not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement

between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content,

products, or services, except as set forth in an applicable agreement between you and Oracle.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?

ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Référence: E39113-08

Ce logiciel et la documentation qui l’accompagne sont protégés par les lois sur la propriété intellectuelle. Ils sont concédés sous licence et soumis à des restrictions d’utilisation et

de divulgation. Sauf stipulation expresse de votre contrat de licence ou de la loi, vous ne pouvez pas copier, reproduire, traduire, diffuser, modifier, accorder de licence, transmettre,

distribuer, exposer, exécuter, publier ou afficher le logiciel, même partiellement, sous quelque forme et par quelque procédé que ce soit. Par ailleurs, il est interdit de procéder à toute

ingénierie inverse du logiciel, de le désassembler ou de le décompiler, excepté à des fins d’interopérabilité avec des logiciels tiers ou tel que prescrit par la loi.

Les informations fournies dans ce document sont susceptibles de modification sans préavis. Par ailleurs, Oracle Corporation ne garantit pas qu’elles soient exemptes d’erreurs et vous

invite, le cas échéant, à lui en faire part par écrit.

Si ce logiciel, ou la documentation qui l’accompagne, est livré sous licence au Gouvernement des Etats-Unis, ou à quiconque qui aurait souscrit la licence de ce logiciel pour le

compte du Gouvernement des Etats-Unis, la notice suivante s’applique:

U.S. GOVERNMENT END USERS. Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered

to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As

such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or

documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Ce logiciel ou matériel a été développé pour un usage général dans le cadre d’applications de gestion des informations. Ce logiciel ou matériel n’est pas conçu ni n’est destiné

à être utilisé dans des applications à risque, notamment dans des applications pouvant causer des dommages corporels. Si vous utilisez ce logiciel ou matériel dans le cadre d’

applications dangereuses, il est de votre responsabilité de prendre toutes les mesures de secours, de sauvegarde, de redondance et autres mesures nécessaires à son utilisation dans des

conditions optimales de sécurité. Oracle Corporation et ses affiliés déclinent toute responsabilité quant aux dommages causés par l’utilisation de ce logiciel ou matériel pour ce type

d’applications.

Oracle et Java sont des marques déposées d’Oracle Corporation et/ou de ses affiliés. Tout autre nom mentionné peut correspondre à des marques appartenant à d’autres propriétaires

qu’Oracle.

Intel et Intel Xeon sont des marques ou des marques déposées d’Intel Corporation. Toutes les marques SPARC sont utilisées sous licence et sont des marques ou des marques

déposées de SPARC International, Inc. AMD, Opteron, le logo AMD et le logo AMD Opteron sont des marques ou des marques déposées d’Advanced Micro Devices. UNIX est une

marque déposée d’The Open Group.

Ce logiciel ou matériel et la documentation qui l’accompagne peuvent fournir des informations ou des liens donnant accès à des contenus, des produits et des services émanant de

tiers. Oracle Corporation et ses affiliés déclinent toute responsabilité ou garantie expresse quant aux contenus, produits ou services émanant de tiers, sauf mention contraire stipulée

dans un contrat entre vous et Oracle. En aucun cas, Oracle Corporation et ses affiliés ne sauraient être tenus pour responsables des pertes subies, des coûts occasionnés ou des

dommages causés par l’accès à des contenus, produits ou services tiers, ou à leur utilisation, sauf mention contraire stipulée dans un contrat entre vous et Oracle.

Accessibilité de la documentation

Pour plus d’informations sur l’engagement d’Oracle pour l’accessibilité à la documentation, visitez le site Web Oracle Accessibility Program, à l’adresse http://www.oracle.com/

pls/topic/lookup?ctx=acc&id=docacc.

Accès aux services de support Oracle

Les clients Oracle qui ont souscrit un contrat de support ont accès au support électronique via My Oracle Support. Pour plus d’informations, visitez le site http://www.oracle.com/

pls/topic/lookup?ctx=acc&id=info ou le site http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs si vous êtes malentendant.

Contents

Using This Documentation ................................................................................. 7

Product Documentation Library ......................................................................... 7

Feedback ....................................................................................................... 7

Late-Breaking Information .................................................................................. 9

Documentation Reading Order .......................................................................... 9

New Features ................................................................................................ 10

Logical Link Aggregation ....................................................................... 10

Edge Virtual Bridging ............................................................................ 10

IEEE DCBX ......................................................................................... 11

In-Band Management ............................................................................. 11

Reflective Relay .................................................................................... 11

Port Mirroring ...................................................................................... 11

Uplink Port Trailing ............................................................................... 12

VRRPv3 .............................................................................................. 12

Oracle ILOM 3.0 Updates ....................................................................... 12

Upgrading the Switch Firmware ....................................................................... 12

▼ Back Up the Current Configuration Before Upgrading ............................. 12

▼ Download the Switch Firmware Package .............................................. 14

▼ Install the Switch Firmware ............................................................... 15

Configuring the Switches ................................................................................ 17

▼ Configure 1 Gbps Mode on SFP+ Interfaces ......................................... 18

▼ Configure Speed on the 10GBASE-T Interfaces ..................................... 18

▼ Fine Tune the VLAN Setup ............................................................... 19

Configuring In-Band Management ............................................................ 23

Managing SEFOS Configurations ............................................................. 25

Configuring TACACS+ .......................................................................... 27

Known Issues ............................................................................................... 29

Contents

SSL V3.0 POODLE DISABLE SSL V3 (19842504) .................................... 29

Switch Might Get Stuck at uboot on SSD Related Error (16922931) ............... 30

Loss of Access to Management Node Oracle ILOM When Starting or Resetting

the System (16893765) ........................................................................... 30

CPU Hang on Power Up (16822073) ........................................................ 30

slb_lla: Long Time to Report Correct Status When the Link Is Down or Up

(16424341) ........................................................................................... 31

6 Oracle Switch ES1-24 Product Notes • November 2016

Using This Documentation

■

Overview – Provides late-breaking information about Oracle Switch ES1-24

■

Audience – Technicians, system administrators, and authorized service providers

■

Required knowledge – Advanced experience troubleshooting and replacing hardware

Product Documentation Library

Documentation and resources for this product and related products are available at http://www.

oracle.com/goto/es1-24/docs.

Feedback

Provide feedback about this documentation at http://www.oracle.com/goto/docfeedback.

Using This Documentation 7

8 Oracle Switch ES1-24 Product Notes • November 2016

Late-Breaking Information

These product notes provide important late-breaking information and instructions for upgrading

the firmware to the latest version.

■

“Documentation Reading Order” on page 9

■

“New Features” on page 10

■

“Upgrading the Switch Firmware” on page 12

■

“Configure 1 Gbps Mode on SFP+ Interfaces” on page 18

■

“Configure Speed on the 10GBASE-T Interfaces” on page 18

■

“Fine Tune the VLAN Setup” on page 19

■

“Configuring In-Band Management” on page 23

■

“Managing SEFOS Configurations” on page 25

■

“Configuring TACACS+” on page 27

■

“Known Issues” on page 29

Documentation Reading Order

All of the switch product documentation and related documentation can be found at: http://

www.oracle.com/goto/es1-24/docs

Read the documentation in this order.

Step Document Title or Type Information Provided

1. Oracle Switch ES1-24 Product Notes Late-breaking information, supported configurations, and

system limitations.

2. README files Located in the download package, lists of corrected issues

and special instructions for applying patches.

3. Oracle Switch ES1-24 Configuration Guide Software configuration instructions.

4. Oracle Switch ES1-24 Service Manual Removal and installation of replaceable parts.

5. Administration Guides Reference and administration information for the software.

Late-Breaking Information 9

New Features

Step Document Title or Type Information Provided

6. Sun Ethernet Fabric Operating System CLI Base Reference

Manual CLI Base Reference Manual

Base command descriptions, examples, and reference

information.

7. Sun Ethernet Fabric Operating System CLI Enterprise

Reference Manual CLI Base Reference Manual

Enterprise command descriptions, examples, and reference

information.

New Features

These new features are supported for this release:

■

“Logical Link Aggregation” on page 10

■

“Edge Virtual Bridging” on page 10

■

“IEEE DCBX” on page 11

■

“In-Band Management” on page 11

■

“Reflective Relay” on page 11

■

“Port Mirroring” on page 11

■

“Uplink Port Trailing” on page 12

■

“VRRPv3” on page 12

■

“Oracle ILOM 3.0 Updates” on page 12

Logical Link Aggregation

Logical Link Aggregation (LLA) is a Layer 2 feature providing the aggregation of links from

a server connected to two physical switches resulting in increased redundancy and capacity.

LLA is supported when the switch is running a Layer 2 configuration. LLA is also supported in

Layer 3 configurations, starting with 1.3.1.9.

Refer to the Sun Ethernet Fabric Operating System LLA Administration Guide for more

information.

Edge Virtual Bridging

Edge Virtual Bridging enables the coordination of configuration and management of a

virtualized networking environment between an end station running Oracle Solaris and the

external SEFOS bridge.

Refer to the Sun Ethernet Fabric Operating System EVB Administration Guide for more

information.

10 Oracle Switch ES1-24 Product Notes • November 2016

New Features

IEEE DCBX

Data center bridging (DCB) Ethernet enhancements are available to improve Ethernet

networking and management in data center environments. DCB is a framework that defines

the enhancements that are required for switches and endpoints. DCB includes the following

features:

■

PG, also known as ETS, which is a priority grouping specification that provides bandwidth

management as well as a scheduling algorithm for various traffic classes on a converged

link.

■

PFC, which is an enhancement to the existing Ethernet-pause protocol, that enables 0-drop

packet delivery for certain traffic classes.

This release of the SEFOS DCB feature supports DCB version 1.0.1 and IEEE DCBX as

specified by the DCB task group.

Refer to the Sun Ethernet Fabric Operating System IEEE DCBX Administration Guide for more

information.

In-Band Management

In-band configuration mode on the switch enables access to the switch's Oracle ILOM interface

from one of the 24 10 GbE in-band ports.

See “Configuring In-Band Management” on page 23.

Reflective Relay

Reflective relay enables the packet from a device to be returned back from the same

downstream port that delivered the packets. The most common use case is when the same

interface is used to transmit and receive packets. This usage can be seen while using Virtual

Ethernet Packet Aggregation (VEPA).

Refer to the Sun Ethernet Fabric Operating System CLI Base Reference Manual for more

information.

Port Mirroring

Port mirroring enables forwarding a copy of a packet received on one interface (source) to

another interface (destination) on the same switch.

Late-Breaking Information 11

Upgrading the Switch Firmware

Refer to the Sun Ethernet Fabric Operating System Port Mirroring Administration Guide for

more information.

Uplink Port Trailing

The Uplink Port Trailing feature monitors the state of the uplink port and manages the downlink

ports according to the state of the uplink port. When the uplink goes down, the downlink ports

are shut down, providing the HA feature with the feedback it needs to switch over to alternate

link or path. For more details, refer to the Uplink Trailing Administration Guide.

VRRPv3

VRRPv3 (VRRP version 3) extends capability to IPv6 in addition to IPv4. Version 3 supports

subsecond operation. VRRPv3 also supports accept-mode configuration. For more details, refer

to the VRRPv3 Administration Guide.

Oracle ILOM 3.0 Updates

Support for Fault Management Architecture (FMA) for environmental monitoring and fault

management.

Upgrading the Switch Firmware

■

“Back Up the Current Configuration Before Upgrading” on page 12

■

“Download the Switch Firmware Package” on page 14

■

“Install the Switch Firmware” on page 15

Back Up the Current Configuration Before

Upgrading

Save the current configuration to a remote site before upgrading the software. Refer to the

Oracle Switch ES1-24 Configuration Guide for additional information.

12 Oracle Switch ES1-24 Product Notes • November 2016

Back Up the Current Configuration Before Upgrading

You can also use the backup and restore feature from Oracle ILOM to save the current

Oracle ILOM and SEFOS configurations to a remote server. You can then restore the switch

configuration after upgrading the firmware. See “Include the SEFOS Configuration in

Backups” on page 25.

Note - During the upgrade, if you answer yes to the question Preserve existing

configuration (y/n)?, the Oracle ILOM and SEFOS configurations are automatically

preserved. There is no need to explicitly restore the configuration.

Configure the default IP address.

Enter Global Configuration mode.

SEFOS# configure terminal

Configure the default IP address and subnet mask as 10.0.0.100 and

255.255.0.0.

SEFOS(config)# default ip address 10.0.0.100 subnet-mask 255.255.0.0

Exit Global Configuration mode.

SEFOS(config)# end

Configure the restoration file name.

Enter Global Configuration mode.

SEFOS# configure terminal

Configure a configuration restoration file name.

SEFOS(config)# default restore-file myconfig.conf

Exit Global Configuration mode.

SEFOS(config)# end

Late-Breaking Information 13

Download the Switch Firmware Package

Save the current configuration for restoration.

SEFOS(config)# write startup-config

Copy the configuration file to a remote location.

SEFOS(config)# copy startup-config tftp://12.0.0.100/switch.conf

Exit and restart the switch.

SEFOS# exit

-> reset /SP

Are you sure you want to reset /SP (y/n)? y

Performing reset on /SP

SEFOS# write startup-config

SEFOS# copy startup-config tftp://12.0.0.100/switch.conf

Download the switch firmware package.

See “Download the Switch Firmware Package” on page 14.

Download the Switch Firmware Package

After backing up your current configuration, download the newest switch firmware package, for

example, Oracle_Switch_ES1-24_sefos-1_3_1_15.pkg.

http://support.oracle.com

Select the Patches & Updates tab.

Under the Patch Search section, select Product or Family (Advanced Search).

Type switch in the Product field and select Oracle Switch ES1-24.

Select the down arrow in the Release field and select the Oracle Switch ES1-24

folder.

14 Oracle Switch ES1-24 Product Notes • November 2016

Install the Switch Firmware

Select the newest release number.

Click the Search button.

Click the number in the Patch Name column.

Click Download.

10.

Click the filename of the .zip file to begin the download.

11.

Save the file to an appropriate location.

12.

Upgrade the firmware.

See “Install the Switch Firmware” on page 15.

Install the Switch Firmware

Note - You must be logged in as root to perform the upgrade.

Note - Before upgrading the switch firmware, back up the current configuration as described in

“Back Up the Current Configuration Before Upgrading” on page 12.

Ensure that you have a network configuration in place on the switch.

For more information, refer to the Oracle Switch ES1-24 Installation Guide.

Use TFTP, FTP, or the Oracle ILOM web interface to copy the firmware image to

your server.

Answer the questions that appear on the screen as you proceed through the

installation.

The following example illustrates the upgrade process using FTP from a server with an IP

address of 192.168.1.100.

-> cd /SP/firmware/

/SP/firmware



-> load -source ftp://username:[email protected]/Oracle_Switch_ES1-24_sefos-

1_3_1_15.pkg



Downloading firmware image. This will take several minutes.

Late-Breaking Information 15

Install the Switch Firmware



NOTE: An upgrade takes several minutes to complete. ILOM

will enter a special mode to load new firmware. No

other tasks can be performed in ILOM until the

firmware upgrade is complete and ILOM is reset.



Are you sure you want to load the specified file (y/n)? y

Preserve existing configuration (y/n)? y

Starting FW upgrade. This will take approximately 3 minutes.



Checking "root file system image"



Starting Root File System upgrade

Upgrading Root File System image to partition 1

.................................................................

Checking "compressed kernel image"



Starting kernel upgrade



Upgrading image to partition 1

....

Syncing configuration files

...................................

Checking "FPGA image"



Starting FPGA upgrade. This process may take up to 3 minutes.

Programming FPGA image

FPGA upgrade requires SEFOS to be stopped. Please wait while

FPGA is being programmed.

Skip upgrading FPGA (same version).

Checking "U-Boot image"

Starting U-Boot upgrade

Skip upgrading U-Boot (same version).



Firmware update is complete.

The system must be reset for the new image to be loaded



-> reset /SP

Are you sure you want to reset /SP (y/n)? y

Performing reset on /SP

16 Oracle Switch ES1-24 Product Notes • November 2016

Configuring the Switches

Note - If the hostname was not set prior to upgrade, the switch displays SUNSP-unknown in the

When the switch reboots after the upgrade, type the version command to verify

that software version is upgraded.

To show the system information, type these commands.



-> cd /SYS/fs_cli

cd: Connecting to Fabric Switch CLI



ORACLESP-AK00242424 SEFOS# show system information



Hardware Version : 2.5.8_00209384

Firmware Version : ES1-24-1.3.1.15

Switch Name : Oracle ES1-24

System Contact :

System Location :

Logging Option : Console Logging

Config Save Status : Not Initiated

Remote Save Status : Not Initiated

Config Restore Status : Not Initiated

Configuring the Switches

■

“Configure 1 Gbps Mode on SFP+ Interfaces” on page 18

■

“Configure Speed on the 10GBASE-T Interfaces” on page 18

■

“Fine Tune the VLAN Setup” on page 19

■

“Configuring In-Band Management” on page 23

■

“Managing SEFOS Configurations” on page 25

■

“Configuring TACACS+” on page 27

Late-Breaking Information 17

Configure 1 Gbps Mode on SFP+ Interfaces

The four SFP+ ports, 21 to 24, are dual-speed capable ports and can provide 1 Gbps

connectivity when used with the supported transceivers and configured for 1 Gbps operation

from the SEFOS CLI.

■

To configure a 1 Gbps fiber link, use the supported 10 Gbps/1 Gbps SFP+ transceiver (PN

x2129a). The speed must be changed to 1 Gbps on the appropriate port (see the following

example).

■

To configure a 1 Gbps copper link, use the supported SFP transceiver (PN x2123a), which

provides a RJ-45 interface. This is a 1 Gbps-only transceiver and the speed must be changed

to 1 Gbps on the appropriate port (see the following example).

Caution - When using 1 Gbps mode, autonegotiation must be disabled on the link-partner. The

link-partner must be configured in 1 Gbps-Forced-FDX mode.

Obtain the SEFOS prompt.

Configure the speed to 1 Gbps.

For example, to configure ports 21 and 22:

SEFOS# config terminal

SEFOS(config)# interface range extreme-ethernet 0/21-22

SEFOS(config-if)# shutdown

SEFOS(config-if)# speed 1000

SEFOS(config-if)# no shutdown

SEFOS(config-if)# end

SEFOS# write startup-config

Configure Speed on the 10GBASE-T Interfaces

The 20 10GBASE-T ports, 1 to 20, are triple-speed capable ports and can provide 10 Gbps,

1 Gbps, and 100 Mbps connectivity. The 10GBASE-T ports operate in autonegotiation mode

only and support all three speeds by default. For most deployments, the default setting would be

optimal, permitting link-partners with any speed to link up. If required, the maximum advertised

speed can be changed from the SEFOS CLI.

Obtain the SEFOS prompt.

Configure the maximum advertised speed to 1 Gbps.

18 Oracle Switch ES1-24 Product Notes • November 2016

Fine Tune the VLAN Setup

For example, to configure ports 11 and 12.

SEFOS#

SEFOS(config)# interface range extreme-ethernet 0/11-12

SEFOS(config-if)# shutdown

SEFOS(config-if)# speed 1000

SEFOS(config-if)# no shutdown

SEFOS(config-if)# end

SEFOS# write startup-config

Note - The ports only advertise 1 Gbps and 100 Mbps speeds.

Configure the maximum advertised speed to 100 Mbps.

For example, to configure ports 1 and 4.

SEFOS# config terminal

SEFOS(config)# interface extreme-ethernet 0/1

SEFOS(config-if)# shutdown

SEFOS(config-if)# speed 100

SEFOS(config-if)# no shutdown

SEFOS(config-if)# exit

SEFOS(config)# interface extreme-ethernet 0/4

SEFOS(config-if)# shutdown

SEFOS(config-if)# speed 100

SEFOS(config-if)# no shutdown

SEFOS(config-if)# end

SEFOS# write startup-config

Note - The ports only advertise 100 Mbps and can only link up with a link-partner at 100 Mbps

(if supported by the link-partner).

Fine Tune the VLAN Setup

The switch provides flexibility in managing ingress VLAN traffic. For example, you can enable

port ingress filtering and can also specify the acceptable frame type to implement fine-grained

control on the ingress traffic. Refer to the Sun Ethernet Fabric Operating System CLI Base

Reference Manual for details.

Obtain the SEFOS prompt.

Display the default port configuration.

Late-Breaking Information 19

Fine Tune the VLAN Setup

SEFOS# show vlan port config port extreme-ethernet 0/3



Vlan Port configuration table

-------------------------------

Port Ex0/3

Port Vlan ID : 1

Port Acceptable Frame Type : Admit All

Port Ingress Filtering : Disabled

Port Mode : Hybrid

Port Gvrp Status : Enabled

Port Gmrp Status : Enabled

Port Gvrp Failed Registrations : 0

Gvrp last pdu origin : 00:00:00:00:00:00

Port Restricted Vlan Registration : Disabled

Port Restricted Group Registration : Disabled

Mac Based Support : Disabled

Subnet Based Support : Disabled

Port-and-Protocol Based Support : Enabled

Default Priority : 0

Filtering Utility Criteria : Default

Port Protected Status : Disabled

-------------------------------------------------------

Reconfigure the port.

For example, to reconfigure the 10 GbE port Ex0/3 as a tagged port in vlan 3 and permit only

tagged frames:

SEFOS# config terminal

SEFOS(config)# vlan 3

SEFOS(config-vlan)# port extreme-ethernet 0/3

SEFOS(config-vlan)# exit

SEFOS(config)# interface extreme-ethernet 0/3

SEFOS(config-if)# switchport ingress-filter

SEFOS(config-if)# switchport acceptable-frame-type tagged

SEFOS(config-if)# end

SEFOS# show vlan port config port extreme-ethernet 0/3



Vlan Port configuration table

-------------------------------

Port Ex0/3

Port Vlan ID : 1

Port Acceptable Frame Type : Admit Only Vlan Tagged

Port Ingress Filtering : Enabled

Port Mode : Hybrid

Port Gvrp Status : Enabled

20 Oracle Switch ES1-24 Product Notes • November 2016

La page charge ...

Oracle ES1-24 Product Notes

Marque: Oracle

Modèle: ES1-24

Catégorie: Commutateurs réseau

Taper: Product Notes

Télécharger le PDF

rapport

dans d''autres langues

English: Oracle ES1-24

Oracle ES1-24 Product Notes

Oracle ES1-24 Product Notes

dans d''autres langues

Documents connexes

Autres documents