Philips 24PHT5565/68 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur
24PHT5565
Register your product and get support at:
www.philips.com/TVsupport
EN User Manual
1EN
English
Table of contents
1 Caution 2
2 Important 3
Safety 3
3 Overview of your TV 5
Remote control 5
Using the remote control 6
4 Using the TV 7
Switching the TV on or off 7
Switch channels 7
Adjust the TV volume 8
5 Other uses of the TV 9
Accessing the TV menu 9
Changing the picture and sound settings 9
Function settings 10
Using the timer 11
Playing multimedia Àles from US% devices 12
Updating the TV software 13
Restoring factory settings 13
6 Setting up channels 14
Setting up channels automatically 14
Swapping channels 14
Renaming channels 14
EPG 14
Recording option 15
Time-shift option 15
7 Connecting the TV 17
Down ports 17
Side ports 17
Connecting to a computer 18
Using Philips EasyLink 19
8 Product information 20
Display resolutions 20
Multimedia 20
Audio output power 20
Intrinsic resolution 20
Tuner/reception/transmission 20
Remote control 20
Power supply 20
Supported TV mounts 21
9 Troubleshooting 22
General issues 22
Channel issues 22
Picture issues 22
Sound issues 23
HDMI connection issues 23
Computer connection issues 23
Contact us 23
10 Warranty 25
2 EN
Copyright
®
Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with
issued registrations and pending applications
in other countries and regions throughout the
world.
®
HDMI the HDMI logo and High-DeÀnition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC
in the United States and other countries and
regions.
All other registered and unregistered
trademarks are the property of their respective
owners.
This product is manufactured under license
from Dolby Laboratories. Dolby, Dolby Audio
and the double-D symbol are registered
trademarks of Dolby Laboratories.
1 Caution
2020 TP Vision Europe %.V. All rights reserved.
SpeciÀcations are subject to change without
notice. All trademarks are the property of
Koninklijke Philips N.V. or their respective
owners. TP Vision Europe %.V. reserves the right
to change products at any time without being
obliged to adjust previously supplied products.
The material in this manual is adequate for
the intended use of the system. If the product,
or its individual modules or procedures, are
used for purposes other than those speciÀed
herein, their validity and suitability must Àrst
be conÀrmed. TP Vision Europe %.V. warrants
that the material itself does not infringe upon
any patents from the United States. No further
warranty is expressed or implied.
TP Vision Europe %.V. accepts no responsibility
for any errors in the content of this document,
nor for any issues that arise due to the content
of this document. Errors reported to Philips
will be rectiÀed and published on the Philips
support website as quickly as possible.
Terms of warranty
Risk of injury, damage to the TV or voided
warranty! Never attempt to repair the TV
yourself.
Please only use the TV and accessories as
set out by the manufacturer.
The caution sign printed on the back of
the TV indicates the risk of electric shock.
Never remove the TV cover. Please contact
Philips Customer Support if repairs are
needed.
Operations expressly prohibited in this
manual, or any adjustments and assembly
steps that are not recommended or
authorised in this manual, are not within
the scope of the warranty.
Pixel characteristics
This LCD/LED product has a high number
of colour pixels. Although its proportion of
effective pixels is 99.999% or more, black dots
or bright points of light (red, green or blue)
may appear persistently on the screen. This
is a structural property of the display (within
common industry standards), and is not a fault.
3EN
English
Risk of personal injury or damage to the TV!
TVs weighing more than 25 kg must be
carried by at least two people.
Use the stand supplied when mounting the TV
on a stand. Secure the TV to the stand tightly.
Place the TV on a Áat, level surface that can
bear the weight of the TV and the stand.
When mounting the TV on a wall, use a wall
mount that can bear the weight of the TV.
Secure the wall mount bracket to a wall that
can bear the total weight of the TV and the
wall mount. TP Vision Europe %.V. accepts no
responsibility for improper wall mounting
leading to accident, injury or damage.
Remove the stand from the TV when storing
the TV. Never place the TV face down with the
stand attached.
%efore connecting the TV to the power outlet,
make sure that the power voltage matches
the value printed on the back of the TV. Never
connect the TV to the power outlet if the
voltages do not match.
This product contains glass parts. Handle with
care to avoid injury or damage.
Risk of injury to children!
Follow these precautions to prevent the TV from
toppling over and injuring children:
Never place the TV on a surface covered by
a cloth or other material that can be pulled
away.
Make sure that no part of the TV hangs over
the edge of the supporting surface.
When you place the TV on high furniture
(such as a bookcase), both the furniture and
the TV must be secured either to the wall or a
suitable support.
Educate children on the dangers of climbing
on furniture to reach the TV.
Risk of swallowing batteries!
The product/remote control may contain
coin-type batteries, which can easily be
swallowed. Keep these batteries out of reach
of small children at all times!
Risk of overheating!
Never install the TV in a conÀned space.
Leave a space of at least 4 inches (10 cm)
around the TV for ventilation. Ensure that the
ventilation slots on the TV are not covered by
curtains or other objects.
2 Important
Please read and make sure you understand all
instructions before using the TV. Damage caused by
a failure to follow the instructions is not covered by
the warranty.
Safety
5LVNRIHOHFWULFVKRFNRUÀUH
Never expose the TV to rain or water. Never
place liquid containers (such as vases) next
to the TV. If liquids are spilt on or inside the
TV, disconnect the TV from the power supply
immediately. Contact the Philips Customer
Service Centre to have the TV checked before
you use it again.
Never place the TV, remote control or
batteries near naked Áames or other heat
sources (including direct sunlight).
To avoid Àre spreading, always keep candles or
other naked Áames away from the TV, remote
control and batteries.
Never insert any objects into the ventilation
slots or other openings on the TV.
Make sure that no strain is placed on the
power cable when swivelling the TV. Strain on
the power cable can loosen connections and
cause arcing.
The power plug of the TV must be
disconnected to disconnect the TV from the
mains supply. When you disconnect the power,
always pull out the power plug, and never the
cable. Ensure that the power plug, power cable
and outlet socket are accessible at all times.
The power plug is a disconnection device and
should be kept so that it is easy to operate.
5LVNRIVKRUWFLUFXLWRUÀUH
Never expose the remote control or batteries
to rain, water or excessive heat.
Avoid pulling the power plug. Loose power
plugs can lead to arcing or Àre.
4 EN
Displaying static images from video games
and computers for extended periods may
cause an afterimage and ghosting due to
screen burn. Reduce the screen brightness
and contrast accordingly when using the TV
in this way.
Any afterimages, ghosting or marks displayed
on the TV screen due to the causes mentioned
above are not covered by the warranty.
Recycling
This product has been manufactured using high-
performance materials and components that can
be recycled and reused.
When the crossed-out wheeled bin symbol is
attached to a product, the product is covered
by European Directive 2012/19/EU. Familiarise
yourself with your local separate collection
system for electrical and electronic products.
Follow local regulations and do not dispose of
your old products with normal household waste.
Proper disposal of old products helps to prevent
potential harm to the environment and human
health.
This product contains batteries covered by
European Directive 2006/66/EC. These batteries
cannot be disposed of together with normal
household waste.
Educate yourself on local regulations covering
the separate collection of batteries, as proper
battery disposal helps to prevent harm to the
environment and human health.
5LVNRILQMXU\ÀUHRUSRZHUFRUGGDPDJH
Never place the TV or any objects on the
power cable.
Disconnect the TV from the power outlet
and antenna before lightning storms. During
lightning storms, never touch any part of the
TV, power cable or antenna.
Risk of damage to hearing!
Avoid the use of earphones or headphones
at high volume for prolonged periods.
Low temperatures
If the TV is transported in temperatures
below 5°C (41°F), unpack the TV and wait
for it to reach room temperature before
connecting the TV to the power outlet.
Screen care
Avoid static images as much as possible.
Static images are images that remain
onscreen for extended periods. Examples
include onscreen menus, black bars and
time displays. If you must use static images,
reduce the screen contrast and brightness
to avoid screen damage.
Unplug the TV before cleaning.
Use a soft damp cloth to wipe the TV and
frame. Never use substances such as alcohol,
chemical products or household cleaners to
clean the TV.
Risk of damage to the screen! Never touch,
push, rub or strike the screen with an object.
Wipe off any water as quickly as possible to
avoid deformation and discolouration.
Note
Static images may cause permanent damage to
the TV screen.
Do not display static images on LCD TV
screens for longer than 2 hours, as this
can cause ghosting onscreen. To prevent
ghosting, reduce the brightness and contrast
of the screen when displaying static images.
Watching programmes in 4:3 format for
extended periods may leave different marks
on the left and right of the screen and the
border of the image. Therefore, avoid using
this mode for prolonged periods.
5EN
English
Remote control
SETUP
SOURCES EXIT
LISTBACK
FORMAT
OPTIONSINFO
1
2
3
5
6
7
8
9
10
11
12
4
13
14
15
16
17
18
19
21
22
20
a (Standby/On)
Switch the TV on or to standby.
b Playback buttons
Control video, music or text.
c
FORMAT
Change picture format.
d
(Home)
Access or exit from the main menu and
return to the previous menu.
3 Overview of
your TV
Congratulations on your purchase and welcome
to Philips! To fully beneÀt from the support
offered by Philips, please register your TV at
www.philips.com/TVsupport.
Control panel
1
2
4
3
5
a Volume-: Without the key menu, the
volume- down function is available.
b Volume+: Without the key menu, the
volume+ up function is available.
c Channel
+: When there is no keyboard
menu, switch to the next channel function;
when the keyboard menu appears, move
up and down the appropriate options.
d Channel-: When there is no keyboard
menu, switch to the prior channel function;
when the keyboard menu appears, move
up and down the appropriate options.
e Signal source/OK: In standby, the signal
source/OK key is used as a power key.
Press this key to boot.
After booting, the signal source/OK key is
used to open the keyboard menu functions.
Note: In US% mode, the signal source/OK
key has no function.
6 EN
Using the remote control
When you use the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight between
the remote control and TV is not blocked by
furniture, walls or other objects.
30
5m
e EXIT
Switches to TV.
f
OPTIONS
In TV mode, access Options to select audio.
g (Navigation buttons)
Navigate through menus and select items.
h OK
ConÀrm an entry or selection.
i LIST
Access or exit from the TV channel list.
j CH +/- (Channel +/-)
Changes channels; scrolls up/down through
the options in US% mode.
k (Mute)
Mute or restore audio.
l 0-9 (Numeric buttons 0-9)
Select channel.
m TEXT
Enable or disable teletext.
n SUBTITLE
Select the subtitles.
o +/- (Volume)
Adjust volume.
p
BACK
Return to the previous menu or exit from a
certain function , and switch to the previous
channel or signal source.
q INFO
Display information about current activity.
r Color buttons
Select tasks or options.
s SOURCES
Select connected devices
t SETUP
Accesses TV setup menu.
u TV GUIDE
Accesses or exits the TV guide.
v Red dot
Recording function.
7EN
English
Switch channels
1
2
4
3
5
Press CH+/- on the remote control or the
lower right section of the TV.
Enter a channel number using the numeric
buttons on the remote control.
Press
on the remote control to switch
and return to the previous channel.
View installed channel
All available channels can be viewed in the
channel list.
LIST
1 Press LIST.
» The channel list appears.
2 Press to select channels and to
browse the channel list.
3 Press OK to watch the selected channel.
4 Press to switch and return to the last
watched channel.
4 Using the TV
This section helps you to perform basic TV
operations.
Switching the TV on or off
Standby indicator
To switch on
Plug in the power plug.
» If the standby indicator is red, press
(Standby/On) on the remote control.
To switch to standby
Press
(Standby/On) on the remote
control.
» The standby indicator switches to red.
Tip
Though your TV consumes very little power when
in standby mode, energy continues to be consumed.
When not in use for an extended period of time,
disconnect the TV power cable from the power outlet.
8 EN
Adjust the TV volume
1
2
4
3
5
To increase or decrease volume
Press VOL +/- at the lower right part of
he TV or the Volume Control+/- on the
remote control.
To mute or unmute sound
Press
(Mute).
Press
again to restore the sound.
Watch connected devices
Note
Switch on the device before selecting it as an external
signal source.
Use the Souces button
SOURCES
1 Press SOURCES.
» The source list appears.
2 Press to select a device.
3 Press OK to conÀrm.
» The TV switches to the selected
device.
9EN
English
Adjusting the picture settings
1
Press (Home) and select [Setting] to enter
the [Setting] menu. Then select [Picture].
» The [Picture] menu is displayed.
2 Press to select/adjust the settings:
[Smart Picture]:
[Standard]: standard picture settings.
This option is recommended for home
entertainment use.
[Vivid]: increases the contrast and
sharpness of the picture.
[Movie]: applies to Àlm settings and works
best in a home cinema environment.
[Natural]: increases the softness of the
picture.
[Personal]: you can customise your settings
with this option.
[Brightness]: adjusts the intensity and detail of
dark areas (the adjustments made can only be
saved in personal settings).
[Video Contrast]: adjusts the intensity and
detail of bright areas, while dark areas remain
unchanged (the adjustments made can only be
saved in personal settings).
[Color]: adjusts the colour saturation (the
adjustments made can only be saved in
personal settings).
[Tint]: adjusts the level of green (this option
only appears when using the NTSC system).
[Sharpness]: adjusts the sharpness of the image
(the adjustments made can only be saved in
personal settings).
[Color Temperature]:
[Cool]: gives a bluish-white hue.
[Normal]: gives a white hue. Users can
customise the white hue when in PC
mode.
[Warm]: gives a reddish-white hue.
[Advance Control]:
[Noise Reduction]: Àlters and eliminates
signal noise in the image.
[Backlight]: adjusts the screen brightness
(when the backlight is set to a low value,
a brief white Áicker may be seen when
switching the TV on. This is normal).
[Dynamic Contrast]: sets the contrast to
maximum.
[Dynamic Backlight]: the contrast changes
with the brightness of the image.
Note
Options may vary for pictures from different sources.
5 Other uses of
the TV
Accessing the TV menu
The menu helps you set up channels, change
the picture and sound settings, and access other
functions.
1 Press (Home) .
» The menu screen is displayed.
Philips TV
Channels
Sources
lŝƟes
SeƫnŐs
SelecƚƚoǀŝeǁƚhelŝsƚoĨseƫnŐs
oīereĚŝnƚhŝsds
2 Select [Setting].
3 Press to select from the following
options:
[Picture] / [Sound] / [TV] (only shown in
TV mode) / [Settings] / [Parental] (only
shown in TV mode) / [EasyLink].
4 Press OK to confirm.
5 Press Home to exit or return to the
previous menu.
Changing the picture and
sound settings
You can change the picture and sound settings
to suit your preferences. You can use the preset
settings or manually adjust the settings.
10 EN
Function settings
1 Press (Home) and select [Setting] to enter
the [Setting] menu. Then select [Settings].
» The [Settings] menu is displayed.
2 Press to select and adjust the settings:
[Menu Language]: adjusts the language
settings of the TV.
[Picture Format]: the majority of signals
use 16:9, 4:3, zoom 1 and zoom 2 formats.
HDMI signal sources use 16:9, 4:3, Point to
Point, zoom 1 and zoom 2 formats.
[Menu Timeout]: sets how long the menu
is displayed.
[Blue Screen]: sets the colour of the
screen when the TV receives no signal
(when the TV signal is not functioning).
[Auto Sleep]: sets how long the TV
must be idle for before switching off
automatically (not applicable to PC mode).
[Sleep Timer]: sets when the TV
automatically enters standby mode.
The options are: off/10/20/30/60/90/
180 minutes..
[Time Setup]: sets the system time.
[Freeze Switch]: sets the freeze screen
for switching channels (only available in TV
mode).
[TTX Language]: sets the Teletext language
(only available in TV and video modes).
[Color System]: sets the AV colour system
(only displayed in AV mode).
[HDMI Mode]: sets the HDMI mode (only
displayed in 480p/576p/720p/1080p HDMI
modes).
[PVR File System]: before carrying out
PVR operations, the US% Áash drive must
be formatted and memory space allocated.
[Enable OAD Upgrade]: enables and
disables OAD updates.
[Reinstall TV]: restores all settings to
default and reopens the installation wizard
menu.
[Reset]: restores the default settings
(excluding password settings and channel
information).
[Software Version]: checks the current
software version.
Adjusting the sound settings
1
Press (Home) and select [Setting] to enter
the [Setting] menu. Select [Sound].
» The [Sound] menu is displayed.
2 Press to select and adjust the settings:
[Smart Sound]:
[Standard]: gives balanced,
outstanding sound performance in
the treble, mid and bass ranges.
[Music]: enhances treble and bass,
delivering bright, clear, pure sound
for piano or orchestral instrument
performances.
[Movie]: enhances Àlm sound effects,
allowing you to enjoy a home
cinema-like effect.
[Speech]: enhances the performance
of sound ranges associated with the
human voice spectrum. This option
is suitable for watching news or arts
programmes.
[Flat]: enhances the smoothness of
the sound output, creating a softer
sound.
[Personal]: provides users with
customisation functions so that
all sound effect parameters are
optimised to create the best
possible experience.
[Balance]: adjusts the balance of the left
and right speakers.
[Bass]: adjusts the base level (the
adjustments made can only be saved in
personal settings).
[Treble]: adjusts the treble level (the
adjustments made can only be saved in
personal settings).
[Virtual Surround]: enables virtual
surround sound: switching on or off.
[AVL]: turns automatic volume adjustment
on when switching channels.
[SPDIF MODE]: selects the coaxial output
mode.
[Audio Delay]: delays the sound output.
[TVSpeakers]: turns sound on the TV on
and off.
[Clear Sound]: turns speech on and off.
[TV Placement]: adjusts the means of the
TV placement.
11EN
English
Using the timer
You can set the timer to switch the TV to standby
mode at a set time.
Tip
Set the sleep timer before using the timer function.
Setting the sleep timer
Tip
You can turn the TV off in advance or reset the sleep
timer when the timer is up.
1 Press (Home) and select [Setting] to enter
the [Setting] menu. Then select [Settings].
2 Press to select [Sleep Timer].
3 Press to select a time for the sleep timer
to switch the TV off.
» The longest time that the sleep timer can
be set for is 180 minutes.
TV lock
%y locking the TV remote control, you can prevent
children from watching speciÀc programmes or
channels.
Setting or changing your password
1 Press (Home) and select [Setting] to enter
the [Setting] menu. Then select [Parental].
2 Enter the password using the numeric buttons
on the remote control.
3 Select [Change Password] and follow the
instructions onscreen to change the password.
Locking channels
1 Press (Home) and select [Setting] to enter
the [Setting] menu. Then select [Parental].
2 Enter the password and select [Parental
Rating].
3 Adjust the channel locking rating.
Changing the picture format
1 Press (Home) and select [Setting] to enter
the [Setting] menu. Then select [Settings].
2 Press to select [Picture Format].
3 Select a picture format.
4 Press OK to conÀrm.
Summary of picture formats
The following picture formats can be conÀgured.
Note
Some picture settings may be unavailable due to
differences between picture signal formats.
[16:9]: adjusts the normal
standard ratio to a
widescreen format.
[4:3]: the normal standard
format.
[Zoom 1]: horizontal
scaling for the widescreen
picture format. When this
format is used, the left and
right of the frame will be
partially cut off.
[Zoom 2]: adjusts the
standard ratio to a
widescreen format
(only 16:9, 4:3 and Point to
Point options are available
in PC mode).
[Point to Point]: used for
HDMI connections with
PCs. This displays the full
PC screen to achieve the
best display results.
12 EN
2 Connect the US% storage device to the
US% port on the side of the TV.
3 Press (SOURCES).
4 Select [USB] and press OK.
» The US% browser will open.
Viewing photos
1 Select the photo within the US% browser
and press OK. The photo will be enlarged
to Àll the screen.
Press CH- or CH+ to see either the
previous or the next photo.
Starting slide shows
1 Select a photo or folder and then press
OK. The photo will be enlarged to Àll the
screen.
» The slide show will start playing from
the selected photo.
2 Press the following buttons to control the
playback of photos:
or : play or pause
CH- or CH+: view either the previous
or the next photo.
Changing the slide show settings
To start playing a slide show, press (Option)
and select one of the following options, then
press OK.
[Rotate]: sets the images to rotate.
[Duration]: sets the duration of the slide
show.
Listening to music
1 In the US% browser, select a song or album.
Then press OK to begin playing.
Changing the music settings
or : to play or pause.
4 Repeat this step to adjust the channel ratings.
[Parental Rating]: when channels are
locked:
Enter the four-digit password to
access the channel blocking menu.
Enter the four-digit password to view
locked channels.
Enter the four-digit password to
access the parental lock menu.
[Clear All]: this function will clear all
previously saved locked channels and signal
sources.
The default password is ‘0000’. Users
may change or set the password
themselves.
Note
If you go to a locked channel, you will be prompted to
enter the password.
3OD\LQJPXOWLPHGLDÀOHVIURP
USB devices
You can play photo, music or video Àles stored on a
US% storage device on your TV.
Supported storage devices: US% (only FAT or
FAT 32 US% storage devices are supported)
Supported multimedia Àle formats:
Images: JPEG
Audio: MP3
Video: MPEG 2/MPEG 4, H.264
Documents: TXT
Note
TP Vision assumes no responsibility if a US% storage
device is not supported, or if the data on the device is
damaged or lost.
9LHZLQJSKRWRVDQGWH[WÀOHVDQGSOD\LQJ
DXGLRDQGYLGHRÀOHV
1 Turn the TV on.
13EN
English
Visit www.philips.com/TVsupport to check
whether updates are available.
Restoring factory settings
You can restore the default picture and sound
settings for your TV without affecting the saved
channel set up.
1 Press (Home) and select [Setting] to
enter the [Setting] menu
2 Press Then select [Settings] >
[Reset].
3 Select [Yes] and press OK. If you wish to
cancel, select [No] and press OK.
: switches to the previous/next song.
: for rewinding or fast forwarding.
Watching videos
1 Select the video Àle in the US% browser,
then press OK to play the video.
2 The following buttons are used to control
the Àlm:
or : to play or pause.
: move to the previous or next
one.
: for rewinding or fast
forwarding.
9LHZLQJWH[WÀOHV
1 Select the text Àle in the US% browser,
then press OK to view the document.
2 The following buttons are used to control
the text playback:
or : to play or pause
: to go back 20 pages or move
on 20 pages.
Removing USB storage devices
Note
Follow the steps below to avoid damaging the US%
storage device.
1 Hold down to exit the US% browser.
2 Wait around 5 minutes before removing
the US% storage device.
Updating the TV software
Philips constantly strives to improve its products,
and so we recommend that you update your
TV software whenever an update is released.
14 EN
6 Setting up
channels
This chapter explains how to reconÀgure and
Àne-tune channels.
Setting up channels
automatically
This option automatically Ànds and saves
channels.
1 Press (Home) and select [Setting] to
enter the [Setting] menu
2 Press to select [TV] >
[Channels] > [Channel Scan].
3 Press OK.
» The TV will start searching for channels
automatically.
Swapping channels
1 Press (Home) and select [Setting] to
enter the [Setting] menu.
2 Press to select [TV] >
[Channels] > [Channel Edit].
» The [Channel Edit] menu is displayed.
3 Press to select the analogue channel
you wish to swap. Then press the blue
button.
4 Press to select the analogue channel
you wish to swap. Then press the blue
button to conÀrm.
Renaming channels
You can rename channels. Selecting a channel
will display its name
1 Press (Home) and select [Setting] to
enter the [Setting] menu.
2 Press to select [TV] >
[Channels] > [Channel Edit].
» The [Channel Edit] menu is displayed.
3 Press to select the analogue channel
you wish to rename. Then press the OK
button.
4 Press to select the channel name,
then press the OK button to enter the
editing interface.
5 Press to select the characters.
6 Select >&RQÀUP@WKHQOK to Ànish
renaming the channel.
Tip
Channel names can be up to six characters long.
EPG
1 Press
(TV GUIDE)
on the remote
control to access TV program guide list
(It is available only in DTV mode). In this
program guide list, press
to select the
current time and date, and then press
to view all programs information in the
next 7 days of the future
(Fig.1).
15EN
English
TV Guide
TIME
01 Mar 201004:43
1 BBC HD Winter Olympics 2010
Wild at Heart2 ITV1 HD
No Information4 BBC NEWS 24
No Information3 BBC THREE
No Information5 BBC1
No Information6 CBBC Channel
No Information7 SDTV
No Information8 BBC ONE
Record Set Reminder
InfoSchedule List
2 Press to select Channel in the top
bar of guide list, then press
to view a
program information in the next 7 days of
the future. Focus on the Channel bar you
can press
to view the other programs
information (Fig.2).
TV Guide
Channels
2 ITV1 HD Channels
04:30-05:30 Wild at Heart
Dancing on Ice - The S...05:30-06:00
Syrlana06:15-08:35
ITV News & Weather06:00-06:15
Guinness Premiership R...08:35-09:25
UEFA Champions Leagu...09:25-09:55
The Yakuza09:55-11:50
Dating the Enemy11:50-12:15
Record Set Reminder
InfoSchedule List
You can select the color keys to edit these
programs with the tips on the screen. The color
keys introductions as below:
Record: Press
red key to record
the program.
Remind: Press
green key to set
remind the program.
Info: Press blue key to display the
program information.
Schedule: Press
yellow key to view
program status in schedule list.
Recording option
In DTV mode, press red dot on the remote
control. Record option menu will show on the
screen, and the TV system begin recording now.
1 Press key to stop and quit the recording.
2 Press (Home), select [Utilities] >
[Recordings] to open the TV recorded list.
3 Press green key to view the Àle
information or delete it by pressing
red
key, and press OK to play it normally.
Note
This function need connect with US% device, the US%
of FAT32 format must be used. The US% of NTFS
format does not support recording. The duration of
each recording should be no longer than 6 hours.
Recording options menu introduction
: Play the current video.
: Fast back for the video, press (play)
key to play normally.
: Fast forward for the video, press
(play) key to play normally.
: Pause the video.
: Stop recording and quit the recording
function.
Time-shift option
In DTV mode, press (start) , time-shift option
menu will show on the screen, and the program
is in suspended status. press
to stop and quit
time-shift function. When you leave program for
16 EN
a short time, time-shift function can suspend and
cache the playing program to U disk.
When you resume playing, the program can
continue to be played.
Time-shift options menu introduction
: Play the current video.
: Fast back for the video, press (play)
key to play normally.
: Fast forward for the video, press
(play) key to play normally.
: Pause the video.
: Stop and quit time-shift function.
17EN
English
b HDMI 1
Digital audio and video input from high
deÀnition devices such as %lu-ray players.
Side ports
a HDMI 2 (ARC)
Digital audio and video input from high
deÀnition devices such as %lu-ray players.
b SPDIF OUT
Digital audio signal output for digital audio
equipment.
7 Connecting the
TV
This section explains how to connect devices
with different connectors.
Note
You can use different connection types to connect
devices to the TV.
Down ports
a AV input
Video L R
CVBS L R
18 EN
Note
Headphones can only be used as a low-power audio
output. Do not connect high-power active devices
(such as high-power active speakers).
Connecting to a computer
%efore connecting a computer to the TV:
Set the computer screen refresh rate to
60 Hz.
Select a supported screen resolution on
the computer.
Connect to the computer using one of the
following connections:
Note
A separate audio cable is required when connecting
via DVI.
HDMI cable
1 Set the resolution of the computer display
to 480p/576p/720p/1080p
2 Press (Home) and select [Setting] to
enter the [Setting] menu.
3 Press to select [Settings] >
[HDMI Mode], and set the HDMI display
mode to graphics or video.
4 Adjust the picture format to achieve the
best display results.
Press
(Home) and select [Setting]
to enter the [Setting] menu.
Press
to select [Settings] >
[Picture Format].
Select a picture format.
Press OK to conÀrm.
SPDIF OUT
c TV Antenna
Input for an antenna, cable or satellite signal
d USB
Data input from a US% storage device.
e Headphones
q
Stereo sound output for headphones.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

Philips 24PHT5565/68 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur

dans d''autres langues