Yamaha CS-700 Mode d'emploi

1

Video Sound Collaboration System for Huddle Rooms

Operations Guide

Always update the firmware to the latest version.

Please refer to the user’s manual that provides detailed information on how to use the product.

You can download the latest firmware and user’s manual from the following website:

https://uc.yamaha.com/products/video-sound-bar/huddle-room-system/

CS-700

Video Conference System / Système de vidéoconférence

ビデオ会議システム

/

视频会议系统

EN

2

of this document may be reproduced in any form or by any means without

express written permission from Yamaha Unified Communications, Inc. Product

specifications are subject to change without notice.

Yamaha CS- 700 Installation and Operation Guide

MN- CS700- 202003 - EN

March 2020 (Rev 1.4 )

3

Online Resources

Resource

Website

Yamaha Unified Communications

uc.yamaha.com/

Yamaha CS 700

uc.yamaha.com/products/video-

sound-bar/huddle-room-system/

Customer Support

uc.yamaha.com/support

4

Contents

Online Resources ............................................................................................ 3

Contents ......................................................................................................... 4

Introduction .................................................................................................... 8

About this Manual .......................................................................................... 8

Abbreviations ............................................................................................... 8

Trademarks.................................................................................................. 8

Getting Started ............................................................................................... 9

Content and Component Overview................................................................ 9

CS-700 Unit .............................................................................................. 9

Installing the system .................................................................................. 12

Bracket installation ................................................................................. 12

Placing the CS-700 unit on the bracket ................................................... 13

Connecting the CS-700 ........................................................................... 13

Installing unit in Bracket ......................................................................... 14

Secure unit ............................................................................................. 14

Setting up the system................................................................................. 15

Connecting the Power .............................................................................. 15

Connecting to a Computer – USB 3.0 ...................................................... 16

Select device ............................................................................................ 16

Connecting to an IP Network for System Management and SIP telephony . 17

Discovering IP Address ............................................................................ 17

Connecting Extension Microphone .......................................................... 18

Using Cable Management ........................................................................ 18

Adjusting Vertical Camera Angle ............................................................. 18

User Interface ............................................................................................... 20

CS-700 ...................................................................................................... 20

Web User Interface (Web-UI) ....................................................................... 20

Service Application ..................................................................................... 49

Installation & Configuration .................................................................... 50

5

Using the Service Application .................................................................. 55

Camera Control Application ....................................................................... 69

Installation & Configuration .................................................................... 69

Using the Camera Control Application ..................................................... 73

Dialer Application ......................................................................................... 74

Supported Tablets ...................................................................................... 74

Dialer application ....................................................................................... 74

Installing the dialer application .................................................................. 74

Dialer interface .......................................................................................... 75

Home screen ........................................................................................... 75

Main Menu .............................................................................................. 76

Contacts ................................................................................................. 77

Call History ............................................................................................. 78

Connection .............................................................................................. 79

Settings ................................................................................................... 79

Dialing and call control ........................................................................... 80

Basic Operations ........................................................................................... 85

USB Connected Video Conferencing – BYOD (Bring Your Own Device) ........ 85

USB Connected Video Conferencing – DIR (Device in Room) ....................... 85

Controlling the Video Image ....................................................................... 85

Bluetooth Pairing and Activation ................................................................ 85

Aux-IN Audio Support ................................................................................ 86

Configuring the CS-700................................................................................. 87

Configuring using the Web User Interface ................................................... 87

Configuring using the Service Application................................................... 87

Configuring using a Provisioning Server, Option 66 .................................... 87

Configuring using a Provisioning Server, Option 150 .................................. 88

Provisioning file .......................................................................................... 89

Sample device configuration file ............................................................... 89

Provisioning file parameters (All Models) ..................................................... 90

Using the Application Programming Interface (API) ................................... 105

6

USB API functions ................................................................................. 105

Telnet / SSH interface ........................................................................... 108

USB/Telnet/SSH CLI Commands .......................................................... 108

Upgrading the Device Firmware ................................................................... 129

Through the Web UI ................................................................................. 129

Through the Service Application ............................................................... 129

From the Provisioning Server .................................................................... 129

Appendix .................................................................................................... 130

Session Control Functionality Details per Third Party Application ............ 130

Using Windows Computers and MacOS computers ................................ 130

USB 3.0 Extension Cables ........................................................................ 130

SNMP Support Details .............................................................................. 131

SNMP MIB for the CS-700 ..................................................................... 132

Dial Plan definition................................................................................... 135

Definition of modifiers ........................................................................... 135

Examples .............................................................................................. 136

Optimize Windows for CS-700 Audio ........................................................ 137

Troubleshooting ....................................................................................... 138

Reboot ................................................................................................... 138

Restore Factory Defaults ....................................................................... 138

Cannot Access Web UI ........................................................................... 138

Lost Password ....................................................................................... 139

Low Camera Image Quality (Far-end video) ............................................ 139

Misaligned Camera Image (Far-end video) .............................................. 140

No Camera Image at Far-end ................................................................. 140

Technical Specifications ........................................................................... 141

Date code ................................................................................................. 143

Limited Warranty and Limitation of Liability ................................................ 144

Limited Warranty ..................................................................................... 144

Exclusions and Remedies ......................................................................... 145

WARRANTY EXCLUSION .......................................................................... 145

7

Limitation of Liability ............................................................................... 146

Disclaimer ................................................................................................ 146

Governing Laws........................................................................................ 146

Open Source Software .............................................................................. 147

8

Introduction

Thank you for choosing the Yamaha CS-700 Video Sound Collaboration

System. This Video Sound Collaboration System allows you to provision your

Huddle Room or small multipurpose conference room for all forms of

multimedia Unified Communications using popular video collaboration

applications, as well as independent VOIP-based conference call support. With

Yamaha CS-700 products, video and audio performance is optimized for the

Huddle Room space to deliver class-leading performance, ensuring every word

of the conversation is heard, and every visual nuance is captured.

The complete CS-700 family includes all of the following models

• CS-700AV – Audio/Video/Management Model

• CS-700SP – Audio/Video/SIP/Management Model

Where there is a difference in capabilities or configuration, the document will

highlight that explicitly.

About this Manual

Abbreviations

In this manual, the product names are described as follows.

• Yamaha CS-700: the product

• Microsoft® Windows®: Windows

• macOS®: macOS

• Google® Play Store®: Play Store

Trademarks

• Microsoft and Windows are registered trademarks of Microsoft

Corporation in the United States and other countries.

• Mac and macOS are registered trademarks of Apple Inc.

• Chrome OS is a trademark or registered trademark of Google Inc.

• Bluetooth® is a registered trademark of the Bluetooth SIG and is used by

Yamaha in accordance with a license agreement.

• NFC logo (N-Mark) is a trademark or registered trademark of NFC Forum,

Inc.

• Google and Google Play Store are registered trademarks of Google, LLC

9

Getting Started

Content and Component Overview

Depending on the system you have purchased, you will find the following

content in the box:

CS-700AV, CS-700SP

CS-700 Sound/Camera Unit

Wall Mounting Bracket

Region Specific Power Cord

Power Supply

Ethernet Cable

USB Cable

Instructions

CS-700 Unit

The main CS-700 Unit contains all the major components of the CS-700

System, including 4 Speaker Elements, 4 beam forming microphones, the

optimized 120° FoV HD camera, and front-panel control buttons for: volume

up/down, MIC mute, Camera mute, Bluetooth pairing, NFC Bluetooth pairing.

A system status indicator shows state of the system.

Volume Control & Mute

The speaker volume can be increased or decreased using the volume up and

volume down buttons. The microphones are muted using the mute button.

The mute/unmute button is only functional when microphones are activated.

120° FoV

Camera

Speaker Elements

Beam-Forming

Microphones

Volume & Mute

Controls

Speaker Elements

Camera Mute

Bluetooth Pairing &

Status + NFC Pairing

System

Call Status

10

The microphone mute button provides a colored indication of mute status.

Three different microphone states correspond to the color of the LEDs.

Speaker / Volume State

Volume LED Color

Speaker Volume Buttons Enabled

White

Speaker Volume Buttons Not Enabled

OFF

Microphone/Mute State

MIC LED Color

Active microphones, unmuted

Green

Active microphones, muted

Red

Microphones not active

OFF

Camera Mute

The camera can be “muted” to prevent active video transmission. Whenever the

Camera Mute button is pressed to mute the video stream, the camera video

stream is substituted with a “pause image” to the far-end.

The camera mute button provides a colored indication of the camera mute

status. The button will light RED when pressed.

Camera Streaming State

Camera MUTE LED Color

Active camera, unmuted

Green

Active camera, muted

Red

Camera not active

White

Camera software upgrade in process

Slow Flash Red

Bluetooth Indicator and NFC Pairing

The Bluetooth indicator shows whenever the CS-700 is in active pairing mode

(flashing blue) or has actively connected with a local Bluetooth device (steady

blue). The NFC paring indicator enables Bluetooth devices capable of NFC

pairing to do so with the CS-700.

Bluetooth Pairing

Bluetooth LED Color

Bluetooth Enabled, No Connection

White

Bluetooth Initializing

Slow Flash White

System Software Update In Process

Fast Flash White

Bluetooth Pairing In Process

Flash Blue

Bluetooth Enabled, Active Connection

Solid Blue

Bluetooth Service Not Enabled

OFF

11

Bluetooth NFC Pairing

NFC LED Color

Bluetooth Enabled +

NFC Pairing Enabled

White

Bluetooth Service, NFC Not Enabled

OFF

System Call Status Indicator

The System Call Status Indicator located immediately below the Yamaha logo

shows whenever the CS-700 is actively engaged in a call or not. It also shows

whenever a hardware failure has been detected by turning RED. The following

color codes have been assigned:

Call Status Indicator

System Status LED Color

Not in Call (BT, VOIP), or

USB Connected but

NO Video/Audio Stream

White

CS-700 Unit OFF or Booting-UP

OFF

Call Active (BT, VOIP), or

USB Connected and Video/Audio

stream active.

Green

Call on Hold

Flashing Green

Hardware Failure Detected

Red

12

Installing the system

The CS-700 unit is designed to be mounted to the huddle-room wall using the

bracket included with the unit. The recommended mounting location is directly

adjacent to the display unit, typically just below it, with an optimal distance

above the conference room table of 10-18 inches (25 – 45 cm). This provides

an optimum camera perspective for the far-end.

If the CS-700 unit is used in conjunction with a touch-screen or electronic

white board, the preferred installation location is immediately above the screen.

Bracket installation

Install the bracket with 4 appropriate screws on the wall, spacing two pair of

screws as far apart as possible. Ensure that the bracket is tight to the wall or

the spacers to avoid vibration. If installed below the display ensure that the

distance is big enough to fit the CS-700 unit. You can adjust the depth of the

installation by using the appropriate number of spacers (0-2) on each side.

Maximum mounting height is 2m / 6’ 8” from the floor. Always use 4 screws.

0x, 1x, 2x

≥ 3 ¾ in /

95 mm

13

Placing the CS-700 unit on the bracket

Position the CS-700 in such a way that the two hooks in the front of the

bracket fit into the cavities on the lower part of the CS-700. Ensure that the

CS-700 is safely held by the hooks.

Connecting the CS-700

Once the CS-700 is safely positioned on the hooks of the bracket, connect the

power cable and the USB cable to the CS-700 as shown. If it is planned to

manage the CS-700 using the web browser or as a SIP phone (-SP, -DS

models), also connect the network cable into the corresponding connector.

Secure the cables using the provided cable ties to the CS-700 unit.

14

Installing unit in Bracket

Once all cables are correctly connected and secured, tilt the CS-700 back on

the bracket and push it pack into the bracket.

Secure unit

Secure the CS-700 unit in the bracket with the provided machine screws.

15

Setting up the system

All connectors can be found on the back of the main CS-700 unit.

Connecting the Power

Connect one end of the power supply cable into the Power Connector on the

CS-700 back panel. Connect the other end of the Power Supply into your

country-specific power extension cable, and connect the cable into the mains

power. No power button is provided to ensure constant unit power; the CS-700

will immediately begin the boot-up sequence once the power connection is fully

made.

AUX-In

Power

Ethernet

Port

USB Port

Extension

Microphone

Multipurpose

USB Port

16

Connecting to a Computer – USB 3.0

Using the included USB 3.0 cable, connect the USB Type-B side of the cable

into the port identified by the icon on the back of the CS-700 unit.

Connect the other end of the cable to the USB 3.0 port on the computer

running the third party softphone, webinar, or conferencing application.

Connect the CS-700 USB cable directly into the attached PC device. If a USB

3.0 cable longer than the length of the one provided is required, please ensure

that extension cables are fully USB 3.0 compliant and certified for video

applications. Find a list of approved USB 3.0 extension cables in the appendix.

Be sure the PC USB Port supports USB 3.0. The camera of the CS-700 will

send an uncompressed 1080p HD image over HD 3.0.

Note: The CS-700 will also support USB 2.0 connections with a reduced image

resolution of 360p. If limited video quality is observed, verify that the

USB port on the PC is truly 3.0.

When connecting to the Host computer, the Host OS may need to install pre-

existing drivers provided with the operating system for use with the CS-700.

Wait until the installation of such drivers has completed before continuing.

For optimal audio performance when using a Windows computer, please follow

the instructions in the appendix section. No additional configuration is

required when using macOS or Chrome OS devices.

Select device

In your operating system select the “Yamaha AudioVideo Device” as your

default audio playback and recording device.

17

In your unified communications application, select the CS-700 as the Video

device.

Connecting to an IP Network for System Management and SIP

telephony

Note, the CS-700 does not require a network connection in order to operate.

The Plug-and-play nature of the USB connection is sufficient to enable the CS-

700 to function. However, if any network management features, including

network configuration, access to Web-UI, SNMP, and any SIP/VOIP

connectivity (model CS-700SP) is required, an IP Network Connection is

necessary.

Connect one end of the Ethernet cable into the network connection port on the

bottom of the base unit using the network port. Press the Ethernet connector

until it clicks into place. Connect the other end of the Ethernet cable into a

jack providing network access. The CS-700 does not support being powered

over PoE and requires power from the power supply.

If the Ethernet cable needs to be removed, depress the lever on the connector

and pull the cable out gently. Using force when removing this cable may

damage the cable and render it useless.

Discovering IP Address

The IP Address is assigned to the CS-700 either by the DHCP protocol, or

statically via the CS-700 configuration.

When using DHCP, the IP Address assigned to the CS-700 unit can be

discovered three ways.

• Audible IP Address Reporting. Depress and hold the “Volume-UP” and

“Bluetooth” buttons simultaneously for around 5 seconds. The CS-700

Unit will produce an audio-report of the currently assigned IP Address. If

no address is assigned, the unit will reply “No address found”.

18

• Connected PC via USB Cable, operating the “Service Application”. The

Service Application will provide a method of identifying the current IP

and MAC addresses of the CS-700 unit. The Service Application is used

by System Administrators.

• Interrogation of DHCP Server Leased IP Address List, and association

with MAC Addresses. Known CS-700 MAC addresses will provide a

remotely managed estate of CS-700 units to be mapped to IP Addresses.

Connecting Extension Microphone

The CS-700 offers wired or wireless Extension Microphone to extend reach of

microphone pick-up as an option. Connect the extension microphone into the

CS-700 connector where indicated. Only the Yamaha extension microphone is

qualified for operation on this port. The Wired Extension Microphone includes

a 25-feet (7.50 meter) cable.

Using Cable Management

To help secure the cables connected to the CS-700 main unit, indents are

provided on the back casing to support the included “hook-and-loop” cable ties.

Cables can be secured and tied-off on the back of the CS-700 to ensure robust

cable connections.

Adjusting Vertical Camera Angle

The CS-700 offers a manual vertical camera angle adjustment. This adjustment

is performed just once during initial unit installation, to properly align the

camera field of view with the table-top and conference participants. The

adjustment is made using a small/medium screwdriver inserted and pressed

into the adjustment hole on the left-side of the camera, then rotate the camera

My IP address

is …

19

assembly up or down to the desired angle. As the camera rotates, mechanical

detents within the camera mechanism will lock the camera into position. You

will hear clicking sounds as the detents engage.

Important Note - When adjusting the manual vertical camera angle do not force or

over stress the mechanism as this could damage the camera mechanism. The

mechanism will stop when it reaches the maximum adjustment, do not apply force

beyond the maximum adjustment. Damage to the camera mechanism caused by

excessive manual force will void warranty.

Procedure for camera angle adjustment

1. Connect a PC through the CS-700 USB cable, and enable UC software, a

local PC camera application, or the Service Application.

2. Engage the UC Software / PC application / Service Application to display

the CS-700 camera onto the local PC screen. This provides immediate

feedback as to how the room appears on the far-side of a video

conference.

3. Engage the Camera Vertical Angle Adjustment as described above to

achieve a well-aligned capture of meeting room participants around the

table. Alignment should balance participants in the middle of the video

shot.

Note: The camera angle is adjusted simply by rotating the camera assembly up

or down using the screwdriver shaft as a lever – there is no actual screw

to adjust.

Camera Angle Adjustment

20

User Interface

CS-700

The CS-700 unit provides volume up, volume down, audio mute, camera mute,

Bluetooth Pairing and Bluetooth NFC controls and indicators on the front of

the unit.

Volume Up/Down buttons affect the sound from the CS-700, with

corresponding increasingly or decreasingly loud “beeps” occurring with each

press.

The CS-700 will default the sound level to a pre-set value following each new

USB connection session.

Mute status is reflected on the color of the Mute Buttons.

• Audio microphone Mute not-enable is green, while enabled is red. The

button will be OFF whenever the button is disabled as a configuration

option.

• Camera Mute not-enabled is green, while enabled is red. The button will

glow white whenever the Camera is not active, and will be OFF whenever

the button is disabled as a configuration option.

CS-700 front panel audio controls (Volume, Mute) are synchronized with audio

controls on the attached Computer Operating System, enabling control from

both locations. See the section “Session Control Functionality Details” in the

appendix for more information.

Web User Interface (Web-UI)

The CS-700 supports an internal webserver and web-based user interface (i.e.

Web-UI), providing configuration and operations access to the unit using a

standard web browser. This interface is intended for use by System

Administrators, not end-users, and is only available through the IP network

interface. Using the IP address of the CS-700, the Web-UI can be accessed

using a web browser by entering the IP address in the URL line. Supported

browsers are Microsoft Edge, Google Chrome, and Mozilla Firefox.

La page charge ...

Yamaha CS-700 Mode d'emploi

Yamaha CS-700 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents