Dell SX2210T Mode d'emploi

Marque: Dell

Modèle: SX2210T

Catégorie: Haut-parleurs de la barre de son

Taper: Mode d'emploi

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/preface.htm[2020/2/10 08:22:37]

Dell™ SX2210T Flat Panel Monitor

User Guide

Setting the display resolution to 1920 x 1080 (Maximum)

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: DELL and the DELL logo are trademarks of Dell Inc; Microsoft, Windows, and Windows Vista are either

registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries; ENERGY STAR is a registered

trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the

ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their

products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model SX2210Tb

January 2020 Rev. A01

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/index.htm[2020/2/10 08:22:38]

Dell™ SX2210T Flat Panel Monitor User's Guide

About Your Monitor

Setting Up the Monitor

Operating the Monitor

Troubleshooting

Appendix

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: DELL and the DELL logo are trademarks of Dell Inc; Microsoft, Windows, and Windows Vista are either

registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries; ENERGY STAR is a registered

trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the

ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their

products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model SX2210Tb

January 2020 Rev. A01

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/optimal.htm[2020/2/10 08:22:39]

Back to Contents Page

Setting Up Your Monitor

Dell™ SX2210T Flat Panel Monitor

Setting the display resolution to 1920 x 1080 (Maximum)

For optimal display performance while using the Microsoft® Windows® operating systems, set the display resolution to

1920 x 1080 pixels by performing the following steps:

1. Right-click on the desktop and click Properties.

2. Select the Settings tab.

3. Move the slider-bar to the right by pressing and holding left-mouse button and adjust the screen resolution to 1920 X

1080.

4. Click OK.

If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Please choose the scenario

below that best describes the computer system you are using, and follow the provided directions:

1: If you have a Dell™ desktop or a Dell™ portable computer with internet access.

2: If you have a non Dell™ desktop, portable computer, or graphics card.

Back to Contents Page

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/about.htm[2020/2/10 08:22:40]

Back to Contents Page

About Your Monitor

Dell™ SX2210T Flat Panel Monitor User's Guide

Package Contents

Product Features

Identifying Parts and Controls

Monitor Specifications

Universal Serial Bus (USB) Interface

Plug and Play Capability

Camera - MIC Specifications

Maintenance Guidelines

Package Contents

Your monitor comes with all the items shown below. Ensure that you have all the items. If something is missing, contact Dell.

NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.

Monitor with stand

Power cable

Power adapter

VGA cable

DVI cable

USB up stream cable (enables USB ports, Webcam and

touch function on the monitor)

Documentation (Safety Information, Quick Start Guide,

and CD)

Cleaning cloth

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/about.htm[2020/2/10 08:22:40]

Product Features

The SX2210T flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include:

■ 21.5 inches (546.8 mm) diagonal.

■ 1920 X 1080 resolution, plus full-screen support for lower resolutions.

■ Touch sensitive-detects your finger or any other pointing device close to the screen.

■ Tilt adjustment capability.

■ Plug and play capability if supported by your system.

■ On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

■ Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), Touch Screen Tools software, Webcam Software, Facial Recognition Software, and product documentation.

■ Energy Saver feature for Energy Star compliance.

■ Security lock slot.

■ 2.0 Mega pixel internal webcam with integrated microphone.

Identifying Parts and Controls

Front View

Label Description

1-2

Shortcut keys (for more information, see Operating the Monitor

)

*The default settings are Preset Modes select and Brightness/Contrast select.

1 Preset Modes select

2 Brightness/Contrast select

3 OSD menu select

4 EXIT

5 Power button (with light indicator)

6 Webcam

7 Microphone

Back View

Back view Back View with monitor stand

Label Description Use

1 Barcode serial number label To contact Dell for technical support.

2 Security lock slot To help secure your monitor.

3 Dell soundbar mounting brackets To attach the optional Dell Soundbar.

4 USB downstream port To connect the USB cable.

5 Regulatory rating label Lists the regulatory approvals.

6 Cable management slot To organize cables by placing them through the slot.

Side View

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/about.htm[2020/2/10 08:22:40]

Left view Right view

Bottom View

Bottom view

Label Description

1 DC power cord connector

2 Audio Line-in

3 Audio Line-out

4 HDMI connector

5 DVI connector

6 VGA connector

7 USB upstream connector

8 USB downstream connector

Monitor Specifications

The following sections give you information about the various power management modes and pin assignments for various connectors of your monitor.

Power Management Modes

If you have VESA's compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode. If the computer detects input

from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:

VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption

Normal operation and USB active Active Active Active White 42 W (maximum)

Normal operation Active Active Active White

28 W (typical)

Active-off mode Inactive Inactive Blanked Amber

0.84 W

Switch off - - - Off

0.74 W

NOTE: The OSD functions in the 'Normal operation' mode. One of the following messages appears when the menu key is touched in Active-off mode.

Activate the computer and 'wake up' the monitor to gain access to the OSD

NOTE: This monitor is ENERGY STAR®-compliant.

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/about.htm[2020/2/10 08:22:40]

Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the power adapter.

Pin Assignments

VGA Connector

Number

15-pin Side of the Connected Signal Cable

1 Video-Red

2 Video-Green

3 Video-Blue

4 GND

5 Self-test

6 GND-R

7 GND-G

8 GND-B

9 Computer 5V

10 GND-sync

11 GND

12 DDC data

13 H-sync

14 V-sync

15 DDC clock

DVI Connector

Number

24-pin Side of the Connected Signal

Cable

1 TMDS RX2-

2 TMDS RX2+

3 TMDS Ground

4 Floating

5 Floating

6 DDC Clock

7 DDC Data

8 Floating

9 TMDS RX1-

10 TMDS RX1+

11 TMDS Ground

12 Floating

13 Floating

14 +5V power

15 Self test

16 Hot Plug Detect

17 TMDS RX0-

18 TMDS RX0+

19 TMDS Ground

20 Floating

21 Floating

22 TMDS Ground

23 TMDS Clock+

24 TMDS Clock-

HDMI Connector

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/about.htm[2020/2/10 08:22:40]

Number

19-pin Side of the Connected Signal

Cable

1 T.M.D.S. Data 2-

2 T.M.D.S. Data 2 Shield

3 T.M.D.S. Data 2+

4 T.M.D.S. Data 1+

5 T.M.D.S. Data 1 Shield

6 T.M.D.S. Data 1-

7 T.M.D.S. Data 0+

8 T.M.D.S. Data 0 Shield

9 T.M.D.S. Data 0-

10 T.M.D.S. Clock +

11 T.M.D.S. Clock Shield

12 T.M.D.S. Clock -

13 CEC

14 Reserved (N.C. on device)

15 SCL

16 SDA

17 DDC/CEC Ground

18 +5V Power

19 Hot Plug Detect

Universal Serial Bus (USB) Interface

This section gives you information about the USB ports that are available on the left side of your monitor.

NOTE: This monitor supports High-Speed Certified USB 2.0 interface

Transfer speed Data Rate Power Consumption

High speed 480 Mbps 2.5W (Max., each port)

Full speed 12 Mbps 2.5W (Max., each port)

Low speed 1.5 Mbps 2.5W (Max., each port)

USB Upstream Connector

Pin Number 4-pin Side of the connector

1 DMU

2 VCC

3 DPU

4 GND

USB Downstream Connector

Pin Number 4-Pin Side of the Signal Cable

1 VCC

2 DMD

3 DPD

4 GND

USB Ports

1 upstream at bottom

2 downstream at back & 1 downstream at bottom

NOTE: USB 2.0 functionality requires a USB 2.0-capable computer

NOTE: The monitor's USB interface works only when the monitor is on or in power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds to

resume normal functionality.

Camera - MIC Specifications

Overview

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/about.htm[2020/2/10 08:22:40]

The integrated USB camera and analog microphones allow you to take pictures, videos, and communicate with other computer users. The camera is located at the top of the monitor and is fixed. When the camera is on, the

white light next to the camera turns on.

Lens Field of view 66.2 degree +/- 5 %

Focus mode Fixed Focus

Focus area 37 cm~Infinity

Focusing distance (normal mode) 1.100 mm

Image Sensor Active array size 2.0 mega-pixel

Video specification

Video frame rate

1600 x 1200 (UXGA) - up to 10 frames per second

640 x 480 (VGA) and below - up to 30 frames per second

Image flip Horizontally

Audio Specification Microphone type Dual Microphone

Interface USB 2.0 high Speed

System Requirements

The following are the minimum system requirements for the Dell Webcam Software Suite:

Intel® Pentium® D 3.0 or AMD® Athlon 64 3200+ or higher

Microsoft® Windows® XP Service Pack 2 or Windows Vista® or Windows 7

512 MB RAM (1 GB RAM or higher recommended)

1 GB free hard disk space

Graphic card Intel 945 at least (Independent graphics card recommended)

Available USB 2.0 port or a USB 2.0 hub with external power supply

Dell Webcam Software Suite

The Dell Webcam Software Suite includes the following applications:

Dell TouchCam

Dell TouchCam enables convenient access to all exciting applications to enhance your Dell webcam experience. See Using the Camera

for details

Facial Recognition Software (FastAccess)

Face recognition technology greatly reduces the need to manually log in with passwords, while providing superior security and functionality compared to passwords and other biometrics (for Windows Vista® or

Windows 7 only). See Installing and Using the Facial Recognition Software (FastAccess)

for details.

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols

so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see

Operating the Monitor

Flat Panel Specifications

Screen type Active matrix - TFT LCD

Panel Type TN

Screen dimensions 21.5 inches (21.5-inch measured diagonally viewable image size)

Preset display area:

Horizontal:

Vertical:

476.64 mm (18.76 inches)

268.11 mm (10.56 inches)

Pixel pitch 0.248 mm

Viewing angle 160° (vertical) typical, 160° (horizontal) typical

Luminance output 220 CD/m² (typical)

Contrast ratio 1000:1 (typical)

Dynamic contrast ratio 50,000:1 (max)

Faceplate coating Anti-glare with hard-coating (3H)

Backlight CCFL edgelight system

Response Time 2 ms typical (Grey to Grey)

Color Depth 16.7 mil colors

Color Gamut 83%*

* SX2210T color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.

Touch Screen Specifications

Touch Technology

Optical touch

Touch Method Finger, stylus or any pointer.

Stylus Diameter Minimum 7 mm

Capabilities Mouse functionality—click, drag, double-click and right-click

Resolution 1073 Mpixel

Accuracy +/-2.5 mm over 95% of touchable area (Microsoft Windows 7 compliant)

Touch Activation Force No pressure required

Touch Durability Unlimited

Touch Response Time Typical response time 15 ms

Glass 2.5 mm chemically toughened glass

Touch Screen Compatibility

Function XP Vista Win7Starter

Win7Home

Basic

Win7Home

Premium

Win7 Ultimate Win7Pro Win7Enterprise

Other Operating

Systems

Single-touch - Yes Yes Yes Yes Yes Yes Yes -

Multi-touch (two points) - - - - Yes Yes Yes Yes -

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/about.htm[2020/2/10 08:22:40]

Resolution Specifications

Horizontal scan range 30 kHz to 83 kHz (automatic)

Vertical scan range 50 Hz to 76 Hz (automatic)

Optimal preset resolution 1920 x 1080 at 60 Hz

Highest preset resolution 1920 x 1080 at 60 Hz

Video Supported Modes

Video display capabilities (DVI playback) 480i/480p/576i/576p/720p/1080i/1080p (Supports HDCP)

Preset Display Modes

Display Mode Horizontal

Frequency

(kHz)

Vertical

Frequency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(Horizontal/Vertical)

640 x 350 31.47 70.09 25.18 +/-

640 x 400 31.47 70.09 25.18 -/+

640 x 480 31.47 59.94 25.17 -/-

640 x 480 31.50 75.00 31.5 -/-

720 x 400 31.47 70.08 28.32 -/+

800 x 600 37.88 60.32 40.00 +/+

800 x 600 46.880 75.00 49.50 +/+

1024 x 768 48.36 60.00 65.00 -/-

1024 x 768 60.02 75.03 78.75 +/+

1152 x 864 67.50 75.00 108.00 +/+

1280 x 1024 63.98 60.02 108.00 +/+

1280 x 1024 79.98 75.02 135.00 +/+

1920 x 1080-R 66.587 59.934 138.50 +/-

1920 x 1080 55.62 49.92 141.50 -/+

Electrical Specifications

Video input signals

Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance

Digital DVI-D TMDS, HDMI, 600mV for each differential line, positive polarity at 50 ohm

input impedance

Audio Input and Output signals Input signal level: 1Vrms without chipping

Synchronization input signals

Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite

SYNC on green)

AC/DC Adaptor input voltage/frequency/current

100 to 240 VAC/50 or 60 Hz +

3 Hz/1.6A (Max.)

For use only with power supply DELL, DA65NS4-00.

Inrush current

120 V: 30 A (Max.)

240 V: 60 A (Max.)

Physical Characteristics

Connector type 15-pin D-sub miniature, blue connector; DVI-D, white connector; HDMI, Black connector

Signal cable type

Digital: Detachable, DVI-D, Solid pins, shipped detached from the monitor

Analog: Detachable, D-Sub, 15pins, shipped attached to the monitor

HDMI: Detachable, HDMI-A, Solid pins, shipped without cable

Dimensions (with stand)

Height 401.8 mm (15.82 inches)

Width 551.5 mm (21.71 inches)

Depth 194.3 mm (7.61 inches)

Dimensions (without stand)

Height 342.1 mm (13.47 inches)

Width 551.5 mm (21.71 inches)

Depth 92.3 mm (3.63 inches)

Stand dimensions

Height 257.5 mm (10.14 inches)

Width 228.7 mm (9.00 inches)

Depth 193.4 mm (7.61 inches)

Weight

Weight with packaging 9.11 kg (20.04 lbs)

Weight with stand assembly and cables 7.68 kg (16.90 lbs)

Weight without cable assembly 6.98 kg (15.36 lbs)

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/about.htm[2020/2/10 08:22:40]

Weight of stand assembly 1.93 kg (4.25 lbs)

Environmental Characteristics

Temperature

Operating 0° to 40° C (32° to 104°F)

Non-operating

Storage: -20° to 60° C (-4° to 140° F)

Shipping: -20° to 60° C (-4° to 140° F)

Humidity

Operating 10% to 80% (non-condensing)

Non-operating

Storage: 20% to 80% (non-condensing)

Shipping: 20% to 80% (non-condensing)

Altitude

Operating 3,657.60 m (12,000 ft) max

Non-operating 12,192 m (40,000 ft) max

Thermal dissipation

222.3 BTU/hour (maximum)

188.1 BTU/hour (typical)

Maintenance Guidelines

Cleaning Your Monitor

CAUTION: Read and follow the safety instructions before cleaning the monitor.

CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:

To clean your touch screen, use the supplied soft, clean cloth. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air. Avoid wiping the top corners of the monitor where the optics are located.

Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.

Handle your monitor with care; any scratch on the monitor will show scuff marks.

To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.

Back to Contents Page

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/setup.htm[2020/2/10 08:22:42]

Back to Contents Page

Setting Up the Monitor

Dell™ SX2210T Flat Panel Monitor User's Guide

Connecting the Monitor

Organizing Your Cables

Attaching the Soundbar (Optional)

Connecting Your Monitor

CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.

NOTE: USB uplink cable needs to be connected for touch function; intergrated camera and microphone to work.

To connect your monitor to the computer:

1. Turn off your computer and disconnect the power cable.

2. Connect the HDMI cable, white (digital DVI-D), or blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use

all the cables on the same computer. Use all of the cables only when they are connected to different computers with appropriate video systems.

Connecting the Blue VGA Cable

Connecting the White DVI Cable

Connecting the HDMI Cable

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/setup.htm[2020/2/10 08:22:42]

NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary.

Connecting the USB Cable

After you have completed connecting the DVI/VGA/HDMI cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup:

1. Connect the downstream USB connector (cable supplied) to an appropriate USB connector on your computer.

2. Connect USB peripherals to the upstream USB connectors on the monitor.

3. Plug the power cables for your computer and monitor into a nearby outlet.

4. Turn on the monitor and the computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems

5. Use the cable holder on the monitor stand to organize the cables.

Organizing Your Cables

After attaching all necessary cables to your monitor and computer, (see Connecting Your Monitor) use the cable management slot to organize all cables as shown above.

Attaching the Soundbar (Optional)

NOTICE: Do not use with any device other than the Dell Soundbar.

To attach the soundbar:

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/setup.htm[2020/2/10 08:22:42]

1. Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.

2. Slide the Soundbar to the left until it snaps into place.

3. Connect the Soundbar with the DC power connector from the Soundbar Power adapter.

4. Insert the mini stereo plug from the back of the Soundbar into the computer's audio output jack.

Back to Contents Page

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/operate.htm[2020/2/10 08:22:45]

Back to Contents Page

Operating the Monitor

Dell™ SX2210T Flat Panel Monitor User's Guide

Turn On the Monitor

Using the Front Panel Controls

Using the On-Screen Display (OSD) Menu

Setting the Maximum Resolution

Using the Dell Soundbar (Optional)

Using the Tilt

Using the Camera

Installing and Using the Facial Recognition Software (FastAccess)

Using the Touch Screen

Turn On the Monitor

Press the button to turn on the monitor

Using the Front Panel Controls

Use the buttons on the front of the monitor to adjust the image settings.

Front panel button Description

Preset modes

Use the Preset modes button to choose from a list of preset color modes. See Using the OSD Menu.

Brightness / Contrast

Use the Brightness / Contrast button to direct access to the "Brightness" and "Contrast" control menu.

Use the Menu button to open the on-screen display OSD).

Exit

Use the Exit button to exit on-screen display (OSD) from menu and sub-menus.

Front panel button

Use the buttons on the side of the monitor to adjust the image settings.

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/operate.htm[2020/2/10 08:22:45]

Front panel Button Description

Use the Up button to adjust (increase ranges) items in the OSD menu.

Down

Use the Down button to adjust (decrease ranges) items in the OSD menu.

Use the OK button to confirm your selection.

Back

Use the back button to go back to the main menu.

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves the changes. The changes are also saved if

you change the settings and then wait for the OSD menu to disappear.

Press any key to launch the OSD menu and press

to display the main menu.

Main Menu

Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.

To select the highlighted item on the menu press the

again.

Press the and buttons to select the desired parameter.

Press the buttons to enter the slide bar and then use the or button, according to the indicators on the menu, to make your changes.

Select the

to return to previous menu without accepting current settings or to accept and return to previous menu.

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/operate.htm[2020/2/10 08:22:45]

The table below provides a list of all the OSD menu options and their functions.

Icon Menu and Submenus Description

BRIGHTNESS/CONTRAST Use the Brightness and Contrast menu to adjust the Brightness/Contrast.

Back

Press the button to go back to the main menu.

Brightness Allows you to adjust the brightness or luminance of the backlight.

Press the

button to increase brightness and press the button to decrease brightness (min 0 ~ max 100).

Contrast Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness

first, and adjust contrast only if you need further adjustment.

Press the button to increase contrast and press the button to decrease contrast (min 0 ~ max 100).

Auto Adjust Use this button to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self-adjusts

to the current input:

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your

monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.

NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.

Input Source Use the Input Source menu to select different video signals that may be connected to your monitor.

Press the button to go back to the main menu

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/operate.htm[2020/2/10 08:22:45]

Select VGA input when you are using the analog (VGA) connector. Press the

button to select the VGA input source.

Select DVI-D input when you are using the digital (DVI) connector. Press the

button to select the DVI input source.

Select HDMI input when you are using the digital (HDMI) connector. Press the

button to select the HDMI input source.

Select Auto select to let the monitor search for available input signals.

COLOR SETTINGS Use the Color Setting menu to adjust the monitor's color settings.

Color setting mode

submenu

Back

Press the button to go back to the main menu.

Input Color Format Allows you to set the video input mode to:

RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI

adapter.

YPbPr: Select this option if your DVD player supports only YPbPr output.

Mode Selection Allows you to set the display mode to:

Graphics: Select this mode if your monitor is connected to your computer.

Video: Select this mode if your monitor is connected to a DVD player.

NOTE: Depending upon the Display Mode, select the Preset Modes available for your monitor change.

Preset Mode Allows you to choose from a list of preset color modes.

In the Graphics mode, you can set the color to the following preset values:

Standard: Loads the monitor's default color settings. This is the default preset mode.

Multimedia: Loads color settings ideal for multimedia applications.

Game: Loads color settings ideal for most gaming applications.

Warm: Increase the color temperature. The screen appears warmer with a red/yellow tint.

Cool: Decreases the color temperature. The screen appears cooler with a blue tint.

Custom (RGB): Allows you to manually adjust the color settings. Press the and buttons to adjust the Red, Green, and

Blue values and create your own preset color mode.

In the Video mode, you can set the color to the following preset values:

Movie: Loads color settings ideal for movies. This is the default preset mode.

Game: Loads color settings ideal for most gaming applications.

Sports: Loads color settings ideal for sports.

Nature: Loads color settings ideal for nature.

Hue

Allows you to adjust the skin tone of the image. Use or button to adjust the hue from '0' to '100'.

NOTE: Hue adjustment is available only in the Video mode.

Saturation

Allows you to adjust the color saturation of the image. Use or button to adjust the saturation from '0' to '100'.

NOTE: Saturation adjustment is available only in the Video mode.

Demo Mode Vertically splits the screen into two segments. The left half of the screen in the normal mode and the right half of the screen is displayed

in the color enhanced mode.

Dell SX2210T Flat Panel Monitor

file:///E|/LCD%20Monitor%20OEM/Dell-2012/2009_project_revise_in2020/SX2210T_2020update/A01_HTML/en/ug/operate.htm[2020/2/10 08:22:45]

NOTE: Demo Mode is only available for video input.

Reset Color Settings Resets your monitor's color settings to the factory defaults.

DISPLAY SETTINGS

Display setting mode

submenu

Back

Press the button to go back to the main menu.

Horizontal position

Use the

and buttons to adjust image left and right (min 0 ~ max 100).

NOTE: When using DVI or HDMI source, the Horizontal Position setting is not available.

Vertical Position

Use the and buttons to adjust image up and down (min 0 ~ max 100).

NOTE: When using DVI or HDMI source, the Vertical Position setting is not available.

Pixel Clock

The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the

main OSD menu, by selecting 'Display Settings'.

Use the

and buttons to adjust for best image quality.

Phase If satisfactory results are not obtained using the phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine).

NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.

Sharpness

Allows you to increase or decrease the sharpness of the image.

Use

and buttons to adjust the sharpness from '0' to '100'.

Dynamic Contrast The dynamic contrast helps get a higher contrast if you choose Game preset, Movie preset, Sports preset and Nature preset.

Use the button to enable the Dynamic Contrast adjustment.

Use the

button to disable the Dynamic Contrast adjustment.

NOTE: Brightness control is disabled in Dynamic Contrast mode.

Response Time Response time is the time required for an LCD pixel to change from fully active (black) to fully inactive (white), then back to fully active

again.

You can set the response time to:

Normal

Overdrive (default).