Winmate PT Series Manuel utilisateur

Marque
Winmate
Modèle
PT Series
Catégorie
Téléviseurs
Taper
Manuel utilisateur

Ce manuel convient également à

Please read these instructions carefully before using this product, and save this manual for future use.
PT Series Display
15”/ 15.6”/ 18.5”/ 32”
Model No. R15L100-PTC3
W15L100-PTA3
W18L100-PTA2(HB)
W32L100-PTA2
User Manual
Document Version 1.1
Document Part Number: 91521110105R
2 PT Series Display User Manual
Contents
Preface 3
About This User Manual 6
Chapter 1: Introduction 7
1.1 Overview 8
1.2 Product Features 8
1.3 Package Contents 8
1.4 Product Overview 9
1.5 Control Buttons and LED Indicators 11
Chapter 2: Installation 14
2.1 Wiring Requirements 15
2.2 Mounting Guide 15
2.3 Cable Mounting Considerations 17
2.4 Connecting Power 17
2.5 Connecting Peripherals 18
2.6 Connector Description 19
2.6.1 VGA Connector 19
2.6.2 HDMI Connector 19
2.6.3 USB for Touch 19
2.6.4 RS-232 for Remote Control 20
2.7 Turning on the System 20
Chapter 3: Operating the Device 21
3.1 OSD Menu Navigation 22
3.2 Troubleshooting Guide 23
Appendix 24
Appendix A: Technical Specifications 25
Appendix B: Frequency Table 26
3 Preface
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or
by any means, electronic or mechanical, for any purpose, without the prior written permission
of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits and/or
software described or contained in this manual in order to improve design and/or performance.
We assume no responsibility or liability for the use of the described product(s) conveys no
license or title under any patent, copyright, or masks work rights to these products, and make
no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described in this
manual are for illustration purposes only. We make no representation or guarantee that such
application will be suitable for the specified use without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and workmanship
defects for a period of one year from the invoice date. If the customer discovers a defect, we
will, at his/her option, repair or replace the defective product at no charge to the customer,
provide it is returned during the warranty period of one year, with transportation charges
prepaid. The returned product must be properly packaged in its original packaging to obtain
warranty service. If the serial number and the product shipping data differ by over 30 days, the
in-warranty service will be made according to the shipping date. In the serial numbers the third
and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,
with A for October, B for November and C for December).
For example, the serial number 1W20Axxxxxxxx means October of year 2020.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of
our distributor to find the update information about the product. Second, contact with your
distributor, sales representative, or our customer service center for technical support if you
need additional assistance.
You may need the following information ready before you call:
• Product serial number
• Software (OS, version, application software, etc.)
• Description of complete problem
• The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are
always ready to give advice on application requirements or specific information on the
installation and operation of any of our products.
4 PT Series Display User Manual
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or
to alert you to the potential for hardware damage or personal injury. These are Notes,
Important, Cautions, and Warnings. The following is an example of each type of advisory.
Note:
A note is used to emphasize helpful information
Important:
An important note indicates information that is important for you to know.
Caution A Caution alert indicates potential damage to hardware and
explains how to avoid the potential problem.
Attention Unealerted’ attention indique un dommage possible à
l’équipement et explique comment éviter le problem potentiel.
Warning! An Electrical Shock Warning indicates the potential harm from
electrical hazards and how to avoid the potential problem.
Avertissement! Un Avertissement de Choc Électriqueindique le potentiel
de chocssur des emplacements électriques et comment éviterces problèmes.
Alternating Current The Protective Conductor Terminal (Earth Ground)
symbol indicates the potential risk of serious electrical shock due to improper
grounding.
Mise à la Terre Le symbole de Miseà Terre indique le risqué potential de
choc électrique grave à la terre incorrecte.
5 Preface
Safety Information
Warning!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by sudden
power surges. Only experienced electronics personnel should open the PC
chassis.
Avertissement! Toujours débrancher le cordon d’alimentation du chassis
lorsque vous travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques sensibles
peuvent être endommagées par des sauts d’alimentation. Seulement du
personnel expérimenté devrait ouvrir ces chassis.
Caution
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very sensitive to static
electric charges. As a safety precaution, use a grounding wrist strap at all
times. Place all electronic components in a static-dissipative surface or static-
shielded bag when they are not in the chassis.
Attention Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements électroniques
moderns sont très sensibles aux décharges d’électricité statique. Toujours
utiliser un bracelet de mise à la terre comme précaution. Placer toutes les
composantes électroniques sur une surface conçue pour dissiper les charge,
ou dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep this
user manual for future reference.
• Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid
or spray detergents for cleaning. Use a damp cloth.
• For pluggable equipment, the power outlet must be installed near the equipment and
must be easily accessible.
• Keep this equipment away from humidity.
• Put this equipment on a reliable surface during installation. Dropping it or letting it fall
could cause damage.
• The openings on the enclosure are for air convection and to protect the equipment from
overheating.
• Before connecting the equipment to the power outlet make sure the voltage of the power
source is correct.
• Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
• If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over-voltage.
• Never pour any liquid into an opening. This could cause fire or electrical shock.
• Never open the equipment. For safety reasons, only qualified service personnel should
open the equipment.
• All cautions and warnings on the equipment should be noted.
• Always ground yourself to remove any static charge before touching the board.
6 PT Series Display User Manual
About This User Manual
This User Manual provides information about using the Winmate® PT Series Display. The
documentation set provides information for specific user needs, and includes:
• PT Series Display User Manual – contains detailed description on how to use the
display, its components and features.
Note: Some pictures in this guide are samples and can differ from actual
product.
Document Revision History
Version Date Note
1.0 2-Mar-2020 New document release.
7 0BChapter 1: Introduction
Chapter 1: Introduction
This chapter gives you product overview, describes features and hardware
specification. You will find all accessories that come with the device in the packing list.
Mechanical dimensions and drawings included in this chapter.
8 PT Series Display User Manual
1.1 Overview
Congratulations on purchasing Winmate® PT Series Display. Versatile display in a chassis
standalone housing designed for wall and VESA mounting with integrated bracket design for
industrial and commercial applications.
1.2 Product Features
Winmate® PT Series Display features:
• 15”/ 15.6”/ 18.5”/ 32” TFT LCD
• 1 x HDMI, 1 x VGA
• USB for touch
• Chassis housing
• Supports VESA mount
• Suitable for industrial and commercial applications
1.3 Package Contents
Carefully remove the box and unpack your display. Please check if all the items listed below
are inside your package. If any of these items are missing or damaged contact us immediately.
Factory shipment list:
• Display
• 110~240V AC Power
Adapter
Varies by product
Varies by product
• Power Cord
• HDMI Cable
Varies by country
Part No. 94E0190190P3
• USB Cable for Touch
Part No. 948018102100
9 0BChapter 1: Introduction
1.4 Product Overview
This section describes physical appearance of the PT Series Display.
Note: Notice that standard input terminals include VGA and HDMI. Your device
may be equipped with DVI, S-Video or Composite input terminals based on your
order.
Note: All dimensions in the drawing below has tolerance ± 1 mm.
15”, R15L100-PTC3
Unit: mm
Dimensions: 352.5x 276.7 x 45
№ Description № Description
①
12V DC in
④
HDMI
②
Audio in
⑤
USB for Touch
③
VGA
10 PT Series Display User Manual
15.6”, W15L100-PTA3
Unit: mm
Dimensions:388 x 233 x 40
№ Description № Description
①
VGA
⑤
USB for Touch
②
HDMI
⑥
Power LED Indicator
③
Audio-in
7 key OSD Panel
④
12V DC in
18.5”, W18L100-PTA2 (HB)
Unit: mm
Dimensions: 467 x 305 x 35
11 0BChapter 1: Introduction
№ Description № Description
①
USB for Touch
④
12V DC (Power Jack)
②
VGA
⑤
5 Key OSD Buttons
③
HDMI
32”, W32L100-PTA2
Unit: mm
Dimensions:799 x 478 x 63.7
№ Description № Description
①
12V DC in
④
USB for Touch
②
VGA
⑤
RS-232 (Optional)
③
HDMI
1.5 Control Buttons and LED Indicators
Control Buttons and LED Indicators are located on the OSD control panel on the rear side of
the device. OSD Control Panel varies by product specifications.
Note:
The type of the OSD control panel varies by product. Please refer to your
product specifications for more details.
12 PT Series Display User Manual
Type A OSD control panel (7 Key)
Type B OSD control panel (5 Key)
Icon Function
Press to decrease the value / Select up.
Press to increase the value / Select down.
Press to power on or power off the device.
Press to Exit / Auto adjustment.
Press to Enter / Call main OSD menu.
Power LED- Lights up in "Green" when the monitor turns on.
Stand by - Lights up "Orange" when the device cannot detect any input
source.
Icon
Function
Press to ENTER.
Press to EXIT.
Press to move RIGHT in the navigation menu.
Press to move LEFT in the navigation menu.
Press to move UP in the navigation menu.
Press to move DOWN in the navigation menu.
Press to power on or power off the device.
13 0BChapter 1: Introduction
Type C OSD Control Panel (5 Key)
Icon
Function
Select left.
Select right / Call main OSD menu.
Decrease the value / Select up.
Increase the value / Select down.
Power switch.
14 PT Series Display User Manual
Chapter 2: Installation
This chapter provides hardware installation instructions and mounting guide for all
available mounting options. Pay attention to cautions and warning to avoid any
damages.
15 1BChapter 2: Installation
2.1 Wiring Requirements
The following common safety precautions should be observed before installing any electronic
device:
• Strive to use separate, non-intersecting paths to route power and networking wires. If
power wiring and device wiring paths must cross make sure the wires are perpendicular
at the intersection point.
• Keep the wires separated according to interface. The rule of thumb is that wiring that
shares similar electrical characteristics may be bundled together.
• Do not bundle input wiring with output wiring. Keep them separate.
• When necessary, it is strongly advised that you label wiring to all devices in the system.
• Do not run signal or communication wiring and power wiring in the same conduit. To
avoid interference, wires with different signal characteristics (i.e., different interfaces)
should be routed separately.
• Be sure to disconnect the power cord before installing and/or wiring your device.
• Verify the maximum possible current for each wire gauge, especially for the power cords.
Observe all electrical codes dictating the maximum current allowable for each wire
gauge.
• If the current goes above the maximum ratings, the wiring could overheat, causing
serious damage to your equipment.
Be careful when handling the unit. When the unit is plugged in, the internal components
generate a lot of heat which may leave the outer casing too hot to touch.
2.2 Mounting Guide
The PT Series Display can be applied for several different installation methods, including wall
mount, VESA mount. Refer to sub-sections below for more details.
Caution Follow mounting instructions and use recommended mounting
hardware to avoid the risk of injury.
Attention Suivez les instructions de montage et d'utilisation recommandé le
matériel de montage pour éviter le risque de blessure.
PT Series Display comes with VESA Mount holes for mounting. Winmate provides VESA
mounting kit by request.
VESE plate dimensions and screw size:
Size
VESA Plate
Screw Size
15” 75x75 mm, 100x100 mm M4, D=5
15.6” 75x75 mm, 100x100 mm M4, D=5
18.5” 75x75 mm, 100x100 mm M4, D=5
32” 200x200 mm, 200x100 mm M6, D=10
16 PT Series Display User Manual
VESA Mount Installation Instruction
1. Screw VESA bracket to the fixture (ex. desk stand) with four VESA screws.
2. Place the device on VESA bracket.
Notice: VESA stand and mounting kit are not provided by Winmate.
17 1BChapter 2: Installation
2.3 Cable Mounting Considerations
For a nice look and safe installation, make sure cables are neatly hidden behind the device.
Caution Observe all local installation requirements for connection cable type
and protection level.
Attention Suivre tous les règlements locaux d’installations, de câblage et
niveaux de protection.
Caution
Turn off the device and disconnect other peripherals before
installation.
Attention Éteindre l’appareil et débrancher tous les périphériques avant
l’installation.
2.4 Connecting Power
This section provides information on how to use connectors on the PT Series Display. Be
cautious while working with these modules. Please carefully read the content of this chapter in
order to avoid any damages.
Installation instruction:
1. Connect the AC cord to the AC IN terminal on the AC adaptor.
2. Connect the DC OUT terminal of the AC adaptor to the DC IN terminal on the monitor.
3. Align the notch on the cord connector with the guiding groove and plug it in.
4. Connect the AC cord plug to the power outlet.
18 PT Series Display User Manual
2.5 Connecting Peripherals
The panel control port is designed for monitors that work with a variety of compatible video
sources. Due to the possible deviations between these signal sources, you may have to make
adjustments to the monitor settings from the OSD menu when switching between these
sources.
Note: Notice that standard input terminals include VGA and HDMI.
Your device may be equipped with additional input terminals based on
your order.
Use VGA or HDMI cable to connect your display to external device.
19 1BChapter 2: Installation
2.6 Connector Description
2.6.1 VGA Connector
PT Series Display uses standard 15pin D-sub connector. Plug 15-pin VGA signal cable to the
VGA connector in the rear of motherboard, and plug the other end to the monitor. Secure cable
connectors with hexagonal copper pillars M3x4mm.
Pin assignment and signal names for VGA connector
2.6.2 HDMI Connector
PT Series Display uses standard HDMI connector. Plug HDMI signal cable to the HDMI
connector on the rear side of PC system, and plug the other end to the monitor.
Pin assignment and signal names for HDMI connector
2.6.3 USB for Touch
PT Series Display uses USB port for touch capabilities. Use USB cable to connect display to
touch.
Pin assignment and signal name of USB port for touch
Pin №
Signal Name
Pin №
Signal Name
1
RED
2
GREEN
3
BLUE
4
NC
5
GND
6
AGND
7
AGND
8
AGND
9
VGA_5V
10
GND
11
NC
12
DDCSDA
13
H Sync
14
V Sync
15
DDCSCL
Pin №
Signal Name
Pin №
Signal Name
1
HDMI_RX2+
2
GND
3
HDMI_RX2-
4
HDMI_RX1+
5
GND
6
HDMI_RX1-
7
HDMI_RX0+
8
GND
9
HDMI_RX0-
10
HDMI_RXC+
11
GND
12
HDMI_RXC-
13
HDMI_CON_CEC
14
NC
15
HDMI_CON_SCL
16
HDMI_CON_SDA
17
GND
18
+5V_HDMI
19
HDMI_CON_HP
Pin No.
Signal Name
Pin No.
Signal Name
1
+5V
2
Data-
3
Data+
4
GND
20 PT Series Display User Manual
2.6.4 RS-232 for Remote Control
Notice that RS-232 terminal for remote control is an optional connector of PT Series Display
and may not be present in your device.
Pin assignment and signal name of RS-232 terminal
2.7 Turning on the System
To turn on the system:
1. Connect the power adapter cable to the DC IN of the display.
2. Connect the power cord to the power adapter.
3. Connect the power cord to a power outlet.
4. Press the power button located on the OSD control panel on the rear to turn on the
system.
Pin No.
Signal Name
Signal Name
1
CD
NC (no connection)
2
RXD
Transmission data
3
TXD
Reception data
4
DTR
Data terminal ready
5
GND
GND
6
DSR
Data set ready
7
RTS
Request to send
8
CTS
Short circuit at pin 7 on the
monitor
9
RI
NC (no connection)
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Winmate PT Series Manuel utilisateur

Marque
Winmate
Modèle
PT Series
Catégorie
Téléviseurs
Taper
Manuel utilisateur
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes